// Code generated by software.amazon.smithy.rust.codegen.smithy-rs. DO NOT EDIT.
pub use crate::operation::create_campaign::_create_campaign_output::CreateCampaignOutputBuilder;

pub use crate::operation::create_campaign::_create_campaign_input::CreateCampaignInputBuilder;

impl CreateCampaignInputBuilder {
    /// Sends a request with this input using the given client.
    pub async fn send_with(
        self,
        client: &crate::Client,
    ) -> ::std::result::Result<
        crate::operation::create_campaign::CreateCampaignOutput,
        ::aws_smithy_http::result::SdkError<
            crate::operation::create_campaign::CreateCampaignError,
            ::aws_smithy_runtime_api::client::orchestrator::HttpResponse,
        >,
    > {
        let mut fluent_builder = client.create_campaign();
        fluent_builder.inner = self;
        fluent_builder.send().await
    }
}
/// Fluent builder constructing a request to `CreateCampaign`.
///
/// <p>Creates a campaign that deploys a solution version. When a client calls the <a href="https://docs.aws.amazon.com/personalize/latest/dg/API_RS_GetRecommendations.html">GetRecommendations</a> and <a href="https://docs.aws.amazon.com/personalize/latest/dg/API_RS_GetPersonalizedRanking.html">GetPersonalizedRanking</a> APIs, a campaign is specified in the request.</p>
/// <p> <b>Minimum Provisioned TPS and Auto-Scaling</b> </p> <important>
/// <p> A high <code>minProvisionedTPS</code> will increase your bill. We recommend starting with 1 for <code>minProvisionedTPS</code> (the default). Track your usage using Amazon CloudWatch metrics, and increase the <code>minProvisionedTPS</code> as necessary.</p>
/// </important>
/// <p>A transaction is a single <code>GetRecommendations</code> or <code>GetPersonalizedRanking</code> call. Transactions per second (TPS) is the throughput and unit of billing for Amazon Personalize. The minimum provisioned TPS (<code>minProvisionedTPS</code>) specifies the baseline throughput provisioned by Amazon Personalize, and thus, the minimum billing charge. </p>
/// <p> If your TPS increases beyond <code>minProvisionedTPS</code>, Amazon Personalize auto-scales the provisioned capacity up and down, but never below <code>minProvisionedTPS</code>. There's a short time delay while the capacity is increased that might cause loss of transactions.</p>
/// <p>The actual TPS used is calculated as the average requests/second within a 5-minute window. You pay for maximum of either the minimum provisioned TPS or the actual TPS. We recommend starting with a low <code>minProvisionedTPS</code>, track your usage using Amazon CloudWatch metrics, and then increase the <code>minProvisionedTPS</code> as necessary.</p>
/// <p> <b>Status</b> </p>
/// <p>A campaign can be in one of the following states:</p>
/// <ul>
/// <li> <p>CREATE PENDING &gt; CREATE IN_PROGRESS &gt; ACTIVE -or- CREATE FAILED</p> </li>
/// <li> <p>DELETE PENDING &gt; DELETE IN_PROGRESS</p> </li>
/// </ul>
/// <p>To get the campaign status, call <a href="https://docs.aws.amazon.com/personalize/latest/dg/API_DescribeCampaign.html">DescribeCampaign</a>.</p> <note>
/// <p>Wait until the <code>status</code> of the campaign is <code>ACTIVE</code> before asking the campaign for recommendations.</p>
/// </note>
/// <p class="title"> <b>Related APIs</b> </p>
/// <ul>
/// <li> <p> <a href="https://docs.aws.amazon.com/personalize/latest/dg/API_ListCampaigns.html">ListCampaigns</a> </p> </li>
/// <li> <p> <a href="https://docs.aws.amazon.com/personalize/latest/dg/API_DescribeCampaign.html">DescribeCampaign</a> </p> </li>
/// <li> <p> <a href="https://docs.aws.amazon.com/personalize/latest/dg/API_UpdateCampaign.html">UpdateCampaign</a> </p> </li>
/// <li> <p> <a href="https://docs.aws.amazon.com/personalize/latest/dg/API_DeleteCampaign.html">DeleteCampaign</a> </p> </li>
/// </ul>
#[derive(::std::clone::Clone, ::std::fmt::Debug)]
pub struct CreateCampaignFluentBuilder {
    handle: ::std::sync::Arc<crate::client::Handle>,
    inner: crate::operation::create_campaign::builders::CreateCampaignInputBuilder,
    config_override: ::std::option::Option<crate::config::Builder>,
}
impl
    crate::client::customize::internal::CustomizableSend<
        crate::operation::create_campaign::CreateCampaignOutput,
        crate::operation::create_campaign::CreateCampaignError,
    > for CreateCampaignFluentBuilder
{
    fn send(
        self,
        config_override: crate::config::Builder,
    ) -> crate::client::customize::internal::BoxFuture<
        crate::client::customize::internal::SendResult<
            crate::operation::create_campaign::CreateCampaignOutput,
            crate::operation::create_campaign::CreateCampaignError,
        >,
    > {
        ::std::boxed::Box::pin(async move { self.config_override(config_override).send().await })
    }
}
impl CreateCampaignFluentBuilder {
    /// Creates a new `CreateCampaign`.
