// Code generated by software.amazon.smithy.rust.codegen.smithy-rs. DO NOT EDIT.
#[derive(Debug)]
pub(crate) struct Handle {
    pub(crate) client: aws_smithy_client::Client<
        aws_smithy_client::erase::DynConnector,
        aws_smithy_client::erase::DynMiddleware<aws_smithy_client::erase::DynConnector>,
    >,
    pub(crate) conf: crate::Config,
}

/// Client for Amazon Recycle Bin
///
/// Client for invoking operations on Amazon Recycle Bin. Each operation on Amazon Recycle Bin is a method on this
/// this struct. `.send()` MUST be invoked on the generated operations to dispatch the request to the service.
///
/// # Examples
/// **Constructing a client and invoking an operation**
/// ```rust,no_run
/// # async fn docs() {
///     // create a shared configuration. This can be used & shared between multiple service clients.
///     let shared_config = aws_config::load_from_env().await;
///     let client = aws_sdk_rbin::Client::new(&shared_config);
///     // invoke an operation
///     /* let rsp = client
///         .<operation_name>().
///         .<param>("some value")
///         .send().await; */
/// # }
/// ```
/// **Constructing a client with custom configuration**
/// ```rust,no_run
/// use aws_config::RetryConfig;
/// # async fn docs() {
/// let shared_config = aws_config::load_from_env().await;
/// let config = aws_sdk_rbin::config::Builder::from(&shared_config)
///   .retry_config(RetryConfig::disabled())
///   .build();
/// let client = aws_sdk_rbin::Client::from_conf(config);
/// # }
#[derive(std::fmt::Debug)]
pub struct Client {
    handle: std::sync::Arc<Handle>,
}

impl std::clone::Clone for Client {
    fn clone(&self) -> Self {
        Self {
            handle: self.handle.clone(),
        }
    }
}

#[doc(inline)]
pub use aws_smithy_client::Builder;

impl
    From<
        aws_smithy_client::Client<
            aws_smithy_client::erase::DynConnector,
            aws_smithy_client::erase::DynMiddleware<aws_smithy_client::erase::DynConnector>,
        >,
    > for Client
{
    fn from(
        client: aws_smithy_client::Client<
            aws_smithy_client::erase::DynConnector,
            aws_smithy_client::erase::DynMiddleware<aws_smithy_client::erase::DynConnector>,
        >,
    ) -> Self {
        Self::with_config(client, crate::Config::builder().build())
    }
}

impl Client {
    /// Creates a client with the given service configuration.
    pub fn with_config(
        client: aws_smithy_client::Client<
            aws_smithy_client::erase::DynConnector,
            aws_smithy_client::erase::DynMiddleware<aws_smithy_client::erase::DynConnector>,
        >,
        conf: crate::Config,
    ) -> Self {
        Self {
            handle: std::sync::Arc::new(Handle { client, conf }),
        }
    }

    /// Returns the client's configuration.
    pub fn conf(&self) -> &crate::Config {
        &self.handle.conf
    }
}
impl Client {
    /// Constructs a fluent builder for the [`CreateRule`](crate::client::fluent_builders::CreateRule) operation.
    ///
    /// - The fluent builder is configurable:
    ///   - [`retention_period(RetentionPeriod)`](crate::client::fluent_builders::CreateRule::retention_period) / [`set_retention_period(Option<RetentionPeriod>)`](crate::client::fluent_builders::CreateRule::set_retention_period): <p>Information about the retention period for which the retention rule is to retain resources.</p>
    ///   - [`description(impl Into<String>)`](crate::client::fluent_builders::CreateRule::description) / [`set_description(Option<String>)`](crate::client::fluent_builders::CreateRule::set_description): <p>The retention rule description.</p>
    ///   - [`tags(Vec<Tag>)`](crate::client::fluent_builders::CreateRule::tags) / [`set_tags(Option<Vec<Tag>>)`](crate::client::fluent_builders::CreateRule::set_tags): <p>Information about the tags to assign to the retention rule.</p>
    ///   - [`resource_type(ResourceType)`](crate::client::fluent_builders::CreateRule::resource_type) / [`set_resource_type(Option<ResourceType>)`](crate::client::fluent_builders::CreateRule::set_resource_type): <p>The resource type to be retained by the retention rule. Currently, only Amazon EBS snapshots and EBS-backed AMIs are supported. To retain snapshots, specify <code>EBS_SNAPSHOT</code>. To retain EBS-backed AMIs, specify <code>EC2_IMAGE</code>.</p>
    ///   - [`resource_tags(Vec<ResourceTag>)`](crate::client::fluent_builders::CreateRule::resource_tags) / [`set_resource_tags(Option<Vec<ResourceTag>>)`](crate::client::fluent_builders::CreateRule::set_resource_tags): <p>Specifies the resource tags to use to identify resources that are to be retained by a tag-level retention rule. For tag-level retention rules, only deleted resources, of the specified resource type, that have one or more of the specified tag key and value pairs are retained. If a resource is deleted, but it does not have any of the specified tag key and value pairs, it is immediately deleted without being retained by the retention rule.</p>  <p>You can add the same tag key and value pair to a maximum or five retention rules.</p>  <p>To create a Region-level retention rule, omit this parameter. A Region-level retention rule does not have any resource tags specified. It retains all deleted resources of the specified resource type in the Region in which the rule is created, even if the resources are not tagged.</p>
    /// - On success, responds with [`CreateRuleOutput`](crate::output::CreateRuleOutput) with field(s):
    ///   - [`identifier(Option<String>)`](crate::output::CreateRuleOutput::identifier): <p>The unique ID of the retention rule.</p>
    ///   - [`retention_period(Option<RetentionPeriod>)`](crate::output::CreateRuleOutput::retention_period): <p>Information about the retention period for which the retention rule is to retain resources.</p>
    ///   - [`description(Option<String>)`](crate::output::CreateRuleOutput::description): <p>The retention rule description.</p>
    ///   - [`tags(Option<Vec<Tag>>)`](crate::output::CreateRuleOutput::tags): <p>Information about the tags assigned to the retention rule.</p>
    ///   - [`resource_type(Option<ResourceType>)`](crate::output::CreateRuleOutput::resource_type): <p>The resource type retained by the retention rule.</p>
    ///   - [`resource_tags(Option<Vec<ResourceTag>>)`](crate::output::CreateRuleOutput::resource_tags): <p>Information about the resource tags used to identify resources that are retained by the retention rule.</p>
    ///   - [`status(Option<RuleStatus>)`](crate::output::CreateRuleOutput::status): <p>The state of the retention rule. Only retention rules that are in the <code>available</code> state retain resources.</p>
    /// - On failure, responds with [`SdkError<CreateRuleError>`](crate::error::CreateRuleError)
    pub fn create_rule(&self) -> fluent_builders::CreateRule {
        fluent_builders::CreateRule::new(self.handle.clone())
    }
    /// Constructs a fluent builder for the [`DeleteRule`](crate::client::fluent_builders::DeleteRule) operation.
    ///
    /// - The fluent builder is configurable:
    ///   - [`identifier(impl Into<String>)`](crate::client::fluent_builders::DeleteRule::identifier) / [`set_identifier(Option<String>)`](crate::client::fluent_builders::DeleteRule::set_identifier): <p>The unique ID of the retention rule.</p>
    /// - On success, responds with [`DeleteRuleOutput`](crate::output::DeleteRuleOutput)

