Struct aws_sdk_wafv2::operation::update_rule_group::builders::UpdateRuleGroupFluentBuilder

pub struct UpdateRuleGroupFluentBuilder { /* private fields */ }

Fluent builder constructing a request to UpdateRuleGroup.

Updates the specified RuleGroup.

This operation completely replaces the mutable specifications that you already have for the rule group with the ones that you provide to this call.

To modify a rule group, do the following:

1. Retrieve it by calling GetRuleGroup

2. Update its settings as needed

3. Provide the complete rule group specification to this call

A rule group defines a collection of rules to inspect and control web requests that you can use in a WebACL. When you create a rule group, you define an immutable capacity limit. If you update a rule group, you must stay within the capacity. This allows others to reuse the rule group with confidence in its capacity requirements.

Temporary inconsistencies during updates

When you create or change a web ACL or other WAF resources, the changes take a small amount of time to propagate to all areas where the resources are stored. The propagation time can be from a few seconds to a number of minutes.

The following are examples of the temporary inconsistencies that you might notice during change propagation:

• After you create a web ACL, if you try to associate it with a resource, you might get an exception indicating that the web ACL is unavailable.

• After you add a rule group to a web ACL, the new rule group rules might be in effect in one area where the web ACL is used and not in another.

• After you change a rule action setting, you might see the old action in some places and the new action in others.

• After you add an IP address to an IP set that is in use in a blocking rule, the new address might be blocked in one area while still allowed in another.

Implementations

impl UpdateRuleGroupFluentBuilder

pub fn as_input(&self) -> &UpdateRuleGroupInputBuilder

Access the UpdateRuleGroup as a reference.

pub async fn send( self ) -> Result<UpdateRuleGroupOutput, SdkError<UpdateRuleGroupError, HttpResponse>>

Sends the request and returns the response.

If an error occurs, an SdkError will be returned with additional details that can be matched against.

By default, any retryable failures will be retried twice. Retry behavior is configurable with the RetryConfig, which can be set when configuring the client.

pub fn customize( self ) -> CustomizableOperation<UpdateRuleGroupOutput, UpdateRuleGroupError, Self>

Consumes this builder, creating a customizable operation that can be modified before being sent.

pub fn name(self, input: impl Into<String>) -> Self

The name of the rule group. You cannot change the name of a rule group after you create it.

pub fn set_name(self, input: Option<String>) -> Self

The name of the rule group. You cannot change the name of a rule group after you create it.

pub fn get_name(&self) -> &Option<String>

The name of the rule group. You cannot change the name of a rule group after you create it.

pub fn scope(self, input: Scope) -> Self

Specifies whether this is for an Amazon CloudFront distribution or for a regional application. A regional application can be an Application Load Balancer (ALB), an Amazon API Gateway REST API, an AppSync GraphQL API, an Amazon Cognito user pool, an App Runner service, or an Amazon Web Services Verified Access instance.

To work with CloudFront, you must also specify the Region US East (N. Virginia) as follows:

• CLI - Specify the Region when you use the CloudFront scope: --scope=CLOUDFRONT --region=us-east-1.

• API and SDKs - For all calls, use the Region endpoint us-east-1.

pub fn set_scope(self, input: Option<Scope>) -> Self

Specifies whether this is for an Amazon CloudFront distribution or for a regional application. A regional application can be an Application Load Balancer (ALB), an Amazon API Gateway REST API, an AppSync GraphQL API, an Amazon Cognito user pool, an App Runner service, or an Amazon Web Services Verified Access instance.

To work with CloudFront, you must also specify the Region US East (N. Virginia) as follows:

• CLI - Specify the Region when you use the CloudFront scope: --scope=CLOUDFRONT --region=us-east-1.

• API and SDKs - For all calls, use the Region endpoint us-east-1.

pub fn get_scope(&self) -> &Option<Scope>

Specifies whether this is for an Amazon CloudFront distribution or for a regional application. A regional application can be an Application Load Balancer (ALB), an Amazon API Gateway REST API, an AppSync GraphQL API, an Amazon Cognito user pool, an App Runner service, or an Amazon Web Services Verified Access instance.

To work with CloudFront, you must also specify the Region US East (N. Virginia) as follows:

• CLI - Specify the Region when you use the CloudFront scope: --scope=CLOUDFRONT --region=us-east-1.

