Struct aws_sdk_networkmonitor::client::Client

pub struct Client { /* private fields */ }

Client for Amazon CloudWatch Network Monitor

Client for invoking operations on Amazon CloudWatch Network Monitor. Each operation on Amazon CloudWatch Network Monitor is a method on this this struct. .send() MUST be invoked on the generated operations to dispatch the request to the service.

Constructing a Client

A Config is required to construct a client. For most use cases, the aws-config crate should be used to automatically resolve this config using aws_config::load_from_env(), since this will resolve an SdkConfig which can be shared across multiple different AWS SDK clients. This config resolution process can be customized by calling aws_config::from_env() instead, which returns a ConfigLoader that uses the builder pattern to customize the default config.

In the simplest case, creating a client looks as follows:

let config = aws_config::load_from_env().await;
let client = aws_sdk_networkmonitor::Client::new(&config);

Occasionally, SDKs may have additional service-specific values that can be set on the Config that is absent from SdkConfig, or slightly different settings for a specific client may be desired. The Config struct implements From<&SdkConfig>, so setting these specific settings can be done as follows:

let sdk_config = ::aws_config::load_from_env().await;
let config = aws_sdk_networkmonitor::config::Builder::from(&sdk_config)
    .some_service_specific_setting("value")
    .build();

See the aws-config docs and Config for more information on customizing configuration.

Note: Client construction is expensive due to connection thread pool initialization, and should be done once at application start-up.

Using the Client

A client has a function for every operation that can be performed by the service. For example, the ListTagsForResource operation has a Client::list_tags_for_resource, function which returns a builder for that operation. The fluent builder ultimately has a send() function that returns an async future that returns a result, as illustrated below:

let result = client.list_tags_for_resource()
    .resource_arn("example")
    .send()
    .await;

The underlying HTTP requests that get made by this can be modified with the customize_operation function on the fluent builder. See the customize module for more information.

Implementations

impl Client

pub fn create_monitor(&self) -> CreateMonitorFluentBuilder

Constructs a fluent builder for the CreateMonitor operation.

• The fluent builder is configurable:
  • monitor_name(impl Into<String>) / set_monitor_name(Option<String>):
    required: true
    

    The name identifying the monitor. It can contain only letters, underscores (_), or dashes (-), and can be up to 200 characters.

    
    
  • probes(CreateMonitorProbeInput) / set_probes(Option<Vec::<CreateMonitorProbeInput>>):
    required: false
    

    Displays a list of all of the probes created for a monitor.

    
    
  • aggregation_period(i64) / set_aggregation_period(Option<i64>):
    required: false
    

    The time, in seconds, that metrics are aggregated and sent to Amazon CloudWatch. Valid values are either 30 or 60. 60 is the default if no period is chosen.

    
    
  • client_token(impl Into<String>) / set_client_token(Option<String>):
    required: false
    

    Unique, case-sensitive identifier to ensure the idempotency of the request. Only returned if a client token was provided in the request.

    
    
  • tags(impl Into<String>, impl Into<String>) / set_tags(Option<HashMap::<String, String>>):
    required: false
    

    The list of key-value pairs created and assigned to the monitor.

    
    
• On success, responds with CreateMonitorOutput with field(s):
  • monitor_arn(String):

    The ARN of the monitor.

  • monitor_name(String):

    The name of the monitor.

  • state(MonitorState):

    The state of the monitor.

  • aggregation_period(Option<i64>):

    The number of seconds that metrics are aggregated by and sent to Amazon CloudWatch. This will be either 30 or 60.

  • tags(Option<HashMap::<String, String>>):

    The list of key-value pairs assigned to the monitor.

• On failure, responds with SdkError<CreateMonitorError>

impl Client

pub fn create_probe(&self) -> CreateProbeFluentBuilder

Constructs a fluent builder for the CreateProbe operation.

• The fluent builder is configurable:
  • monitor_name(impl Into<String>) / set_monitor_name(Option<String>):
    required: true
    

    The name of the monitor to associated with the probe.

    
    
  • probe(ProbeInput) / set_probe(Option<ProbeInput>):
    required: true
    

    Describes the details of an individual probe for a monitor.