    /// - On failure, responds with [`SdkError<DeleteRuleError>`](crate::error::DeleteRuleError)
    pub fn delete_rule(&self) -> fluent_builders::DeleteRule {
        fluent_builders::DeleteRule::new(self.handle.clone())
    }
    /// Constructs a fluent builder for the [`GetRule`](crate::client::fluent_builders::GetRule) operation.
    ///
    /// - The fluent builder is configurable:
    ///   - [`identifier(impl Into<String>)`](crate::client::fluent_builders::GetRule::identifier) / [`set_identifier(Option<String>)`](crate::client::fluent_builders::GetRule::set_identifier): <p>The unique ID of the retention rule.</p>
    /// - On success, responds with [`GetRuleOutput`](crate::output::GetRuleOutput) with field(s):
    ///   - [`identifier(Option<String>)`](crate::output::GetRuleOutput::identifier): <p>The unique ID of the retention rule.</p>
    ///   - [`description(Option<String>)`](crate::output::GetRuleOutput::description): <p>The retention rule description.</p>
    ///   - [`resource_type(Option<ResourceType>)`](crate::output::GetRuleOutput::resource_type): <p>The resource type retained by the retention rule.</p>
    ///   - [`retention_period(Option<RetentionPeriod>)`](crate::output::GetRuleOutput::retention_period): <p>Information about the retention period for which the retention rule is to retain resources.</p>
    ///   - [`resource_tags(Option<Vec<ResourceTag>>)`](crate::output::GetRuleOutput::resource_tags): <p>Information about the resource tags used to identify resources that are retained by the retention rule.</p>
    ///   - [`status(Option<RuleStatus>)`](crate::output::GetRuleOutput::status): <p>The state of the retention rule. Only retention rules that are in the <code>available</code> state retain resources.</p>
    /// - On failure, responds with [`SdkError<GetRuleError>`](crate::error::GetRuleError)
    pub fn get_rule(&self) -> fluent_builders::GetRule {
        fluent_builders::GetRule::new(self.handle.clone())
    }
    /// Constructs a fluent builder for the [`ListRules`](crate::client::fluent_builders::ListRules) operation.
    /// This operation supports pagination; See [`into_paginator()`](crate::client::fluent_builders::ListRules::into_paginator).
    ///
    /// - The fluent builder is configurable:
    ///   - [`max_results(i32)`](crate::client::fluent_builders::ListRules::max_results) / [`set_max_results(Option<i32>)`](crate::client::fluent_builders::ListRules::set_max_results): <p>The maximum number of results to return with a single call. To retrieve the remaining results, make another call with the returned <code>NextToken</code> value.</p>
    ///   - [`next_token(impl Into<String>)`](crate::client::fluent_builders::ListRules::next_token) / [`set_next_token(Option<String>)`](crate::client::fluent_builders::ListRules::set_next_token): <p>The token for the next page of results.</p>
    ///   - [`resource_type(ResourceType)`](crate::client::fluent_builders::ListRules::resource_type) / [`set_resource_type(Option<ResourceType>)`](crate::client::fluent_builders::ListRules::set_resource_type): <p>The resource type retained by the retention rule. Only retention rules that retain the specified resource type are listed. Currently, only Amazon EBS snapshots and EBS-backed AMIs are supported. To list retention rules that retain snapshots, specify <code>EBS_SNAPSHOT</code>. To list retention rules that retain EBS-backed AMIs, specify <code>EC2_IMAGE</code>.</p>
    ///   - [`resource_tags(Vec<ResourceTag>)`](crate::client::fluent_builders::ListRules::resource_tags) / [`set_resource_tags(Option<Vec<ResourceTag>>)`](crate::client::fluent_builders::ListRules::set_resource_tags): <p>Information about the resource tags used to identify resources that are retained by the retention rule.</p>
    /// - On success, responds with [`ListRulesOutput`](crate::output::ListRulesOutput) with field(s):
    ///   - [`rules(Option<Vec<RuleSummary>>)`](crate::output::ListRulesOutput::rules): <p>Information about the retention rules.</p>
    ///   - [`next_token(Option<String>)`](crate::output::ListRulesOutput::next_token): <p>The token to use to retrieve the next page of results. This value is <code>null</code> when there are no more results to return.</p>
    /// - On failure, responds with [`SdkError<ListRulesError>`](crate::error::ListRulesError)
    pub fn list_rules(&self) -> fluent_builders::ListRules {
        fluent_builders::ListRules::new(self.handle.clone())
    }
    /// Constructs a fluent builder for the [`ListTagsForResource`](crate::client::fluent_builders::ListTagsForResource) operation.
    ///
    /// - The fluent builder is configurable:
    ///   - [`resource_arn(impl Into<String>)`](crate::client::fluent_builders::ListTagsForResource::resource_arn) / [`set_resource_arn(Option<String>)`](crate::client::fluent_builders::ListTagsForResource::set_resource_arn): <p>The Amazon Resource Name (ARN) of the retention rule.</p>
    /// - On success, responds with [`ListTagsForResourceOutput`](crate::output::ListTagsForResourceOutput) with field(s):
    ///   - [`tags(Option<Vec<Tag>>)`](crate::output::ListTagsForResourceOutput::tags): <p>Information about the tags assigned to the retention rule.</p>
    /// - On failure, responds with [`SdkError<ListTagsForResourceError>`](crate::error::ListTagsForResourceError)
    pub fn list_tags_for_resource(&self) -> fluent_builders::ListTagsForResource {
        fluent_builders::ListTagsForResource::new(self.handle.clone())
    }
    /// Constructs a fluent builder for the [`TagResource`](crate::client::fluent_builders::TagResource) operation.
    ///
    /// - The fluent builder is configurable:
    ///   - [`resource_arn(impl Into<String>)`](crate::client::fluent_builders::TagResource::resource_arn) / [`set_resource_arn(Option<String>)`](crate::client::fluent_builders::TagResource::set_resource_arn): <p>The Amazon Resource Name (ARN) of the retention rule.</p>
    ///   - [`tags(Vec<Tag>)`](crate::client::fluent_builders::TagResource::tags) / [`set_tags(Option<Vec<Tag>>)`](crate::client::fluent_builders::TagResource::set_tags): <p>Information about the tags to assign to the retention rule.</p>
    /// - On success, responds with [`TagResourceOutput`](crate::output::TagResourceOutput)

