Struct aws_sdk_mturk::client::Client

pub struct Client<C = DynConnector, M = AwsMiddleware, R = Standard> { /* fields omitted */ }

An ergonomic service client for MTurkRequesterServiceV20170117.

This client allows ergonomic access to a MTurkRequesterServiceV20170117-shaped service. Each method corresponds to an endpoint defined in the service’s Smithy model, and the request and response shapes are auto-generated from that same model.

Using a Client

Once you have a client set up, you can access the service’s endpoints by calling the appropriate method on Client. Each such method returns a request builder for that endpoint, with methods for setting the various fields of the request. Once your request is complete, use the send method to send the request. send returns a future, which you then have to .await to get the service’s response.

Implementations

impl<C, M, R> Client<C, M, R>

pub fn with_config(client: Client<C, M, R>, conf: Config) -> Self

Creates a client with the given service configuration.

pub fn conf(&self) -> &Config

Returns the client’s configuration.

impl<C, M, R> Client<C, M, R> where
    C: SmithyConnector,
    M: SmithyMiddleware<C>,
    R: NewRequestPolicy, 

pub fn accept_qualification_request(
    &self
) -> AcceptQualificationRequest<C, M, R>

Constructs a fluent builder for the AcceptQualificationRequest operation.

See AcceptQualificationRequest for more information about the operation and its arguments.

pub fn approve_assignment(&self) -> ApproveAssignment<C, M, R>

Constructs a fluent builder for the ApproveAssignment operation.

See ApproveAssignment for more information about the operation and its arguments.

pub fn associate_qualification_with_worker(
    &self
) -> AssociateQualificationWithWorker<C, M, R>

Constructs a fluent builder for the AssociateQualificationWithWorker operation.

See AssociateQualificationWithWorker for more information about the operation and its arguments.

pub fn create_additional_assignments_for_hit(
    &self
) -> CreateAdditionalAssignmentsForHIT<C, M, R>

Constructs a fluent builder for the CreateAdditionalAssignmentsForHIT operation.

See CreateAdditionalAssignmentsForHIT for more information about the operation and its arguments.

pub fn create_hit(&self) -> CreateHIT<C, M, R>

Constructs a fluent builder for the CreateHIT operation.

See CreateHIT for more information about the operation and its arguments.

pub fn create_hit_type(&self) -> CreateHITType<C, M, R>

Constructs a fluent builder for the CreateHITType operation.

See CreateHITType for more information about the operation and its arguments.

pub fn create_hit_with_hit_type(&self) -> CreateHITWithHITType<C, M, R>

Constructs a fluent builder for the CreateHITWithHITType operation.

See CreateHITWithHITType for more information about the operation and its arguments.

pub fn create_qualification_type(&self) -> CreateQualificationType<C, M, R>

Constructs a fluent builder for the CreateQualificationType operation.

See CreateQualificationType for more information about the operation and its arguments.

pub fn create_worker_block(&self) -> CreateWorkerBlock<C, M, R>

Constructs a fluent builder for the CreateWorkerBlock operation.

See CreateWorkerBlock for more information about the operation and its arguments.

pub fn delete_hit(&self) -> DeleteHIT<C, M, R>

Constructs a fluent builder for the DeleteHIT operation.

See DeleteHIT for more information about the operation and its arguments.

pub fn delete_qualification_type(&self) -> DeleteQualificationType<C, M, R>

Constructs a fluent builder for the DeleteQualificationType operation.

See DeleteQualificationType for more information about the operation and its arguments.

pub fn delete_worker_block(&self) -> DeleteWorkerBlock<C, M, R>

Constructs a fluent builder for the DeleteWorkerBlock operation.

See DeleteWorkerBlock for more information about the operation and its arguments.

pub fn disassociate_qualification_from_worker(
    &self
) -> DisassociateQualificationFromWorker<C, M, R>

Constructs a fluent builder for the DisassociateQualificationFromWorker operation.

See DisassociateQualificationFromWorker for more information about the operation and its arguments.

pub fn get_account_balance(&self) -> GetAccountBalance<C, M, R>

Constructs a fluent builder for the GetAccountBalance operation.

See GetAccountBalance for more information about the operation and its arguments.

pub fn get_assignment(&self) -> GetAssignment<C, M, R>

Constructs a fluent builder for the GetAssignment operation.

See GetAssignment for more information about the operation and its arguments.

pub fn get_file_upload_url(&self) -> GetFileUploadURL<C, M, R>

Constructs a fluent builder for the GetFileUploadURL operation.

See GetFileUploadURL for more information about the operation and its arguments.

pub fn get_hit(&self) -> GetHIT<C, M, R>

Constructs a fluent builder for the GetHIT operation.

See GetHIT for more information about the operation and its arguments.

pub fn get_qualification_score(&self) -> GetQualificationScore<C, M, R>

Constructs a fluent builder for the GetQualificationScore operation.

See GetQualificationScore for more information about the operation and its arguments.

pub fn get_qualification_type(&self) -> GetQualificationType<C, M, R>

Constructs a fluent builder for the GetQualificationType operation.

