aws_sdk_storagegateway/operation/start_gateway/
builders.rs

1// Code generated by software.amazon.smithy.rust.codegen.smithy-rs. DO NOT EDIT.
2pub use crate::operation::start_gateway::_start_gateway_output::StartGatewayOutputBuilder;
3
4pub use crate::operation::start_gateway::_start_gateway_input::StartGatewayInputBuilder;
5
6impl crate::operation::start_gateway::builders::StartGatewayInputBuilder {
7    /// Sends a request with this input using the given client.
8    pub async fn send_with(
9        self,
10        client: &crate::Client,
11    ) -> ::std::result::Result<
12        crate::operation::start_gateway::StartGatewayOutput,
13        ::aws_smithy_runtime_api::client::result::SdkError<
14            crate::operation::start_gateway::StartGatewayError,
15            ::aws_smithy_runtime_api::client::orchestrator::HttpResponse,
16        >,
17    > {
18        let mut fluent_builder = client.start_gateway();
19        fluent_builder.inner = self;
20        fluent_builder.send().await
21    }
22}
23/// Fluent builder constructing a request to `StartGateway`.
24///
25/// <p>Starts a gateway that you previously shut down (see <code>ShutdownGateway</code>). After the gateway starts, you can then make other API calls, your applications can read from or write to the gateway's storage volumes and you will be able to take snapshot backups.</p><note>
26/// <p>When you make a request, you will get a 200 OK success response immediately. However, it might take some time for the gateway to be ready. You should call <code>DescribeGatewayInformation</code> and check the status before making any additional API calls. For more information, see <code>ActivateGateway</code>.</p>
27/// </note>
28/// <p>To specify which gateway to start, use the Amazon Resource Name (ARN) of the gateway in your request.</p>
29#[derive(::std::clone::Clone, ::std::fmt::Debug)]
30pub struct StartGatewayFluentBuilder {
31    handle: ::std::sync::Arc<crate::client::Handle>,
32    inner: crate::operation::start_gateway::builders::StartGatewayInputBuilder,
33    config_override: ::std::option::Option<crate::config::Builder>,
34}
35impl
36    crate::client::customize::internal::CustomizableSend<
37        crate::operation::start_gateway::StartGatewayOutput,
38        crate::operation::start_gateway::StartGatewayError,
39    > for StartGatewayFluentBuilder
40{
41    fn send(
42        self,
43        config_override: crate::config::Builder,
44    ) -> crate::client::customize::internal::BoxFuture<
45        crate::client::customize::internal::SendResult<
46            crate::operation::start_gateway::StartGatewayOutput,
47            crate::operation::start_gateway::StartGatewayError,
48        >,
49    > {
50        ::std::boxed::Box::pin(async move { self.config_override(config_override).send().await })
51    }
52}
53impl StartGatewayFluentBuilder {
54    /// Creates a new `StartGatewayFluentBuilder`.
55    pub(crate) fn new(handle: ::std::sync::Arc<crate::client::Handle>) -> Self {
56        Self {
57            handle,
58            inner: ::std::default::Default::default(),
59            config_override: ::std::option::Option::None,
60        }
61    }
62    /// Access the StartGateway as a reference.
63    pub fn as_input(&self) -> &crate::operation::start_gateway::builders::StartGatewayInputBuilder {
64        &self.inner
65    }
66    /// Sends the request and returns the response.
67    ///
68    /// If an error occurs, an `SdkError` will be returned with additional details that
69    /// can be matched against.
70    ///
71    /// By default, any retryable failures will be retried twice. Retry behavior
72    /// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
73    /// set when configuring the client.
74    pub async fn send(
75        self,
76    ) -> ::std::result::Result<
77        crate::operation::start_gateway::StartGatewayOutput,
78        ::aws_smithy_runtime_api::client::result::SdkError<
79            crate::operation::start_gateway::StartGatewayError,
80            ::aws_smithy_runtime_api::client::orchestrator::HttpResponse,
81        >,
82    > {
83        let input = self
84            .inner
85            .build()
86            .map_err(::aws_smithy_runtime_api::client::result::SdkError::construction_failure)?;
87        let runtime_plugins = crate::operation::start_gateway::StartGateway::operation_runtime_plugins(
88            self.handle.runtime_plugins.clone(),
89            &self.handle.conf,
90            self.config_override,
91        );
92        crate::operation::start_gateway::StartGateway::orchestrate(&runtime_plugins, input).await
93    }
94
95    /// Consumes this builder, creating a customizable operation that can be modified before being sent.
96    pub fn customize(
97        self,
98    ) -> crate::client::customize::CustomizableOperation<
99        crate::operation::start_gateway::StartGatewayOutput,
100        crate::operation::start_gateway::StartGatewayError,
101        Self,
102    > {
103        crate::client::customize::CustomizableOperation::new(self)
104    }
105    pub(crate) fn config_override(mut self, config_override: impl ::std::convert::Into<crate::config::Builder>) -> Self {
106        self.set_config_override(::std::option::Option::Some(config_override.into()));
107        self
108    }
109
110    pub(crate) fn set_config_override(&mut self, config_override: ::std::option::Option<crate::config::Builder>) -> &mut Self {
111        self.config_override = config_override;
112        self
113    }
114    /// <p>The Amazon Resource Name (ARN) of the gateway. Use the <code>ListGateways</code> operation to return a list of gateways for your account and Amazon Web Services Region.</p>
115    pub fn gateway_arn(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
116        self.inner = self.inner.gateway_arn(input.into());
117        self
118    }
119    /// <p>The Amazon Resource Name (ARN) of the gateway. Use the <code>ListGateways</code> operation to return a list of gateways for your account and Amazon Web Services Region.</p>
120    pub fn set_gateway_arn(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
121        self.inner = self.inner.set_gateway_arn(input);
122        self
123    }
124    /// <p>The Amazon Resource Name (ARN) of the gateway. Use the <code>ListGateways</code> operation to return a list of gateways for your account and Amazon Web Services Region.</p>
125    pub fn get_gateway_arn(&self) -> &::std::option::Option<::std::string::String> {
126        self.inner.get_gateway_arn()
127    }
128}
aws_sdk_storagegateway/operation/start_gateway/builders.rs

aws_sdk_storagegateway/operation/start_gateway/
builders.rs
