// Code generated by software.amazon.smithy.rust.codegen.smithy-rs. DO NOT EDIT.
pub use crate::operation::update_patch_baseline::_update_patch_baseline_output::UpdatePatchBaselineOutputBuilder;

pub use crate::operation::update_patch_baseline::_update_patch_baseline_input::UpdatePatchBaselineInputBuilder;

/// Fluent builder constructing a request to `UpdatePatchBaseline`.
///
/// <p>Modifies an existing patch baseline. Fields not specified in the request are left unchanged.</p> <note>
/// <p>For information about valid key-value pairs in <code>PatchFilters</code> for each supported operating system type, see <code>PatchFilter</code>.</p>
/// </note>
#[derive(std::clone::Clone, std::fmt::Debug)]
pub struct UpdatePatchBaselineFluentBuilder {
    handle: std::sync::Arc<crate::client::Handle>,
    inner: crate::operation::update_patch_baseline::builders::UpdatePatchBaselineInputBuilder,
}
impl UpdatePatchBaselineFluentBuilder {
    /// Creates a new `UpdatePatchBaseline`.
    pub(crate) fn new(handle: std::sync::Arc<crate::client::Handle>) -> Self {
        Self {
            handle,
            inner: Default::default(),
        }
    }

    /// Consume this builder, creating a customizable operation that can be modified before being
    /// sent. The operation's inner [http::Request] can be modified as well.
    pub async fn customize(
        self,
    ) -> std::result::Result<
        crate::client::customize::CustomizableOperation<
            crate::operation::update_patch_baseline::UpdatePatchBaseline,
            aws_http::retry::AwsResponseRetryClassifier,
        >,
        aws_smithy_http::result::SdkError<
            crate::operation::update_patch_baseline::UpdatePatchBaselineError,
        >,
    > {
        let handle = self.handle.clone();
        let operation = self
            .inner
            .build()
            .map_err(aws_smithy_http::result::SdkError::construction_failure)?
            .make_operation(&handle.conf)
            .await
            .map_err(aws_smithy_http::result::SdkError::construction_failure)?;
        Ok(crate::client::customize::CustomizableOperation { handle, operation })
    }

    /// Sends the request and returns the response.
    ///
    /// If an error occurs, an `SdkError` will be returned with additional details that
    /// can be matched against.
    ///
    /// By default, any retryable failures will be retried twice. Retry behavior
    /// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
    /// set when configuring the client.
    pub async fn send(
        self,
    ) -> std::result::Result<
        crate::operation::update_patch_baseline::UpdatePatchBaselineOutput,
        aws_smithy_http::result::SdkError<
            crate::operation::update_patch_baseline::UpdatePatchBaselineError,
        >,
    > {
        let op = self
            .inner
            .build()
            .map_err(aws_smithy_http::result::SdkError::construction_failure)?
            .make_operation(&self.handle.conf)
            .await
            .map_err(aws_smithy_http::result::SdkError::construction_failure)?;
        self.handle.client.call(op).await
    }
    /// <p>The ID of the patch baseline to update.</p>
    pub fn baseline_id(mut self, input: impl Into<std::string::String>) -> Self {
        self.inner = self.inner.baseline_id(input.into());
        self
    }
    /// <p>The ID of the patch baseline to update.</p>
    pub fn set_baseline_id(mut self, input: std::option::Option<std::string::String>) -> Self {
        self.inner = self.inner.set_baseline_id(input);
        self
    }
    /// <p>The name of the patch baseline.</p>
    pub fn name(mut self, input: impl Into<std::string::String>) -> Self {
        self.inner = self.inner.name(input.into());
        self
    }
    /// <p>The name of the patch baseline.</p>
    pub fn set_name(mut self, input: std::option::Option<std::string::String>) -> Self {
        self.inner = self.inner.set_name(input);
        self
    }
    /// <p>A set of global filters used to include patches in the baseline.</p>
    pub fn global_filters(mut self, input: crate::types::PatchFilterGroup) -> Self {
        self.inner = self.inner.global_filters(input);
        self
    }
    /// <p>A set of global filters used to include patches in the baseline.</p>
    pub fn set_global_filters(
        mut self,
        input: std::option::Option<crate::types::PatchFilterGroup>,
    ) -> Self {
        self.inner = self.inner.set_global_filters(input);
        self
    }
    /// <p>A set of rules used to include patches in the baseline.</p>
    pub fn approval_rules(mut self, input: crate::types::PatchRuleGroup) -> Self {
        self.inner = self.inner.approval_rules(input);
        self
    }
    /// <p>A set of rules used to include patches in the baseline.</p>
    pub fn set_approval_rules(
        mut self,
        input: std::option::Option<crate::types::PatchRuleGroup>,
    ) -> Self {
        self.inner = self.inner.set_approval_rules(input);
        self
    }
    /// Appends an item to `ApprovedPatches`.