    pub(crate) fn new(handle: ::std::sync::Arc<crate::client::Handle>) -> Self {
        Self {
            handle,
            inner: ::std::default::Default::default(),
            config_override: ::std::option::Option::None,
        }
    }
    /// Access the CreateCampaign as a reference.
    pub fn as_input(&self) -> &crate::operation::create_campaign::builders::CreateCampaignInputBuilder {
        &self.inner
    }
    /// Sends the request and returns the response.
    ///
    /// If an error occurs, an `SdkError` will be returned with additional details that
    /// can be matched against.
    ///
    /// By default, any retryable failures will be retried twice. Retry behavior
    /// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
    /// set when configuring the client.
    pub async fn send(
        self,
    ) -> ::std::result::Result<
        crate::operation::create_campaign::CreateCampaignOutput,
        ::aws_smithy_http::result::SdkError<
            crate::operation::create_campaign::CreateCampaignError,
            ::aws_smithy_runtime_api::client::orchestrator::HttpResponse,
        >,
    > {
        let input = self.inner.build().map_err(::aws_smithy_http::result::SdkError::construction_failure)?;
        let runtime_plugins = crate::operation::create_campaign::CreateCampaign::operation_runtime_plugins(
            self.handle.runtime_plugins.clone(),
            &self.handle.conf,
            self.config_override,
        );
        crate::operation::create_campaign::CreateCampaign::orchestrate(&runtime_plugins, input).await
    }

    /// Consumes this builder, creating a customizable operation that can be modified before being
    /// sent.
    // TODO(enableNewSmithyRuntimeCleanup): Remove `async` and `Result` once we switch to orchestrator
    pub async fn customize(
        self,
    ) -> ::std::result::Result<
        crate::client::customize::orchestrator::CustomizableOperation<
            crate::operation::create_campaign::CreateCampaignOutput,
            crate::operation::create_campaign::CreateCampaignError,
            Self,
        >,
        ::aws_smithy_http::result::SdkError<crate::operation::create_campaign::CreateCampaignError>,
    > {
        ::std::result::Result::Ok(crate::client::customize::orchestrator::CustomizableOperation::new(self))
    }
    pub(crate) fn config_override(mut self, config_override: impl Into<crate::config::Builder>) -> Self {
        self.set_config_override(Some(config_override.into()));
        self
    }

    pub(crate) fn set_config_override(&mut self, config_override: Option<crate::config::Builder>) -> &mut Self {
        self.config_override = config_override;
        self
    }
    /// <p>A name for the new campaign. The campaign name must be unique within your account.</p>
    pub fn name(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
        self.inner = self.inner.name(input.into());
        self
    }
    /// <p>A name for the new campaign. The campaign name must be unique within your account.</p>
    pub fn set_name(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
        self.inner = self.inner.set_name(input);
        self
    }
    /// <p>A name for the new campaign. The campaign name must be unique within your account.</p>
    pub fn get_name(&self) -> &::std::option::Option<::std::string::String> {
        self.inner.get_name()
    }
    /// <p>The Amazon Resource Name (ARN) of the solution version to deploy.</p>
    pub fn solution_version_arn(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
        self.inner = self.inner.solution_version_arn(input.into());
        self
    }
    /// <p>The Amazon Resource Name (ARN) of the solution version to deploy.</p>