    /// - On failure, responds with [`SdkError<TagResourceError>`](crate::error::TagResourceError)
    pub fn tag_resource(&self) -> fluent_builders::TagResource {
        fluent_builders::TagResource::new(self.handle.clone())
    }
    /// Constructs a fluent builder for the [`UntagResource`](crate::client::fluent_builders::UntagResource) operation.
    ///
    /// - The fluent builder is configurable:
    ///   - [`resource_arn(impl Into<String>)`](crate::client::fluent_builders::UntagResource::resource_arn) / [`set_resource_arn(Option<String>)`](crate::client::fluent_builders::UntagResource::set_resource_arn): <p>The Amazon Resource Name (ARN) of the retention rule.</p>
    ///   - [`tag_keys(Vec<String>)`](crate::client::fluent_builders::UntagResource::tag_keys) / [`set_tag_keys(Option<Vec<String>>)`](crate::client::fluent_builders::UntagResource::set_tag_keys): <p>The tag keys of the tags to unassign. All tags that have the specified tag key are unassigned.</p>
    /// - On success, responds with [`UntagResourceOutput`](crate::output::UntagResourceOutput)

    /// - On failure, responds with [`SdkError<UntagResourceError>`](crate::error::UntagResourceError)
    pub fn untag_resource(&self) -> fluent_builders::UntagResource {
        fluent_builders::UntagResource::new(self.handle.clone())
    }
    /// Constructs a fluent builder for the [`UpdateRule`](crate::client::fluent_builders::UpdateRule) operation.
    ///
    /// - The fluent builder is configurable:
    ///   - [`identifier(impl Into<String>)`](crate::client::fluent_builders::UpdateRule::identifier) / [`set_identifier(Option<String>)`](crate::client::fluent_builders::UpdateRule::set_identifier): <p>The unique ID of the retention rule.</p>
    ///   - [`retention_period(RetentionPeriod)`](crate::client::fluent_builders::UpdateRule::retention_period) / [`set_retention_period(Option<RetentionPeriod>)`](crate::client::fluent_builders::UpdateRule::set_retention_period): <p>Information about the retention period for which the retention rule is to retain resources.</p>
    ///   - [`description(impl Into<String>)`](crate::client::fluent_builders::UpdateRule::description) / [`set_description(Option<String>)`](crate::client::fluent_builders::UpdateRule::set_description): <p>The retention rule description.</p>
    ///   - [`resource_type(ResourceType)`](crate::client::fluent_builders::UpdateRule::resource_type) / [`set_resource_type(Option<ResourceType>)`](crate::client::fluent_builders::UpdateRule::set_resource_type): <p>The resource type to be retained by the retention rule. Currently, only Amazon EBS snapshots and EBS-backed AMIs are supported. To retain snapshots, specify <code>EBS_SNAPSHOT</code>. To retain EBS-backed AMIs, specify <code>EC2_IMAGE</code>.</p>
    ///   - [`resource_tags(Vec<ResourceTag>)`](crate::client::fluent_builders::UpdateRule::resource_tags) / [`set_resource_tags(Option<Vec<ResourceTag>>)`](crate::client::fluent_builders::UpdateRule::set_resource_tags): <p>Specifies the resource tags to use to identify resources that are to be retained by a tag-level retention rule. For tag-level retention rules, only deleted resources, of the specified resource type, that have one or more of the specified tag key and value pairs are retained. If a resource is deleted, but it does not have any of the specified tag key and value pairs, it is immediately deleted without being retained by the retention rule.</p>  <p>You can add the same tag key and value pair to a maximum or five retention rules.</p>  <p>To create a Region-level retention rule, omit this parameter. A Region-level retention rule does not have any resource tags specified. It retains all deleted resources of the specified resource type in the Region in which the rule is created, even if the resources are not tagged.</p>
    /// - On success, responds with [`UpdateRuleOutput`](crate::output::UpdateRuleOutput) with field(s):
    ///   - [`identifier(Option<String>)`](crate::output::UpdateRuleOutput::identifier): <p>The unique ID of the retention rule.</p>
    ///   - [`retention_period(Option<RetentionPeriod>)`](crate::output::UpdateRuleOutput::retention_period): <p>Information about the retention period for which the retention rule is to retain resources.</p>
    ///   - [`description(Option<String>)`](crate::output::UpdateRuleOutput::description): <p>The retention rule description.</p>
    ///   - [`resource_type(Option<ResourceType>)`](crate::output::UpdateRuleOutput::resource_type): <p>The resource type retained by the retention rule.</p>
    ///   - [`resource_tags(Option<Vec<ResourceTag>>)`](crate::output::UpdateRuleOutput::resource_tags): <p>Information about the resource tags used to identify resources that are retained by the retention rule.</p>
    ///   - [`status(Option<RuleStatus>)`](crate::output::UpdateRuleOutput::status): <p>The state of the retention rule. Only retention rules that are in the <code>available</code> state retain resources.</p>
    /// - On failure, responds with [`SdkError<UpdateRuleError>`](crate::error::UpdateRuleError)
    pub fn update_rule(&self) -> fluent_builders::UpdateRule {
        fluent_builders::UpdateRule::new(self.handle.clone())
    }
}
pub mod fluent_builders {
    //!
    //! Utilities to ergonomically construct a request to the service.
    //!
    //! Fluent builders are created through the [`Client`](crate::client::Client) by calling
    //! one if its operation methods. After parameters are set using the builder methods,
    //! the `send` method can be called to initiate the request.
    //!
    /// Fluent builder constructing a request to `CreateRule`.
    ///
    /// <p>Creates a Recycle Bin retention rule. For more information, see <a href="https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/recycle-bin-working-with-rules.html#recycle-bin-create-rule"> Create Recycle Bin retention rules</a> in the <i>Amazon Elastic Compute Cloud User Guide</i>.</p>
    #[derive(std::clone::Clone, std::fmt::Debug)]
    pub struct CreateRule {
        handle: std::sync::Arc<super::Handle>,
        inner: crate::input::create_rule_input::Builder,
    }
    impl CreateRule {
        /// Creates a new `CreateRule`.
        pub(crate) fn new(handle: std::sync::Arc<super::Handle>) -> Self {
            Self {
                handle,
                inner: Default::default(),
            }
        }

