Struct aws_sdk_ses::input::SendRawEmailInput
source · [−]#[non_exhaustive]pub struct SendRawEmailInput {
pub source: Option<String>,
pub destinations: Option<Vec<String>>,
pub raw_message: Option<RawMessage>,
pub from_arn: Option<String>,
pub source_arn: Option<String>,
pub return_path_arn: Option<String>,
pub tags: Option<Vec<MessageTag>>,
pub configuration_set_name: Option<String>,
}
Expand description
Represents a request to send a single raw email using Amazon SES. For more information, see the Amazon SES Developer Guide.
Fields (Non-exhaustive)
This struct is marked as non-exhaustive
Struct { .. }
syntax; cannot be matched against without a wildcard ..
; and struct update syntax will not work.source: Option<String>
The identity's email address. If you do not provide a value for this parameter, you must specify a "From" address in the raw text of the message. (You can also specify both.)
Amazon SES does not support the SMTPUTF8 extension, as described inRFC6531. For this reason, the local part of a source email address (the part of the email address that precedes the @ sign) may only contain 7-bit ASCII characters. If the domain part of an address (the part after the @ sign) contains non-ASCII characters, they must be encoded using Punycode, as described in RFC3492. The sender name (also known as the friendly name) may contain non-ASCII characters. These characters must be encoded using MIME encoded-word syntax, as described in RFC 2047. MIME encoded-word syntax uses the following form: =?charset?encoding?encoded-text?=
.
If you specify the Source
parameter and have feedback forwarding enabled, then bounces and complaints will be sent to this email address. This takes precedence over any Return-Path header that you might include in the raw text of the message.
destinations: Option<Vec<String>>
A list of destinations for the message, consisting of To:, CC:, and BCC: addresses.
raw_message: Option<RawMessage>
The raw email message itself. The message has to meet the following criteria:
-
The message has to contain a header and a body, separated by a blank line.
-
All of the required header fields must be present in the message.
-
Each part of a multipart MIME message must be formatted properly.
-
Attachments must be of a content type that Amazon SES supports. For a list on unsupported content types, see Unsupported Attachment Types in the Amazon SES Developer Guide.
-
The entire message must be base64-encoded.
-
If any of the MIME parts in your message contain content that is outside of the 7-bit ASCII character range, we highly recommend that you encode that content. For more information, see Sending Raw Email in the Amazon SES Developer Guide.
-
Per RFC 5321, the maximum length of each line of text, including the
, must not exceed 1,000 characters.
from_arn: Option<String>
This parameter is used only for sending authorization. It is the ARN of the identity that is associated with the sending authorization policy that permits you to specify a particular "From" address in the header of the raw email.
Instead of using this parameter, you can use the X-header X-SES-FROM-ARN
in the raw message of the email. If you use both the FromArn
parameter and the corresponding X-header, Amazon SES uses the value of the FromArn
parameter.
For information about when to use this parameter, see the description of SendRawEmail
in this guide, or see the Amazon SES Developer Guide.
source_arn: Option<String>
This parameter is used only for sending authorization. It is the ARN of the identity that is associated with the sending authorization policy that permits you to send for the email address specified in the Source
parameter.
For example, if the owner of example.com
(which has ARN arn:aws:ses:us-east-1:123456789012:identity/example.com
) attaches a policy to it that authorizes you to send from user@example.com
, then you would specify the SourceArn
to be arn:aws:ses:us-east-1:123456789012:identity/example.com
, and the Source
to be user@example.com
.
Instead of using this parameter, you can use the X-header X-SES-SOURCE-ARN
in the raw message of the email. If you use both the SourceArn
parameter and the corresponding X-header, Amazon SES uses the value of the SourceArn
parameter.
For information about when to use this parameter, see the description of SendRawEmail
in this guide, or see the Amazon SES Developer Guide.
return_path_arn: Option<String>
This parameter is used only for sending authorization. It is the ARN of the identity that is associated with the sending authorization policy that permits you to use the email address specified in the ReturnPath
parameter.
For example, if the owner of example.com
(which has ARN arn:aws:ses:us-east-1:123456789012:identity/example.com
) attaches a policy to it that authorizes you to use feedback@example.com
, then you would specify the ReturnPathArn
to be arn:aws:ses:us-east-1:123456789012:identity/example.com
, and the ReturnPath
to be feedback@example.com
.