    
    
  • client_token(impl Into<String>) / set_client_token(Option<String>):
    required: false
    

    Unique, case-sensitive identifier to ensure the idempotency of the request. Only returned if a client token was provided in the request.

    
    
  • tags(impl Into<String>, impl Into<String>) / set_tags(Option<HashMap::<String, String>>):
    required: false
    

    The list of key-value pairs created and assigned to the probe.

    
    
• On success, responds with CreateProbeOutput with field(s):
  • probe_id(Option<String>):

    The ID of the probe for which details are returned.

  • probe_arn(Option<String>):

    The ARN of the probe.

  • source_arn(String):

    The ARN of the probe.

  • destination(String):

    The destination IP address for the monitor. This must be either an IPv4 or IPv6 address.

  • destination_port(Option<i32>):

    The port associated with the destination. This is required only if the protocol is TCP and must be a number between 1 and 65536.

  • protocol(Protocol):

    The protocol used for the network traffic between the source and destination. This must be either TCP or ICMP.

  • packet_size(Option<i32>):

    The size of the packets sent between the source and destination. This must be a number between 56 and 8500.

  • address_family(Option<AddressFamily>):

    Indicates whether the IP address is IPV4 or IPV6.

  • vpc_id(Option<String>):

    The ID of the source VPC or subnet.

  • state(Option<ProbeState>):

    The state of the probe.

  • created_at(Option<DateTime>):

    The time and date that the probe was created.

  • modified_at(Option<DateTime>):

    The time and date when the probe was last modified.

  • tags(Option<HashMap::<String, String>>):

    The list of key-value pairs assigned to the probe.

• On failure, responds with SdkError<CreateProbeError>

impl Client

pub fn delete_monitor(&self) -> DeleteMonitorFluentBuilder

Constructs a fluent builder for the DeleteMonitor operation.

• The fluent builder is configurable:
  • monitor_name(impl Into<String>) / set_monitor_name(Option<String>):
    required: true
    

    The name of the monitor to delete.

    
    
• On success, responds with DeleteMonitorOutput
• On failure, responds with SdkError<DeleteMonitorError>

impl Client

pub fn delete_probe(&self) -> DeleteProbeFluentBuilder

Constructs a fluent builder for the DeleteProbe operation.

• The fluent builder is configurable:
  • monitor_name(impl Into<String>) / set_monitor_name(Option<String>):
    required: true
    

    The name of the monitor to delete.

    
    
  • probe_id(impl Into<String>) / set_probe_id(Option<String>):
    required: true
    

    The ID of the probe to delete.

    
    
• On success, responds with DeleteProbeOutput
• On failure, responds with SdkError<DeleteProbeError>

impl Client

pub fn get_monitor(&self) -> GetMonitorFluentBuilder

Constructs a fluent builder for the GetMonitor operation.

• The fluent builder is configurable:
  • monitor_name(impl Into<String>) / set_monitor_name(Option<String>):
    required: true
    

    The name of the monitor that details are returned for.

    
    
• On success, responds with GetMonitorOutput with field(s):
  • monitor_arn(String):

    The ARN of the selected monitor.

  • monitor_name(String):

    The name of the monitor.

  • state(MonitorState):

    Lists the status of the state of each monitor.

  • aggregation_period(i64):

    The aggregation period for the specified monitor.

  • tags(Option<HashMap::<String, String>>):

    The list of key-value pairs assigned to the monitor.

  • probes(Option<Vec::<Probe>>):

    The details about each probe associated with that monitor.

  • created_at(DateTime):

    The time and date when the monitor was created.

  • modified_at(DateTime):

    The time and date when the monitor was last modified.

• On failure, responds with SdkError<GetMonitorError>

impl Client

pub fn get_probe(&self) -> GetProbeFluentBuilder

Constructs a fluent builder for the GetProbe operation.

• The fluent builder is configurable:
  • monitor_name(impl Into<String>) / set_monitor_name(Option<String>):
    required: true
    

    The name of the monitor associated with the probe. Run ListMonitors to get a list of monitor names.

    
    
  • probe_id(impl Into<String>) / set_probe_id(Option<String>):
    required: true
    

    The ID of the probe to get information about. Run GetMonitor action to get a list of probes and probe IDs for the monitor.

