Struct bevy_rapier2d::geometry::ActiveCollisionTypes
source · [−]pub struct ActiveCollisionTypes { /* private fields */ }
Expand description
Flags affecting whether or not collision-detection happens between two colliders depending on the type of rigid-bodies they are attached to.
Implementations
sourceimpl ActiveCollisionTypes
impl ActiveCollisionTypes
sourcepub const DYNAMIC_DYNAMIC: Self = _
pub const DYNAMIC_DYNAMIC: Self = _
Enable collision-detection between a collider attached to a dynamic body and another collider attached to a dynamic body.
sourcepub const DYNAMIC_KINEMATIC: Self = _
pub const DYNAMIC_KINEMATIC: Self = _
Enable collision-detection between a collider attached to a dynamic body and another collider attached to a kinematic body.
sourcepub const DYNAMIC_STATIC: Self = _
pub const DYNAMIC_STATIC: Self = _
Enable collision-detection between a collider attached to a dynamic body and another collider attached to a fixed body (or not attached to any body).
sourcepub const KINEMATIC_KINEMATIC: Self = _
pub const KINEMATIC_KINEMATIC: Self = _
Enable collision-detection between a collider attached to a kinematic body and another collider attached to a kinematic body.
sourcepub const KINEMATIC_STATIC: Self = _
pub const KINEMATIC_STATIC: Self = _
Enable collision-detection between a collider attached to a kinematic body and another collider attached to a fixed body (or not attached to any body).
sourcepub const STATIC_STATIC: Self = _
pub const STATIC_STATIC: Self = _
Enable collision-detection between a collider attached to a fixed body (or not attached to any body) and another collider attached to a fixed body (or not attached to any body).
sourcepub const fn from_bits(bits: u16) -> Option<Self>
pub const fn from_bits(bits: u16) -> Option<Self>
Convert from underlying bit representation, unless that representation contains bits that do not correspond to a flag.
sourcepub const fn from_bits_truncate(bits: u16) -> Self
pub const fn from_bits_truncate(bits: u16) -> Self
Convert from underlying bit representation, dropping any bits that do not correspond to flags.
sourcepub const unsafe fn from_bits_unchecked(bits: u16) -> Self
pub const unsafe fn from_bits_unchecked(bits: u16) -> Self
Convert from underlying bit representation, preserving all bits (even those not corresponding to a defined flag).
Safety
The caller of the bitflags!
macro can chose to allow or
disallow extra bits for their bitflags type.
The caller of from_bits_unchecked()
has to ensure that
all bits correspond to a defined flag or that extra bits
are valid for this bitflags type.
sourcepub const fn intersects(&self, other: Self) -> bool
pub const fn intersects(&self, other: Self) -> bool
Returns true
if there are flags common to both self
and other
.
sourcepub const fn contains(&self, other: Self) -> bool
pub const fn contains(&self, other: Self) -> bool
Returns true
if all of the flags in other
are contained within self
.
sourcepub fn set(&mut self, other: Self, value: bool)
pub fn set(&mut self, other: Self, value: bool)
Inserts or removes the specified flags depending on the passed value.
sourcepub const fn intersection(self, other: Self) -> Self
pub const fn intersection(self, other: Self) -> Self
Returns the intersection between the flags in self
and
other
.
Specifically, the returned set contains only the flags which are
present in both self
and other
.
This is equivalent to using the &
operator (e.g.
ops::BitAnd
), as in flags & other
.
sourcepub const fn union(self, other: Self) -> Self
pub const fn union(self, other: Self) -> Self
Returns the union of between the flags in self
and other
.
Specifically, the returned set contains all flags which are
present in either self
or other
, including any which are
present in both (see Self::symmetric_difference
if that
is undesirable).
This is equivalent to using the |
operator (e.g.
ops::BitOr
), as in flags | other
.
sourcepub const fn difference(self, other: Self) -> Self
pub const fn difference(self, other: Self) -> Self
Returns the difference between the flags in self
and other
.
Specifically, the returned set contains all flags present in
self
, except for the ones present in other
.
It is also conceptually equivalent to the “bit-clear” operation:
flags & !other
(and this syntax is also supported).
This is equivalent to using the -
operator (e.g.
ops::Sub
), as in flags - other
.
sourcepub const fn symmetric_difference(self, other: Self) -> Self
pub const fn symmetric_difference(self, other: Self) -> Self
Returns the symmetric difference between the flags
in self
and other
.
