// Code generated by software.amazon.smithy.rust.codegen.smithy-rs. DO NOT EDIT.
pub use crate::operation::send_command::_send_command_output::SendCommandOutputBuilder;

pub use crate::operation::send_command::_send_command_input::SendCommandInputBuilder;

impl SendCommandInputBuilder {
    /// Sends a request with this input using the given client.
    pub async fn send_with(
        self,
        client: &crate::Client,
    ) -> ::std::result::Result<
        crate::operation::send_command::SendCommandOutput,
        ::aws_smithy_runtime_api::client::result::SdkError<
            crate::operation::send_command::SendCommandError,
            ::aws_smithy_runtime_api::client::orchestrator::HttpResponse,
        >,
    > {
        let mut fluent_builder = client.send_command();
        fluent_builder.inner = self;
        fluent_builder.send().await
    }
}
/// Fluent builder constructing a request to `SendCommand`.
///
/// <p>Runs commands on one or more managed nodes.</p>
#[derive(::std::clone::Clone, ::std::fmt::Debug)]
pub struct SendCommandFluentBuilder {
    handle: ::std::sync::Arc<crate::client::Handle>,
    inner: crate::operation::send_command::builders::SendCommandInputBuilder,
    config_override: ::std::option::Option<crate::config::Builder>,
}
impl
    crate::client::customize::internal::CustomizableSend<
        crate::operation::send_command::SendCommandOutput,
        crate::operation::send_command::SendCommandError,
    > for SendCommandFluentBuilder
{
    fn send(
        self,
        config_override: crate::config::Builder,
    ) -> crate::client::customize::internal::BoxFuture<
        crate::client::customize::internal::SendResult<
            crate::operation::send_command::SendCommandOutput,
            crate::operation::send_command::SendCommandError,
        >,
    > {
        ::std::boxed::Box::pin(async move { self.config_override(config_override).send().await })
    }
}
impl SendCommandFluentBuilder {
    /// Creates a new `SendCommand`.
    pub(crate) fn new(handle: ::std::sync::Arc<crate::client::Handle>) -> Self {
        Self {
            handle,
            inner: ::std::default::Default::default(),
            config_override: ::std::option::Option::None,
        }
    }
    /// Access the SendCommand as a reference.
    pub fn as_input(&self) -> &crate::operation::send_command::builders::SendCommandInputBuilder {
        &self.inner
    }
    /// Sends the request and returns the response.
    ///
    /// If an error occurs, an `SdkError` will be returned with additional details that
    /// can be matched against.
    ///
    /// By default, any retryable failures will be retried twice. Retry behavior
    /// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
    /// set when configuring the client.
    pub async fn send(
        self,
    ) -> ::std::result::Result<
        crate::operation::send_command::SendCommandOutput,
        ::aws_smithy_runtime_api::client::result::SdkError<
            crate::operation::send_command::SendCommandError,
            ::aws_smithy_runtime_api::client::orchestrator::HttpResponse,
        >,
    > {
        let input = self
            .inner
            .build()
            .map_err(::aws_smithy_runtime_api::client::result::SdkError::construction_failure)?;
        let runtime_plugins = crate::operation::send_command::SendCommand::operation_runtime_plugins(
            self.handle.runtime_plugins.clone(),
            &self.handle.conf,
            self.config_override,
        );
        crate::operation::send_command::SendCommand::orchestrate(&runtime_plugins, input).await
    }

    /// Consumes this builder, creating a customizable operation that can be modified before being sent.
    pub fn customize(
        self,
    ) -> crate::client::customize::CustomizableOperation<
        crate::operation::send_command::SendCommandOutput,
        crate::operation::send_command::SendCommandError,
        Self,
    > {
        crate::client::customize::CustomizableOperation::new(self)
    }
    pub(crate) fn config_override(mut self, config_override: impl Into<crate::config::Builder>) -> Self {
        self.set_config_override(Some(config_override.into()));
        self
    }

    pub(crate) fn set_config_override(&mut self, config_override: Option<crate::config::Builder>) -> &mut Self {
        self.config_override = config_override;
        self
    }
    /// Appends an item to `InstanceIds`.
