1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642 643 644 645 646 647 648 649 650 651 652 653 654 655 656 657 658 659 660 661 662 663 664 665 666 667 668 669 670 671 672 673 674 675 676 677 678 679 680 681 682 683 684 685 686 687 688 689 690 691 692 693 694 695 696 697 698 699 700 701 702 703 704 705 706 707 708 709 710 711 712 713 714 715 716 717 718 719 720 721 722 723 724 725 726 727 728 729 730 731 732 733 734 735 736 737 738 739 740 741 742 743 744 745 746 747 748 749 750 751 752 753 754 755 756 757 758 759 760 761 762 763 764 765 766 767 768 769 770 771 772 773 774 775 776 777 778 779 780 781 782 783 784 785 786 787 788 789 790 791 792 793 794 795 796 797 798 799 800 801 802 803 804 805 806 807 808 809 810 811 812 813 814 815 816 817 818 819 820 821 822 823 824 825 826 827 828 829 830 831 832 833 834 835 836 837 838 839 840 841 842 843 844 845 846 847 848 849 850 851 852 853 854 855 856 857 858 859 860 861 862 863 864 865 866 867 868 869 870 871 872 873 874 875 876 877 878 879 880 881 882 883 884 885 886 887 888 889 890 891 892 893 894 895 896 897 898 899 900 901 902 903 904 905 906 907 908 909 910 911 912 913 914 915 916 917 918 919 920 921 922 923 924 925 926 927 928 929 930 931 932 933 934 935 936 937 938 939 940 941 942 943 944 945 946 947 948 949 950 951 952 953 954 955 956 957 958 959 960 961 962 963 964 965 966 967 968 969 970 971 972 973 974 975 976 977 978 979 980 981 982 983 984 985 986 987 988 989 990 991 992 993 994 995 996 997 998 999 1000 1001 1002 1003 1004 1005 1006 1007 1008 1009 1010 1011 1012 1013 1014 1015 1016 1017 1018 1019 1020 1021 1022 1023 1024 1025 1026 1027 1028 1029 1030 1031 1032 1033 1034 1035 1036 1037 1038 1039 1040 1041 1042 1043 1044 1045 1046 1047 1048 1049 1050 1051
// Code generated by software.amazon.smithy.rust.codegen.smithy-rs. DO NOT EDIT.
#[derive(Debug)]
pub(crate) struct Handle {
pub(crate) client: aws_smithy_client::Client<
aws_smithy_client::erase::DynConnector,
aws_smithy_client::erase::DynMiddleware<aws_smithy_client::erase::DynConnector>,
>,
pub(crate) conf: crate::Config,
}
/// Client for AWS Mobile
///
/// Client for invoking operations on AWS Mobile. Each operation on AWS Mobile is a method on this
/// this struct. `.send()` MUST be invoked on the generated operations to dispatch the request to the service.
///
/// # Examples
/// **Constructing a client and invoking an operation**
/// ```rust,no_run
/// # async fn docs() {
/// // create a shared configuration. This can be used & shared between multiple service clients.
/// let shared_config = aws_config::load_from_env().await;
/// let client = aws_sdk_mobile::Client::new(&shared_config);
/// // invoke an operation
/// /* let rsp = client
/// .<operation_name>().
/// .<param>("some value")
/// .send().await; */
/// # }
/// ```
/// **Constructing a client with custom configuration**
/// ```rust,no_run
/// use aws_config::retry::RetryConfig;
/// # async fn docs() {
/// let shared_config = aws_config::load_from_env().await;
/// let config = aws_sdk_mobile::config::Builder::from(&shared_config)
/// .retry_config(RetryConfig::disabled())
/// .build();
/// let client = aws_sdk_mobile::Client::from_conf(config);
/// # }
#[derive(std::fmt::Debug)]
pub struct Client {
handle: std::sync::Arc<Handle>,
}
impl std::clone::Clone for Client {
fn clone(&self) -> Self {
Self {
handle: self.handle.clone(),
}
}
}
#[doc(inline)]
pub use aws_smithy_client::Builder;
impl
From<
aws_smithy_client::Client<
aws_smithy_client::erase::DynConnector,
aws_smithy_client::erase::DynMiddleware<aws_smithy_client::erase::DynConnector>,
>,
> for Client
{
fn from(
client: aws_smithy_client::Client<
aws_smithy_client::erase::DynConnector,
aws_smithy_client::erase::DynMiddleware<aws_smithy_client::erase::DynConnector>,
>,
) -> Self {
Self::with_config(client, crate::Config::builder().build())
}
}
impl Client {
/// Creates a client with the given service configuration.
pub fn with_config(
client: aws_smithy_client::Client<
aws_smithy_client::erase::DynConnector,
aws_smithy_client::erase::DynMiddleware<aws_smithy_client::erase::DynConnector>,
>,
conf: crate::Config,
) -> Self {
Self {
handle: std::sync::Arc::new(Handle { client, conf }),
}
}
/// Returns the client's configuration.
pub fn conf(&self) -> &crate::Config {
&self.handle.conf
}
}
impl Client {
/// Constructs a fluent builder for the [`CreateProject`](crate::client::fluent_builders::CreateProject) operation.