Specifically, the returned set contains the flags present which
are present in self
or other
, but that are not present in
both. Equivalently, it contains the flags present in exactly
one of the sets self
and other
.
This is equivalent to using the ^
operator (e.g.
ops::BitXor
), as in flags ^ other
.
sourcepub const fn complement(self) -> Self
pub const fn complement(self) -> Self
Returns the complement of this set of flags.
Specifically, the returned set contains all the flags which are
not set in self
, but which are allowed for this type.
Alternatively, it can be thought of as the set difference
between Self::all()
and self
(e.g. Self::all() - self
)
This is equivalent to using the !
operator (e.g.
ops::Not
), as in !flags
.
Trait Implementations
sourceimpl Binary for ActiveCollisionTypes
impl Binary for ActiveCollisionTypes
sourceimpl BitAnd<ActiveCollisionTypes> for ActiveCollisionTypes
impl BitAnd<ActiveCollisionTypes> for ActiveCollisionTypes
type Output = ActiveCollisionTypes
type Output = ActiveCollisionTypes
The resulting type after applying the &
operator.
sourceimpl BitAndAssign<ActiveCollisionTypes> for ActiveCollisionTypes
impl BitAndAssign<ActiveCollisionTypes> for ActiveCollisionTypes
sourcefn bitand_assign(&mut self, other: Self)
fn bitand_assign(&mut self, other: Self)
Disables all flags disabled in the set.
sourceimpl BitOr<ActiveCollisionTypes> for ActiveCollisionTypes
impl BitOr<ActiveCollisionTypes> for ActiveCollisionTypes
sourcefn bitor(self, other: ActiveCollisionTypes) -> Self
fn bitor(self, other: ActiveCollisionTypes) -> Self
Returns the union of the two sets of flags.
type Output = ActiveCollisionTypes
type Output = ActiveCollisionTypes
The resulting type after applying the |
operator.
sourceimpl BitOrAssign<ActiveCollisionTypes> for ActiveCollisionTypes
impl BitOrAssign<ActiveCollisionTypes> for ActiveCollisionTypes
sourcefn bitor_assign(&mut self, other: Self)
fn bitor_assign(&mut self, other: Self)
Adds the set of flags.
sourceimpl BitXor<ActiveCollisionTypes> for ActiveCollisionTypes
impl BitXor<ActiveCollisionTypes> for ActiveCollisionTypes
sourcefn bitxor(self, other: Self) -> Self
fn bitxor(self, other: Self) -> Self
Returns the left flags, but with all the right flags toggled.
type Output = ActiveCollisionTypes
type Output = ActiveCollisionTypes
The resulting type after applying the ^
operator.
sourceimpl BitXorAssign<ActiveCollisionTypes> for ActiveCollisionTypes
impl BitXorAssign<ActiveCollisionTypes> for ActiveCollisionTypes
sourcefn bitxor_assign(&mut self, other: Self)
fn bitxor_assign(&mut self, other: Self)
Toggles the set of flags.
sourceimpl Clone for ActiveCollisionTypes
impl Clone for ActiveCollisionTypes
sourcefn clone(&self) -> ActiveCollisionTypes
fn clone(&self) -> ActiveCollisionTypes
Returns a copy of the value. Read more
1.0.0 · sourcefn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
Performs copy-assignment from source
. Read more
sourceimpl Component for ActiveCollisionTypes where
Self: Send + Sync + 'static,
impl Component for ActiveCollisionTypes where
Self: Send + Sync + 'static,
type Storage = TableStorage
sourceimpl Debug for ActiveCollisionTypes
impl Debug for ActiveCollisionTypes
sourceimpl Default for ActiveCollisionTypes
impl Default for ActiveCollisionTypes
sourceimpl<'de> Deserialize<'de> for ActiveCollisionTypes
impl<'de> Deserialize<'de> for ActiveCollisionTypes
sourcefn deserialize<__D>(__deserializer: __D) -> Result<Self, __D::Error> where
__D: Deserializer<'de>,
fn deserialize<__D>(__deserializer: __D) -> Result<Self, __D::Error> where
__D: Deserializer<'de>,
Deserialize this value from the given Serde deserializer. Read more
sourceimpl Extend<ActiveCollisionTypes> for ActiveCollisionTypes
impl Extend<ActiveCollisionTypes> for ActiveCollisionTypes
sourcefn extend<T: IntoIterator<Item = Self>>(&mut self, iterator: T)
fn extend<T: IntoIterator<Item = Self>>(&mut self, iterator: T)
Extends a collection with the contents of an iterator. Read more
sourcefn extend_one(&mut self, item: A)
fn extend_one(&mut self, item: A)
extend_one
)Extends a collection with exactly one element.