    ///
    /// To override the contents of this collection use [`set_instance_ids`](Self::set_instance_ids).
    ///
    /// <p>The IDs of the managed nodes where the command should run. Specifying managed node IDs is most useful when you are targeting a limited number of managed nodes, though you can specify up to 50 IDs.</p>
    /// <p>To target a larger number of managed nodes, or if you prefer not to list individual node IDs, we recommend using the <code>Targets</code> option instead. Using <code>Targets</code>, which accepts tag key-value pairs to identify the managed nodes to send commands to, you can a send command to tens, hundreds, or thousands of nodes at once.</p>
    /// <p>For more information about how to use targets, see <a href="https://docs.aws.amazon.com/systems-manager/latest/userguide/send-commands-multiple.html">Using targets and rate controls to send commands to a fleet</a> in the <i>Amazon Web Services Systems Manager User Guide</i>.</p>
    pub fn instance_ids(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
        self.inner = self.inner.instance_ids(input.into());
        self
    }
    /// <p>The IDs of the managed nodes where the command should run. Specifying managed node IDs is most useful when you are targeting a limited number of managed nodes, though you can specify up to 50 IDs.</p>
    /// <p>To target a larger number of managed nodes, or if you prefer not to list individual node IDs, we recommend using the <code>Targets</code> option instead. Using <code>Targets</code>, which accepts tag key-value pairs to identify the managed nodes to send commands to, you can a send command to tens, hundreds, or thousands of nodes at once.</p>
    /// <p>For more information about how to use targets, see <a href="https://docs.aws.amazon.com/systems-manager/latest/userguide/send-commands-multiple.html">Using targets and rate controls to send commands to a fleet</a> in the <i>Amazon Web Services Systems Manager User Guide</i>.</p>
    pub fn set_instance_ids(mut self, input: ::std::option::Option<::std::vec::Vec<::std::string::String>>) -> Self {
        self.inner = self.inner.set_instance_ids(input);
        self
    }
    /// <p>The IDs of the managed nodes where the command should run. Specifying managed node IDs is most useful when you are targeting a limited number of managed nodes, though you can specify up to 50 IDs.</p>
    /// <p>To target a larger number of managed nodes, or if you prefer not to list individual node IDs, we recommend using the <code>Targets</code> option instead. Using <code>Targets</code>, which accepts tag key-value pairs to identify the managed nodes to send commands to, you can a send command to tens, hundreds, or thousands of nodes at once.</p>
    /// <p>For more information about how to use targets, see <a href="https://docs.aws.amazon.com/systems-manager/latest/userguide/send-commands-multiple.html">Using targets and rate controls to send commands to a fleet</a> in the <i>Amazon Web Services Systems Manager User Guide</i>.</p>
    pub fn get_instance_ids(&self) -> &::std::option::Option<::std::vec::Vec<::std::string::String>> {
        self.inner.get_instance_ids()
    }
    /// Appends an item to `Targets`.
    ///
    /// To override the contents of this collection use [`set_targets`](Self::set_targets).