///
/// - The fluent builder is configurable:
/// - [`name(impl Into<String>)`](crate::client::fluent_builders::CreateProject::name) / [`set_name(Option<String>)`](crate::client::fluent_builders::CreateProject::set_name): <p> Name of the project. </p>
/// - [`region(impl Into<String>)`](crate::client::fluent_builders::CreateProject::region) / [`set_region(Option<String>)`](crate::client::fluent_builders::CreateProject::set_region): <p> Default region where project resources should be created. </p>
/// - [`contents(Blob)`](crate::client::fluent_builders::CreateProject::contents) / [`set_contents(Option<Blob>)`](crate::client::fluent_builders::CreateProject::set_contents): <p> ZIP or YAML file which contains configuration settings to be used when creating the project. This may be the contents of the file downloaded from the URL provided in an export project operation. </p>
/// - [`snapshot_id(impl Into<String>)`](crate::client::fluent_builders::CreateProject::snapshot_id) / [`set_snapshot_id(Option<String>)`](crate::client::fluent_builders::CreateProject::set_snapshot_id): <p> Unique identifier for an exported snapshot of project configuration. This snapshot identifier is included in the share URL when a project is exported. </p>
/// - On success, responds with [`CreateProjectOutput`](crate::output::CreateProjectOutput) with field(s):
/// - [`details(Option<ProjectDetails>)`](crate::output::CreateProjectOutput::details): <p> Detailed information about the created AWS Mobile Hub project. </p>
/// - On failure, responds with [`SdkError<CreateProjectError>`](crate::error::CreateProjectError)
pub fn create_project(&self) -> fluent_builders::CreateProject {
fluent_builders::CreateProject::new(self.handle.clone())
}
/// Constructs a fluent builder for the [`DeleteProject`](crate::client::fluent_builders::DeleteProject) operation.
///
/// - The fluent builder is configurable:
/// - [`project_id(impl Into<String>)`](crate::client::fluent_builders::DeleteProject::project_id) / [`set_project_id(Option<String>)`](crate::client::fluent_builders::DeleteProject::set_project_id): <p> Unique project identifier. </p>
/// - On success, responds with [`DeleteProjectOutput`](crate::output::DeleteProjectOutput) with field(s):
/// - [`deleted_resources(Option<Vec<Resource>>)`](crate::output::DeleteProjectOutput::deleted_resources): <p> Resources which were deleted. </p>
/// - [`orphaned_resources(Option<Vec<Resource>>)`](crate::output::DeleteProjectOutput::orphaned_resources): <p> Resources which were not deleted, due to a risk of losing potentially important data or files. </p>
/// - On failure, responds with [`SdkError<DeleteProjectError>`](crate::error::DeleteProjectError)
pub fn delete_project(&self) -> fluent_builders::DeleteProject {
fluent_builders::DeleteProject::new(self.handle.clone())
}
/// Constructs a fluent builder for the [`DescribeBundle`](crate::client::fluent_builders::DescribeBundle) operation.
///
/// - The fluent builder is configurable:
/// - [`bundle_id(impl Into<String>)`](crate::client::fluent_builders::DescribeBundle::bundle_id) / [`set_bundle_id(Option<String>)`](crate::client::fluent_builders::DescribeBundle::set_bundle_id): <p> Unique bundle identifier. </p>
/// - On success, responds with [`DescribeBundleOutput`](crate::output::DescribeBundleOutput) with field(s):
/// - [`details(Option<BundleDetails>)`](crate::output::DescribeBundleOutput::details): <p> The details of the bundle. </p>
/// - On failure, responds with [`SdkError<DescribeBundleError>`](crate::error::DescribeBundleError)
pub fn describe_bundle(&self) -> fluent_builders::DescribeBundle {
fluent_builders::DescribeBundle::new(self.handle.clone())
}
/// Constructs a fluent builder for the [`DescribeProject`](crate::client::fluent_builders::DescribeProject) operation.
///
/// - The fluent builder is configurable:
/// - [`project_id(impl Into<String>)`](crate::client::fluent_builders::DescribeProject::project_id) / [`set_project_id(Option<String>)`](crate::client::fluent_builders::DescribeProject::set_project_id): <p> Unique project identifier. </p>
/// - [`sync_from_resources(bool)`](crate::client::fluent_builders::DescribeProject::sync_from_resources) / [`set_sync_from_resources(bool)`](crate::client::fluent_builders::DescribeProject::set_sync_from_resources): <p> If set to true, causes AWS Mobile Hub to synchronize information from other services, e.g., update state of AWS CloudFormation stacks in the AWS Mobile Hub project. </p>
/// - On success, responds with [`DescribeProjectOutput`](crate::output::DescribeProjectOutput) with field(s):
/// - [`details(Option<ProjectDetails>)`](crate::output::DescribeProjectOutput::details): <p> Detailed information about an AWS Mobile Hub project. </p>
/// - On failure, responds with [`SdkError<DescribeProjectError>`](crate::error::DescribeProjectError)
pub fn describe_project(&self) -> fluent_builders::DescribeProject {
fluent_builders::DescribeProject::new(self.handle.clone())
}
/// Constructs a fluent builder for the [`ExportBundle`](crate::client::fluent_builders::ExportBundle) operation.
///
/// - The fluent builder is configurable:
/// - [`bundle_id(impl Into<String>)`](crate::client::fluent_builders::ExportBundle::bundle_id) / [`set_bundle_id(Option<String>)`](crate::client::fluent_builders::ExportBundle::set_bundle_id): <p> Unique bundle identifier. </p>
/// - [`project_id(impl Into<String>)`](crate::client::fluent_builders::ExportBundle::project_id) / [`set_project_id(Option<String>)`](crate::client::fluent_builders::ExportBundle::set_project_id): <p> Unique project identifier. </p>
/// - [`platform(Platform)`](crate::client::fluent_builders::ExportBundle::platform) / [`set_platform(Option<Platform>)`](crate::client::fluent_builders::ExportBundle::set_platform): <p> Developer desktop or target application platform. </p>
/// - On success, responds with [`ExportBundleOutput`](crate::output::ExportBundleOutput) with field(s):
/// - [`download_url(Option<String>)`](crate::output::ExportBundleOutput::download_url): <p> URL which contains the custom-generated SDK and tool packages used to integrate the client mobile app or web app with the AWS resources created by the AWS Mobile Hub project. </p>
/// - On failure, responds with [`SdkError<ExportBundleError>`](crate::error::ExportBundleError)
pub fn export_bundle(&self) -> fluent_builders::ExportBundle {
fluent_builders::ExportBundle::new(self.handle.clone())
}
/// Constructs a fluent builder for the [`ExportProject`](crate::client::fluent_builders::ExportProject) operation.