        /// Sends the request and returns the response.
        ///
        /// If an error occurs, an `SdkError` will be returned with additional details that
        /// can be matched against.
        ///
        /// By default, any retryable failures will be retried twice. Retry behavior
        /// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
        /// set when configuring the client.
        pub async fn send(
            self,
        ) -> std::result::Result<
            crate::output::CreateRuleOutput,
            aws_smithy_http::result::SdkError<crate::error::CreateRuleError>,
        > {
            let op = self
                .inner
                .build()
                .map_err(|err| aws_smithy_http::result::SdkError::ConstructionFailure(err.into()))?
                .make_operation(&self.handle.conf)
                .await
                .map_err(|err| {
                    aws_smithy_http::result::SdkError::ConstructionFailure(err.into())
                })?;
            self.handle.client.call(op).await
        }
        /// <p>Information about the retention period for which the retention rule is to retain resources.</p>
        pub fn retention_period(mut self, input: crate::model::RetentionPeriod) -> Self {
            self.inner = self.inner.retention_period(input);
            self
        }
        /// <p>Information about the retention period for which the retention rule is to retain resources.</p>
        pub fn set_retention_period(
            mut self,
            input: std::option::Option<crate::model::RetentionPeriod>,
        ) -> Self {
            self.inner = self.inner.set_retention_period(input);
            self
        }
        /// <p>The retention rule description.</p>
        pub fn description(mut self, input: impl Into<std::string::String>) -> Self {
            self.inner = self.inner.description(input.into());
            self
        }
        /// <p>The retention rule description.</p>
        pub fn set_description(mut self, input: std::option::Option<std::string::String>) -> Self {
            self.inner = self.inner.set_description(input);
            self
        }
        /// Appends an item to `Tags`.
        ///
        /// To override the contents of this collection use [`set_tags`](Self::set_tags).
        ///
        /// <p>Information about the tags to assign to the retention rule.</p>
        pub fn tags(mut self, input: crate::model::Tag) -> Self {
            self.inner = self.inner.tags(input);
            self
        }
        /// <p>Information about the tags to assign to the retention rule.</p>
        pub fn set_tags(
            mut self,
            input: std::option::Option<std::vec::Vec<crate::model::Tag>>,
        ) -> Self {
            self.inner = self.inner.set_tags(input);
            self
        }
        /// <p>The resource type to be retained by the retention rule. Currently, only Amazon EBS snapshots and EBS-backed AMIs are supported. To retain snapshots, specify <code>EBS_SNAPSHOT</code>. To retain EBS-backed AMIs, specify <code>EC2_IMAGE</code>.</p>
        pub fn resource_type(mut self, input: crate::model::ResourceType) -> Self {
            self.inner = self.inner.resource_type(input);
            self
        }
        /// <p>The resource type to be retained by the retention rule. Currently, only Amazon EBS snapshots and EBS-backed AMIs are supported. To retain snapshots, specify <code>EBS_SNAPSHOT</code>. To retain EBS-backed AMIs, specify <code>EC2_IMAGE</code>.</p>
        pub fn set_resource_type(
            mut self,
            input: std::option::Option<crate::model::ResourceType>,
        ) -> Self {
            self.inner = self.inner.set_resource_type(input);
            self
        }
        /// Appends an item to `ResourceTags`.
        ///
        /// To override the contents of this collection use [`set_resource_tags`](Self::set_resource_tags).
        ///
        /// <p>Specifies the resource tags to use to identify resources that are to be retained by a tag-level retention rule. For tag-level retention rules, only deleted resources, of the specified resource type, that have one or more of the specified tag key and value pairs are retained. If a resource is deleted, but it does not have any of the specified tag key and value pairs, it is immediately deleted without being retained by the retention rule.</p>
        /// <p>You can add the same tag key and value pair to a maximum or five retention rules.</p>
        /// <p>To create a Region-level retention rule, omit this parameter. A Region-level retention rule does not have any resource tags specified. It retains all deleted resources of the specified resource type in the Region in which the rule is created, even if the resources are not tagged.</p>
        pub fn resource_tags(mut self, input: crate::model::ResourceTag) -> Self {
            self.inner = self.inner.resource_tags(input);
            self
        }
        /// <p>Specifies the resource tags to use to identify resources that are to be retained by a tag-level retention rule. For tag-level retention rules, only deleted resources, of the specified resource type, that have one or more of the specified tag key and value pairs are retained. If a resource is deleted, but it does not have any of the specified tag key and value pairs, it is immediately deleted without being retained by the retention rule.</p>
        /// <p>You can add the same tag key and value pair to a maximum or five retention rules.</p>
        /// <p>To create a Region-level retention rule, omit this parameter. A Region-level retention rule does not have any resource tags specified. It retains all deleted resources of the specified resource type in the Region in which the rule is created, even if the resources are not tagged.</p>
        pub fn set_resource_tags(
            mut self,
            input: std::option::Option<std::vec::Vec<crate::model::ResourceTag>>,
        ) -> Self {
            self.inner = self.inner.set_resource_tags(input);
            self
        }
    }
    /// Fluent builder constructing a request to `DeleteRule`.
    ///
    /// <p>Deletes a Recycle Bin retention rule. For more information, see <a href="https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/recycle-bin-working-with-rules.html#recycle-bin-delete-rule"> Delete Recycle Bin retention rules</a> in the <i>Amazon Elastic Compute Cloud User Guide</i>.</p>
    #[derive(std::clone::Clone, std::fmt::Debug)]
    pub struct DeleteRule {
        handle: std::sync::Arc<super::Handle>,
        inner: crate::input::delete_rule_input::Builder,
    }
    impl DeleteRule {
        /// Creates a new `DeleteRule`.
        pub(crate) fn new(handle: std::sync::Arc<super::Handle>) -> Self {
            Self {
                handle,
                inner: Default::default(),
            }
        }

