Struct aws_sdk_route53domains::client::fluent_builders::RegisterDomain

pub struct RegisterDomain<C = DynConnector, M = AwsMiddleware, R = Standard> { /* fields omitted */ }

Fluent builder constructing a request to RegisterDomain.

This operation registers a domain. Domains are registered either by Amazon Registrar (for .com, .net, and .org domains) or by our registrar associate, Gandi (for all other domains). For some top-level domains (TLDs), this operation requires extra parameters.

When you register a domain, Amazon Route 53 does the following:

• Creates a Route 53 hosted zone that has the same name as the domain. Route 53 assigns four name servers to your hosted zone and automatically updates your domain registration with the names of these name servers.

• Enables autorenew, so your domain registration will renew automatically each year. We'll notify you in advance of the renewal date so you can choose whether to renew the registration.

• Optionally enables privacy protection, so WHOIS queries return contact information either for Amazon Registrar (for .com, .net, and .org domains) or for our registrar associate, Gandi (for all other TLDs). If you don't enable privacy protection, WHOIS queries return the information that you entered for the registrant, admin, and tech contacts.

• If registration is successful, returns an operation ID that you can use to track the progress and completion of the action. If the request is not completed successfully, the domain registrant is notified by email.

• Charges your AWS account an amount based on the top-level domain. For more information, see Amazon Route 53 Pricing.

Implementations

impl<C, M, R> RegisterDomain<C, M, R> where
    C: SmithyConnector,
    M: SmithyMiddleware<C>,
    R: NewRequestPolicy, 

pub async fn send(
    self
) -> Result<RegisterDomainOutput, SdkError<RegisterDomainError>> where
    R::Policy: SmithyRetryPolicy<RegisterDomainInputOperationOutputAlias, RegisterDomainOutput, RegisterDomainError, RegisterDomainInputOperationRetryAlias>, 

Sends the request and returns the response.

If an error occurs, an SdkError will be returned with additional details that can be matched against.

By default, any retryable failures will be retried twice. Retry behavior is configurable with the RetryConfig, which can be set when configuring the client.

pub fn domain_name(self, inp: impl Into<String>) -> Self

The domain name that you want to register. The top-level domain (TLD), such as .com, must be a TLD that Route 53 supports. For a list of supported TLDs, see Domains that You Can Register with Amazon Route 53 in the Amazon Route 53 Developer Guide.

The domain name can contain only the following characters:

• Letters a through z. Domain names are not case sensitive.

• Numbers 0 through 9.

• Hyphen (-). You can't specify a hyphen at the beginning or end of a label.

• Period (.) to separate the labels in the name, such as the . in example.com.

Internationalized domain names are not supported for some top-level domains. To determine whether the TLD that you want to use supports internationalized domain names, see Domains that You Can Register with Amazon Route 53. For more information, see Formatting Internationalized Domain Names.

pub fn set_domain_name(self, input: Option<String>) -> Self

The domain name that you want to register. The top-level domain (TLD), such as .com, must be a TLD that Route 53 supports. For a list of supported TLDs, see Domains that You Can Register with Amazon Route 53 in the Amazon Route 53 Developer Guide.

The domain name can contain only the following characters:

• Letters a through z. Domain names are not case sensitive.

• Numbers 0 through 9.

• Hyphen (-). You can't specify a hyphen at the beginning or end of a label.

• Period (.) to separate the labels in the name, such as the . in example.com.

Internationalized domain names are not supported for some top-level domains. To determine whether the TLD that you want to use supports internationalized domain names, see Domains that You Can Register with Amazon Route 53. For more information, see Formatting Internationalized Domain Names.

pub fn idn_lang_code(self, inp: impl Into<String>) -> Self

Reserved for future use.

pub fn set_idn_lang_code(self, input: Option<String>) -> Self

Reserved for future use.

pub fn duration_in_years(self, inp: i32) -> Self

The number of years that you want to register the domain for. Domains are registered for a minimum of one year. The maximum period depends on the top-level domain. For the range of valid values for your domain, see Domains that You Can Register with Amazon Route 53 in the Amazon Route 53 Developer Guide.