///
/// - The fluent builder is configurable:
/// - [`project_id(impl Into<String>)`](crate::client::fluent_builders::ExportProject::project_id) / [`set_project_id(Option<String>)`](crate::client::fluent_builders::ExportProject::set_project_id): <p> Unique project identifier. </p>
/// - On success, responds with [`ExportProjectOutput`](crate::output::ExportProjectOutput) with field(s):
/// - [`download_url(Option<String>)`](crate::output::ExportProjectOutput::download_url): <p> URL which can be used to download the exported project configuation file(s). </p>
/// - [`share_url(Option<String>)`](crate::output::ExportProjectOutput::share_url): <p> URL which can be shared to allow other AWS users to create their own project in AWS Mobile Hub with the same configuration as the specified project. This URL pertains to a snapshot in time of the project configuration that is created when this API is called. If you want to share additional changes to your project configuration, then you will need to create and share a new snapshot by calling this method again. </p>
/// - [`snapshot_id(Option<String>)`](crate::output::ExportProjectOutput::snapshot_id): <p> Unique identifier for the exported snapshot of the project configuration. This snapshot identifier is included in the share URL. </p>
/// - On failure, responds with [`SdkError<ExportProjectError>`](crate::error::ExportProjectError)
pub fn export_project(&self) -> fluent_builders::ExportProject {
fluent_builders::ExportProject::new(self.handle.clone())
}
/// Constructs a fluent builder for the [`ListBundles`](crate::client::fluent_builders::ListBundles) operation.
/// This operation supports pagination; See [`into_paginator()`](crate::client::fluent_builders::ListBundles::into_paginator).
///
/// - The fluent builder is configurable:
/// - [`max_results(i32)`](crate::client::fluent_builders::ListBundles::max_results) / [`set_max_results(i32)`](crate::client::fluent_builders::ListBundles::set_max_results): <p> Maximum number of records to list in a single response. </p>
/// - [`next_token(impl Into<String>)`](crate::client::fluent_builders::ListBundles::next_token) / [`set_next_token(Option<String>)`](crate::client::fluent_builders::ListBundles::set_next_token): <p> Pagination token. Set to null to start listing bundles from start. If non-null pagination token is returned in a result, then pass its value in here in another request to list more bundles. </p>
/// - On success, responds with [`ListBundlesOutput`](crate::output::ListBundlesOutput) with field(s):
/// - [`bundle_list(Option<Vec<BundleDetails>>)`](crate::output::ListBundlesOutput::bundle_list): <p> A list of bundles. </p>
/// - [`next_token(Option<String>)`](crate::output::ListBundlesOutput::next_token): <p> Pagination token. If non-null pagination token is returned in a result, then pass its value in another request to fetch more entries. </p>
/// - On failure, responds with [`SdkError<ListBundlesError>`](crate::error::ListBundlesError)
pub fn list_bundles(&self) -> fluent_builders::ListBundles {
fluent_builders::ListBundles::new(self.handle.clone())
}
/// Constructs a fluent builder for the [`ListProjects`](crate::client::fluent_builders::ListProjects) operation.
/// This operation supports pagination; See [`into_paginator()`](crate::client::fluent_builders::ListProjects::into_paginator).
///
/// - The fluent builder is configurable:
/// - [`max_results(i32)`](crate::client::fluent_builders::ListProjects::max_results) / [`set_max_results(i32)`](crate::client::fluent_builders::ListProjects::set_max_results): <p> Maximum number of records to list in a single response. </p>
/// - [`next_token(impl Into<String>)`](crate::client::fluent_builders::ListProjects::next_token) / [`set_next_token(Option<String>)`](crate::client::fluent_builders::ListProjects::set_next_token): <p> Pagination token. Set to null to start listing projects from start. If non-null pagination token is returned in a result, then pass its value in here in another request to list more projects. </p>
/// - On success, responds with [`ListProjectsOutput`](crate::output::ListProjectsOutput) with field(s):
/// - [`projects(Option<Vec<ProjectSummary>>)`](crate::output::ListProjectsOutput::projects): <p> List of projects. </p>
/// - [`next_token(Option<String>)`](crate::output::ListProjectsOutput::next_token): <p> Pagination token. Set to null to start listing records from start. If non-null pagination token is returned in a result, then pass its value in here in another request to list more entries. </p>
/// - On failure, responds with [`SdkError<ListProjectsError>`](crate::error::ListProjectsError)
pub fn list_projects(&self) -> fluent_builders::ListProjects {
fluent_builders::ListProjects::new(self.handle.clone())
}
/// Constructs a fluent builder for the [`UpdateProject`](crate::client::fluent_builders::UpdateProject) operation.
///
/// - The fluent builder is configurable:
/// - [`contents(Blob)`](crate::client::fluent_builders::UpdateProject::contents) / [`set_contents(Option<Blob>)`](crate::client::fluent_builders::UpdateProject::set_contents): <p> ZIP or YAML file which contains project configuration to be updated. This should be the contents of the file downloaded from the URL provided in an export project operation. </p>
/// - [`project_id(impl Into<String>)`](crate::client::fluent_builders::UpdateProject::project_id) / [`set_project_id(Option<String>)`](crate::client::fluent_builders::UpdateProject::set_project_id): <p> Unique project identifier. </p>
/// - On success, responds with [`UpdateProjectOutput`](crate::output::UpdateProjectOutput) with field(s):
/// - [`details(Option<ProjectDetails>)`](crate::output::UpdateProjectOutput::details): <p> Detailed information about the updated AWS Mobile Hub project. </p>
/// - On failure, responds with [`SdkError<UpdateProjectError>`](crate::error::UpdateProjectError)
pub fn update_project(&self) -> fluent_builders::UpdateProject {
fluent_builders::UpdateProject::new(self.handle.clone())
}
}
pub mod fluent_builders {
//! Utilities to ergonomically construct a request to the service.