        /// Sends the request and returns the response.
        ///
        /// If an error occurs, an `SdkError` will be returned with additional details that
        /// can be matched against.
        ///
        /// By default, any retryable failures will be retried twice. Retry behavior
        /// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
        /// set when configuring the client.
        pub async fn send(
            self,
        ) -> std::result::Result<
            crate::output::DeleteRuleOutput,
            aws_smithy_http::result::SdkError<crate::error::DeleteRuleError>,
        > {
            let op = self
                .inner
                .build()
                .map_err(|err| aws_smithy_http::result::SdkError::ConstructionFailure(err.into()))?
                .make_operation(&self.handle.conf)
                .await
                .map_err(|err| {
                    aws_smithy_http::result::SdkError::ConstructionFailure(err.into())
                })?;
            self.handle.client.call(op).await
        }
        /// <p>The unique ID of the retention rule.</p>
        pub fn identifier(mut self, input: impl Into<std::string::String>) -> Self {
            self.inner = self.inner.identifier(input.into());
            self
        }
        /// <p>The unique ID of the retention rule.</p>
        pub fn set_identifier(mut self, input: std::option::Option<std::string::String>) -> Self {
            self.inner = self.inner.set_identifier(input);
            self
        }
    }
    /// Fluent builder constructing a request to `GetRule`.
    ///
    /// <p>Gets information about a Recycle Bin retention rule.</p>
    #[derive(std::clone::Clone, std::fmt::Debug)]
    pub struct GetRule {
        handle: std::sync::Arc<super::Handle>,
        inner: crate::input::get_rule_input::Builder,
    }
    impl GetRule {
        /// Creates a new `GetRule`.
        pub(crate) fn new(handle: std::sync::Arc<super::Handle>) -> Self {
            Self {
                handle,
                inner: Default::default(),
            }
        }

        /// Sends the request and returns the response.
        ///
        /// If an error occurs, an `SdkError` will be returned with additional details that
        /// can be matched against.
        ///
        /// By default, any retryable failures will be retried twice. Retry behavior
        /// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
        /// set when configuring the client.
        pub async fn send(
            self,
        ) -> std::result::Result<
            crate::output::GetRuleOutput,
            aws_smithy_http::result::SdkError<crate::error::GetRuleError>,
        > {
            let op = self
                .inner
                .build()
                .map_err(|err| aws_smithy_http::result::SdkError::ConstructionFailure(err.into()))?
                .make_operation(&self.handle.conf)
                .await
                .map_err(|err| {
                    aws_smithy_http::result::SdkError::ConstructionFailure(err.into())
                })?;
            self.handle.client.call(op).await
        }
        /// <p>The unique ID of the retention rule.</p>
        pub fn identifier(mut self, input: impl Into<std::string::String>) -> Self {
            self.inner = self.inner.identifier(input.into());
            self
        }
        /// <p>The unique ID of the retention rule.</p>
        pub fn set_identifier(mut self, input: std::option::Option<std::string::String>) -> Self {
            self.inner = self.inner.set_identifier(input);
            self
        }
    }
    /// Fluent builder constructing a request to `ListRules`.
    ///
    /// <p>Lists the Recycle Bin retention rules in the Region.</p>
    #[derive(std::clone::Clone, std::fmt::Debug)]
    pub struct ListRules {
        handle: std::sync::Arc<super::Handle>,
        inner: crate::input::list_rules_input::Builder,
    }
    impl ListRules {
        /// Creates a new `ListRules`.
        pub(crate) fn new(handle: std::sync::Arc<super::Handle>) -> Self {
            Self {
                handle,
                inner: Default::default(),
            }
        }