• API and SDKs - For all calls, use the Region endpoint us-east-1.

pub fn id(self, input: impl Into<String>) -> Self

A unique identifier for the rule group. This ID is returned in the responses to create and list commands. You provide it to operations like update and delete.

pub fn set_id(self, input: Option<String>) -> Self

A unique identifier for the rule group. This ID is returned in the responses to create and list commands. You provide it to operations like update and delete.

pub fn get_id(&self) -> &Option<String>

A unique identifier for the rule group. This ID is returned in the responses to create and list commands. You provide it to operations like update and delete.

pub fn description(self, input: impl Into<String>) -> Self

A description of the rule group that helps with identification.

pub fn set_description(self, input: Option<String>) -> Self

A description of the rule group that helps with identification.

pub fn get_description(&self) -> &Option<String>

A description of the rule group that helps with identification.

pub fn rules(self, input: Rule) -> Self

Appends an item to Rules.

To override the contents of this collection use set_rules.

The Rule statements used to identify the web requests that you want to manage. Each rule includes one top-level statement that WAF uses to identify matching web requests, and parameters that govern how WAF handles them.

pub fn set_rules(self, input: Option<Vec<Rule>>) -> Self

The Rule statements used to identify the web requests that you want to manage. Each rule includes one top-level statement that WAF uses to identify matching web requests, and parameters that govern how WAF handles them.

pub fn get_rules(&self) -> &Option<Vec<Rule>>

The Rule statements used to identify the web requests that you want to manage. Each rule includes one top-level statement that WAF uses to identify matching web requests, and parameters that govern how WAF handles them.

pub fn visibility_config(self, input: VisibilityConfig) -> Self

Defines and enables Amazon CloudWatch metrics and web request sample collection.

pub fn set_visibility_config(self, input: Option<VisibilityConfig>) -> Self

Defines and enables Amazon CloudWatch metrics and web request sample collection.

pub fn get_visibility_config(&self) -> &Option<VisibilityConfig>

Defines and enables Amazon CloudWatch metrics and web request sample collection.

pub fn lock_token(self, input: impl Into<String>) -> Self

A token used for optimistic locking. WAF returns a token to your get and list requests, to mark the state of the entity at the time of the request. To make changes to the entity associated with the token, you provide the token to operations like update and delete. WAF uses the token to ensure that no changes have been made to the entity since you last retrieved it. If a change has been made, the update fails with a WAFOptimisticLockException. If this happens, perform another get, and use the new token returned by that operation.

pub fn set_lock_token(self, input: Option<String>) -> Self

A token used for optimistic locking. WAF returns a token to your get and list requests, to mark the state of the entity at the time of the request. To make changes to the entity associated with the token, you provide the token to operations like update and delete. WAF uses the token to ensure that no changes have been made to the entity since you last retrieved it. If a change has been made, the update fails with a WAFOptimisticLockException. If this happens, perform another get, and use the new token returned by that operation.

pub fn get_lock_token(&self) -> &Option<String>

A token used for optimistic locking. WAF returns a token to your get and list requests, to mark the state of the entity at the time of the request. To make changes to the entity associated with the token, you provide the token to operations like update and delete. WAF uses the token to ensure that no changes have been made to the entity since you last retrieved it. If a change has been made, the update fails with a WAFOptimisticLockException. If this happens, perform another get, and use the new token returned by that operation.

pub fn custom_response_bodies( self, k: impl Into<String>, v: CustomResponseBody ) -> Self

Adds a key-value pair to CustomResponseBodies.

To override the contents of this collection use set_custom_response_bodies.

A map of custom response keys and content bodies. When you create a rule with a block action, you can send a custom response to the web request. You define these for the rule group, and then use them in the rules that you define in the rule group.

For information about customizing web requests and responses, see Customizing web requests and responses in WAF in the WAF Developer Guide.

For information about the limits on count and size for custom request and response settings, see WAF quotas in the WAF Developer Guide.

pub fn set_custom_response_bodies( self, input: Option<HashMap<String, CustomResponseBody>> ) -> Self

A map of custom response keys and content bodies. When you create a rule with a block action, you can send a custom response to the web request. You define these for the rule group, and then use them in the rules that you define in the rule group.

For information about customizing web requests and responses, see Customizing web requests and responses in WAF in the WAF Developer Guide.

For information about the limits on count and size for custom request and response settings, see WAF quotas in the WAF Developer Guide.

pub fn get_custom_response_bodies( &self ) -> &Option<HashMap<String, CustomResponseBody>>

A map of custom response keys and content bodies. When you create a rule with a block action, you can send a custom response to the web request. You define these for the rule group, and then use them in the rules that you define in the rule group.

For information about customizing web requests and responses, see Customizing web requests and responses in WAF in the WAF Developer Guide.

For information about the limits on count and size for custom request and response settings, see WAF quotas in the WAF Developer Guide.

Trait Implementations

impl Clone for UpdateRuleGroupFluentBuilder

fn clone(&self) -> UpdateRuleGroupFluentBuilder

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for UpdateRuleGroupFluentBuilder

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.