//!
//! Fluent builders are created through the [`Client`](crate::client::Client) by calling
//! one if its operation methods. After parameters are set using the builder methods,
//! the `send` method can be called to initiate the request.
/// Fluent builder constructing a request to `CreateProject`.
///
/// <p> Creates an AWS Mobile Hub project. </p>
#[derive(std::clone::Clone, std::fmt::Debug)]
pub struct CreateProject {
handle: std::sync::Arc<super::Handle>,
inner: crate::input::create_project_input::Builder,
}
impl CreateProject {
/// Creates a new `CreateProject`.
pub(crate) fn new(handle: std::sync::Arc<super::Handle>) -> Self {
Self {
handle,
inner: Default::default(),
}
}
/// Consume this builder, creating a customizable operation that can be modified before being
/// sent. The operation's inner [http::Request] can be modified as well.
pub async fn customize(
self,
) -> std::result::Result<
crate::operation::customize::CustomizableOperation<
crate::operation::CreateProject,
aws_http::retry::AwsResponseRetryClassifier,
>,
aws_smithy_http::result::SdkError<crate::error::CreateProjectError>,
> {
let handle = self.handle.clone();
let operation = self
.inner
.build()
.map_err(aws_smithy_http::result::SdkError::construction_failure)?
.make_operation(&handle.conf)
.await
.map_err(aws_smithy_http::result::SdkError::construction_failure)?;
Ok(crate::operation::customize::CustomizableOperation { handle, operation })
}
/// Sends the request and returns the response.
///
/// If an error occurs, an `SdkError` will be returned with additional details that
/// can be matched against.
///
/// By default, any retryable failures will be retried twice. Retry behavior
/// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
/// set when configuring the client.
pub async fn send(
self,
) -> std::result::Result<
crate::output::CreateProjectOutput,
aws_smithy_http::result::SdkError<crate::error::CreateProjectError>,
> {
let op = self
.inner
.build()
.map_err(aws_smithy_http::result::SdkError::construction_failure)?
.make_operation(&self.handle.conf)
.await
.map_err(aws_smithy_http::result::SdkError::construction_failure)?;
self.handle.client.call(op).await
}
/// <p> Name of the project. </p>
pub fn name(mut self, input: impl Into<std::string::String>) -> Self {
self.inner = self.inner.name(input.into());
self
}
/// <p> Name of the project. </p>
pub fn set_name(mut self, input: std::option::Option<std::string::String>) -> Self {
self.inner = self.inner.set_name(input);
self
}
/// <p> Default region where project resources should be created. </p>
pub fn region(mut self, input: impl Into<std::string::String>) -> Self {
self.inner = self.inner.region(input.into());
self
}
/// <p> Default region where project resources should be created. </p>
pub fn set_region(mut self, input: std::option::Option<std::string::String>) -> Self {
self.inner = self.inner.set_region(input);
self
}
/// <p> ZIP or YAML file which contains configuration settings to be used when creating the project. This may be the contents of the file downloaded from the URL provided in an export project operation. </p>
pub fn contents(mut self, input: aws_smithy_types::Blob) -> Self {
self.inner = self.inner.contents(input);
self
}
/// <p> ZIP or YAML file which contains configuration settings to be used when creating the project. This may be the contents of the file downloaded from the URL provided in an export project operation. </p>
pub fn set_contents(mut self, input: std::option::Option<aws_smithy_types::Blob>) -> Self {
self.inner = self.inner.set_contents(input);
self
}
/// <p> Unique identifier for an exported snapshot of project configuration. This snapshot identifier is included in the share URL when a project is exported. </p>
pub fn snapshot_id(mut self, input: impl Into<std::string::String>) -> Self {
self.inner = self.inner.snapshot_id(input.into());
self
}
/// <p> Unique identifier for an exported snapshot of project configuration. This snapshot identifier is included in the share URL when a project is exported. </p>
pub fn set_snapshot_id(mut self, input: std::option::Option<std::string::String>) -> Self {
self.inner = self.inner.set_snapshot_id(input);
self
}
}
/// Fluent builder constructing a request to `DeleteProject`.
///
/// <p> Delets a project in AWS Mobile Hub. </p>
#[derive(std::clone::Clone, std::fmt::Debug)]
pub struct DeleteProject {
handle: std::sync::Arc<super::Handle>,
inner: crate::input::delete_project_input::Builder,
}
impl DeleteProject {
/// Creates a new `DeleteProject`.
pub(crate) fn new(handle: std::sync::Arc<super::Handle>) -> Self {
Self {
handle,
inner: Default::default(),
}
}
/// Consume this builder, creating a customizable operation that can be modified before being
/// sent. The operation's inner [http::Request] can be modified as well.
pub async fn customize(
self,
) -> std::result::Result<
crate::operation::customize::CustomizableOperation<
crate::operation::DeleteProject,
aws_http::retry::AwsResponseRetryClassifier,
>,
aws_smithy_http::result::SdkError<crate::error::DeleteProjectError>,
> {
let handle = self.handle.clone();
let operation = self
.inner
.build()
.map_err(aws_smithy_http::result::SdkError::construction_failure)?
.make_operation(&handle.conf)
.await
.map_err(aws_smithy_http::result::SdkError::construction_failure)?;
Ok(crate::operation::customize::CustomizableOperation { handle, operation })
}
/// Sends the request and returns the response.
///
/// If an error occurs, an `SdkError` will be returned with additional details that
/// can be matched against.
///
/// By default, any retryable failures will be retried twice. Retry behavior
/// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
/// set when configuring the client.
pub async fn send(
self,
) -> std::result::Result<
crate::output::DeleteProjectOutput,
aws_smithy_http::result::SdkError<crate::error::DeleteProjectError>,
> {
let op = self
.inner
.build()
.map_err(aws_smithy_http::result::SdkError::construction_failure)?