Instead of using this parameter, you can use the X-header X-SES-RETURN-PATH-ARN
in the raw message of the email. If you use both the ReturnPathArn
parameter and the corresponding X-header, Amazon SES uses the value of the ReturnPathArn
parameter.
For information about when to use this parameter, see the description of SendRawEmail
in this guide, or see the Amazon SES Developer Guide.
A list of tags, in the form of name/value pairs, to apply to an email that you send using SendRawEmail
. Tags correspond to characteristics of the email that you define, so that you can publish email sending events.
configuration_set_name: Option<String>
The name of the configuration set to use when you send an email using SendRawEmail
.
Implementations
sourceimpl SendRawEmailInput
impl SendRawEmailInput
sourcepub async fn make_operation(
&self,
_config: &Config
) -> Result<Operation<SendRawEmail, AwsErrorRetryPolicy>, BuildError>
pub async fn make_operation(
&self,
_config: &Config
) -> Result<Operation<SendRawEmail, AwsErrorRetryPolicy>, BuildError>
Consumes the builder and constructs an Operation<SendRawEmail
>
sourcepub fn builder() -> Builder
pub fn builder() -> Builder
Creates a new builder-style object to manufacture SendRawEmailInput
sourceimpl SendRawEmailInput
impl SendRawEmailInput
sourcepub fn source(&self) -> Option<&str>
pub fn source(&self) -> Option<&str>
The identity's email address. If you do not provide a value for this parameter, you must specify a "From" address in the raw text of the message. (You can also specify both.)
Amazon SES does not support the SMTPUTF8 extension, as described inRFC6531. For this reason, the local part of a source email address (the part of the email address that precedes the @ sign) may only contain 7-bit ASCII characters. If the domain part of an address (the part after the @ sign) contains non-ASCII characters, they must be encoded using Punycode, as described in RFC3492. The sender name (also known as the friendly name) may contain non-ASCII characters. These characters must be encoded using MIME encoded-word syntax, as described in RFC 2047. MIME encoded-word syntax uses the following form: =?charset?encoding?encoded-text?=
.
If you specify the Source
parameter and have feedback forwarding enabled, then bounces and complaints will be sent to this email address. This takes precedence over any Return-Path header that you might include in the raw text of the message.
sourcepub fn destinations(&self) -> Option<&[String]>
pub fn destinations(&self) -> Option<&[String]>
A list of destinations for the message, consisting of To:, CC:, and BCC: addresses.
sourcepub fn raw_message(&self) -> Option<&RawMessage>
pub fn raw_message(&self) -> Option<&RawMessage>
The raw email message itself. The message has to meet the following criteria:
-
The message has to contain a header and a body, separated by a blank line.
-
All of the required header fields must be present in the message.
-
Each part of a multipart MIME message must be formatted properly.
-
Attachments must be of a content type that Amazon SES supports. For a list on unsupported content types, see Unsupported Attachment Types in the Amazon SES Developer Guide.
-
The entire message must be base64-encoded.
-
If any of the MIME parts in your message contain content that is outside of the 7-bit ASCII character range, we highly recommend that you encode that content. For more information, see Sending Raw Email in the Amazon SES Developer Guide.
-
Per RFC 5321, the maximum length of each line of text, including the
, must not exceed 1,000 characters.
sourcepub fn from_arn(&self) -> Option<&str>
pub fn from_arn(&self) -> Option<&str>
This parameter is used only for sending authorization. It is the ARN of the identity that is associated with the sending authorization policy that permits you to specify a particular "From" address in the header of the raw email.
Instead of using this parameter, you can use the X-header X-SES-FROM-ARN
in the raw message of the email. If you use both the FromArn
parameter and the corresponding X-header, Amazon SES uses the value of the FromArn
parameter.
For information about when to use this parameter, see the description of SendRawEmail
in this guide, or see the Amazon SES Developer Guide.
sourcepub fn source_arn(&self) -> Option<&str>
pub fn source_arn(&self) -> Option<&str>
This parameter is used only for sending authorization. It is the ARN of the identity that is associated with the sending authorization policy that permits you to send for the email address specified in the Source
parameter.
For example, if the owner of example.com
(which has ARN arn:aws:ses:us-east-1:123456789012:identity/example.com
) attaches a policy to it that authorizes you to send from user@example.com
, then you would specify the SourceArn
to be arn:aws:ses:us-east-1:123456789012:identity/example.com
, and the Source
to be user@example.com
.
