Struct bgfx_rs::static_lib::ResetFlags
source · [−]pub struct ResetFlags { /* private fields */ }
Implementations
sourceimpl ResetFlags
impl ResetFlags
sourcepub const FULLSCREEN: Self = Self{bits: bgfx_sys::BGFX_RESET_FULLSCREEN as _,}
pub const FULLSCREEN: Self = Self{bits: bgfx_sys::BGFX_RESET_FULLSCREEN as _,}
Not supported yet.
sourcepub const MAXANISOTROPY: Self = Self{bits: bgfx_sys::BGFX_RESET_MAXANISOTROPY as _,}
pub const MAXANISOTROPY: Self = Self{bits: bgfx_sys::BGFX_RESET_MAXANISOTROPY as _,}
Turn on/off max anisotropy.
sourcepub const FLUSH_AFTER_RENDER: Self = Self{bits: bgfx_sys::BGFX_RESET_FLUSH_AFTER_RENDER as _,}
pub const FLUSH_AFTER_RENDER: Self = Self{bits: bgfx_sys::BGFX_RESET_FLUSH_AFTER_RENDER as _,}
Flush rendering after submitting to GPU.
sourcepub const FLIP_AFTER_RENDER: Self = Self{bits: bgfx_sys::BGFX_RESET_FLIP_AFTER_RENDER as _,}
pub const FLIP_AFTER_RENDER: Self = Self{bits: bgfx_sys::BGFX_RESET_FLIP_AFTER_RENDER as _,}
This flag specifies where flip occurs. Default behaviour is that flip occurs
before rendering new frame. This flag only has effect when BGFX_CONFIG_MULTITHREADED=0
.
sourcepub const SRGB_BACKBUFFER: Self = Self{bits: bgfx_sys::BGFX_RESET_SRGB_BACKBUFFER as _,}
pub const SRGB_BACKBUFFER: Self = Self{bits: bgfx_sys::BGFX_RESET_SRGB_BACKBUFFER as _,}
Enable sRGB backbuffer.
sourcepub const DEPTH_CLAMP: Self = Self{bits: bgfx_sys::BGFX_RESET_DEPTH_CLAMP as _,}
pub const DEPTH_CLAMP: Self = Self{bits: bgfx_sys::BGFX_RESET_DEPTH_CLAMP as _,}
Enable depth clamp.
sourcepub const fn from_bits(bits: u32) -> Option<Self>
pub const fn from_bits(bits: u32) -> Option<Self>
Convert from underlying bit representation, unless that representation contains bits that do not correspond to a flag.
sourcepub const fn from_bits_truncate(bits: u32) -> Self
pub const fn from_bits_truncate(bits: u32) -> Self
Convert from underlying bit representation, dropping any bits that do not correspond to flags.
sourcepub const unsafe fn from_bits_unchecked(bits: u32) -> Self
pub const unsafe fn from_bits_unchecked(bits: u32) -> Self
Convert from underlying bit representation, preserving all bits (even those not corresponding to a defined flag).
Safety
The caller of the bitflags!
macro can chose to allow or
disallow extra bits for their bitflags type.
The caller of from_bits_unchecked()
has to ensure that
all bits correspond to a defined flag or that extra bits
are valid for this bitflags type.
sourcepub const fn intersects(&self, other: Self) -> bool
pub const fn intersects(&self, other: Self) -> bool
Returns true
if there are flags common to both self
and other
.
sourcepub const fn contains(&self, other: Self) -> bool
pub const fn contains(&self, other: Self) -> bool
Returns true
if all of the flags in other
are contained within self
.
sourcepub fn set(&mut self, other: Self, value: bool)
pub fn set(&mut self, other: Self, value: bool)
Inserts or removes the specified flags depending on the passed value.
sourcepub const fn intersection(self, other: Self) -> Self
pub const fn intersection(self, other: Self) -> Self
Returns the intersection between the flags in self
and
other
.
Specifically, the returned set contains only the flags which are
present in both self
and other
.