.make_operation(&self.handle.conf)
.await
.map_err(aws_smithy_http::result::SdkError::construction_failure)?;
self.handle.client.call(op).await
}
/// <p> Unique project identifier. </p>
pub fn project_id(mut self, input: impl Into<std::string::String>) -> Self {
self.inner = self.inner.project_id(input.into());
self
}
/// <p> Unique project identifier. </p>
pub fn set_project_id(mut self, input: std::option::Option<std::string::String>) -> Self {
self.inner = self.inner.set_project_id(input);
self
}
}
/// Fluent builder constructing a request to `DescribeBundle`.
///
/// <p> Get the bundle details for the requested bundle id. </p>
#[derive(std::clone::Clone, std::fmt::Debug)]
pub struct DescribeBundle {
handle: std::sync::Arc<super::Handle>,
inner: crate::input::describe_bundle_input::Builder,
}
impl DescribeBundle {
/// Creates a new `DescribeBundle`.
pub(crate) fn new(handle: std::sync::Arc<super::Handle>) -> Self {
Self {
handle,
inner: Default::default(),
}
}
/// Consume this builder, creating a customizable operation that can be modified before being
/// sent. The operation's inner [http::Request] can be modified as well.
pub async fn customize(
self,
) -> std::result::Result<
crate::operation::customize::CustomizableOperation<
crate::operation::DescribeBundle,
aws_http::retry::AwsResponseRetryClassifier,
>,
aws_smithy_http::result::SdkError<crate::error::DescribeBundleError>,
> {
let handle = self.handle.clone();
let operation = self
.inner
.build()
.map_err(aws_smithy_http::result::SdkError::construction_failure)?
.make_operation(&handle.conf)
.await
.map_err(aws_smithy_http::result::SdkError::construction_failure)?;
Ok(crate::operation::customize::CustomizableOperation { handle, operation })
}
/// Sends the request and returns the response.
///
/// If an error occurs, an `SdkError` will be returned with additional details that
/// can be matched against.
///
/// By default, any retryable failures will be retried twice. Retry behavior
/// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
/// set when configuring the client.
pub async fn send(
self,
) -> std::result::Result<
crate::output::DescribeBundleOutput,
aws_smithy_http::result::SdkError<crate::error::DescribeBundleError>,
> {
let op = self
.inner
.build()
.map_err(aws_smithy_http::result::SdkError::construction_failure)?
.make_operation(&self.handle.conf)
.await
.map_err(aws_smithy_http::result::SdkError::construction_failure)?;
self.handle.client.call(op).await
}
/// <p> Unique bundle identifier. </p>
pub fn bundle_id(mut self, input: impl Into<std::string::String>) -> Self {
self.inner = self.inner.bundle_id(input.into());
self
}
/// <p> Unique bundle identifier. </p>
pub fn set_bundle_id(mut self, input: std::option::Option<std::string::String>) -> Self {
self.inner = self.inner.set_bundle_id(input);
self
}
}
/// Fluent builder constructing a request to `DescribeProject`.
///
/// <p> Gets details about a project in AWS Mobile Hub. </p>
#[derive(std::clone::Clone, std::fmt::Debug)]
pub struct DescribeProject {
handle: std::sync::Arc<super::Handle>,
inner: crate::input::describe_project_input::Builder,
}
impl DescribeProject {
/// Creates a new `DescribeProject`.
pub(crate) fn new(handle: std::sync::Arc<super::Handle>) -> Self {
Self {
handle,
inner: Default::default(),
}
}
/// Consume this builder, creating a customizable operation that can be modified before being
/// sent. The operation's inner [http::Request] can be modified as well.
pub async fn customize(
self,
) -> std::result::Result<
crate::operation::customize::CustomizableOperation<
crate::operation::DescribeProject,
aws_http::retry::AwsResponseRetryClassifier,
>,
aws_smithy_http::result::SdkError<crate::error::DescribeProjectError>,
> {
let handle = self.handle.clone();
let operation = self
.inner
.build()
.map_err(aws_smithy_http::result::SdkError::construction_failure)?
.make_operation(&handle.conf)
.await
.map_err(aws_smithy_http::result::SdkError::construction_failure)?;
Ok(crate::operation::customize::CustomizableOperation { handle, operation })
}
/// Sends the request and returns the response.
///
/// If an error occurs, an `SdkError` will be returned with additional details that
/// can be matched against.
///
/// By default, any retryable failures will be retried twice. Retry behavior
/// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
/// set when configuring the client.
pub async fn send(
self,
) -> std::result::Result<
crate::output::DescribeProjectOutput,
aws_smithy_http::result::SdkError<crate::error::DescribeProjectError>,
> {
let op = self
.inner
.build()
.map_err(aws_smithy_http::result::SdkError::construction_failure)?
.make_operation(&self.handle.conf)
.await
.map_err(aws_smithy_http::result::SdkError::construction_failure)?;
self.handle.client.call(op).await
}
/// <p> Unique project identifier. </p>
pub fn project_id(mut self, input: impl Into<std::string::String>) -> Self {
self.inner = self.inner.project_id(input.into());
self
}
/// <p> Unique project identifier. </p>
pub fn set_project_id(mut self, input: std::option::Option<std::string::String>) -> Self {
self.inner = self.inner.set_project_id(input);
self
}
/// <p> If set to true, causes AWS Mobile Hub to synchronize information from other services, e.g., update state of AWS CloudFormation stacks in the AWS Mobile Hub project. </p>
pub fn sync_from_resources(mut self, input: bool) -> Self {
self.inner = self.inner.sync_from_resources(input);
self
}
/// <p> If set to true, causes AWS Mobile Hub to synchronize information from other services, e.g., update state of AWS CloudFormation stacks in the AWS Mobile Hub project. </p>
pub fn set_sync_from_resources(mut self, input: std::option::Option<bool>) -> Self {
self.inner = self.inner.set_sync_from_resources(input);
self
}
}
/// Fluent builder constructing a request to `ExportBundle`.