        /// Sends the request and returns the response.
        ///
        /// If an error occurs, an `SdkError` will be returned with additional details that
        /// can be matched against.
        ///
        /// By default, any retryable failures will be retried twice. Retry behavior
        /// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
        /// set when configuring the client.
        pub async fn send(
            self,
        ) -> std::result::Result<
            crate::output::ListRulesOutput,
            aws_smithy_http::result::SdkError<crate::error::ListRulesError>,
        > {
            let op = self
                .inner
                .build()
                .map_err(|err| aws_smithy_http::result::SdkError::ConstructionFailure(err.into()))?
                .make_operation(&self.handle.conf)
                .await
                .map_err(|err| {
                    aws_smithy_http::result::SdkError::ConstructionFailure(err.into())
                })?;
            self.handle.client.call(op).await
        }
        /// Create a paginator for this request
        ///
        /// Paginators are used by calling [`send().await`](crate::paginator::ListRulesPaginator::send) which returns a [`Stream`](tokio_stream::Stream).
        pub fn into_paginator(self) -> crate::paginator::ListRulesPaginator {
            crate::paginator::ListRulesPaginator::new(self.handle, self.inner)
        }
        /// <p>The maximum number of results to return with a single call. To retrieve the remaining results, make another call with the returned <code>NextToken</code> value.</p>
        pub fn max_results(mut self, input: i32) -> Self {
            self.inner = self.inner.max_results(input);
            self
        }
        /// <p>The maximum number of results to return with a single call. To retrieve the remaining results, make another call with the returned <code>NextToken</code> value.</p>
        pub fn set_max_results(mut self, input: std::option::Option<i32>) -> Self {
            self.inner = self.inner.set_max_results(input);
            self
        }
        /// <p>The token for the next page of results.</p>
        pub fn next_token(mut self, input: impl Into<std::string::String>) -> Self {
            self.inner = self.inner.next_token(input.into());
            self
        }
        /// <p>The token for the next page of results.</p>
        pub fn set_next_token(mut self, input: std::option::Option<std::string::String>) -> Self {
            self.inner = self.inner.set_next_token(input);
            self
        }
        /// <p>The resource type retained by the retention rule. Only retention rules that retain the specified resource type are listed. Currently, only Amazon EBS snapshots and EBS-backed AMIs are supported. To list retention rules that retain snapshots, specify <code>EBS_SNAPSHOT</code>. To list retention rules that retain EBS-backed AMIs, specify <code>EC2_IMAGE</code>.</p>
        pub fn resource_type(mut self, input: crate::model::ResourceType) -> Self {
            self.inner = self.inner.resource_type(input);
            self
        }
        /// <p>The resource type retained by the retention rule. Only retention rules that retain the specified resource type are listed. Currently, only Amazon EBS snapshots and EBS-backed AMIs are supported. To list retention rules that retain snapshots, specify <code>EBS_SNAPSHOT</code>. To list retention rules that retain EBS-backed AMIs, specify <code>EC2_IMAGE</code>.</p>
        pub fn set_resource_type(
            mut self,
            input: std::option::Option<crate::model::ResourceType>,
        ) -> Self {
            self.inner = self.inner.set_resource_type(input);
            self
        }
        /// Appends an item to `ResourceTags`.
        ///
        /// To override the contents of this collection use [`set_resource_tags`](Self::set_resource_tags).
        ///
        /// <p>Information about the resource tags used to identify resources that are retained by the retention rule.</p>
        pub fn resource_tags(mut self, input: crate::model::ResourceTag) -> Self {
            self.inner = self.inner.resource_tags(input);
            self
        }
        /// <p>Information about the resource tags used to identify resources that are retained by the retention rule.</p>
        pub fn set_resource_tags(
            mut self,
            input: std::option::Option<std::vec::Vec<crate::model::ResourceTag>>,
        ) -> Self {
            self.inner = self.inner.set_resource_tags(input);
            self
        }
    }
    /// Fluent builder constructing a request to `ListTagsForResource`.
    ///
    /// <p>Lists the tags assigned to a retention rule.</p>
    #[derive(std::clone::Clone, std::fmt::Debug)]
    pub struct ListTagsForResource {
        handle: std::sync::Arc<super::Handle>,
        inner: crate::input::list_tags_for_resource_input::Builder,
    }
    impl ListTagsForResource {
        /// Creates a new `ListTagsForResource`.
        pub(crate) fn new(handle: std::sync::Arc<super::Handle>) -> Self {
            Self {
                handle,
                inner: Default::default(),
            }
        }

        /// Sends the request and returns the response.
        ///
        /// If an error occurs, an `SdkError` will be returned with additional details that
        /// can be matched against.
        ///
        /// By default, any retryable failures will be retried twice. Retry behavior
        /// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
        /// set when configuring the client.
        pub async fn send(
            self,
        ) -> std::result::Result<
            crate::output::ListTagsForResourceOutput,
            aws_smithy_http::result::SdkError<crate::error::ListTagsForResourceError>,
        > {
            let op = self
                .inner
                .build()
                .map_err(|err| aws_smithy_http::result::SdkError::ConstructionFailure(err.into()))?
                .make_operation(&self.handle.conf)
                .await
                .map_err(|err| {
                    aws_smithy_http::result::SdkError::ConstructionFailure(err.into())
                })?;
            self.handle.client.call(op).await
        }
        /// <p>The Amazon Resource Name (ARN) of the retention rule.</p>
        pub fn resource_arn(mut self, input: impl Into<std::string::String>) -> Self {
            self.inner = self.inner.resource_arn(input.into());
            self
        }
        /// <p>The Amazon Resource Name (ARN) of the retention rule.</p>
        pub fn set_resource_arn(mut self, input: std::option::Option<std::string::String>) -> Self {
            self.inner = self.inner.set_resource_arn(input);
            self
        }
    }
    /// Fluent builder constructing a request to `TagResource`.
    ///
    /// <p>Assigns tags to the specified retention rule.</p>
    #[derive(std::clone::Clone, std::fmt::Debug)]
    pub struct TagResource {
        handle: std::sync::Arc<super::Handle>,
        inner: crate::input::tag_resource_input::Builder,
    }
    impl TagResource {
        /// Creates a new `TagResource`.
        pub(crate) fn new(handle: std::sync::Arc<super::Handle>) -> Self {
            Self {
                handle,
                inner: Default::default(),
            }
        }