    ///
    /// <p>An array of search criteria that targets managed nodes using a <code>Key,Value</code> combination that you specify. Specifying targets is most useful when you want to send a command to a large number of managed nodes at once. Using <code>Targets</code>, which accepts tag key-value pairs to identify managed nodes, you can send a command to tens, hundreds, or thousands of nodes at once.</p>
    /// <p>To send a command to a smaller number of managed nodes, you can use the <code>InstanceIds</code> option instead.</p>
    /// <p>For more information about how to use targets, see <a href="https://docs.aws.amazon.com/systems-manager/latest/userguide/send-commands-multiple.html">Sending commands to a fleet</a> in the <i>Amazon Web Services Systems Manager User Guide</i>.</p>
    pub fn targets(mut self, input: crate::types::Target) -> Self {
        self.inner = self.inner.targets(input);
        self
    }
    /// <p>An array of search criteria that targets managed nodes using a <code>Key,Value</code> combination that you specify. Specifying targets is most useful when you want to send a command to a large number of managed nodes at once. Using <code>Targets</code>, which accepts tag key-value pairs to identify managed nodes, you can send a command to tens, hundreds, or thousands of nodes at once.</p>
    /// <p>To send a command to a smaller number of managed nodes, you can use the <code>InstanceIds</code> option instead.</p>
    /// <p>For more information about how to use targets, see <a href="https://docs.aws.amazon.com/systems-manager/latest/userguide/send-commands-multiple.html">Sending commands to a fleet</a> in the <i>Amazon Web Services Systems Manager User Guide</i>.</p>
    pub fn set_targets(mut self, input: ::std::option::Option<::std::vec::Vec<crate::types::Target>>) -> Self {
        self.inner = self.inner.set_targets(input);
        self
    }
    /// <p>An array of search criteria that targets managed nodes using a <code>Key,Value</code> combination that you specify. Specifying targets is most useful when you want to send a command to a large number of managed nodes at once. Using <code>Targets</code>, which accepts tag key-value pairs to identify managed nodes, you can send a command to tens, hundreds, or thousands of nodes at once.</p>
    /// <p>To send a command to a smaller number of managed nodes, you can use the <code>InstanceIds</code> option instead.</p>
    /// <p>For more information about how to use targets, see <a href="https://docs.aws.amazon.com/systems-manager/latest/userguide/send-commands-multiple.html">Sending commands to a fleet</a> in the <i>Amazon Web Services Systems Manager User Guide</i>.</p>
    pub fn get_targets(&self) -> &::std::option::Option<::std::vec::Vec<crate::types::Target>> {
        self.inner.get_targets()
    }
    /// <p>The name of the Amazon Web Services Systems Manager document (SSM document) to run. This can be a public document or a custom document. To run a shared document belonging to another account, specify the document Amazon Resource Name (ARN). For more information about how to use shared documents, see <a href="https://docs.aws.amazon.com/systems-manager/latest/userguide/ssm-using-shared.html">Using shared SSM documents</a> in the <i>Amazon Web Services Systems Manager User Guide</i>.</p><note>
    /// <p>If you specify a document name or ARN that hasn't been shared with your account, you receive an <code>InvalidDocument</code> error.</p>
    /// </note>
    pub fn document_name(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
        self.inner = self.inner.document_name(input.into());
        self
    }
    /// <p>The name of the Amazon Web Services Systems Manager document (SSM document) to run. This can be a public document or a custom document. To run a shared document belonging to another account, specify the document Amazon Resource Name (ARN). For more information about how to use shared documents, see <a href="https://docs.aws.amazon.com/systems-manager/latest/userguide/ssm-using-shared.html">Using shared SSM documents</a> in the <i>Amazon Web Services Systems Manager User Guide</i>.</p><note>
    /// <p>If you specify a document name or ARN that hasn't been shared with your account, you receive an <code>InvalidDocument</code> error.</p>
    /// </note>
    pub fn set_document_name(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
        self.inner = self.inner.set_document_name(input);
        self
    }
    /// <p>The name of the Amazon Web Services Systems Manager document (SSM document) to run. This can be a public document or a custom document. To run a shared document belonging to another account, specify the document Amazon Resource Name (ARN). For more information about how to use shared documents, see <a href="https://docs.aws.amazon.com/systems-manager/latest/userguide/ssm-using-shared.html">Using shared SSM documents</a> in the <i>Amazon Web Services Systems Manager User Guide</i>.</p><note>
    /// <p>If you specify a document name or ARN that hasn't been shared with your account, you receive an <code>InvalidDocument</code> error.</p>
    /// </note>
    pub fn get_document_name(&self) -> &::std::option::Option<::std::string::String> {
        self.inner.get_document_name()
