// Code generated by software.amazon.smithy.rust.codegen.smithy-rs. DO NOT EDIT.
pub use crate::operation::create_db_parameter_group::_create_db_parameter_group_output::CreateDbParameterGroupOutputBuilder;

pub use crate::operation::create_db_parameter_group::_create_db_parameter_group_input::CreateDbParameterGroupInputBuilder;

impl CreateDbParameterGroupInputBuilder {
    /// Sends a request with this input using the given client.
    pub async fn send_with(
        self,
        client: &crate::Client,
    ) -> ::std::result::Result<
        crate::operation::create_db_parameter_group::CreateDbParameterGroupOutput,
        ::aws_smithy_runtime_api::client::result::SdkError<
            crate::operation::create_db_parameter_group::CreateDBParameterGroupError,
            ::aws_smithy_runtime_api::client::orchestrator::HttpResponse,
        >,
    > {
        let mut fluent_builder = client.create_db_parameter_group();
        fluent_builder.inner = self;
        fluent_builder.send().await
    }
}
/// Fluent builder constructing a request to `CreateDBParameterGroup`.
///
/// <p>Creates a new DB parameter group.</p>
/// <p>A DB parameter group is initially created with the default parameters for the database engine used by the DB instance. To provide custom values for any of the parameters, you must modify the group after creating it using <i>ModifyDBParameterGroup</i>. Once you've created a DB parameter group, you need to associate it with your DB instance using <i>ModifyDBInstance</i>. When you associate a new DB parameter group with a running DB instance, you need to reboot the DB instance without failover for the new DB parameter group and associated settings to take effect.</p><important>
/// <p>After you create a DB parameter group, you should wait at least 5 minutes before creating your first DB instance that uses that DB parameter group as the default parameter group. This allows Amazon Neptune to fully complete the create action before the parameter group is used as the default for a new DB instance. This is especially important for parameters that are critical when creating the default database for a DB instance, such as the character set for the default database defined by the <code>character_set_database</code> parameter. You can use the <i>Parameter Groups</i> option of the Amazon Neptune console or the <i>DescribeDBParameters</i> command to verify that your DB parameter group has been created or modified.</p>
/// </important>
#[derive(::std::clone::Clone, ::std::fmt::Debug)]
pub struct CreateDBParameterGroupFluentBuilder {
    handle: ::std::sync::Arc<crate::client::Handle>,
    inner: crate::operation::create_db_parameter_group::builders::CreateDbParameterGroupInputBuilder,
    config_override: ::std::option::Option<crate::config::Builder>,
}
impl
    crate::client::customize::internal::CustomizableSend<
        crate::operation::create_db_parameter_group::CreateDbParameterGroupOutput,
        crate::operation::create_db_parameter_group::CreateDBParameterGroupError,
    > for CreateDBParameterGroupFluentBuilder
{
    fn send(
        self,
        config_override: crate::config::Builder,
    ) -> crate::client::customize::internal::BoxFuture<
        crate::client::customize::internal::SendResult<
            crate::operation::create_db_parameter_group::CreateDbParameterGroupOutput,
            crate::operation::create_db_parameter_group::CreateDBParameterGroupError,
        >,
    > {
        ::std::boxed::Box::pin(async move { self.config_override(config_override).send().await })
    }
}
impl CreateDBParameterGroupFluentBuilder {
    /// Creates a new `CreateDBParameterGroup`.
    pub(crate) fn new(handle: ::std::sync::Arc<crate::client::Handle>) -> Self {
        Self {
            handle,
            inner: ::std::default::Default::default(),
            config_override: ::std::option::Option::None,
        }
    }
    /// Access the CreateDBParameterGroup as a reference.
    pub fn as_input(&self) -> &crate::operation::create_db_parameter_group::builders::CreateDbParameterGroupInputBuilder {
        &self.inner
    }
    /// Sends the request and returns the response.
    ///
    /// If an error occurs, an `SdkError` will be returned with additional details that
    /// can be matched against.
    ///
    /// By default, any retryable failures will be retried twice. Retry behavior
    /// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
    /// set when configuring the client.
    pub async fn send(
        self,
    ) -> ::std::result::Result<
        crate::operation::create_db_parameter_group::CreateDbParameterGroupOutput,
        ::aws_smithy_runtime_api::client::result::SdkError<
            crate::operation::create_db_parameter_group::CreateDBParameterGroupError,
            ::aws_smithy_runtime_api::client::orchestrator::HttpResponse,
        >,
    > {
        let input = self
            .inner
            .build()
            .map_err(::aws_smithy_runtime_api::client::result::SdkError::construction_failure)?;
        let runtime_plugins = crate::operation::create_db_parameter_group::CreateDBParameterGroup::operation_runtime_plugins(
            self.handle.runtime_plugins.clone(),
            &self.handle.conf,
            self.config_override,
        );
        crate::operation::create_db_parameter_group::CreateDBParameterGroup::orchestrate(&runtime_plugins, input).await
    }