///
/// <p> Generates customized software development kit (SDK) and or tool packages used to integrate mobile web or mobile app clients with backend AWS resources. </p>
#[derive(std::clone::Clone, std::fmt::Debug)]
pub struct ExportBundle {
handle: std::sync::Arc<super::Handle>,
inner: crate::input::export_bundle_input::Builder,
}
impl ExportBundle {
/// Creates a new `ExportBundle`.
pub(crate) fn new(handle: std::sync::Arc<super::Handle>) -> Self {
Self {
handle,
inner: Default::default(),
}
}
/// Consume this builder, creating a customizable operation that can be modified before being
/// sent. The operation's inner [http::Request] can be modified as well.
pub async fn customize(
self,
) -> std::result::Result<
crate::operation::customize::CustomizableOperation<
crate::operation::ExportBundle,
aws_http::retry::AwsResponseRetryClassifier,
>,
aws_smithy_http::result::SdkError<crate::error::ExportBundleError>,
> {
let handle = self.handle.clone();
let operation = self
.inner
.build()
.map_err(aws_smithy_http::result::SdkError::construction_failure)?
.make_operation(&handle.conf)
.await
.map_err(aws_smithy_http::result::SdkError::construction_failure)?;
Ok(crate::operation::customize::CustomizableOperation { handle, operation })
}
/// Sends the request and returns the response.
///
/// If an error occurs, an `SdkError` will be returned with additional details that
/// can be matched against.
///
/// By default, any retryable failures will be retried twice. Retry behavior
/// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
/// set when configuring the client.
pub async fn send(
self,
) -> std::result::Result<
crate::output::ExportBundleOutput,
aws_smithy_http::result::SdkError<crate::error::ExportBundleError>,
> {
let op = self
.inner
.build()
.map_err(aws_smithy_http::result::SdkError::construction_failure)?
.make_operation(&self.handle.conf)
.await
.map_err(aws_smithy_http::result::SdkError::construction_failure)?;
self.handle.client.call(op).await
}
/// <p> Unique bundle identifier. </p>
pub fn bundle_id(mut self, input: impl Into<std::string::String>) -> Self {
self.inner = self.inner.bundle_id(input.into());
self
}
/// <p> Unique bundle identifier. </p>
pub fn set_bundle_id(mut self, input: std::option::Option<std::string::String>) -> Self {
self.inner = self.inner.set_bundle_id(input);
self
}
/// <p> Unique project identifier. </p>
pub fn project_id(mut self, input: impl Into<std::string::String>) -> Self {
self.inner = self.inner.project_id(input.into());
self
}
/// <p> Unique project identifier. </p>
pub fn set_project_id(mut self, input: std::option::Option<std::string::String>) -> Self {
self.inner = self.inner.set_project_id(input);
self
}
/// <p> Developer desktop or target application platform. </p>
pub fn platform(mut self, input: crate::model::Platform) -> Self {
self.inner = self.inner.platform(input);
self
}
/// <p> Developer desktop or target application platform. </p>
pub fn set_platform(mut self, input: std::option::Option<crate::model::Platform>) -> Self {
self.inner = self.inner.set_platform(input);
self
}
}
/// Fluent builder constructing a request to `ExportProject`.
///
/// <p> Exports project configuration to a snapshot which can be downloaded and shared. Note that mobile app push credentials are encrypted in exported projects, so they can only be shared successfully within the same AWS account. </p>
#[derive(std::clone::Clone, std::fmt::Debug)]
pub struct ExportProject {
handle: std::sync::Arc<super::Handle>,
inner: crate::input::export_project_input::Builder,
}
impl ExportProject {
/// Creates a new `ExportProject`.
pub(crate) fn new(handle: std::sync::Arc<super::Handle>) -> Self {
Self {
handle,
inner: Default::default(),
}
}
/// Consume this builder, creating a customizable operation that can be modified before being
/// sent. The operation's inner [http::Request] can be modified as well.
pub async fn customize(
self,
) -> std::result::Result<
crate::operation::customize::CustomizableOperation<
crate::operation::ExportProject,
aws_http::retry::AwsResponseRetryClassifier,
>,
aws_smithy_http::result::SdkError<crate::error::ExportProjectError>,
> {
let handle = self.handle.clone();
let operation = self
.inner
.build()
.map_err(aws_smithy_http::result::SdkError::construction_failure)?
.make_operation(&handle.conf)
.await
.map_err(aws_smithy_http::result::SdkError::construction_failure)?;
Ok(crate::operation::customize::CustomizableOperation { handle, operation })
}
/// Sends the request and returns the response.
///
/// If an error occurs, an `SdkError` will be returned with additional details that
/// can be matched against.
///
/// By default, any retryable failures will be retried twice. Retry behavior
/// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
/// set when configuring the client.
pub async fn send(
self,
) -> std::result::Result<
crate::output::ExportProjectOutput,
aws_smithy_http::result::SdkError<crate::error::ExportProjectError>,
> {
let op = self
.inner
.build()
.map_err(aws_smithy_http::result::SdkError::construction_failure)?
.make_operation(&self.handle.conf)
.await
.map_err(aws_smithy_http::result::SdkError::construction_failure)?;
self.handle.client.call(op).await
}
/// <p> Unique project identifier. </p>
pub fn project_id(mut self, input: impl Into<std::string::String>) -> Self {
self.inner = self.inner.project_id(input.into());
self
}
/// <p> Unique project identifier. </p>
pub fn set_project_id(mut self, input: std::option::Option<std::string::String>) -> Self {
self.inner = self.inner.set_project_id(input);
self
}
}
/// Fluent builder constructing a request to `ListBundles`.