    
    
• On success, responds with GetProbeOutput with field(s):
  • probe_id(Option<String>):

    The ID of the probe for which details are returned.

  • probe_arn(Option<String>):

    The ARN of the probe.

  • source_arn(String):

    The ARN of the probe.

  • destination(String):

    The destination IP address for the monitor. This must be either an IPv4 or IPv6 address.

  • destination_port(Option<i32>):

    The port associated with the destination. This is required only if the protocol is TCP and must be a number between 1 and 65536.

  • protocol(Protocol):

    The protocol used for the network traffic between the source and destination. This must be either TCP or ICMP.

  • packet_size(Option<i32>):

    The size of the packets sent between the source and destination. This must be a number between 56 and 8500.

  • address_family(Option<AddressFamily>):

    Indicates whether the IP address is IPV4 or IPV6.

  • vpc_id(Option<String>):

    The ID of the source VPC or subnet.

  • state(Option<ProbeState>):

    The state of the probe.

  • created_at(Option<DateTime>):

    The time and date that the probe was created.

  • modified_at(Option<DateTime>):

    The time and date that the probe was last modified.

  • tags(Option<HashMap::<String, String>>):

    The list of key-value pairs assigned to the probe.

• On failure, responds with SdkError<GetProbeError>

impl Client

pub fn list_monitors(&self) -> ListMonitorsFluentBuilder

Constructs a fluent builder for the ListMonitors operation. This operation supports pagination; See into_paginator().

• The fluent builder is configurable:
  • next_token(impl Into<String>) / set_next_token(Option<String>):
    required: false
    

    The token for the next page of results.

    
    
  • max_results(i32) / set_max_results(Option<i32>):
    required: false
    

    The maximum number of results to return with a single call. To retrieve the remaining results, make another call with the returned nextToken value.

    If MaxResults is given a value larger than 100, only 100 results are returned.

    
    
  • state(impl Into<String>) / set_state(Option<String>):
    required: false
    

    The list of all monitors and their states.

    
    
• On success, responds with ListMonitorsOutput with field(s):
  • monitors(Vec::<MonitorSummary>):

    Lists individual details about each of your monitors.

  • next_token(Option<String>):

    The token for the next page of results.

• On failure, responds with SdkError<ListMonitorsError>

impl Client

pub fn list_tags_for_resource(&self) -> ListTagsForResourceFluentBuilder

Constructs a fluent builder for the ListTagsForResource operation.

• The fluent builder is configurable:
  • resource_arn(impl Into<String>) / set_resource_arn(Option<String>):
    required: true
    

    The

    
    
• On success, responds with ListTagsForResourceOutput with field(s):
  • tags(Option<HashMap::<String, String>>):

    Lists the tags assigned to the resource.

• On failure, responds with SdkError<ListTagsForResourceError>

impl Client

pub fn tag_resource(&self) -> TagResourceFluentBuilder

Constructs a fluent builder for the TagResource operation.

• The fluent builder is configurable:
  • resource_arn(impl Into<String>) / set_resource_arn(Option<String>):
    required: true
    

    The ARN of the monitor or probe to tag.

    
    
  • tags(impl Into<String>, impl Into<String>) / set_tags(Option<HashMap::<String, String>>):
    required: true
    

    The list of key-value pairs assigned to the monitor or probe.

    
    
• On success, responds with TagResourceOutput
• On failure, responds with SdkError<TagResourceError>

impl Client

pub fn untag_resource(&self) -> UntagResourceFluentBuilder

Constructs a fluent builder for the UntagResource operation.

• The fluent builder is configurable:
  • resource_arn(impl Into<String>) / set_resource_arn(Option<String>):
    required: true
    

    The ARN of the monitor or probe that the tag should be removed from.

    
    
  • tag_keys(impl Into<String>) / set_tag_keys(Option<Vec::<String>>):
    required: true
    

    The key-value pa

    
    
• On success, responds with UntagResourceOutput
• On failure, responds with SdkError<UntagResourceError>

impl Client

pub fn update_monitor(&self) -> UpdateMonitorFluentBuilder

Constructs a fluent builder for the UpdateMonitor operation.

• The fluent builder is configurable:
  • monitor_name(impl Into<String>) / set_monitor_name(Option<String>):
    required: true
    

    The name of the monitor to update.