sourcefn extend_reserve(&mut self, additional: usize)
fn extend_reserve(&mut self, additional: usize)
extend_one
)Reserves capacity in a collection for the given number of additional elements. Read more
sourceimpl From<ActiveCollisionTypes> for ActiveCollisionTypes
impl From<ActiveCollisionTypes> for ActiveCollisionTypes
sourcefn from(collision_types: ActiveCollisionTypes) -> ActiveCollisionTypes
fn from(collision_types: ActiveCollisionTypes) -> ActiveCollisionTypes
Converts to this type from the input type.
sourceimpl FromIterator<ActiveCollisionTypes> for ActiveCollisionTypes
impl FromIterator<ActiveCollisionTypes> for ActiveCollisionTypes
sourcefn from_iter<T: IntoIterator<Item = Self>>(iterator: T) -> Self
fn from_iter<T: IntoIterator<Item = Self>>(iterator: T) -> Self
Creates a value from an iterator. Read more
sourceimpl FromReflect for ActiveCollisionTypes where
u16: FromReflect,
impl FromReflect for ActiveCollisionTypes where
u16: FromReflect,
sourcefn from_reflect(reflect: &dyn Reflect) -> Option<Self>
fn from_reflect(reflect: &dyn Reflect) -> Option<Self>
Constructs a concrete instance of Self
from a reflected value.
sourceimpl GetTypeRegistration for ActiveCollisionTypes
impl GetTypeRegistration for ActiveCollisionTypes
fn get_type_registration() -> TypeRegistration
sourceimpl Hash for ActiveCollisionTypes
impl Hash for ActiveCollisionTypes
sourceimpl LowerHex for ActiveCollisionTypes
impl LowerHex for ActiveCollisionTypes
sourceimpl Not for ActiveCollisionTypes
impl Not for ActiveCollisionTypes
type Output = ActiveCollisionTypes
type Output = ActiveCollisionTypes
The resulting type after applying the !
operator.
sourceimpl Octal for ActiveCollisionTypes
impl Octal for ActiveCollisionTypes
sourceimpl Ord for ActiveCollisionTypes
impl Ord for ActiveCollisionTypes
sourcefn cmp(&self, other: &ActiveCollisionTypes) -> Ordering
fn cmp(&self, other: &ActiveCollisionTypes) -> Ordering
1.21.0 · sourcefn max(self, other: Self) -> Self
fn max(self, other: Self) -> Self
Compares and returns the maximum of two values. Read more
1.21.0 · sourcefn min(self, other: Self) -> Self
fn min(self, other: Self) -> Self
Compares and returns the minimum of two values. Read more
1.50.0 · sourcefn clamp(self, min: Self, max: Self) -> Self where
Self: PartialOrd<Self>,
fn clamp(self, min: Self, max: Self) -> Self where
Self: PartialOrd<Self>,
Restrict a value to a certain interval. Read more
sourceimpl PartialEq<ActiveCollisionTypes> for ActiveCollisionTypes
impl PartialEq<ActiveCollisionTypes> for ActiveCollisionTypes
sourcefn eq(&self, other: &ActiveCollisionTypes) -> bool
fn eq(&self, other: &ActiveCollisionTypes) -> bool
This method tests for self
and other
values to be equal, and is used
by ==
. Read more
sourcefn ne(&self, other: &ActiveCollisionTypes) -> bool
fn ne(&self, other: &ActiveCollisionTypes) -> bool
This method tests for !=
.