///
/// <p> List all available bundles. </p>
#[derive(std::clone::Clone, std::fmt::Debug)]
pub struct ListBundles {
handle: std::sync::Arc<super::Handle>,
inner: crate::input::list_bundles_input::Builder,
}
impl ListBundles {
/// Creates a new `ListBundles`.
pub(crate) fn new(handle: std::sync::Arc<super::Handle>) -> Self {
Self {
handle,
inner: Default::default(),
}
}
/// Consume this builder, creating a customizable operation that can be modified before being
/// sent. The operation's inner [http::Request] can be modified as well.
pub async fn customize(
self,
) -> std::result::Result<
crate::operation::customize::CustomizableOperation<
crate::operation::ListBundles,
aws_http::retry::AwsResponseRetryClassifier,
>,
aws_smithy_http::result::SdkError<crate::error::ListBundlesError>,
> {
let handle = self.handle.clone();
let operation = self
.inner
.build()
.map_err(aws_smithy_http::result::SdkError::construction_failure)?
.make_operation(&handle.conf)
.await
.map_err(aws_smithy_http::result::SdkError::construction_failure)?;
Ok(crate::operation::customize::CustomizableOperation { handle, operation })
}
/// Sends the request and returns the response.
///
/// If an error occurs, an `SdkError` will be returned with additional details that
/// can be matched against.
///
/// By default, any retryable failures will be retried twice. Retry behavior
/// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
/// set when configuring the client.
pub async fn send(
self,
) -> std::result::Result<
crate::output::ListBundlesOutput,
aws_smithy_http::result::SdkError<crate::error::ListBundlesError>,
> {
let op = self
.inner
.build()
.map_err(aws_smithy_http::result::SdkError::construction_failure)?
.make_operation(&self.handle.conf)
.await
.map_err(aws_smithy_http::result::SdkError::construction_failure)?;
self.handle.client.call(op).await
}
/// Create a paginator for this request
///
/// Paginators are used by calling [`send().await`](crate::paginator::ListBundlesPaginator::send) which returns a [`Stream`](tokio_stream::Stream).
pub fn into_paginator(self) -> crate::paginator::ListBundlesPaginator {
crate::paginator::ListBundlesPaginator::new(self.handle, self.inner)
}
/// <p> Maximum number of records to list in a single response. </p>
pub fn max_results(mut self, input: i32) -> Self {
self.inner = self.inner.max_results(input);
self
}
/// <p> Maximum number of records to list in a single response. </p>
pub fn set_max_results(mut self, input: std::option::Option<i32>) -> Self {
self.inner = self.inner.set_max_results(input);
self
}
/// <p> Pagination token. Set to null to start listing bundles from start. If non-null pagination token is returned in a result, then pass its value in here in another request to list more bundles. </p>
pub fn next_token(mut self, input: impl Into<std::string::String>) -> Self {
self.inner = self.inner.next_token(input.into());
self
}
/// <p> Pagination token. Set to null to start listing bundles from start. If non-null pagination token is returned in a result, then pass its value in here in another request to list more bundles. </p>
pub fn set_next_token(mut self, input: std::option::Option<std::string::String>) -> Self {
self.inner = self.inner.set_next_token(input);
self
}
}
/// Fluent builder constructing a request to `ListProjects`.
///
/// <p> Lists projects in AWS Mobile Hub. </p>
#[derive(std::clone::Clone, std::fmt::Debug)]
pub struct ListProjects {
handle: std::sync::Arc<super::Handle>,
inner: crate::input::list_projects_input::Builder,
}
impl ListProjects {
/// Creates a new `ListProjects`.
pub(crate) fn new(handle: std::sync::Arc<super::Handle>) -> Self {
Self {
handle,
inner: Default::default(),
}
}
/// Consume this builder, creating a customizable operation that can be modified before being
/// sent. The operation's inner [http::Request] can be modified as well.
pub async fn customize(
self,
) -> std::result::Result<
crate::operation::customize::CustomizableOperation<
crate::operation::ListProjects,
aws_http::retry::AwsResponseRetryClassifier,
>,
aws_smithy_http::result::SdkError<crate::error::ListProjectsError>,
> {
let handle = self.handle.clone();
let operation = self
.inner
.build()
.map_err(aws_smithy_http::result::SdkError::construction_failure)?
.make_operation(&handle.conf)
.await
.map_err(aws_smithy_http::result::SdkError::construction_failure)?;
Ok(crate::operation::customize::CustomizableOperation { handle, operation })
}
/// Sends the request and returns the response.
///
/// If an error occurs, an `SdkError` will be returned with additional details that
/// can be matched against.
///
/// By default, any retryable failures will be retried twice. Retry behavior
/// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
/// set when configuring the client.
pub async fn send(
self,
) -> std::result::Result<
crate::output::ListProjectsOutput,
aws_smithy_http::result::SdkError<crate::error::ListProjectsError>,
> {
let op = self
.inner
.build()
.map_err(aws_smithy_http::result::SdkError::construction_failure)?
.make_operation(&self.handle.conf)
.await
.map_err(aws_smithy_http::result::SdkError::construction_failure)?;
self.handle.client.call(op).await
}
/// Create a paginator for this request
///
/// Paginators are used by calling [`send().await`](crate::paginator::ListProjectsPaginator::send) which returns a [`Stream`](tokio_stream::Stream).
pub fn into_paginator(self) -> crate::paginator::ListProjectsPaginator {
crate::paginator::ListProjectsPaginator::new(self.handle, self.inner)
}
/// <p> Maximum number of records to list in a single response. </p>
pub fn max_results(mut self, input: i32) -> Self {
self.inner = self.inner.max_results(input);
self
}
/// <p> Maximum number of records to list in a single response. </p>
pub fn set_max_results(mut self, input: std::option::Option<i32>) -> Self {
self.inner = self.inner.set_max_results(input);
self
}
/// <p> Pagination token. Set to null to start listing projects from start. If non-null pagination token is returned in a result, then pass its value in here in another request to list more projects. </p>
pub fn next_token(mut self, input: impl Into<std::string::String>) -> Self {
self.inner = self.inner.next_token(input.into());
self
}
/// <p> Pagination token. Set to null to start listing projects from start. If non-null pagination token is returned in a result, then pass its value in here in another request to list more projects. </p>
pub fn set_next_token(mut self, input: std::option::Option<std::string::String>) -> Self {
self.inner = self.inner.set_next_token(input);
self
}
}
/// Fluent builder constructing a request to `UpdateProject`.