    pub fn set_solution_version_arn(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
        self.inner = self.inner.set_solution_version_arn(input);
        self
    }
    /// <p>The Amazon Resource Name (ARN) of the solution version to deploy.</p>
    pub fn get_solution_version_arn(&self) -> &::std::option::Option<::std::string::String> {
        self.inner.get_solution_version_arn()
    }
    /// <p>Specifies the requested minimum provisioned transactions (recommendations) per second that Amazon Personalize will support. A high <code>minProvisionedTPS</code> will increase your bill. We recommend starting with 1 for <code>minProvisionedTPS</code> (the default). Track your usage using Amazon CloudWatch metrics, and increase the <code>minProvisionedTPS</code> as necessary.</p>
    pub fn min_provisioned_tps(mut self, input: i32) -> Self {
        self.inner = self.inner.min_provisioned_tps(input);
        self
    }
    /// <p>Specifies the requested minimum provisioned transactions (recommendations) per second that Amazon Personalize will support. A high <code>minProvisionedTPS</code> will increase your bill. We recommend starting with 1 for <code>minProvisionedTPS</code> (the default). Track your usage using Amazon CloudWatch metrics, and increase the <code>minProvisionedTPS</code> as necessary.</p>
    pub fn set_min_provisioned_tps(mut self, input: ::std::option::Option<i32>) -> Self {
        self.inner = self.inner.set_min_provisioned_tps(input);
        self
    }
    /// <p>Specifies the requested minimum provisioned transactions (recommendations) per second that Amazon Personalize will support. A high <code>minProvisionedTPS</code> will increase your bill. We recommend starting with 1 for <code>minProvisionedTPS</code> (the default). Track your usage using Amazon CloudWatch metrics, and increase the <code>minProvisionedTPS</code> as necessary.</p>
    pub fn get_min_provisioned_tps(&self) -> &::std::option::Option<i32> {
        self.inner.get_min_provisioned_tps()
    }
    /// <p>The configuration details of a campaign.</p>
    pub fn campaign_config(mut self, input: crate::types::CampaignConfig) -> Self {
        self.inner = self.inner.campaign_config(input);
        self
    }
    /// <p>The configuration details of a campaign.</p>
    pub fn set_campaign_config(mut self, input: ::std::option::Option<crate::types::CampaignConfig>) -> Self {
        self.inner = self.inner.set_campaign_config(input);
        self
    }
    /// <p>The configuration details of a campaign.</p>
    pub fn get_campaign_config(&self) -> &::std::option::Option<crate::types::CampaignConfig> {
        self.inner.get_campaign_config()
    }
    /// Appends an item to `tags`.
    ///
    /// To override the contents of this collection use [`set_tags`](Self::set_tags).
    ///
    /// <p>A list of <a href="https://docs.aws.amazon.com/personalize/latest/dg/tagging-resources.html">tags</a> to apply to the campaign.</p>
    pub fn tags(mut self, input: crate::types::Tag) -> Self {
        self.inner = self.inner.tags(input);
        self
    }
    /// <p>A list of <a href="https://docs.aws.amazon.com/personalize/latest/dg/tagging-resources.html">tags</a> to apply to the campaign.</p>
    pub fn set_tags(mut self, input: ::std::option::Option<::std::vec::Vec<crate::types::Tag>>) -> Self {
        self.inner = self.inner.set_tags(input);
        self
    }
    /// <p>A list of <a href="https://docs.aws.amazon.com/personalize/latest/dg/tagging-resources.html">tags</a> to apply to the campaign.</p>
    pub fn get_tags(&self) -> &::std::option::Option<::std::vec::Vec<crate::types::Tag>> {
        self.inner.get_tags()
    }
}