    ///
    /// To override the contents of this collection use [`set_approved_patches`](Self::set_approved_patches).
    ///
    /// <p>A list of explicitly approved patches for the baseline.</p>
    /// <p>For information about accepted formats for lists of approved patches and rejected patches, see <a href="https://docs.aws.amazon.com/systems-manager/latest/userguide/patch-manager-approved-rejected-package-name-formats.html">About package name formats for approved and rejected patch lists</a> in the <i>Amazon Web Services Systems Manager User Guide</i>.</p>
    pub fn approved_patches(mut self, input: impl Into<std::string::String>) -> Self {
        self.inner = self.inner.approved_patches(input.into());
        self
    }
    /// <p>A list of explicitly approved patches for the baseline.</p>
    /// <p>For information about accepted formats for lists of approved patches and rejected patches, see <a href="https://docs.aws.amazon.com/systems-manager/latest/userguide/patch-manager-approved-rejected-package-name-formats.html">About package name formats for approved and rejected patch lists</a> in the <i>Amazon Web Services Systems Manager User Guide</i>.</p>
    pub fn set_approved_patches(
        mut self,
        input: std::option::Option<std::vec::Vec<std::string::String>>,
    ) -> Self {
        self.inner = self.inner.set_approved_patches(input);
        self
    }
    /// <p>Assigns a new compliance severity level to an existing patch baseline.</p>
    pub fn approved_patches_compliance_level(
        mut self,
        input: crate::types::PatchComplianceLevel,
    ) -> Self {
        self.inner = self.inner.approved_patches_compliance_level(input);
        self
    }
    /// <p>Assigns a new compliance severity level to an existing patch baseline.</p>
    pub fn set_approved_patches_compliance_level(
        mut self,
        input: std::option::Option<crate::types::PatchComplianceLevel>,
    ) -> Self {
        self.inner = self.inner.set_approved_patches_compliance_level(input);
        self
    }
    /// <p>Indicates whether the list of approved patches includes non-security updates that should be applied to the managed nodes. The default value is <code>false</code>. Applies to Linux managed nodes only.</p>
    pub fn approved_patches_enable_non_security(mut self, input: bool) -> Self {
        self.inner = self.inner.approved_patches_enable_non_security(input);
        self
    }
    /// <p>Indicates whether the list of approved patches includes non-security updates that should be applied to the managed nodes. The default value is <code>false</code>. Applies to Linux managed nodes only.</p>
    pub fn set_approved_patches_enable_non_security(
        mut self,
        input: std::option::Option<bool>,
    ) -> Self {
        self.inner = self.inner.set_approved_patches_enable_non_security(input);
        self
    }
    /// Appends an item to `RejectedPatches`.
    ///
    /// To override the contents of this collection use [`set_rejected_patches`](Self::set_rejected_patches).