    }
    /// <p>The SSM document version to use in the request. You can specify $DEFAULT, $LATEST, or a specific version number. If you run commands by using the Command Line Interface (Amazon Web Services CLI), then you must escape the first two options by using a backslash. If you specify a version number, then you don't need to use the backslash. For example:</p>
    /// <p>--document-version "\$DEFAULT"</p>
    /// <p>--document-version "\$LATEST"</p>
    /// <p>--document-version "3"</p>
    pub fn document_version(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
        self.inner = self.inner.document_version(input.into());
        self
    }
    /// <p>The SSM document version to use in the request. You can specify $DEFAULT, $LATEST, or a specific version number. If you run commands by using the Command Line Interface (Amazon Web Services CLI), then you must escape the first two options by using a backslash. If you specify a version number, then you don't need to use the backslash. For example:</p>
    /// <p>--document-version "\$DEFAULT"</p>
    /// <p>--document-version "\$LATEST"</p>
    /// <p>--document-version "3"</p>
    pub fn set_document_version(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
        self.inner = self.inner.set_document_version(input);
        self
    }
    /// <p>The SSM document version to use in the request. You can specify $DEFAULT, $LATEST, or a specific version number. If you run commands by using the Command Line Interface (Amazon Web Services CLI), then you must escape the first two options by using a backslash. If you specify a version number, then you don't need to use the backslash. For example:</p>
    /// <p>--document-version "\$DEFAULT"</p>
    /// <p>--document-version "\$LATEST"</p>
    /// <p>--document-version "3"</p>
    pub fn get_document_version(&self) -> &::std::option::Option<::std::string::String> {
        self.inner.get_document_version()
    }
    /// <p>The Sha256 or Sha1 hash created by the system when the document was created.</p><note>
    /// <p>Sha1 hashes have been deprecated.</p>
    /// </note>
    pub fn document_hash(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
        self.inner = self.inner.document_hash(input.into());
        self
    }
    /// <p>The Sha256 or Sha1 hash created by the system when the document was created.</p><note>
    /// <p>Sha1 hashes have been deprecated.</p>
    /// </note>
    pub fn set_document_hash(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
        self.inner = self.inner.set_document_hash(input);
        self
    }
    /// <p>The Sha256 or Sha1 hash created by the system when the document was created.</p><note>
    /// <p>Sha1 hashes have been deprecated.</p>
    /// </note>
    pub fn get_document_hash(&self) -> &::std::option::Option<::std::string::String> {
        self.inner.get_document_hash()
    }
    /// <p>Sha256 or Sha1.</p><note>
    /// <p>Sha1 hashes have been deprecated.</p>
    /// </note>
    pub fn document_hash_type(mut self, input: crate::types::DocumentHashType) -> Self {
        self.inner = self.inner.document_hash_type(input);
        self
    }
    /// <p>Sha256 or Sha1.</p><note>
    /// <p>Sha1 hashes have been deprecated.</p>
    /// </note>
    pub fn set_document_hash_type(mut self, input: ::std::option::Option<crate::types::DocumentHashType>) -> Self {
        self.inner = self.inner.set_document_hash_type(input);
        self
    }
    /// <p>Sha256 or Sha1.</p><note>
    /// <p>Sha1 hashes have been deprecated.</p>
    /// </note>
    pub fn get_document_hash_type(&self) -> &::std::option::Option<crate::types::DocumentHashType> {
        self.inner.get_document_hash_type()
    }
    /// <p>If this time is reached and the command hasn't already started running, it won't run.</p>
    pub fn timeout_seconds(mut self, input: i32) -> Self {
        self.inner = self.inner.timeout_seconds(input);
        self
    }
    /// <p>If this time is reached and the command hasn't already started running, it won't run.</p>
    pub fn set_timeout_seconds(mut self, input: ::std::option::Option<i32>) -> Self {
        self.inner = self.inner.set_timeout_seconds(input);
        self
    }
    /// <p>If this time is reached and the command hasn't already started running, it won't run.</p>
    pub fn get_timeout_seconds(&self) -> &::std::option::Option<i32> {
        self.inner.get_timeout_seconds()
    }
    /// <p>User-specified information about the command, such as a brief description of what the command should do.</p>
    pub fn comment(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
        self.inner = self.inner.comment(input.into());
        self
    }
    /// <p>User-specified information about the command, such as a brief description of what the command should do.</p>
    pub fn set_comment(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
        self.inner = self.inner.set_comment(input);
        self
    }
    /// <p>User-specified information about the command, such as a brief description of what the command should do.</p>
    pub fn get_comment(&self) -> &::std::option::Option<::std::string::String> {
        self.inner.get_comment()
    }
    /// Adds a key-value pair to `Parameters`.
