Struct aws_sdk_shield::client::Client

source · [−]

pub struct Client { /* private fields */ }

Expand description

Client for AWS Shield

Client for invoking operations on AWS Shield. Each operation on AWS Shield is a method on this this struct. .send() MUST be invoked on the generated operations to dispatch the request to the service.

Examples

Constructing a client and invoking an operation

    // create a shared configuration. This can be used & shared between multiple service clients.
    let shared_config = aws_config::load_from_env().await;
    let client = aws_sdk_shield::Client::new(&shared_config);
    // invoke an operation
    /* let rsp = client
        .<operation_name>().
        .<param>("some value")
        .send().await; */

Constructing a client with custom configuration

use aws_config::RetryConfig;
let shared_config = aws_config::load_from_env().await;
let config = aws_sdk_shield::config::Builder::from(&shared_config)
  .retry_config(RetryConfig::disabled())
  .build();
let client = aws_sdk_shield::Client::from_conf(config);

Implementations

source

impl Client

source

pub fn with_config(
client: Client<DynConnector, DynMiddleware<DynConnector>>,
conf: Config
) -> Self

Creates a client with the given service configuration.

source

pub fn conf(&self) -> &Config

Returns the client’s configuration.

source

impl Client

source

pub fn associate_drt_log_bucket(&self) -> AssociateDRTLogBucket

Constructs a fluent builder for the AssociateDRTLogBucket operation.

The fluent builder is configurable:
- log_bucket(impl Into<String>) / set_log_bucket(Option<String>):
 The Amazon S3 bucket that contains the logs that you want to share.
On success, responds with AssociateDrtLogBucketOutput
On failure, responds with SdkError<AssociateDRTLogBucketError>

source

pub fn associate_drt_role(&self) -> AssociateDRTRole

Constructs a fluent builder for the AssociateDRTRole operation.

The fluent builder is configurable:
- role_arn(impl Into<String>) / set_role_arn(Option<String>):
 The Amazon Resource Name (ARN) of the role the SRT will use to access your Amazon Web Services account.
 
 Prior to making the AssociateDRTRole request, you must attach the AWSShieldDRTAccessPolicy managed policy to this role. For more information see Attaching and Detaching IAM Policies.
On success, responds with AssociateDrtRoleOutput
On failure, responds with SdkError<AssociateDRTRoleError>

source

pub fn associate_health_check(&self) -> AssociateHealthCheck

Constructs a fluent builder for the AssociateHealthCheck operation.

The fluent builder is configurable:
- protection_id(impl Into<String>) / set_protection_id(Option<String>):
 The unique identifier (ID) for the Protection object to add the health check association to.
- health_check_arn(impl Into<String>) / set_health_check_arn(Option<String>):
 The Amazon Resource Name (ARN) of the health check to associate with the protection.
On success, responds with AssociateHealthCheckOutput
On failure, responds with SdkError<AssociateHealthCheckError>

source

pub fn associate_proactive_engagement_details(
&self
) -> AssociateProactiveEngagementDetails

Constructs a fluent builder for the AssociateProactiveEngagementDetails operation.

The fluent builder is configurable:
- emergency_contact_list(Vec<EmergencyContact>) / set_emergency_contact_list(Option<Vec<EmergencyContact>>):
 A list of email addresses and phone numbers that the Shield Response Team (SRT) can use to contact you for escalations to the SRT and to initiate proactive customer support.
 
 To enable proactive engagement, the contact list must include at least one phone number.
 
 The contacts that you provide here replace any contacts that were already defined. If you already have contacts defined and want to use them, retrieve the list using DescribeEmergencyContactSettings and then provide it here.
On success, responds with AssociateProactiveEngagementDetailsOutput
On failure, responds with SdkError<AssociateProactiveEngagementDetailsError>

source

pub fn create_protection(&self) -> CreateProtection

Constructs a fluent builder for the CreateProtection operation.