    ///
    /// <p>A list of explicitly rejected patches for the baseline.</p>
    /// <p>For information about accepted formats for lists of approved patches and rejected patches, see <a href="https://docs.aws.amazon.com/systems-manager/latest/userguide/patch-manager-approved-rejected-package-name-formats.html">About package name formats for approved and rejected patch lists</a> in the <i>Amazon Web Services Systems Manager User Guide</i>.</p>
    pub fn rejected_patches(mut self, input: impl Into<std::string::String>) -> Self {
        self.inner = self.inner.rejected_patches(input.into());
        self
    }
    /// <p>A list of explicitly rejected patches for the baseline.</p>
    /// <p>For information about accepted formats for lists of approved patches and rejected patches, see <a href="https://docs.aws.amazon.com/systems-manager/latest/userguide/patch-manager-approved-rejected-package-name-formats.html">About package name formats for approved and rejected patch lists</a> in the <i>Amazon Web Services Systems Manager User Guide</i>.</p>
    pub fn set_rejected_patches(
        mut self,
        input: std::option::Option<std::vec::Vec<std::string::String>>,
    ) -> Self {
        self.inner = self.inner.set_rejected_patches(input);
        self
    }
    /// <p>The action for Patch Manager to take on patches included in the <code>RejectedPackages</code> list.</p>
    /// <ul>
    /// <li> <p> <b> <code>ALLOW_AS_DEPENDENCY</code> </b>: A package in the <code>Rejected</code> patches list is installed only if it is a dependency of another package. It is considered compliant with the patch baseline, and its status is reported as <code>InstalledOther</code>. This is the default action if no option is specified.</p> </li>
    /// <li> <p> <b> <code>BLOCK</code> </b>: Packages in the <code>RejectedPatches</code> list, and packages that include them as dependencies, aren't installed under any circumstances. If a package was installed before it was added to the <code>Rejected</code> patches list, it is considered non-compliant with the patch baseline, and its status is reported as <code>InstalledRejected</code>.</p> </li>
    /// </ul>
    pub fn rejected_patches_action(mut self, input: crate::types::PatchAction) -> Self {
        self.inner = self.inner.rejected_patches_action(input);
        self
    }
    /// <p>The action for Patch Manager to take on patches included in the <code>RejectedPackages</code> list.</p>
    /// <ul>
    /// <li> <p> <b> <code>ALLOW_AS_DEPENDENCY</code> </b>: A package in the <code>Rejected</code> patches list is installed only if it is a dependency of another package. It is considered compliant with the patch baseline, and its status is reported as <code>InstalledOther</code>. This is the default action if no option is specified.</p> </li>
    /// <li> <p> <b> <code>BLOCK</code> </b>: Packages in the <code>RejectedPatches</code> list, and packages that include them as dependencies, aren't installed under any circumstances. If a package was installed before it was added to the <code>Rejected</code> patches list, it is considered non-compliant with the patch baseline, and its status is reported as <code>InstalledRejected</code>.</p> </li>
    /// </ul>
    pub fn set_rejected_patches_action(
        mut self,
        input: std::option::Option<crate::types::PatchAction>,
    ) -> Self {
        self.inner = self.inner.set_rejected_patches_action(input);
        self
    }
    /// <p>A description of the patch baseline.</p>
    pub fn description(mut self, input: impl Into<std::string::String>) -> Self {
        self.inner = self.inner.description(input.into());
        self
    }
    /// <p>A description of the patch baseline.</p>
    pub fn set_description(mut self, input: std::option::Option<std::string::String>) -> Self {
        self.inner = self.inner.set_description(input);
        self
    }
    /// Appends an item to `Sources`.
    ///
    /// To override the contents of this collection use [`set_sources`](Self::set_sources).
    ///
    /// <p>Information about the patches to use to update the managed nodes, including target operating systems and source repositories. Applies to Linux managed nodes only.</p>
    pub fn sources(mut self, input: crate::types::PatchSource) -> Self {
        self.inner = self.inner.sources(input);
        self
    }
    /// <p>Information about the patches to use to update the managed nodes, including target operating systems and source repositories. Applies to Linux managed nodes only.</p>
    pub fn set_sources(
        mut self,
        input: std::option::Option<std::vec::Vec<crate::types::PatchSource>>,
    ) -> Self {
        self.inner = self.inner.set_sources(input);
        self
    }
    /// <p>If True, then all fields that are required by the <code>CreatePatchBaseline</code> operation are also required for this API request. Optional fields that aren't specified are set to null.</p>
    pub fn replace(mut self, input: bool) -> Self {
        self.inner = self.inner.replace(input);
        self
    }
    /// <p>If True, then all fields that are required by the <code>CreatePatchBaseline</code> operation are also required for this API request. Optional fields that aren't specified are set to null.</p>
    pub fn set_replace(mut self, input: std::option::Option<bool>) -> Self {
        self.inner = self.inner.set_replace(input);
        self
    }
}