    ///
    /// To override the contents of this collection use [`set_parameters`](Self::set_parameters).
    ///
    /// <p>The required and optional parameters specified in the document being run.</p>
    pub fn parameters(mut self, k: impl ::std::convert::Into<::std::string::String>, v: ::std::vec::Vec<::std::string::String>) -> Self {
        self.inner = self.inner.parameters(k.into(), v);
        self
    }
    /// <p>The required and optional parameters specified in the document being run.</p>
    pub fn set_parameters(
        mut self,
        input: ::std::option::Option<::std::collections::HashMap<::std::string::String, ::std::vec::Vec<::std::string::String>>>,
    ) -> Self {
        self.inner = self.inner.set_parameters(input);
        self
    }
    /// <p>The required and optional parameters specified in the document being run.</p>
    pub fn get_parameters(
        &self,
    ) -> &::std::option::Option<::std::collections::HashMap<::std::string::String, ::std::vec::Vec<::std::string::String>>> {
        self.inner.get_parameters()
    }
    /// <p>(Deprecated) You can no longer specify this parameter. The system ignores it. Instead, Systems Manager automatically determines the Amazon Web Services Region of the S3 bucket.</p>
    pub fn output_s3_region(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
        self.inner = self.inner.output_s3_region(input.into());
        self
    }
    /// <p>(Deprecated) You can no longer specify this parameter. The system ignores it. Instead, Systems Manager automatically determines the Amazon Web Services Region of the S3 bucket.</p>
    pub fn set_output_s3_region(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
        self.inner = self.inner.set_output_s3_region(input);
        self
    }
    /// <p>(Deprecated) You can no longer specify this parameter. The system ignores it. Instead, Systems Manager automatically determines the Amazon Web Services Region of the S3 bucket.</p>
    pub fn get_output_s3_region(&self) -> &::std::option::Option<::std::string::String> {
        self.inner.get_output_s3_region()
    }
    /// <p>The name of the S3 bucket where command execution responses should be stored.</p>
    pub fn output_s3_bucket_name(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
        self.inner = self.inner.output_s3_bucket_name(input.into());
        self
    }
    /// <p>The name of the S3 bucket where command execution responses should be stored.</p>
    pub fn set_output_s3_bucket_name(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
        self.inner = self.inner.set_output_s3_bucket_name(input);
        self
    }
    /// <p>The name of the S3 bucket where command execution responses should be stored.</p>
    pub fn get_output_s3_bucket_name(&self) -> &::std::option::Option<::std::string::String> {
        self.inner.get_output_s3_bucket_name()
    }
    /// <p>The directory structure within the S3 bucket where the responses should be stored.</p>
    pub fn output_s3_key_prefix(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
        self.inner = self.inner.output_s3_key_prefix(input.into());
        self
    }
    /// <p>The directory structure within the S3 bucket where the responses should be stored.</p>
    pub fn set_output_s3_key_prefix(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
        self.inner = self.inner.set_output_s3_key_prefix(input);
        self
    }
    /// <p>The directory structure within the S3 bucket where the responses should be stored.</p>
    pub fn get_output_s3_key_prefix(&self) -> &::std::option::Option<::std::string::String> {
        self.inner.get_output_s3_key_prefix()
    }
    /// <p>(Optional) The maximum number of managed nodes that are allowed to run the command at the same time. You can specify a number such as 10 or a percentage such as 10%. The default value is <code>50</code>. For more information about how to use <code>MaxConcurrency</code>, see <a href="https://docs.aws.amazon.com/systems-manager/latest/userguide/send-commands-multiple.html#send-commands-velocity">Using concurrency controls</a> in the <i>Amazon Web Services Systems Manager User Guide</i>.</p>
    pub fn max_concurrency(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