The fluent builder is configurable:
- name(impl Into<String>) / set_name(Option<String>):
 Friendly name for the Protection you are creating.
- resource_arn(impl Into<String>) / set_resource_arn(Option<String>):
 The ARN (Amazon Resource Name) of the resource to be protected.
 
 The ARN should be in one of the following formats:
 - For an Application Load Balancer: arn:aws:elasticloadbalancing:region:account-id:loadbalancer/app/load-balancer-name/load-balancer-id
 - For an Elastic Load Balancer (Classic Load Balancer): arn:aws:elasticloadbalancing:region:account-id:loadbalancer/load-balancer-name
 - For an Amazon CloudFront distribution: arn:aws:cloudfront::account-id:distribution/distribution-id
 - For an Global Accelerator accelerator: arn:aws:globalaccelerator::account-id:accelerator/accelerator-id
 - For Amazon Route 53: arn:aws:route53:::hostedzone/hosted-zone-id
 - For an Elastic IP address: arn:aws:ec2:region:account-id:eip-allocation/allocation-id
- tags(Vec<Tag>) / set_tags(Option<Vec<Tag>>):
 One or more tag key-value pairs for the Protection object that is created.
On success, responds with CreateProtectionOutput with field(s):
- protection_id(Option<String>):
 The unique identifier (ID) for the Protection object that is created.
On failure, responds with SdkError<CreateProtectionError>

source

pub fn create_protection_group(&self) -> CreateProtectionGroup

Constructs a fluent builder for the CreateProtectionGroup operation.

The fluent builder is configurable:
- protection_group_id(impl Into<String>) / set_protection_group_id(Option<String>):
 The name of the protection group. You use this to identify the protection group in lists and to manage the protection group, for example to update, delete, or describe it.
- aggregation(ProtectionGroupAggregation) / set_aggregation(Option<ProtectionGroupAggregation>):
 Defines how Shield combines resource data for the group in order to detect, mitigate, and report events.
 - Sum - Use the total traffic across the group. This is a good choice for most cases. Examples include Elastic IP addresses for EC2 instances that scale manually or automatically.
 - Mean - Use the average of the traffic across the group. This is a good choice for resources that share traffic uniformly. Examples include accelerators and load balancers.
 - Max - Use the highest traffic from each resource. This is useful for resources that don’t share traffic and for resources that share that traffic in a non-uniform way. Examples include Amazon CloudFront and origin resources for CloudFront distributions.
- pattern(ProtectionGroupPattern) / set_pattern(Option<ProtectionGroupPattern>):
 The criteria to use to choose the protected resources for inclusion in the group. You can include all resources that have protections, provide a list of resource Amazon Resource Names (ARNs), or include all resources of a specified resource type.
- resource_type(ProtectedResourceType) / set_resource_type(Option<ProtectedResourceType>):
 The resource type to include in the protection group. All protected resources of this type are included in the protection group. Newly protected resources of this type are automatically added to the group. You must set this when you set Pattern to BY_RESOURCE_TYPE and you must not set it for any other Pattern setting.
- members(Vec<String>) / set_members(Option<Vec<String>>):
 The Amazon Resource Names (ARNs) of the resources to include in the protection group. You must set this when you set Pattern to ARBITRARY and you must not set it for any other Pattern setting.
- tags(Vec<Tag>) / set_tags(Option<Vec<Tag>>):
 One or more tag key-value pairs for the protection group.
On success, responds with CreateProtectionGroupOutput
On failure, responds with SdkError<CreateProtectionGroupError>

source

pub fn create_subscription(&self) -> CreateSubscription

Constructs a fluent builder for the CreateSubscription operation.

The fluent builder takes no input, just send it.
On success, responds with CreateSubscriptionOutput
On failure, responds with SdkError<CreateSubscriptionError>

source

pub fn delete_protection(&self) -> DeleteProtection

Constructs a fluent builder for the DeleteProtection operation.