    
    
  • aggregation_period(i64) / set_aggregation_period(Option<i64>):
    required: true
    

    The aggregation time, in seconds, to change to. This must be either 30 or 60.

    
    
• On success, responds with UpdateMonitorOutput with field(s):
  • monitor_arn(String):

    The ARN of the monitor that was updated.

  • monitor_name(String):

    The name of the monitor that was updated.

  • state(MonitorState):

    The state of the updated monitor.

  • aggregation_period(Option<i64>):

    The changed aggregation period.

  • tags(Option<HashMap::<String, String>>):

    The list of key-value pairs associated with the monitor.

• On failure, responds with SdkError<UpdateMonitorError>

impl Client

pub fn update_probe(&self) -> UpdateProbeFluentBuilder

Constructs a fluent builder for the UpdateProbe operation.

• The fluent builder is configurable:
  • monitor_name(impl Into<String>) / set_monitor_name(Option<String>):
    required: true
    

    The name of the monitor that the probe was updated for.

    
    
  • probe_id(impl Into<String>) / set_probe_id(Option<String>):
    required: true
    

    The ID of the probe to update.

    
    
  • state(ProbeState) / set_state(Option<ProbeState>):
    required: false
    

    The state of the probe update.

    
    
  • destination(impl Into<String>) / set_destination(Option<String>):
    required: false
    

    The updated IP address for the probe destination. This must be either an IPv4 or IPv6 address.

    
    
  • destination_port(i32) / set_destination_port(Option<i32>):
    required: false
    

    The updated port for the probe destination. This is required only if the protocol is TCP and must be a number between 1 and 65536.

    
    
  • protocol(Protocol) / set_protocol(Option<Protocol>):
    required: false
    

    The updated network protocol for the destination. This can be either TCP or ICMP. If the protocol is TCP, then port is also required.

    
    
  • packet_size(i32) / set_packet_size(Option<i32>):
    required: false
    

    he updated packets size for network traffic between the source and destination. This must be a number between 56 and 8500.

    
    
• On success, responds with UpdateProbeOutput with field(s):
  • probe_id(Option<String>):

    The updated ID of the probe.

  • probe_arn(Option<String>):

    The updated ARN of the probe.

  • source_arn(String):

    The updated ARN of the source subnet.

  • destination(String):

    The updated destination IP address for the probe.

  • destination_port(Option<i32>):

    The updated destination port. This must be a number between 1 and 65536.

  • protocol(Protocol):

    The updated protocol for the probe.

  • packet_size(Option<i32>):

    The updated packet size for the probe.

  • address_family(Option<AddressFamily>):

    The updated IP address family. This must be either IPV4 or IPV6.

  • vpc_id(Option<String>):

    The updated ID of the source VPC subnet ID.

  • state(Option<ProbeState>):

    The state of the updated probe.

  • created_at(Option<DateTime>):

    The time and date that the probe was created.

  • modified_at(Option<DateTime>):

    The time and date that the probe was last updated.

  • tags(Option<HashMap::<String, String>>):

    Update tags for a probe.

• On failure, responds with SdkError<UpdateProbeError>

impl Client

pub fn from_conf(conf: Config) -> Self

Creates a new client from the service Config.

Panics

This method will panic in the following cases:

• Retries or timeouts are enabled without a sleep_impl configured.
• Identity caching is enabled without a sleep_impl and time_source configured.
• No behavior_version is provided.

The panic message for each of these will have instructions on how to resolve them.

pub fn config(&self) -> &Config

Returns the client’s configuration.

impl Client

pub fn new(sdk_config: &SdkConfig) -> Self

Creates a new client from an SDK Config.

Panics

• This method will panic if the sdk_config is missing an async sleep implementation. If you experience this panic, set the sleep_impl on the Config passed into this function to fix it.
• This method will panic if the sdk_config is missing an HTTP connector. If you experience this panic, set the http_connector on the Config passed into this function to fix it.
• This method will panic if no BehaviorVersion is provided. If you experience this panic, set behavior_version on the Config or enable the behavior-version-latest Cargo feature.

Trait Implementations

impl Clone for Client

fn clone(&self) -> Client

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for Client

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.