        self.inner = self.inner.max_concurrency(input.into());
        self
    }
    /// <p>(Optional) The maximum number of managed nodes that are allowed to run the command at the same time. You can specify a number such as 10 or a percentage such as 10%. The default value is <code>50</code>. For more information about how to use <code>MaxConcurrency</code>, see <a href="https://docs.aws.amazon.com/systems-manager/latest/userguide/send-commands-multiple.html#send-commands-velocity">Using concurrency controls</a> in the <i>Amazon Web Services Systems Manager User Guide</i>.</p>
    pub fn set_max_concurrency(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
        self.inner = self.inner.set_max_concurrency(input);
        self
    }
    /// <p>(Optional) The maximum number of managed nodes that are allowed to run the command at the same time. You can specify a number such as 10 or a percentage such as 10%. The default value is <code>50</code>. For more information about how to use <code>MaxConcurrency</code>, see <a href="https://docs.aws.amazon.com/systems-manager/latest/userguide/send-commands-multiple.html#send-commands-velocity">Using concurrency controls</a> in the <i>Amazon Web Services Systems Manager User Guide</i>.</p>
    pub fn get_max_concurrency(&self) -> &::std::option::Option<::std::string::String> {
        self.inner.get_max_concurrency()
    }
    /// <p>The maximum number of errors allowed without the command failing. When the command fails one more time beyond the value of <code>MaxErrors</code>, the systems stops sending the command to additional targets. You can specify a number like 10 or a percentage like 10%. The default value is <code>0</code>. For more information about how to use <code>MaxErrors</code>, see <a href="https://docs.aws.amazon.com/systems-manager/latest/userguide/send-commands-multiple.html#send-commands-maxerrors">Using error controls</a> in the <i>Amazon Web Services Systems Manager User Guide</i>.</p>
    pub fn max_errors(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
        self.inner = self.inner.max_errors(input.into());
        self
    }
    /// <p>The maximum number of errors allowed without the command failing. When the command fails one more time beyond the value of <code>MaxErrors</code>, the systems stops sending the command to additional targets. You can specify a number like 10 or a percentage like 10%. The default value is <code>0</code>. For more information about how to use <code>MaxErrors</code>, see <a href="https://docs.aws.amazon.com/systems-manager/latest/userguide/send-commands-multiple.html#send-commands-maxerrors">Using error controls</a> in the <i>Amazon Web Services Systems Manager User Guide</i>.</p>
    pub fn set_max_errors(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
        self.inner = self.inner.set_max_errors(input);
        self
    }
    /// <p>The maximum number of errors allowed without the command failing. When the command fails one more time beyond the value of <code>MaxErrors</code>, the systems stops sending the command to additional targets. You can specify a number like 10 or a percentage like 10%. The default value is <code>0</code>. For more information about how to use <code>MaxErrors</code>, see <a href="https://docs.aws.amazon.com/systems-manager/latest/userguide/send-commands-multiple.html#send-commands-maxerrors">Using error controls</a> in the <i>Amazon Web Services Systems Manager User Guide</i>.</p>
    pub fn get_max_errors(&self) -> &::std::option::Option<::std::string::String> {
        self.inner.get_max_errors()
    }
    /// <p>The ARN of the Identity and Access Management (IAM) service role to use to publish Amazon Simple Notification Service (Amazon SNS) notifications for Run Command commands.</p>
    /// <p>This role must provide the <code>sns:Publish</code> permission for your notification topic. For information about creating and using this service role, see <a href="https://docs.aws.amazon.com/systems-manager/latest/userguide/monitoring-sns-notifications.html">Monitoring Systems Manager status changes using Amazon SNS notifications</a> in the <i>Amazon Web Services Systems Manager User Guide</i>.</p>