sourceimpl PartialOrd<ActiveCollisionTypes> for ActiveCollisionTypes
impl PartialOrd<ActiveCollisionTypes> for ActiveCollisionTypes
sourcefn partial_cmp(&self, other: &ActiveCollisionTypes) -> Option<Ordering>
fn partial_cmp(&self, other: &ActiveCollisionTypes) -> Option<Ordering>
This method returns an ordering between self
and other
values if one exists. Read more
1.0.0 · sourcefn lt(&self, other: &Rhs) -> bool
fn lt(&self, other: &Rhs) -> bool
This method tests less than (for self
and other
) and is used by the <
operator. Read more
1.0.0 · sourcefn le(&self, other: &Rhs) -> bool
fn le(&self, other: &Rhs) -> bool
This method tests less than or equal to (for self
and other
) and is used by the <=
operator. Read more
sourceimpl Reflect for ActiveCollisionTypes
impl Reflect for ActiveCollisionTypes
sourcefn get_type_info(&self) -> &'static TypeInfo
fn get_type_info(&self) -> &'static TypeInfo
Returns the [TypeInfo
] of the underlying type. Read more
sourcefn as_any_mut(&mut self) -> &mut dyn Any
fn as_any_mut(&mut self) -> &mut dyn Any
Returns the value as a &mut dyn Any
.
sourcefn as_reflect(&self) -> &dyn Reflect
fn as_reflect(&self) -> &dyn Reflect
Casts this type to a reflected value
sourcefn as_reflect_mut(&mut self) -> &mut dyn Reflect
fn as_reflect_mut(&mut self) -> &mut dyn Reflect
Casts this type to a mutable reflected value
sourcefn clone_value(&self) -> Box<dyn Reflect>
fn clone_value(&self) -> Box<dyn Reflect>
Clones the value as a Reflect
trait object. Read more
sourcefn set(&mut self, value: Box<dyn Reflect>) -> Result<(), Box<dyn Reflect>>
fn set(&mut self, value: Box<dyn Reflect>) -> Result<(), Box<dyn Reflect>>
Performs a type-checked assignment of a reflected value to this value. Read more
sourcefn reflect_ref(&self) -> ReflectRef<'_>
fn reflect_ref(&self) -> ReflectRef<'_>
Returns an enumeration of “kinds” of type. Read more
sourcefn reflect_mut(&mut self) -> ReflectMut<'_>
fn reflect_mut(&mut self) -> ReflectMut<'_>
Returns a mutable enumeration of “kinds” of type. Read more
sourcefn reflect_hash(&self) -> Option<u64>
fn reflect_hash(&self) -> Option<u64>
Returns a hash of the value (which includes the type). Read more
sourcefn reflect_partial_eq(&self, value: &dyn Reflect) -> Option<bool>
fn reflect_partial_eq(&self, value: &dyn Reflect) -> Option<bool>
Returns a “partial equality” comparison result. Read more
fn serializable(&self) -> Option<Serializable<'_>>
fn serializable(&self) -> Option<Serializable<'_>>
Returns a serializable version of the value. Read more
sourceimpl Serialize for ActiveCollisionTypes
impl Serialize for ActiveCollisionTypes
sourceimpl Struct for ActiveCollisionTypes
impl Struct for ActiveCollisionTypes
sourcefn field(&self, name: &str) -> Option<&dyn Reflect>
fn field(&self, name: &str) -> Option<&dyn Reflect>
Returns a reference to the value of the field named name
as a &dyn Reflect
. Read more
sourcefn field_mut(&mut self, name: &str) -> Option<&mut dyn Reflect>
fn field_mut(&mut self, name: &str) -> Option<&mut dyn Reflect>
Returns a mutable reference to the value of the field named name
as a
&mut dyn Reflect
. Read more
sourcefn field_at(&self, index: usize) -> Option<&dyn Reflect>
fn field_at(&self, index: usize) -> Option<&dyn Reflect>
Returns a reference to the value of the field with index index
as a
&dyn Reflect
. Read more
sourcefn field_at_mut(&mut self, index: usize) -> Option<&mut dyn Reflect>
fn field_at_mut(&mut self, index: usize) -> Option<&mut dyn Reflect>
Returns a mutable reference to the value of the field with index index
as a &mut dyn Reflect
. Read more
sourcefn name_at(&self, index: usize) -> Option<&str>
fn name_at(&self, index: usize) -> Option<&str>
Returns the name of the field with index index
.
sourcefn iter_fields(&self) -> FieldIter<'_>
fn iter_fields(&self) -> FieldIter<'_>
Returns an iterator over the values of the struct’s fields.
sourcefn clone_dynamic(&self) -> DynamicStruct
fn clone_dynamic(&self) -> DynamicStruct
Clones the struct into a [DynamicStruct
].