        /// Sends the request and returns the response.
        ///
        /// If an error occurs, an `SdkError` will be returned with additional details that
        /// can be matched against.
        ///
        /// By default, any retryable failures will be retried twice. Retry behavior
        /// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
        /// set when configuring the client.
        pub async fn send(
            self,
        ) -> std::result::Result<
            crate::output::TagResourceOutput,
            aws_smithy_http::result::SdkError<crate::error::TagResourceError>,
        > {
            let op = self
                .inner
                .build()
                .map_err(|err| aws_smithy_http::result::SdkError::ConstructionFailure(err.into()))?
                .make_operation(&self.handle.conf)
                .await
                .map_err(|err| {
                    aws_smithy_http::result::SdkError::ConstructionFailure(err.into())
                })?;
            self.handle.client.call(op).await
        }
        /// <p>The Amazon Resource Name (ARN) of the retention rule.</p>
        pub fn resource_arn(mut self, input: impl Into<std::string::String>) -> Self {
            self.inner = self.inner.resource_arn(input.into());
            self
        }
        /// <p>The Amazon Resource Name (ARN) of the retention rule.</p>
        pub fn set_resource_arn(mut self, input: std::option::Option<std::string::String>) -> Self {
            self.inner = self.inner.set_resource_arn(input);
            self
        }
        /// Appends an item to `Tags`.
        ///
        /// To override the contents of this collection use [`set_tags`](Self::set_tags).
        ///
        /// <p>Information about the tags to assign to the retention rule.</p>
        pub fn tags(mut self, input: crate::model::Tag) -> Self {
            self.inner = self.inner.tags(input);
            self
        }
        /// <p>Information about the tags to assign to the retention rule.</p>
        pub fn set_tags(
            mut self,
            input: std::option::Option<std::vec::Vec<crate::model::Tag>>,
        ) -> Self {
            self.inner = self.inner.set_tags(input);
            self
        }
    }
    /// Fluent builder constructing a request to `UntagResource`.
    ///
    /// <p>Unassigns a tag from a retention rule.</p>
    #[derive(std::clone::Clone, std::fmt::Debug)]
    pub struct UntagResource {
        handle: std::sync::Arc<super::Handle>,
        inner: crate::input::untag_resource_input::Builder,
    }
    impl UntagResource {
        /// Creates a new `UntagResource`.
        pub(crate) fn new(handle: std::sync::Arc<super::Handle>) -> Self {
            Self {
                handle,
                inner: Default::default(),
            }
        }

        /// Sends the request and returns the response.
        ///
        /// If an error occurs, an `SdkError` will be returned with additional details that
        /// can be matched against.
        ///
        /// By default, any retryable failures will be retried twice. Retry behavior
        /// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
        /// set when configuring the client.
        pub async fn send(
            self,
        ) -> std::result::Result<
            crate::output::UntagResourceOutput,
            aws_smithy_http::result::SdkError<crate::error::UntagResourceError>,
        > {
            let op = self
                .inner
                .build()
                .map_err(|err| aws_smithy_http::result::SdkError::ConstructionFailure(err.into()))?
                .make_operation(&self.handle.conf)
                .await
                .map_err(|err| {
                    aws_smithy_http::result::SdkError::ConstructionFailure(err.into())
                })?;
            self.handle.client.call(op).await
        }
        /// <p>The Amazon Resource Name (ARN) of the retention rule.</p>
        pub fn resource_arn(mut self, input: impl Into<std::string::String>) -> Self {
            self.inner = self.inner.resource_arn(input.into());
            self
        }
        /// <p>The Amazon Resource Name (ARN) of the retention rule.</p>
        pub fn set_resource_arn(mut self, input: std::option::Option<std::string::String>) -> Self {
            self.inner = self.inner.set_resource_arn(input);
            self
        }
        /// Appends an item to `TagKeys`.
        ///
        /// To override the contents of this collection use [`set_tag_keys`](Self::set_tag_keys).
        ///
        /// <p>The tag keys of the tags to unassign. All tags that have the specified tag key are unassigned.</p>
        pub fn tag_keys(mut self, input: impl Into<std::string::String>) -> Self {
            self.inner = self.inner.tag_keys(input.into());
            self
        }
        /// <p>The tag keys of the tags to unassign. All tags that have the specified tag key are unassigned.</p>
        pub fn set_tag_keys(
            mut self,
            input: std::option::Option<std::vec::Vec<std::string::String>>,
        ) -> Self {
            self.inner = self.inner.set_tag_keys(input);
            self
        }
    }
    /// Fluent builder constructing a request to `UpdateRule`.
    ///
    /// <p>Updates an existing Recycle Bin retention rule. For more information, see <a href="https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/recycle-bin-working-with-rules.html#recycle-bin-update-rule"> Update Recycle Bin retention rules</a> in the <i>Amazon Elastic Compute Cloud User Guide</i>.</p>
    #[derive(std::clone::Clone, std::fmt::Debug)]
    pub struct UpdateRule {
        handle: std::sync::Arc<super::Handle>,
        inner: crate::input::update_rule_input::Builder,
    }
    impl UpdateRule {
        /// Creates a new `UpdateRule`.
        pub(crate) fn new(handle: std::sync::Arc<super::Handle>) -> Self {
            Self {
                handle,
                inner: Default::default(),
            }
        }