See GetQualificationType for more information about the operation and its arguments.

pub fn list_assignments_for_hit(&self) -> ListAssignmentsForHIT<C, M, R>

Constructs a fluent builder for the ListAssignmentsForHIT operation.

See ListAssignmentsForHIT for more information about the operation and its arguments.

pub fn list_bonus_payments(&self) -> ListBonusPayments<C, M, R>

Constructs a fluent builder for the ListBonusPayments operation.

See ListBonusPayments for more information about the operation and its arguments.

pub fn list_hi_ts(&self) -> ListHITs<C, M, R>

Constructs a fluent builder for the ListHITs operation.

See ListHITs for more information about the operation and its arguments.

pub fn list_hi_ts_for_qualification_type(
    &self
) -> ListHITsForQualificationType<C, M, R>

Constructs a fluent builder for the ListHITsForQualificationType operation.

See ListHITsForQualificationType for more information about the operation and its arguments.

pub fn list_qualification_requests(&self) -> ListQualificationRequests<C, M, R>

Constructs a fluent builder for the ListQualificationRequests operation.

See ListQualificationRequests for more information about the operation and its arguments.

pub fn list_qualification_types(&self) -> ListQualificationTypes<C, M, R>

Constructs a fluent builder for the ListQualificationTypes operation.

See ListQualificationTypes for more information about the operation and its arguments.

pub fn list_reviewable_hi_ts(&self) -> ListReviewableHITs<C, M, R>

Constructs a fluent builder for the ListReviewableHITs operation.

See ListReviewableHITs for more information about the operation and its arguments.

pub fn list_review_policy_results_for_hit(
    &self
) -> ListReviewPolicyResultsForHIT<C, M, R>

Constructs a fluent builder for the ListReviewPolicyResultsForHIT operation.

See ListReviewPolicyResultsForHIT for more information about the operation and its arguments.

pub fn list_worker_blocks(&self) -> ListWorkerBlocks<C, M, R>

Constructs a fluent builder for the ListWorkerBlocks operation.

See ListWorkerBlocks for more information about the operation and its arguments.

pub fn list_workers_with_qualification_type(
    &self
) -> ListWorkersWithQualificationType<C, M, R>

Constructs a fluent builder for the ListWorkersWithQualificationType operation.

See ListWorkersWithQualificationType for more information about the operation and its arguments.

pub fn notify_workers(&self) -> NotifyWorkers<C, M, R>

Constructs a fluent builder for the NotifyWorkers operation.

See NotifyWorkers for more information about the operation and its arguments.

pub fn reject_assignment(&self) -> RejectAssignment<C, M, R>

Constructs a fluent builder for the RejectAssignment operation.

See RejectAssignment for more information about the operation and its arguments.

pub fn reject_qualification_request(
    &self
) -> RejectQualificationRequest<C, M, R>

Constructs a fluent builder for the RejectQualificationRequest operation.

See RejectQualificationRequest for more information about the operation and its arguments.

pub fn send_bonus(&self) -> SendBonus<C, M, R>

Constructs a fluent builder for the SendBonus operation.

See SendBonus for more information about the operation and its arguments.

pub fn send_test_event_notification(&self) -> SendTestEventNotification<C, M, R>

Constructs a fluent builder for the SendTestEventNotification operation.

See SendTestEventNotification for more information about the operation and its arguments.

pub fn update_expiration_for_hit(&self) -> UpdateExpirationForHIT<C, M, R>

Constructs a fluent builder for the UpdateExpirationForHIT operation.

See UpdateExpirationForHIT for more information about the operation and its arguments.

pub fn update_hit_review_status(&self) -> UpdateHITReviewStatus<C, M, R>

Constructs a fluent builder for the UpdateHITReviewStatus operation.

See UpdateHITReviewStatus for more information about the operation and its arguments.

pub fn update_hit_type_of_hit(&self) -> UpdateHITTypeOfHIT<C, M, R>

Constructs a fluent builder for the UpdateHITTypeOfHIT operation.

See UpdateHITTypeOfHIT for more information about the operation and its arguments.

pub fn update_notification_settings(
    &self
) -> UpdateNotificationSettings<C, M, R>

Constructs a fluent builder for the UpdateNotificationSettings operation.

See UpdateNotificationSettings for more information about the operation and its arguments.

pub fn update_qualification_type(&self) -> UpdateQualificationType<C, M, R>

Constructs a fluent builder for the UpdateQualificationType operation.

See UpdateQualificationType for more information about the operation and its arguments.

impl<C> Client<C, AwsMiddleware, Standard>

pub fn from_conf_conn(conf: Config, conn: C) -> Self

Creates a client with the given service config and connector override.

impl Client<DynConnector, AwsMiddleware, Standard>

pub fn new(config: &Config) -> Self

Creates a new client from a shared config.

pub fn from_conf(conf: Config) -> Self

Creates a new client from the service Config.

Trait Implementations

impl<C, M, R> Clone for Client<C, M, R>

fn clone(&self) -> Self

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl<C: Debug, M: Debug, R: Debug> Debug for Client<C, M, R>

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl<C, M, R> From<Client<C, M, R>> for Client<C, M, R>

fn from(client: Client<C, M, R>) -> Self

Performs the conversion.