    pub fn service_role_arn(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
        self.inner = self.inner.service_role_arn(input.into());
        self
    }
    /// <p>The ARN of the Identity and Access Management (IAM) service role to use to publish Amazon Simple Notification Service (Amazon SNS) notifications for Run Command commands.</p>
    /// <p>This role must provide the <code>sns:Publish</code> permission for your notification topic. For information about creating and using this service role, see <a href="https://docs.aws.amazon.com/systems-manager/latest/userguide/monitoring-sns-notifications.html">Monitoring Systems Manager status changes using Amazon SNS notifications</a> in the <i>Amazon Web Services Systems Manager User Guide</i>.</p>
    pub fn set_service_role_arn(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
        self.inner = self.inner.set_service_role_arn(input);
        self
    }
    /// <p>The ARN of the Identity and Access Management (IAM) service role to use to publish Amazon Simple Notification Service (Amazon SNS) notifications for Run Command commands.</p>
    /// <p>This role must provide the <code>sns:Publish</code> permission for your notification topic. For information about creating and using this service role, see <a href="https://docs.aws.amazon.com/systems-manager/latest/userguide/monitoring-sns-notifications.html">Monitoring Systems Manager status changes using Amazon SNS notifications</a> in the <i>Amazon Web Services Systems Manager User Guide</i>.</p>
    pub fn get_service_role_arn(&self) -> &::std::option::Option<::std::string::String> {
        self.inner.get_service_role_arn()
    }
    /// <p>Configurations for sending notifications.</p>
    pub fn notification_config(mut self, input: crate::types::NotificationConfig) -> Self {
        self.inner = self.inner.notification_config(input);
        self
    }
    /// <p>Configurations for sending notifications.</p>
    pub fn set_notification_config(mut self, input: ::std::option::Option<crate::types::NotificationConfig>) -> Self {
        self.inner = self.inner.set_notification_config(input);
        self
    }
    /// <p>Configurations for sending notifications.</p>
    pub fn get_notification_config(&self) -> &::std::option::Option<crate::types::NotificationConfig> {
        self.inner.get_notification_config()
    }
    /// <p>Enables Amazon Web Services Systems Manager to send Run Command output to Amazon CloudWatch Logs. Run Command is a capability of Amazon Web Services Systems Manager.</p>
    pub fn cloud_watch_output_config(mut self, input: crate::types::CloudWatchOutputConfig) -> Self {
        self.inner = self.inner.cloud_watch_output_config(input);
        self
    }
    /// <p>Enables Amazon Web Services Systems Manager to send Run Command output to Amazon CloudWatch Logs. Run Command is a capability of Amazon Web Services Systems Manager.</p>
    pub fn set_cloud_watch_output_config(mut self, input: ::std::option::Option<crate::types::CloudWatchOutputConfig>) -> Self {
        self.inner = self.inner.set_cloud_watch_output_config(input);
        self
    }
    /// <p>Enables Amazon Web Services Systems Manager to send Run Command output to Amazon CloudWatch Logs. Run Command is a capability of Amazon Web Services Systems Manager.</p>
    pub fn get_cloud_watch_output_config(&self) -> &::std::option::Option<crate::types::CloudWatchOutputConfig> {
        self.inner.get_cloud_watch_output_config()
    }
    /// <p>The CloudWatch alarm you want to apply to your command.</p>
    pub fn alarm_configuration(mut self, input: crate::types::AlarmConfiguration) -> Self {
        self.inner = self.inner.alarm_configuration(input);
        self
    }
    /// <p>The CloudWatch alarm you want to apply to your command.</p>
    pub fn set_alarm_configuration(mut self, input: ::std::option::Option<crate::types::AlarmConfiguration>) -> Self {
        self.inner = self.inner.set_alarm_configuration(input);
        self
    }
    /// <p>The CloudWatch alarm you want to apply to your command.</p>
    pub fn get_alarm_configuration(&self) -> &::std::option::Option<crate::types::AlarmConfiguration> {
        self.inner.get_alarm_configuration()
    }
}