        /// Sends the request and returns the response.
        ///
        /// If an error occurs, an `SdkError` will be returned with additional details that
        /// can be matched against.
        ///
        /// By default, any retryable failures will be retried twice. Retry behavior
        /// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
        /// set when configuring the client.
        pub async fn send(
            self,
        ) -> std::result::Result<
            crate::output::UpdateRuleOutput,
            aws_smithy_http::result::SdkError<crate::error::UpdateRuleError>,
        > {
            let op = self
                .inner
                .build()
                .map_err(|err| aws_smithy_http::result::SdkError::ConstructionFailure(err.into()))?
                .make_operation(&self.handle.conf)
                .await
                .map_err(|err| {
                    aws_smithy_http::result::SdkError::ConstructionFailure(err.into())
                })?;
            self.handle.client.call(op).await
        }
        /// <p>The unique ID of the retention rule.</p>
        pub fn identifier(mut self, input: impl Into<std::string::String>) -> Self {
            self.inner = self.inner.identifier(input.into());
            self
        }
        /// <p>The unique ID of the retention rule.</p>
        pub fn set_identifier(mut self, input: std::option::Option<std::string::String>) -> Self {
            self.inner = self.inner.set_identifier(input);
            self
        }
        /// <p>Information about the retention period for which the retention rule is to retain resources.</p>
        pub fn retention_period(mut self, input: crate::model::RetentionPeriod) -> Self {
            self.inner = self.inner.retention_period(input);
            self
        }
        /// <p>Information about the retention period for which the retention rule is to retain resources.</p>
        pub fn set_retention_period(
            mut self,
            input: std::option::Option<crate::model::RetentionPeriod>,
        ) -> Self {
            self.inner = self.inner.set_retention_period(input);
            self
        }
        /// <p>The retention rule description.</p>
        pub fn description(mut self, input: impl Into<std::string::String>) -> Self {
            self.inner = self.inner.description(input.into());
            self
        }
        /// <p>The retention rule description.</p>
        pub fn set_description(mut self, input: std::option::Option<std::string::String>) -> Self {
            self.inner = self.inner.set_description(input);
            self
        }
        /// <p>The resource type to be retained by the retention rule. Currently, only Amazon EBS snapshots and EBS-backed AMIs are supported. To retain snapshots, specify <code>EBS_SNAPSHOT</code>. To retain EBS-backed AMIs, specify <code>EC2_IMAGE</code>.</p>
        pub fn resource_type(mut self, input: crate::model::ResourceType) -> Self {
            self.inner = self.inner.resource_type(input);
            self
        }
        /// <p>The resource type to be retained by the retention rule. Currently, only Amazon EBS snapshots and EBS-backed AMIs are supported. To retain snapshots, specify <code>EBS_SNAPSHOT</code>. To retain EBS-backed AMIs, specify <code>EC2_IMAGE</code>.</p>
        pub fn set_resource_type(
            mut self,
            input: std::option::Option<crate::model::ResourceType>,
        ) -> Self {
            self.inner = self.inner.set_resource_type(input);
            self
        }
        /// Appends an item to `ResourceTags`.
        ///
        /// To override the contents of this collection use [`set_resource_tags`](Self::set_resource_tags).
        ///
        /// <p>Specifies the resource tags to use to identify resources that are to be retained by a tag-level retention rule. For tag-level retention rules, only deleted resources, of the specified resource type, that have one or more of the specified tag key and value pairs are retained. If a resource is deleted, but it does not have any of the specified tag key and value pairs, it is immediately deleted without being retained by the retention rule.</p>
        /// <p>You can add the same tag key and value pair to a maximum or five retention rules.</p>
        /// <p>To create a Region-level retention rule, omit this parameter. A Region-level retention rule does not have any resource tags specified. It retains all deleted resources of the specified resource type in the Region in which the rule is created, even if the resources are not tagged.</p>
        pub fn resource_tags(mut self, input: crate::model::ResourceTag) -> Self {
            self.inner = self.inner.resource_tags(input);
            self
        }
        /// <p>Specifies the resource tags to use to identify resources that are to be retained by a tag-level retention rule. For tag-level retention rules, only deleted resources, of the specified resource type, that have one or more of the specified tag key and value pairs are retained. If a resource is deleted, but it does not have any of the specified tag key and value pairs, it is immediately deleted without being retained by the retention rule.</p>
        /// <p>You can add the same tag key and value pair to a maximum or five retention rules.</p>
        /// <p>To create a Region-level retention rule, omit this parameter. A Region-level retention rule does not have any resource tags specified. It retains all deleted resources of the specified resource type in the Region in which the rule is created, even if the resources are not tagged.</p>
        pub fn set_resource_tags(
            mut self,
            input: std::option::Option<std::vec::Vec<crate::model::ResourceTag>>,
        ) -> Self {
            self.inner = self.inner.set_resource_tags(input);
            self
        }
    }
}

impl Client {
    /// Creates a client with the given service config and connector override.
    pub fn from_conf_conn<C, E>(conf: crate::Config, conn: C) -> Self
    where
        C: aws_smithy_client::bounds::SmithyConnector<Error = E> + Send + 'static,
        E: Into<aws_smithy_http::result::ConnectorError>,
    {
        let retry_config = conf.retry_config.as_ref().cloned().unwrap_or_default();
        let timeout_config = conf.timeout_config.as_ref().cloned().unwrap_or_default();
        let sleep_impl = conf.sleep_impl.clone();
        let mut builder = aws_smithy_client::Builder::new()
            .connector(aws_smithy_client::erase::DynConnector::new(conn))
            .middleware(aws_smithy_client::erase::DynMiddleware::new(
                crate::middleware::DefaultMiddleware::new(),
            ));
        builder.set_retry_config(retry_config.into());
        builder.set_timeout_config(timeout_config);
        if let Some(sleep_impl) = sleep_impl {
            builder.set_sleep_impl(Some(sleep_impl));
        }
        let client = builder.build();
        Self {
            handle: std::sync::Arc::new(Handle { client, conf }),
        }
    }

    /// Creates a new client from a shared config.
    #[cfg(any(feature = "rustls", feature = "native-tls"))]
    pub fn new(sdk_config: &aws_types::sdk_config::SdkConfig) -> Self {
        Self::from_conf(sdk_config.into())
    }

    /// Creates a new client from the service [`Config`](crate::Config).
    #[cfg(any(feature = "rustls", feature = "native-tls"))]
    pub fn from_conf(conf: crate::Config) -> Self {
        let retry_config = conf.retry_config.as_ref().cloned().unwrap_or_default();
        let timeout_config = conf.timeout_config.as_ref().cloned().unwrap_or_default();
        let sleep_impl = conf.sleep_impl.clone();
        let mut builder = aws_smithy_client::Builder::dyn_https().middleware(
            aws_smithy_client::erase::DynMiddleware::new(
                crate::middleware::DefaultMiddleware::new(),
            ),
        );
        builder.set_retry_config(retry_config.into());
        builder.set_timeout_config(timeout_config);
        // the builder maintains a try-state. To avoid suppressing the warning when sleep is unset,
        // only set it if we actually have a sleep impl.
        if let Some(sleep_impl) = sleep_impl {
            builder.set_sleep_impl(Some(sleep_impl));
        }
        let client = builder.build();

        Self {
            handle: std::sync::Arc::new(Handle { client, conf }),
        }
    }
}