Struct aws_sdk_storagegateway::operation::attach_volume::builders::AttachVolumeFluentBuilder

pub struct AttachVolumeFluentBuilder { /* private fields */ }

Fluent builder constructing a request to AttachVolume.

Connects a volume to an iSCSI connection and then attaches the volume to the specified gateway. Detaching and attaching a volume enables you to recover your data from one gateway to a different gateway without creating a snapshot. It also makes it easier to move your volumes from an on-premises gateway to a gateway hosted on an Amazon EC2 instance.

Implementations

impl AttachVolumeFluentBuilder

pub fn as_input(&self) -> &AttachVolumeInputBuilder

Access the AttachVolume as a reference.

pub async fn send( self ) -> Result<AttachVolumeOutput, SdkError<AttachVolumeError, HttpResponse>>

Sends the request and returns the response.

If an error occurs, an SdkError will be returned with additional details that can be matched against.

By default, any retryable failures will be retried twice. Retry behavior is configurable with the RetryConfig, which can be set when configuring the client.

pub fn customize( self ) -> CustomizableOperation<AttachVolumeOutput, AttachVolumeError, Self>

Consumes this builder, creating a customizable operation that can be modified before being sent.

pub fn gateway_arn(self, input: impl Into<String>) -> Self

The Amazon Resource Name (ARN) of the gateway that you want to attach the volume to.

pub fn set_gateway_arn(self, input: Option<String>) -> Self

The Amazon Resource Name (ARN) of the gateway that you want to attach the volume to.

pub fn get_gateway_arn(&self) -> &Option<String>

The Amazon Resource Name (ARN) of the gateway that you want to attach the volume to.

pub fn target_name(self, input: impl Into<String>) -> Self

The name of the iSCSI target used by an initiator to connect to a volume and used as a suffix for the target ARN. For example, specifying TargetName as myvolume results in the target ARN of arn:aws:storagegateway:us-east-2:111122223333:gateway/sgw-12A3456B/target/iqn.1997-05.com.amazon:myvolume. The target name must be unique across all volumes on a gateway.

If you don't specify a value, Storage Gateway uses the value that was previously used for this volume as the new target name.

pub fn set_target_name(self, input: Option<String>) -> Self

The name of the iSCSI target used by an initiator to connect to a volume and used as a suffix for the target ARN. For example, specifying TargetName as myvolume results in the target ARN of arn:aws:storagegateway:us-east-2:111122223333:gateway/sgw-12A3456B/target/iqn.1997-05.com.amazon:myvolume. The target name must be unique across all volumes on a gateway.

If you don't specify a value, Storage Gateway uses the value that was previously used for this volume as the new target name.

pub fn get_target_name(&self) -> &Option<String>

The name of the iSCSI target used by an initiator to connect to a volume and used as a suffix for the target ARN. For example, specifying TargetName as myvolume results in the target ARN of arn:aws:storagegateway:us-east-2:111122223333:gateway/sgw-12A3456B/target/iqn.1997-05.com.amazon:myvolume. The target name must be unique across all volumes on a gateway.

If you don't specify a value, Storage Gateway uses the value that was previously used for this volume as the new target name.

pub fn volume_arn(self, input: impl Into<String>) -> Self

The Amazon Resource Name (ARN) of the volume to attach to the specified gateway.

pub fn set_volume_arn(self, input: Option<String>) -> Self

The Amazon Resource Name (ARN) of the volume to attach to the specified gateway.

pub fn get_volume_arn(&self) -> &Option<String>

The Amazon Resource Name (ARN) of the volume to attach to the specified gateway.

pub fn network_interface_id(self, input: impl Into<String>) -> Self

The network interface of the gateway on which to expose the iSCSI target. Only IPv4 addresses are accepted. Use DescribeGatewayInformation to get a list of the network interfaces available on a gateway.

Valid Values: A valid IP address.

pub fn set_network_interface_id(self, input: Option<String>) -> Self

The network interface of the gateway on which to expose the iSCSI target. Only IPv4 addresses are accepted. Use DescribeGatewayInformation to get a list of the network interfaces available on a gateway.

Valid Values: A valid IP address.

pub fn get_network_interface_id(&self) -> &Option<String>

The network interface of the gateway on which to expose the iSCSI target. Only IPv4 addresses are accepted. Use DescribeGatewayInformation to get a list of the network interfaces available on a gateway.

Valid Values: A valid IP address.

pub fn disk_id(self, input: impl Into<String>) -> Self

The unique device ID or other distinguishing data that identifies the local disk used to create the volume. This value is only required when you are attaching a stored volume.

pub fn set_disk_id(self, input: Option<String>) -> Self

The unique device ID or other distinguishing data that identifies the local disk used to create the volume. This value is only required when you are attaching a stored volume.

pub fn get_disk_id(&self) -> &Option<String>

The unique device ID or other distinguishing data that identifies the local disk used to create the volume. This value is only required when you are attaching a stored volume.

Trait Implementations

impl Clone for AttachVolumeFluentBuilder

fn clone(&self) -> AttachVolumeFluentBuilder

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for AttachVolumeFluentBuilder

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.