The fluent builder is configurable:
- protection_id(impl Into<String>) / set_protection_id(Option<String>):
 The unique identifier (ID) for the Protection object to be deleted.
On success, responds with DeleteProtectionOutput
On failure, responds with SdkError<DeleteProtectionError>

source

pub fn delete_protection_group(&self) -> DeleteProtectionGroup

Constructs a fluent builder for the DeleteProtectionGroup operation.

The fluent builder is configurable:
- protection_group_id(impl Into<String>) / set_protection_group_id(Option<String>):
 The name of the protection group. You use this to identify the protection group in lists and to manage the protection group, for example to update, delete, or describe it.
On success, responds with DeleteProtectionGroupOutput
On failure, responds with SdkError<DeleteProtectionGroupError>

source

pub fn delete_subscription(&self) -> DeleteSubscription

Constructs a fluent builder for the DeleteSubscription operation.

The fluent builder takes no input, just send it.
On success, responds with DeleteSubscriptionOutput
On failure, responds with SdkError<DeleteSubscriptionError>

source

pub fn describe_attack(&self) -> DescribeAttack

Constructs a fluent builder for the DescribeAttack operation.

The fluent builder is configurable:
- attack_id(impl Into<String>) / set_attack_id(Option<String>):
 The unique identifier (ID) for the attack.
On success, responds with DescribeAttackOutput with field(s):
- attack(Option<AttackDetail>):
 The attack that is described.
On failure, responds with SdkError<DescribeAttackError>

source

pub fn describe_attack_statistics(&self) -> DescribeAttackStatistics

Constructs a fluent builder for the DescribeAttackStatistics operation.

The fluent builder takes no input, just send it.
On success, responds with DescribeAttackStatisticsOutput with field(s):
- time_range(Option<TimeRange>):
 The time range.
- data_items(Option<Vec<AttackStatisticsDataItem>>):
 The data that describes the attacks detected during the time period.
On failure, responds with SdkError<DescribeAttackStatisticsError>

source

pub fn describe_drt_access(&self) -> DescribeDRTAccess

Constructs a fluent builder for the DescribeDRTAccess operation.

The fluent builder takes no input, just send it.
On success, responds with DescribeDrtAccessOutput with field(s):
- role_arn(Option<String>):
 The Amazon Resource Name (ARN) of the role the SRT used to access your Amazon Web Services account.
- log_bucket_list(Option<Vec<String>>):
 The list of Amazon S3 buckets accessed by the SRT.
On failure, responds with SdkError<DescribeDRTAccessError>

source

pub fn describe_emergency_contact_settings(
&self
) -> DescribeEmergencyContactSettings

Constructs a fluent builder for the DescribeEmergencyContactSettings operation.

The fluent builder takes no input, just send it.
On success, responds with DescribeEmergencyContactSettingsOutput with field(s):
- emergency_contact_list(Option<Vec<EmergencyContact>>):
 A list of email addresses and phone numbers that the Shield Response Team (SRT) can use to contact you if you have proactive engagement enabled, for escalations to the SRT and to initiate proactive customer support.
On failure, responds with SdkError<DescribeEmergencyContactSettingsError>

source

pub fn describe_protection(&self) -> DescribeProtection

Constructs a fluent builder for the DescribeProtection operation.

The fluent builder is configurable:
- protection_id(impl Into<String>) / set_protection_id(Option<String>):
 The unique identifier (ID) for the Protection object that is described. When submitting the DescribeProtection request you must provide either the ResourceArn or the ProtectionID, but not both.
- resource_arn(impl Into<String>) / set_resource_arn(Option<String>):
 The ARN (Amazon Resource Name) of the Amazon Web Services resource for the Protection object that is described. When submitting the DescribeProtection request you must provide either the ResourceArn or the ProtectionID, but not both.
On success, responds with DescribeProtectionOutput with field(s):
- protection(Option<Protection>):
 The Protection object that is described.
On failure, responds with SdkError<DescribeProtectionError>

source

pub fn describe_protection_group(&self) -> DescribeProtectionGroup

Constructs a fluent builder for the DescribeProtectionGroup operation.