This is equivalent to using the &
operator (e.g.
ops::BitAnd
), as in flags & other
.
sourcepub const fn union(self, other: Self) -> Self
pub const fn union(self, other: Self) -> Self
Returns the union of between the flags in self
and other
.
Specifically, the returned set contains all flags which are
present in either self
or other
, including any which are
present in both (see Self::symmetric_difference
if that
is undesirable).
This is equivalent to using the |
operator (e.g.
ops::BitOr
), as in flags | other
.
sourcepub const fn difference(self, other: Self) -> Self
pub const fn difference(self, other: Self) -> Self
Returns the difference between the flags in self
and other
.
Specifically, the returned set contains all flags present in
self
, except for the ones present in other
.
It is also conceptually equivalent to the “bit-clear” operation:
flags & !other
(and this syntax is also supported).
This is equivalent to using the -
operator (e.g.
ops::Sub
), as in flags - other
.
sourcepub const fn symmetric_difference(self, other: Self) -> Self
pub const fn symmetric_difference(self, other: Self) -> Self
Returns the symmetric difference between the flags
in self
and other
.
Specifically, the returned set contains the flags present which
are present in self
or other
, but that are not present in
both. Equivalently, it contains the flags present in exactly
one of the sets self
and other
.
This is equivalent to using the ^
operator (e.g.
ops::BitXor
), as in flags ^ other
.
sourcepub const fn complement(self) -> Self
pub const fn complement(self) -> Self
Returns the complement of this set of flags.
Specifically, the returned set contains all the flags which are
not set in self
, but which are allowed for this type.
Alternatively, it can be thought of as the set difference
between Self::all()
and self
(e.g. Self::all() - self
)
This is equivalent to using the !
operator (e.g.
ops::Not
), as in !flags
.
Trait Implementations
sourceimpl Binary for ResetFlags
impl Binary for ResetFlags
sourceimpl BitAnd<ResetFlags> for ResetFlags
impl BitAnd<ResetFlags> for ResetFlags
type Output = ResetFlags
type Output = ResetFlags
The resulting type after applying the &
operator.
sourceimpl BitAndAssign<ResetFlags> for ResetFlags
impl BitAndAssign<ResetFlags> for ResetFlags
sourcefn bitand_assign(&mut self, other: Self)
fn bitand_assign(&mut self, other: Self)
Disables all flags disabled in the set.
sourceimpl BitOr<ResetFlags> for ResetFlags
impl BitOr<ResetFlags> for ResetFlags
sourcefn bitor(self, other: ResetFlags) -> Self
fn bitor(self, other: ResetFlags) -> Self
Returns the union of the two sets of flags.
type Output = ResetFlags
type Output = ResetFlags
The resulting type after applying the |
operator.
sourceimpl BitOrAssign<ResetFlags> for ResetFlags
impl BitOrAssign<ResetFlags> for ResetFlags
sourcefn bitor_assign(&mut self, other: Self)
fn bitor_assign(&mut self, other: Self)
Adds the set of flags.
sourceimpl BitXor<ResetFlags> for ResetFlags
impl BitXor<ResetFlags> for ResetFlags
sourcefn bitxor(self, other: Self) -> Self
fn bitxor(self, other: Self) -> Self
Returns the left flags, but with all the right flags toggled.
type Output = ResetFlags
type Output = ResetFlags
The resulting type after applying the ^
operator.
sourceimpl BitXorAssign<ResetFlags> for ResetFlags
impl BitXorAssign<ResetFlags> for ResetFlags
sourcefn bitxor_assign(&mut self, other: Self)
fn bitxor_assign(&mut self, other: Self)
Toggles the set of flags.