Default: 1

pub fn set_duration_in_years(self, input: Option<i32>) -> Self

The number of years that you want to register the domain for. Domains are registered for a minimum of one year. The maximum period depends on the top-level domain. For the range of valid values for your domain, see Domains that You Can Register with Amazon Route 53 in the Amazon Route 53 Developer Guide.

Default: 1

pub fn auto_renew(self, inp: bool) -> Self

Indicates whether the domain will be automatically renewed (true) or not (false). Autorenewal only takes effect after the account is charged.

Default: true

pub fn set_auto_renew(self, input: Option<bool>) -> Self

Indicates whether the domain will be automatically renewed (true) or not (false). Autorenewal only takes effect after the account is charged.

Default: true

pub fn admin_contact(self, inp: ContactDetail) -> Self

Provides detailed contact information. For information about the values that you specify for each element, see ContactDetail.

pub fn set_admin_contact(self, input: Option<ContactDetail>) -> Self

Provides detailed contact information. For information about the values that you specify for each element, see ContactDetail.

pub fn registrant_contact(self, inp: ContactDetail) -> Self

Provides detailed contact information. For information about the values that you specify for each element, see ContactDetail.

pub fn set_registrant_contact(self, input: Option<ContactDetail>) -> Self

Provides detailed contact information. For information about the values that you specify for each element, see ContactDetail.

pub fn tech_contact(self, inp: ContactDetail) -> Self

Provides detailed contact information. For information about the values that you specify for each element, see ContactDetail.

pub fn set_tech_contact(self, input: Option<ContactDetail>) -> Self

Provides detailed contact information. For information about the values that you specify for each element, see ContactDetail.

pub fn privacy_protect_admin_contact(self, inp: bool) -> Self

Whether you want to conceal contact information from WHOIS queries. If you specify true, WHOIS ("who is") queries return contact information either for Amazon Registrar (for .com, .net, and .org domains) or for our registrar associate, Gandi (for all other TLDs). If you specify false, WHOIS queries return the information that you entered for the admin contact.

Default: true

pub fn set_privacy_protect_admin_contact(self, input: Option<bool>) -> Self

Whether you want to conceal contact information from WHOIS queries. If you specify true, WHOIS ("who is") queries return contact information either for Amazon Registrar (for .com, .net, and .org domains) or for our registrar associate, Gandi (for all other TLDs). If you specify false, WHOIS queries return the information that you entered for the admin contact.

Default: true

pub fn privacy_protect_registrant_contact(self, inp: bool) -> Self

Whether you want to conceal contact information from WHOIS queries. If you specify true, WHOIS ("who is") queries return contact information either for Amazon Registrar (for .com, .net, and .org domains) or for our registrar associate, Gandi (for all other TLDs). If you specify false, WHOIS queries return the information that you entered for the registrant contact (the domain owner).

Default: true

pub fn set_privacy_protect_registrant_contact(self, input: Option<bool>) -> Self

Whether you want to conceal contact information from WHOIS queries. If you specify true, WHOIS ("who is") queries return contact information either for Amazon Registrar (for .com, .net, and .org domains) or for our registrar associate, Gandi (for all other TLDs). If you specify false, WHOIS queries return the information that you entered for the registrant contact (the domain owner).

Default: true

pub fn privacy_protect_tech_contact(self, inp: bool) -> Self

Whether you want to conceal contact information from WHOIS queries. If you specify true, WHOIS ("who is") queries return contact information either for Amazon Registrar (for .com, .net, and .org domains) or for our registrar associate, Gandi (for all other TLDs). If you specify false, WHOIS queries return the information that you entered for the technical contact.

Default: true

pub fn set_privacy_protect_tech_contact(self, input: Option<bool>) -> Self

Whether you want to conceal contact information from WHOIS queries. If you specify true, WHOIS ("who is") queries return contact information either for Amazon Registrar (for .com, .net, and .org domains) or for our registrar associate, Gandi (for all other TLDs). If you specify false, WHOIS queries return the information that you entered for the technical contact.

Default: true

Trait Implementations

impl<C: Debug, M: Debug, R: Debug> Debug for RegisterDomain<C, M, R>

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.