The fluent builder is configurable:
- protection_group_id(impl Into<String>) / set_protection_group_id(Option<String>):
 The name of the protection group. You use this to identify the protection group in lists and to manage the protection group, for example to update, delete, or describe it.
On success, responds with DescribeProtectionGroupOutput with field(s):
- protection_group(Option<ProtectionGroup>):
 A grouping of protected resources that you and Shield Advanced can monitor as a collective. This resource grouping improves the accuracy of detection and reduces false positives.
On failure, responds with SdkError<DescribeProtectionGroupError>

source

pub fn describe_subscription(&self) -> DescribeSubscription

Constructs a fluent builder for the DescribeSubscription operation.

The fluent builder takes no input, just send it.
On success, responds with DescribeSubscriptionOutput with field(s):
- subscription(Option<Subscription>):
 The Shield Advanced subscription details for an account.
On failure, responds with SdkError<DescribeSubscriptionError>

source

pub fn disable_application_layer_automatic_response(
&self
) -> DisableApplicationLayerAutomaticResponse

Constructs a fluent builder for the DisableApplicationLayerAutomaticResponse operation.

The fluent builder is configurable:
- resource_arn(impl Into<String>) / set_resource_arn(Option<String>):
 The ARN (Amazon Resource Name) of the resource.
On success, responds with DisableApplicationLayerAutomaticResponseOutput
On failure, responds with SdkError<DisableApplicationLayerAutomaticResponseError>

source

pub fn disable_proactive_engagement(&self) -> DisableProactiveEngagement

Constructs a fluent builder for the DisableProactiveEngagement operation.

The fluent builder takes no input, just send it.
On success, responds with DisableProactiveEngagementOutput
On failure, responds with SdkError<DisableProactiveEngagementError>

source

pub fn disassociate_drt_log_bucket(&self) -> DisassociateDRTLogBucket

Constructs a fluent builder for the DisassociateDRTLogBucket operation.

The fluent builder is configurable:
- log_bucket(impl Into<String>) / set_log_bucket(Option<String>):
 The Amazon S3 bucket that contains the logs that you want to share.
On success, responds with DisassociateDrtLogBucketOutput
On failure, responds with SdkError<DisassociateDRTLogBucketError>

source

pub fn disassociate_drt_role(&self) -> DisassociateDRTRole

Constructs a fluent builder for the DisassociateDRTRole operation.

The fluent builder takes no input, just send it.
On success, responds with DisassociateDrtRoleOutput
On failure, responds with SdkError<DisassociateDRTRoleError>

source

pub fn disassociate_health_check(&self) -> DisassociateHealthCheck

Constructs a fluent builder for the DisassociateHealthCheck operation.

The fluent builder is configurable:
- protection_id(impl Into<String>) / set_protection_id(Option<String>):
 The unique identifier (ID) for the Protection object to remove the health check association from.
- health_check_arn(impl Into<String>) / set_health_check_arn(Option<String>):
 The Amazon Resource Name (ARN) of the health check that is associated with the protection.
On success, responds with DisassociateHealthCheckOutput
On failure, responds with SdkError<DisassociateHealthCheckError>

source

pub fn enable_application_layer_automatic_response(
&self
) -> EnableApplicationLayerAutomaticResponse

Constructs a fluent builder for the EnableApplicationLayerAutomaticResponse operation.