sourceimpl Sub<ActiveCollisionTypes> for ActiveCollisionTypes
impl Sub<ActiveCollisionTypes> for ActiveCollisionTypes
type Output = ActiveCollisionTypes
type Output = ActiveCollisionTypes
The resulting type after applying the -
operator.
sourceimpl SubAssign<ActiveCollisionTypes> for ActiveCollisionTypes
impl SubAssign<ActiveCollisionTypes> for ActiveCollisionTypes
sourcefn sub_assign(&mut self, other: Self)
fn sub_assign(&mut self, other: Self)
Disables all flags enabled in the set.
sourceimpl Typed for ActiveCollisionTypes
impl Typed for ActiveCollisionTypes
sourceimpl UpperHex for ActiveCollisionTypes
impl UpperHex for ActiveCollisionTypes
impl Copy for ActiveCollisionTypes
impl Eq for ActiveCollisionTypes
impl StructuralEq for ActiveCollisionTypes
impl StructuralPartialEq for ActiveCollisionTypes
Auto Trait Implementations
impl RefUnwindSafe for ActiveCollisionTypes
impl Send for ActiveCollisionTypes
impl Sync for ActiveCollisionTypes
impl Unpin for ActiveCollisionTypes
impl UnwindSafe for ActiveCollisionTypes
Blanket Implementations
impl<T, U> AsBindGroupShaderType<U> for T where
U: ShaderType,
&'a T: for<'a> Into<U>,
impl<T, U> AsBindGroupShaderType<U> for T where
U: ShaderType,
&'a T: for<'a> Into<U>,
fn as_bind_group_shader_type(
&self,
_images: &HashMap<Handle<Image>, <Image as RenderAsset>::PreparedAsset, RandomState, Global>
) -> U
fn as_bind_group_shader_type(
&self,
_images: &HashMap<Handle<Image>, <Image as RenderAsset>::PreparedAsset, RandomState, Global>
) -> U
Return the T
[ShaderType
] for self
. When used in [AsBindGroup
]
derives, it is safe to assume that all images in self
exist. Read more
sourceimpl<T> BorrowMut<T> for T where
T: ?Sized,
impl<T> BorrowMut<T> for T where
T: ?Sized,
const: unstable · sourcefn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Mutably borrows from an owned value. Read more
impl<T> Downcast for T where
T: Any,
impl<T> Downcast for T where
T: Any,
fn into_any(self: Box<T, Global>) -> Box<dyn Any + 'static, Global>
fn into_any(self: Box<T, Global>) -> Box<dyn Any + 'static, Global>
Convert Box<dyn Trait>
(where Trait: Downcast
) to Box<dyn Any>
. Box<dyn Any>
can
then be further downcast
into Box<ConcreteType>
where ConcreteType
implements Trait
. Read more
fn into_any_rc(self: Rc<T>) -> Rc<dyn Any + 'static>
fn into_any_rc(self: Rc<T>) -> Rc<dyn Any + 'static>
Convert Rc<Trait>
(where Trait: Downcast
) to Rc<Any>
. Rc<Any>
can then be
further downcast
into Rc<ConcreteType>
where ConcreteType
implements Trait
. Read more
fn as_any(&self) -> &(dyn Any + 'static)
fn as_any(&self) -> &(dyn Any + 'static)
Convert &Trait
(where Trait: Downcast
) to &Any
. This is needed since Rust cannot
generate &Any
’s vtable from &Trait
’s. Read more
fn as_any_mut(&mut self) -> &mut (dyn Any + 'static)
fn as_any_mut(&mut self) -> &mut (dyn Any + 'static)
Convert &mut Trait
(where Trait: Downcast
) to &Any
. This is needed since Rust cannot
generate &mut Any
’s vtable from &mut Trait
’s. Read more
impl<T> DynHash for T where
T: DynEq + Hash,
impl<T> DynHash for T where
T: DynEq + Hash,
sourceimpl<Q, K> Equivalent<K> for Q where
Q: Eq + ?Sized,
K: Borrow<Q> + ?Sized,
impl<Q, K> Equivalent<K> for Q where
Q: Eq + ?Sized,
K: Borrow<Q> + ?Sized,
sourcefn equivalent(&self, key: &K) -> bool
fn equivalent(&self, key: &K) -> bool
Compare self to key
and return true
if they are equal.