Instead of using this parameter, you can use the X-header X-SES-SOURCE-ARN
in the raw message of the email. If you use both the SourceArn
parameter and the corresponding X-header, Amazon SES uses the value of the SourceArn
parameter.
For information about when to use this parameter, see the description of SendRawEmail
in this guide, or see the Amazon SES Developer Guide.
sourcepub fn return_path_arn(&self) -> Option<&str>
pub fn return_path_arn(&self) -> Option<&str>
This parameter is used only for sending authorization. It is the ARN of the identity that is associated with the sending authorization policy that permits you to use the email address specified in the ReturnPath
parameter.
For example, if the owner of example.com
(which has ARN arn:aws:ses:us-east-1:123456789012:identity/example.com
) attaches a policy to it that authorizes you to use feedback@example.com
, then you would specify the ReturnPathArn
to be arn:aws:ses:us-east-1:123456789012:identity/example.com
, and the ReturnPath
to be feedback@example.com
.
Instead of using this parameter, you can use the X-header X-SES-RETURN-PATH-ARN
in the raw message of the email. If you use both the ReturnPathArn
parameter and the corresponding X-header, Amazon SES uses the value of the ReturnPathArn
parameter.
For information about when to use this parameter, see the description of SendRawEmail
in this guide, or see the Amazon SES Developer Guide.
A list of tags, in the form of name/value pairs, to apply to an email that you send using SendRawEmail
. Tags correspond to characteristics of the email that you define, so that you can publish email sending events.
sourcepub fn configuration_set_name(&self) -> Option<&str>
pub fn configuration_set_name(&self) -> Option<&str>
The name of the configuration set to use when you send an email using SendRawEmail
.
Trait Implementations
sourceimpl Clone for SendRawEmailInput
impl Clone for SendRawEmailInput
sourcefn clone(&self) -> SendRawEmailInput
fn clone(&self) -> SendRawEmailInput
Returns a copy of the value. Read more
1.0.0 · sourcefn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
Performs copy-assignment from source
. Read more
sourceimpl Debug for SendRawEmailInput
impl Debug for SendRawEmailInput
sourceimpl PartialEq<SendRawEmailInput> for SendRawEmailInput
impl PartialEq<SendRawEmailInput> for SendRawEmailInput
sourcefn eq(&self, other: &SendRawEmailInput) -> bool
fn eq(&self, other: &SendRawEmailInput) -> bool
This method tests for self
and other
values to be equal, and is used
by ==
. Read more
sourcefn ne(&self, other: &SendRawEmailInput) -> bool
fn ne(&self, other: &SendRawEmailInput) -> bool
This method tests for !=
.
impl StructuralPartialEq for SendRawEmailInput
Auto Trait Implementations
impl RefUnwindSafe for SendRawEmailInput
impl Send for SendRawEmailInput
impl Sync for SendRawEmailInput
impl Unpin for SendRawEmailInput
impl UnwindSafe for SendRawEmailInput
Blanket Implementations
sourceimpl<T> BorrowMut<T> for T where
T: ?Sized,
impl<T> BorrowMut<T> for T where
T: ?Sized,
const: unstable · sourcefn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Mutably borrows from an owned value. Read more
sourceimpl<T> Instrument for T
impl<T> Instrument for T
sourcefn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
sourcefn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
sourceimpl<T> ToOwned for T where
T: Clone,
impl<T> ToOwned for T where
T: Clone,
type Owned = T
type Owned = T
The resulting type after obtaining ownership.
sourcefn clone_into(&self, target: &mut T)
fn clone_into(&self, target: &mut T)
toowned_clone_into
)Uses borrowed data to replace owned data, usually by cloning. Read more
sourceimpl<T> WithSubscriber for T
impl<T> WithSubscriber for T
sourcefn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self> where
S: Into<Dispatch>,
fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self> where
S: Into<Dispatch>,
Attaches the provided Subscriber
to this type, returning a
WithDispatch
wrapper. Read more
sourcefn with_current_subscriber(self) -> WithDispatch<Self>
fn with_current_subscriber(self) -> WithDispatch<Self>
Attaches the current default Subscriber
to this type, returning a
WithDispatch
wrapper. Read more