The fluent builder is configurable:
- resource_arn(impl Into<String>) / set_resource_arn(Option<String>):
 The ARN (Amazon Resource Name) of the resource.
- action(ResponseAction) / set_action(Option<ResponseAction>):
 Specifies the action setting that Shield Advanced should use in the WAF rules that it creates on behalf of the protected resource in response to DDoS attacks. You specify this as part of the configuration for the automatic application layer DDoS mitigation feature, when you enable or update automatic mitigation. Shield Advanced creates the WAF rules in a Shield Advanced-managed rule group, inside the web ACL that you have associated with the resource.
On success, responds with EnableApplicationLayerAutomaticResponseOutput
On failure, responds with SdkError<EnableApplicationLayerAutomaticResponseError>

source

pub fn enable_proactive_engagement(&self) -> EnableProactiveEngagement

Constructs a fluent builder for the EnableProactiveEngagement operation.

The fluent builder takes no input, just send it.
On success, responds with EnableProactiveEngagementOutput
On failure, responds with SdkError<EnableProactiveEngagementError>

source

pub fn get_subscription_state(&self) -> GetSubscriptionState

Constructs a fluent builder for the GetSubscriptionState operation.

The fluent builder takes no input, just send it.
On success, responds with GetSubscriptionStateOutput with field(s):
- subscription_state(Option<SubscriptionState>):
 The status of the subscription.
On failure, responds with SdkError<GetSubscriptionStateError>

source

pub fn list_attacks(&self) -> ListAttacks

Constructs a fluent builder for the ListAttacks operation. This operation supports pagination; See into_paginator().

The fluent builder is configurable:
- resource_arns(Vec<String>) / set_resource_arns(Option<Vec<String>>):
 The ARNs (Amazon Resource Names) of the resources that were attacked. If you leave this blank, all applicable resources for this account will be included.
- start_time(TimeRange) / set_start_time(Option<TimeRange>):
 The start of the time period for the attacks. This is a timestamp type. The request syntax listing for this call indicates a number type, but you can provide the time in any valid timestamp format setting.
- end_time(TimeRange) / set_end_time(Option<TimeRange>):
 The end of the time period for the attacks. This is a timestamp type. The request syntax listing for this call indicates a number type, but you can provide the time in any valid timestamp format setting.
- next_token(impl Into<String>) / set_next_token(Option<String>):
 When you request a list of objects from Shield Advanced, if the response does not include all of the remaining available objects, Shield Advanced includes a NextToken value in the response. You can retrieve the next batch of objects by requesting the list again and providing the token that was returned by the prior call in your request.
 
 You can indicate the maximum number of objects that you want Shield Advanced to return for a single call with the MaxResults setting. Shield Advanced will not return more than MaxResults objects, but may return fewer, even if more objects are still available.
 
 Whenever more objects remain that Shield Advanced has not yet returned to you, the response will include a NextToken value.
 
 On your first call to a list operation, leave this setting empty.
- max_results(i32) / set_max_results(Option<i32>):
 The greatest number of objects that you want Shield Advanced to return to the list request. Shield Advanced might return fewer objects than you indicate in this setting, even if more objects are available. If there are more objects remaining, Shield Advanced will always also return a NextToken value in the response.
 
 The default setting is 20.
On success, responds with ListAttacksOutput with field(s):
- attack_summaries(Option<Vec<AttackSummary>>):
 The attack information for the specified time range.
- next_token(Option<String>):
 When you request a list of objects from Shield Advanced, if the response does not include all of the remaining available objects, Shield Advanced includes a NextToken value in the response. You can retrieve the next batch of objects by requesting the list again and providing the token that was returned by the prior call in your request.
 
 You can indicate the maximum number of objects that you want Shield Advanced to return for a single call with the MaxResults setting. Shield Advanced will not return more than MaxResults objects, but may return fewer, even if more objects are still available.
 
 Whenever more objects remain that Shield Advanced has not yet returned to you, the response will include a NextToken value.
On failure, responds with SdkError<ListAttacksError>

source

pub fn list_protection_groups(&self) -> ListProtectionGroups

Constructs a fluent builder for the ListProtectionGroups operation. This operation supports pagination; See into_paginator().

