Struct aws_sdk_wafv2::operation::update_regex_pattern_set::builders::UpdateRegexPatternSetFluentBuilder
source · pub struct UpdateRegexPatternSetFluentBuilder { /* private fields */ }
Expand description
Fluent builder constructing a request to UpdateRegexPatternSet
.
Updates the specified RegexPatternSet
.
This operation completely replaces the mutable specifications that you already have for the regex pattern set with the ones that you provide to this call.
To modify a regex pattern set, do the following:
-
Retrieve it by calling
GetRegexPatternSet
-
Update its settings as needed
-
Provide the complete regex pattern set specification to this call
Temporary inconsistencies during updates
When you create or change a web ACL or other WAF resources, the changes take a small amount of time to propagate to all areas where the resources are stored. The propagation time can be from a few seconds to a number of minutes.
The following are examples of the temporary inconsistencies that you might notice during change propagation:
-
After you create a web ACL, if you try to associate it with a resource, you might get an exception indicating that the web ACL is unavailable.
-
After you add a rule group to a web ACL, the new rule group rules might be in effect in one area where the web ACL is used and not in another.
-
After you change a rule action setting, you might see the old action in some places and the new action in others.
-
After you add an IP address to an IP set that is in use in a blocking rule, the new address might be blocked in one area while still allowed in another.
Implementations§
source§impl UpdateRegexPatternSetFluentBuilder
impl UpdateRegexPatternSetFluentBuilder
sourcepub fn as_input(&self) -> &UpdateRegexPatternSetInputBuilder
pub fn as_input(&self) -> &UpdateRegexPatternSetInputBuilder
Access the UpdateRegexPatternSet as a reference.
sourcepub async fn send(
self
) -> Result<UpdateRegexPatternSetOutput, SdkError<UpdateRegexPatternSetError, HttpResponse>>
pub async fn send( self ) -> Result<UpdateRegexPatternSetOutput, SdkError<UpdateRegexPatternSetError, HttpResponse>>
Sends the request and returns the response.
If an error occurs, an SdkError
will be returned with additional details that
can be matched against.
By default, any retryable failures will be retried twice. Retry behavior is configurable with the RetryConfig, which can be set when configuring the client.
sourcepub fn customize(
self
) -> CustomizableOperation<UpdateRegexPatternSetOutput, UpdateRegexPatternSetError, Self>
pub fn customize( self ) -> CustomizableOperation<UpdateRegexPatternSetOutput, UpdateRegexPatternSetError, Self>
Consumes this builder, creating a customizable operation that can be modified before being sent.
sourcepub fn name(self, input: impl Into<String>) -> Self
pub fn name(self, input: impl Into<String>) -> Self
The name of the set. You cannot change the name after you create the set.
sourcepub fn set_name(self, input: Option<String>) -> Self
pub fn set_name(self, input: Option<String>) -> Self
The name of the set. You cannot change the name after you create the set.
sourcepub fn get_name(&self) -> &Option<String>
pub fn get_name(&self) -> &Option<String>
The name of the set. You cannot change the name after you create the set.
sourcepub fn scope(self, input: Scope) -> Self
pub fn scope(self, input: Scope) -> Self
Specifies whether this is for an Amazon CloudFront distribution or for a regional application. A regional application can be an Application Load Balancer (ALB), an Amazon API Gateway REST API, an AppSync GraphQL API, an Amazon Cognito user pool, an App Runner service, or an Amazon Web Services Verified Access instance.
To work with CloudFront, you must also specify the Region US East (N. Virginia) as follows:
-
CLI - Specify the Region when you use the CloudFront scope:
--scope=CLOUDFRONT --region=us-east-1
. -
API and SDKs - For all calls, use the Region endpoint us-east-1.
sourcepub fn set_scope(self, input: Option<Scope>) -> Self
pub fn set_scope(self, input: Option<Scope>) -> Self
Specifies whether this is for an Amazon CloudFront distribution or for a regional application. A regional application can be an Application Load Balancer (ALB), an Amazon API Gateway REST API, an AppSync GraphQL API, an Amazon Cognito user pool, an App Runner service, or an Amazon Web Services Verified Access instance.