sourceimpl Clone for ResetFlags
impl Clone for ResetFlags
sourcefn clone(&self) -> ResetFlags
fn clone(&self) -> ResetFlags
Returns a copy of the value. Read more
1.0.0 · sourcefn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
Performs copy-assignment from source
. Read more
sourceimpl Debug for ResetFlags
impl Debug for ResetFlags
sourceimpl Extend<ResetFlags> for ResetFlags
impl Extend<ResetFlags> for ResetFlags
sourcefn extend<T: IntoIterator<Item = Self>>(&mut self, iterator: T)
fn extend<T: IntoIterator<Item = Self>>(&mut self, iterator: T)
Extends a collection with the contents of an iterator. Read more
sourcefn extend_one(&mut self, item: A)
fn extend_one(&mut self, item: A)
extend_one
)Extends a collection with exactly one element.
sourcefn extend_reserve(&mut self, additional: usize)
fn extend_reserve(&mut self, additional: usize)
extend_one
)Reserves capacity in a collection for the given number of additional elements. Read more
sourceimpl FromIterator<ResetFlags> for ResetFlags
impl FromIterator<ResetFlags> for ResetFlags
sourcefn from_iter<T: IntoIterator<Item = Self>>(iterator: T) -> Self
fn from_iter<T: IntoIterator<Item = Self>>(iterator: T) -> Self
Creates a value from an iterator. Read more
sourceimpl Hash for ResetFlags
impl Hash for ResetFlags
sourceimpl LowerHex for ResetFlags
impl LowerHex for ResetFlags
sourceimpl Not for ResetFlags
impl Not for ResetFlags
type Output = ResetFlags
type Output = ResetFlags
The resulting type after applying the !
operator.
sourceimpl Octal for ResetFlags
impl Octal for ResetFlags
sourceimpl Ord for ResetFlags
impl Ord for ResetFlags
sourceimpl PartialEq<ResetFlags> for ResetFlags
impl PartialEq<ResetFlags> for ResetFlags
sourcefn eq(&self, other: &ResetFlags) -> bool
fn eq(&self, other: &ResetFlags) -> bool
This method tests for self
and other
values to be equal, and is used
by ==
. Read more
sourcefn ne(&self, other: &ResetFlags) -> bool
fn ne(&self, other: &ResetFlags) -> bool
This method tests for !=
.
sourceimpl PartialOrd<ResetFlags> for ResetFlags
impl PartialOrd<ResetFlags> for ResetFlags
sourcefn partial_cmp(&self, other: &ResetFlags) -> Option<Ordering>
fn partial_cmp(&self, other: &ResetFlags) -> Option<Ordering>
This method returns an ordering between self
and other
values if one exists. Read more
1.0.0 · sourcefn lt(&self, other: &Rhs) -> bool
fn lt(&self, other: &Rhs) -> bool
This method tests less than (for self
and other
) and is used by the <
operator. Read more
1.0.0 · sourcefn le(&self, other: &Rhs) -> bool
fn le(&self, other: &Rhs) -> bool
This method tests less than or equal to (for self
and other
) and is used by the <=
operator. Read more
sourceimpl Sub<ResetFlags> for ResetFlags
impl Sub<ResetFlags> for ResetFlags
type Output = ResetFlags
type Output = ResetFlags
The resulting type after applying the -
operator.
sourceimpl SubAssign<ResetFlags> for ResetFlags
impl SubAssign<ResetFlags> for ResetFlags
sourcefn sub_assign(&mut self, other: Self)
fn sub_assign(&mut self, other: Self)
Disables all flags enabled in the set.
sourceimpl UpperHex for ResetFlags
impl UpperHex for ResetFlags
impl Copy for ResetFlags
impl Eq for ResetFlags
impl StructuralEq for ResetFlags
impl StructuralPartialEq for ResetFlags
Auto Trait Implementations
impl RefUnwindSafe for ResetFlags
impl Send for ResetFlags
impl Sync for ResetFlags
impl Unpin for ResetFlags
impl UnwindSafe for ResetFlags
Blanket Implementations
sourceimpl<T> BorrowMut<T> for T where
T: ?Sized,
impl<T> BorrowMut<T> for T where
T: ?Sized,
const: unstable · sourcefn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Mutably borrows from an owned value. Read more