The fluent builder is configurable:
- next_token(impl Into<String>) / set_next_token(Option<String>):
 When you request a list of objects from Shield Advanced, if the response does not include all of the remaining available objects, Shield Advanced includes a NextToken value in the response. You can retrieve the next batch of objects by requesting the list again and providing the token that was returned by the prior call in your request.
 
 You can indicate the maximum number of objects that you want Shield Advanced to return for a single call with the MaxResults setting. Shield Advanced will not return more than MaxResults objects, but may return fewer, even if more objects are still available.
 
 Whenever more objects remain that Shield Advanced has not yet returned to you, the response will include a NextToken value.
 
 On your first call to a list operation, leave this setting empty.
- max_results(i32) / set_max_results(Option<i32>):
 The greatest number of objects that you want Shield Advanced to return to the list request. Shield Advanced might return fewer objects than you indicate in this setting, even if more objects are available. If there are more objects remaining, Shield Advanced will always also return a NextToken value in the response.
 
 The default setting is 20.
On success, responds with ListProtectionGroupsOutput with field(s):
- protection_groups(Option<Vec<ProtectionGroup>>):
- next_token(Option<String>):
 When you request a list of objects from Shield Advanced, if the response does not include all of the remaining available objects, Shield Advanced includes a NextToken value in the response. You can retrieve the next batch of objects by requesting the list again and providing the token that was returned by the prior call in your request.
 
 You can indicate the maximum number of objects that you want Shield Advanced to return for a single call with the MaxResults setting. Shield Advanced will not return more than MaxResults objects, but may return fewer, even if more objects are still available.
 
 Whenever more objects remain that Shield Advanced has not yet returned to you, the response will include a NextToken value.
On failure, responds with SdkError<ListProtectionGroupsError>

source

pub fn list_protections(&self) -> ListProtections

Constructs a fluent builder for the ListProtections operation. This operation supports pagination; See into_paginator().

The fluent builder is configurable:
- next_token(impl Into<String>) / set_next_token(Option<String>):
 When you request a list of objects from Shield Advanced, if the response does not include all of the remaining available objects, Shield Advanced includes a NextToken value in the response. You can retrieve the next batch of objects by requesting the list again and providing the token that was returned by the prior call in your request.
 
 You can indicate the maximum number of objects that you want Shield Advanced to return for a single call with the MaxResults setting. Shield Advanced will not return more than MaxResults objects, but may return fewer, even if more objects are still available.
 
 Whenever more objects remain that Shield Advanced has not yet returned to you, the response will include a NextToken value.
 
 On your first call to a list operation, leave this setting empty.
- max_results(i32) / set_max_results(Option<i32>):
 The greatest number of objects that you want Shield Advanced to return to the list request. Shield Advanced might return fewer objects than you indicate in this setting, even if more objects are available. If there are more objects remaining, Shield Advanced will always also return a NextToken value in the response.
 
 The default setting is 20.
On success, responds with ListProtectionsOutput with field(s):
- protections(Option<Vec<Protection>>):
 The array of enabled Protection objects.
- next_token(Option<String>):
 When you request a list of objects from Shield Advanced, if the response does not include all of the remaining available objects, Shield Advanced includes a NextToken value in the response. You can retrieve the next batch of objects by requesting the list again and providing the token that was returned by the prior call in your request.
 
 You can indicate the maximum number of objects that you want Shield Advanced to return for a single call with the MaxResults setting. Shield Advanced will not return more than MaxResults objects, but may return fewer, even if more objects are still available.
 
 Whenever more objects remain that Shield Advanced has not yet returned to you, the response will include a NextToken value.
On failure, responds with SdkError<ListProtectionsError>

source

pub fn list_resources_in_protection_group(
&self
) -> ListResourcesInProtectionGroup

Constructs a fluent builder for the ListResourcesInProtectionGroup operation. This operation supports pagination; See into_paginator().