impl<T> FromWorld for T where
T: Default,
impl<T> FromWorld for T where
T: Default,
fn from_world(_world: &mut World) -> T
fn from_world(_world: &mut World) -> T
Creates Self
using data from the given [World]
impl<S> GetField for S where
S: Struct,
impl<S> GetField for S where
S: Struct,
fn get_field<T>(&self, name: &str) -> Option<&T> where
T: Reflect,
fn get_field<T>(&self, name: &str) -> Option<&T> where
T: Reflect,
Returns a reference to the value of the field named name
, downcast to
T
. Read more
fn get_field_mut<T>(&mut self, name: &str) -> Option<&mut T> where
T: Reflect,
fn get_field_mut<T>(&mut self, name: &str) -> Option<&mut T> where
T: Reflect,
Returns a mutable reference to the value of the field named name
,
downcast to T
. Read more
impl<T> GetPath for T where
T: Reflect,
impl<T> GetPath for T where
T: Reflect,
fn path(
&'r self,
path: &'p str
) -> Result<&'r (dyn Reflect + 'static), ReflectPathError<'p>>
fn path(
&'r self,
path: &'p str
) -> Result<&'r (dyn Reflect + 'static), ReflectPathError<'p>>
Returns a reference to the value specified by path
. Read more
fn path_mut(
&'r mut self,
path: &'p str
) -> Result<&'r mut (dyn Reflect + 'static), ReflectPathError<'p>>
fn path_mut(
&'r mut self,
path: &'p str
) -> Result<&'r mut (dyn Reflect + 'static), ReflectPathError<'p>>
Returns a mutable reference to the value specified by path
. Read more
fn get_path<T>(&'r self, path: &'p str) -> Result<&'r T, ReflectPathError<'p>> where
T: Reflect,
fn get_path<T>(&'r self, path: &'p str) -> Result<&'r T, ReflectPathError<'p>> where
T: Reflect,
Returns a statically typed reference to the value specified by path
.
fn get_path_mut<T>(
&'r mut self,
path: &'p str
) -> Result<&'r mut T, ReflectPathError<'p>> where
T: Reflect,
fn get_path_mut<T>(
&'r mut self,
path: &'p str
) -> Result<&'r mut T, ReflectPathError<'p>> where
T: Reflect,
Returns a statically typed mutable reference to the value specified by
path
. Read more
sourceimpl<T> Instrument for T
impl<T> Instrument for T
sourcefn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
sourcefn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
impl<T> Pointable for T
impl<T> Pointable for T
sourceimpl<T> Serialize for T where
T: Serialize + ?Sized,
impl<T> Serialize for T where
T: Serialize + ?Sized,
fn erased_serialize(&self, serializer: &mut dyn Serializer) -> Result<Ok, Error>
impl<SS, SP> SupersetOf<SS> for SP where
SS: SubsetOf<SP>,
impl<SS, SP> SupersetOf<SS> for SP where
SS: SubsetOf<SP>,
fn to_subset(&self) -> Option<SS>
fn to_subset(&self) -> Option<SS>
The inverse inclusion map: attempts to construct self
from the equivalent element of its
superset. Read more
fn is_in_subset(&self) -> bool
fn is_in_subset(&self) -> bool
Checks if self
is actually part of its subset T
(and can be converted to it).
fn to_subset_unchecked(&self) -> SS
fn to_subset_unchecked(&self) -> SS
Use with care! Same as self.to_subset
but without any property checks. Always succeeds.
fn from_subset(element: &SS) -> SP
fn from_subset(element: &SS) -> SP
The inclusion map: converts self
to the equivalent element of its superset.
impl<T> TypeData for T where
T: 'static + Send + Sync + Clone,
impl<T> TypeData for T where
T: 'static + Send + Sync + Clone,
fn clone_type_data(&self) -> Box<dyn TypeData + 'static, Global>
sourceimpl<T> WithSubscriber for T
impl<T> WithSubscriber for T
sourcefn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self> where
S: Into<Dispatch>,
fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self> where
S: Into<Dispatch>,
Attaches the provided Subscriber
to this type, returning a
WithDispatch
wrapper. Read more
sourcefn with_current_subscriber(self) -> WithDispatch<Self>
fn with_current_subscriber(self) -> WithDispatch<Self>
Attaches the current default Subscriber
to this type, returning a
WithDispatch
wrapper. Read more