To work with CloudFront, you must also specify the Region US East (N. Virginia) as follows:
-
CLI - Specify the Region when you use the CloudFront scope:
--scope=CLOUDFRONT --region=us-east-1
. -
API and SDKs - For all calls, use the Region endpoint us-east-1.
sourcepub fn get_scope(&self) -> &Option<Scope>
pub fn get_scope(&self) -> &Option<Scope>
Specifies whether this is for an Amazon CloudFront distribution or for a regional application. A regional application can be an Application Load Balancer (ALB), an Amazon API Gateway REST API, an AppSync GraphQL API, an Amazon Cognito user pool, an App Runner service, or an Amazon Web Services Verified Access instance.
To work with CloudFront, you must also specify the Region US East (N. Virginia) as follows:
-
CLI - Specify the Region when you use the CloudFront scope:
--scope=CLOUDFRONT --region=us-east-1
. -
API and SDKs - For all calls, use the Region endpoint us-east-1.
sourcepub fn id(self, input: impl Into<String>) -> Self
pub fn id(self, input: impl Into<String>) -> Self
A unique identifier for the set. This ID is returned in the responses to create and list commands. You provide it to operations like update and delete.
sourcepub fn set_id(self, input: Option<String>) -> Self
pub fn set_id(self, input: Option<String>) -> Self
A unique identifier for the set. This ID is returned in the responses to create and list commands. You provide it to operations like update and delete.
sourcepub fn get_id(&self) -> &Option<String>
pub fn get_id(&self) -> &Option<String>
A unique identifier for the set. This ID is returned in the responses to create and list commands. You provide it to operations like update and delete.
sourcepub fn description(self, input: impl Into<String>) -> Self
pub fn description(self, input: impl Into<String>) -> Self
A description of the set that helps with identification.
sourcepub fn set_description(self, input: Option<String>) -> Self
pub fn set_description(self, input: Option<String>) -> Self
A description of the set that helps with identification.
sourcepub fn get_description(&self) -> &Option<String>
pub fn get_description(&self) -> &Option<String>
A description of the set that helps with identification.
sourcepub fn regular_expression_list(self, input: Regex) -> Self
pub fn regular_expression_list(self, input: Regex) -> Self
Appends an item to RegularExpressionList
.
To override the contents of this collection use set_regular_expression_list
.
sourcepub fn set_regular_expression_list(self, input: Option<Vec<Regex>>) -> Self
pub fn set_regular_expression_list(self, input: Option<Vec<Regex>>) -> Self
sourcepub fn get_regular_expression_list(&self) -> &Option<Vec<Regex>>
pub fn get_regular_expression_list(&self) -> &Option<Vec<Regex>>
sourcepub fn lock_token(self, input: impl Into<String>) -> Self
pub fn lock_token(self, input: impl Into<String>) -> Self
A token used for optimistic locking. WAF returns a token to your get
and list
requests, to mark the state of the entity at the time of the request. To make changes to the entity associated with the token, you provide the token to operations like update
and delete
. WAF uses the token to ensure that no changes have been made to the entity since you last retrieved it. If a change has been made, the update fails with a WAFOptimisticLockException
. If this happens, perform another get
, and use the new token returned by that operation.
sourcepub fn set_lock_token(self, input: Option<String>) -> Self
pub fn set_lock_token(self, input: Option<String>) -> Self
A token used for optimistic locking. WAF returns a token to your get
and list
requests, to mark the state of the entity at the time of the request. To make changes to the entity associated with the token, you provide the token to operations like update
and delete
. WAF uses the token to ensure that no changes have been made to the entity since you last retrieved it. If a change has been made, the update fails with a WAFOptimisticLockException
. If this happens, perform another get
, and use the new token returned by that operation.
sourcepub fn get_lock_token(&self) -> &Option<String>
pub fn get_lock_token(&self) -> &Option<String>
A token used for optimistic locking. WAF returns a token to your get
and list
requests, to mark the state of the entity at the time of the request. To make changes to the entity associated with the token, you provide the token to operations like update
and delete
. WAF uses the token to ensure that no changes have been made to the entity since you last retrieved it. If a change has been made, the update fails with a WAFOptimisticLockException
. If this happens, perform another get
, and use the new token returned by that operation.
Trait Implementations§
source§impl Clone for UpdateRegexPatternSetFluentBuilder
impl Clone for UpdateRegexPatternSetFluentBuilder
source§fn clone(&self) -> UpdateRegexPatternSetFluentBuilder
fn clone(&self) -> UpdateRegexPatternSetFluentBuilder
1.0.0 · source§fn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
source
. Read more