    /// Consumes this builder, creating a customizable operation that can be modified before being sent.
    pub fn customize(
        self,
    ) -> crate::client::customize::CustomizableOperation<
        crate::operation::create_db_parameter_group::CreateDbParameterGroupOutput,
        crate::operation::create_db_parameter_group::CreateDBParameterGroupError,
        Self,
    > {
        crate::client::customize::CustomizableOperation::new(self)
    }
    pub(crate) fn config_override(mut self, config_override: impl Into<crate::config::Builder>) -> Self {
        self.set_config_override(Some(config_override.into()));
        self
    }

    pub(crate) fn set_config_override(&mut self, config_override: Option<crate::config::Builder>) -> &mut Self {
        self.config_override = config_override;
        self
    }
    /// <p>The name of the DB parameter group.</p>
    /// <p>Constraints:</p>
    /// <ul>
    /// <li>
    /// <p>Must be 1 to 255 letters, numbers, or hyphens.</p></li>
    /// <li>
    /// <p>First character must be a letter</p></li>
    /// <li>
    /// <p>Cannot end with a hyphen or contain two consecutive hyphens</p></li>
    /// </ul><note>
    /// <p>This value is stored as a lowercase string.</p>
    /// </note>
    pub fn db_parameter_group_name(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
        self.inner = self.inner.db_parameter_group_name(input.into());
        self
    }
    /// <p>The name of the DB parameter group.</p>
    /// <p>Constraints:</p>
    /// <ul>
    /// <li>
    /// <p>Must be 1 to 255 letters, numbers, or hyphens.</p></li>
    /// <li>
    /// <p>First character must be a letter</p></li>
    /// <li>
    /// <p>Cannot end with a hyphen or contain two consecutive hyphens</p></li>
    /// </ul><note>
    /// <p>This value is stored as a lowercase string.</p>
    /// </note>
    pub fn set_db_parameter_group_name(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
        self.inner = self.inner.set_db_parameter_group_name(input);
        self
    }
    /// <p>The name of the DB parameter group.</p>
    /// <p>Constraints:</p>
    /// <ul>
    /// <li>
    /// <p>Must be 1 to 255 letters, numbers, or hyphens.</p></li>
    /// <li>
    /// <p>First character must be a letter</p></li>
    /// <li>
    /// <p>Cannot end with a hyphen or contain two consecutive hyphens</p></li>
    /// </ul><note>
    /// <p>This value is stored as a lowercase string.</p>
    /// </note>
    pub fn get_db_parameter_group_name(&self) -> &::std::option::Option<::std::string::String> {
        self.inner.get_db_parameter_group_name()
    }
    /// <p>The DB parameter group family name. A DB parameter group can be associated with one and only one DB parameter group family, and can be applied only to a DB instance running a database engine and engine version compatible with that DB parameter group family.</p>
    pub fn db_parameter_group_family(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
        self.inner = self.inner.db_parameter_group_family(input.into());
        self
    }
    /// <p>The DB parameter group family name. A DB parameter group can be associated with one and only one DB parameter group family, and can be applied only to a DB instance running a database engine and engine version compatible with that DB parameter group family.</p>
    pub fn set_db_parameter_group_family(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
        self.inner = self.inner.set_db_parameter_group_family(input);
        self
    }
    /// <p>The DB parameter group family name. A DB parameter group can be associated with one and only one DB parameter group family, and can be applied only to a DB instance running a database engine and engine version compatible with that DB parameter group family.</p>
    pub fn get_db_parameter_group_family(&self) -> &::std::option::Option<::std::string::String> {
        self.inner.get_db_parameter_group_family()
    }
    /// <p>The description for the DB parameter group.</p>
    pub fn description(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
        self.inner = self.inner.description(input.into());
        self
    }
    /// <p>The description for the DB parameter group.</p>
    pub fn set_description(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
        self.inner = self.inner.set_description(input);
        self
    }
    /// <p>The description for the DB parameter group.</p>
    pub fn get_description(&self) -> &::std::option::Option<::std::string::String> {
        self.inner.get_description()
    }
    /// Appends an item to `Tags`.
    ///
    /// To override the contents of this collection use [`set_tags`](Self::set_tags).
    ///
    /// <p>The tags to be assigned to the new DB parameter group.</p>
    pub fn tags(mut self, input: crate::types::Tag) -> Self {
        self.inner = self.inner.tags(input);
        self
    }
    /// <p>The tags to be assigned to the new DB parameter group.</p>
    pub fn set_tags(mut self, input: ::std::option::Option<::std::vec::Vec<crate::types::Tag>>) -> Self {
        self.inner = self.inner.set_tags(input);
        self
    }
    /// <p>The tags to be assigned to the new DB parameter group.</p>
    pub fn get_tags(&self) -> &::std::option::Option<::std::vec::Vec<crate::types::Tag>> {
        self.inner.get_tags()
    }
}