The fluent builder is configurable:
- protection_group_id(impl Into<String>) / set_protection_group_id(Option<String>):
 The name of the protection group. You use this to identify the protection group in lists and to manage the protection group, for example to update, delete, or describe it.
- next_token(impl Into<String>) / set_next_token(Option<String>):
 When you request a list of objects from Shield Advanced, if the response does not include all of the remaining available objects, Shield Advanced includes a NextToken value in the response. You can retrieve the next batch of objects by requesting the list again and providing the token that was returned by the prior call in your request.
 
 You can indicate the maximum number of objects that you want Shield Advanced to return for a single call with the MaxResults setting. Shield Advanced will not return more than MaxResults objects, but may return fewer, even if more objects are still available.
 
 Whenever more objects remain that Shield Advanced has not yet returned to you, the response will include a NextToken value.
 
 On your first call to a list operation, leave this setting empty.
- max_results(i32) / set_max_results(Option<i32>):
 The greatest number of objects that you want Shield Advanced to return to the list request. Shield Advanced might return fewer objects than you indicate in this setting, even if more objects are available. If there are more objects remaining, Shield Advanced will always also return a NextToken value in the response.
 
 The default setting is 20.
On success, responds with ListResourcesInProtectionGroupOutput with field(s):
- resource_arns(Option<Vec<String>>):
 The Amazon Resource Names (ARNs) of the resources that are included in the protection group.
- next_token(Option<String>):
 When you request a list of objects from Shield Advanced, if the response does not include all of the remaining available objects, Shield Advanced includes a NextToken value in the response. You can retrieve the next batch of objects by requesting the list again and providing the token that was returned by the prior call in your request.
 
 You can indicate the maximum number of objects that you want Shield Advanced to return for a single call with the MaxResults setting. Shield Advanced will not return more than MaxResults objects, but may return fewer, even if more objects are still available.
 
 Whenever more objects remain that Shield Advanced has not yet returned to you, the response will include a NextToken value.
On failure, responds with SdkError<ListResourcesInProtectionGroupError>

source

pub fn list_tags_for_resource(&self) -> ListTagsForResource

Constructs a fluent builder for the ListTagsForResource operation.

The fluent builder is configurable:
- resource_arn(impl Into<String>) / set_resource_arn(Option<String>):
 The Amazon Resource Name (ARN) of the resource to get tags for.
On success, responds with ListTagsForResourceOutput with field(s):
- tags(Option<Vec<Tag>>):
 A list of tag key and value pairs associated with the specified resource.
On failure, responds with SdkError<ListTagsForResourceError>

source

pub fn tag_resource(&self) -> TagResource

Constructs a fluent builder for the TagResource operation.

The fluent builder is configurable:
- resource_arn(impl Into<String>) / set_resource_arn(Option<String>):
 The Amazon Resource Name (ARN) of the resource that you want to add or update tags for.
- tags(Vec<Tag>) / set_tags(Option<Vec<Tag>>):
 The tags that you want to modify or add to the resource.
On success, responds with TagResourceOutput
On failure, responds with SdkError<TagResourceError>

source

pub fn untag_resource(&self) -> UntagResource

Constructs a fluent builder for the UntagResource operation.

The fluent builder is configurable:
- resource_arn(impl Into<String>) / set_resource_arn(Option<String>):
 The Amazon Resource Name (ARN) of the resource that you want to remove tags from.
- tag_keys(Vec<String>) / set_tag_keys(Option<Vec<String>>):
 The tag key for each tag that you want to remove from the resource.
On success, responds with UntagResourceOutput
On failure, responds with SdkError<UntagResourceError>

source

pub fn update_application_layer_automatic_response(
&self
) -> UpdateApplicationLayerAutomaticResponse

Constructs a fluent builder for the UpdateApplicationLayerAutomaticResponse operation.

The fluent builder is configurable:
- resource_arn(impl Into<String>) / set_resource_arn(Option<String>):
 The ARN (Amazon Resource Name) of the resource.
- action(ResponseAction) / set_action(Option<ResponseAction>):
 Specifies the action setting that Shield Advanced should use in the WAF rules that it creates on behalf of the protected resource in response to DDoS attacks. You specify this as part of the configuration for the automatic application layer DDoS mitigation feature, when you enable or update automatic mitigation. Shield Advanced creates the WAF rules in a Shield Advanced-managed rule group, inside the web ACL that you have associated with the resource.
On success, responds with UpdateApplicationLayerAutomaticResponseOutput
On failure, responds with SdkError<UpdateApplicationLayerAutomaticResponseError>

source

pub fn update_emergency_contact_settings(
&self
) -> UpdateEmergencyContactSettings

Constructs a fluent builder for the UpdateEmergencyContactSettings operation.

The fluent builder is configurable:
- emergency_contact_list(Vec<EmergencyContact>) / set_emergency_contact_list(Option<Vec<EmergencyContact>>):
 A list of email addresses and phone numbers that the Shield Response Team (SRT) can use to contact you if you have proactive engagement enabled, for escalations to the SRT and to initiate proactive customer support.
 
 If you have proactive engagement enabled, the contact list must include at least one phone number.
On success, responds with UpdateEmergencyContactSettingsOutput
On failure, responds with SdkError<UpdateEmergencyContactSettingsError>

source

pub fn update_protection_group(&self) -> UpdateProtectionGroup

Constructs a fluent builder for the UpdateProtectionGroup operation.

The fluent builder is configurable:
- protection_group_id(impl Into<String>) / set_protection_group_id(Option<String>):
 The name of the protection group. You use this to identify the protection group in lists and to manage the protection group, for example to update, delete, or describe it.
- aggregation(ProtectionGroupAggregation) / set_aggregation(Option<ProtectionGroupAggregation>):
 Defines how Shield combines resource data for the group in order to detect, mitigate, and report events.
 - Sum - Use the total traffic across the group. This is a good choice for most cases. Examples include Elastic IP addresses for EC2 instances that scale manually or automatically.
 - Mean - Use the average of the traffic across the group. This is a good choice for resources that share traffic uniformly. Examples include accelerators and load balancers.
 - Max - Use the highest traffic from each resource. This is useful for resources that don’t share traffic and for resources that share that traffic in a non-uniform way. Examples include Amazon CloudFront distributions and origin resources for CloudFront distributions.
- pattern(ProtectionGroupPattern) / set_pattern(Option<ProtectionGroupPattern>):
 The criteria to use to choose the protected resources for inclusion in the group. You can include all resources that have protections, provide a list of resource Amazon Resource Names (ARNs), or include all resources of a specified resource type.
- resource_type(ProtectedResourceType) / set_resource_type(Option<ProtectedResourceType>):
 The resource type to include in the protection group. All protected resources of this type are included in the protection group. You must set this when you set Pattern to BY_RESOURCE_TYPE and you must not set it for any other Pattern setting.
- members(Vec<String>) / set_members(Option<Vec<String>>):
 The Amazon Resource Names (ARNs) of the resources to include in the protection group. You must set this when you set Pattern to ARBITRARY and you must not set it for any other Pattern setting.
On success, responds with UpdateProtectionGroupOutput
On failure, responds with SdkError<UpdateProtectionGroupError>

source

pub fn update_subscription(&self) -> UpdateSubscription

Constructs a fluent builder for the UpdateSubscription operation.

The fluent builder is configurable:
- auto_renew(AutoRenew) / set_auto_renew(Option<AutoRenew>):
 When you initally create a subscription, AutoRenew is set to ENABLED. If ENABLED, the subscription will be automatically renewed at the end of the existing subscription period. You can change this by submitting an UpdateSubscription request. If the UpdateSubscription request does not included a value for AutoRenew, the existing value for AutoRenew remains unchanged.
On success, responds with UpdateSubscriptionOutput
On failure, responds with SdkError<UpdateSubscriptionError>