///
/// <p> Update an existing project. </p>
#[derive(std::clone::Clone, std::fmt::Debug)]
pub struct UpdateProject {
handle: std::sync::Arc<super::Handle>,
inner: crate::input::update_project_input::Builder,
}
impl UpdateProject {
/// Creates a new `UpdateProject`.
pub(crate) fn new(handle: std::sync::Arc<super::Handle>) -> Self {
Self {
handle,
inner: Default::default(),
}
}
/// Consume this builder, creating a customizable operation that can be modified before being
/// sent. The operation's inner [http::Request] can be modified as well.
pub async fn customize(
self,
) -> std::result::Result<
crate::operation::customize::CustomizableOperation<
crate::operation::UpdateProject,
aws_http::retry::AwsResponseRetryClassifier,
>,
aws_smithy_http::result::SdkError<crate::error::UpdateProjectError>,
> {
let handle = self.handle.clone();
let operation = self
.inner
.build()
.map_err(aws_smithy_http::result::SdkError::construction_failure)?
.make_operation(&handle.conf)
.await
.map_err(aws_smithy_http::result::SdkError::construction_failure)?;
Ok(crate::operation::customize::CustomizableOperation { handle, operation })
}
/// Sends the request and returns the response.
///
/// If an error occurs, an `SdkError` will be returned with additional details that
/// can be matched against.
///
/// By default, any retryable failures will be retried twice. Retry behavior
/// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
/// set when configuring the client.
pub async fn send(
self,
) -> std::result::Result<
crate::output::UpdateProjectOutput,
aws_smithy_http::result::SdkError<crate::error::UpdateProjectError>,
> {
let op = self
.inner
.build()
.map_err(aws_smithy_http::result::SdkError::construction_failure)?
.make_operation(&self.handle.conf)
.await
.map_err(aws_smithy_http::result::SdkError::construction_failure)?;
self.handle.client.call(op).await
}
/// <p> ZIP or YAML file which contains project configuration to be updated. This should be the contents of the file downloaded from the URL provided in an export project operation. </p>
pub fn contents(mut self, input: aws_smithy_types::Blob) -> Self {
self.inner = self.inner.contents(input);
self
}
/// <p> ZIP or YAML file which contains project configuration to be updated. This should be the contents of the file downloaded from the URL provided in an export project operation. </p>
pub fn set_contents(mut self, input: std::option::Option<aws_smithy_types::Blob>) -> Self {
self.inner = self.inner.set_contents(input);
self
}
/// <p> Unique project identifier. </p>
pub fn project_id(mut self, input: impl Into<std::string::String>) -> Self {
self.inner = self.inner.project_id(input.into());
self
}
/// <p> Unique project identifier. </p>
pub fn set_project_id(mut self, input: std::option::Option<std::string::String>) -> Self {
self.inner = self.inner.set_project_id(input);
self
}
}
}
impl Client {
/// Creates a new client from an [SDK Config](aws_types::sdk_config::SdkConfig).
///
/// # Panics
///
/// - This method will panic if the `sdk_config` is missing an async sleep implementation. If you experience this panic, set
/// the `sleep_impl` on the Config passed into this function to fix it.
/// - This method will panic if the `sdk_config` is missing an HTTP connector. If you experience this panic, set the
/// `http_connector` on the Config passed into this function to fix it.
pub fn new(sdk_config: &aws_types::sdk_config::SdkConfig) -> Self {
Self::from_conf(sdk_config.into())
}
/// Creates a new client from the service [`Config`](crate::Config).
///
/// # Panics
///
/// - This method will panic if the `conf` is missing an async sleep implementation. If you experience this panic, set
/// the `sleep_impl` on the Config passed into this function to fix it.
/// - This method will panic if the `conf` is missing an HTTP connector. If you experience this panic, set the
/// `http_connector` on the Config passed into this function to fix it.
pub fn from_conf(conf: crate::Config) -> Self {
let retry_config = conf
.retry_config()
.cloned()
.unwrap_or_else(aws_smithy_types::retry::RetryConfig::disabled);
let timeout_config = conf
.timeout_config()
.cloned()
.unwrap_or_else(aws_smithy_types::timeout::TimeoutConfig::disabled);
let sleep_impl = conf.sleep_impl();
if (retry_config.has_retry() || timeout_config.has_timeouts()) && sleep_impl.is_none() {
panic!("An async sleep implementation is required for retries or timeouts to work. \
Set the `sleep_impl` on the Config passed into this function to fix this panic.");
}
let connector = conf.http_connector().and_then(|c| {
let timeout_config = conf
.timeout_config()
.cloned()
.unwrap_or_else(aws_smithy_types::timeout::TimeoutConfig::disabled);
let connector_settings =
aws_smithy_client::http_connector::ConnectorSettings::from_timeout_config(
&timeout_config,
);
c.connector(&connector_settings, conf.sleep_impl())
});
let builder = aws_smithy_client::Builder::new();
let builder = match connector {
// Use provided connector
Some(c) => builder.connector(c),
None => {
#[cfg(any(feature = "rustls", feature = "native-tls"))]
{
// Use default connector based on enabled features
builder.dyn_https_connector(
aws_smithy_client::http_connector::ConnectorSettings::from_timeout_config(
&timeout_config,
),
)
}
#[cfg(not(any(feature = "rustls", feature = "native-tls")))]
{
panic!("No HTTP connector was available. Enable the `rustls` or `native-tls` crate feature or set a connector to fix this.");
}
}
};
let mut builder = builder
.middleware(aws_smithy_client::erase::DynMiddleware::new(
crate::middleware::DefaultMiddleware::new(),
))
.retry_config(retry_config.into())
.operation_timeout_config(timeout_config.into());
builder.set_sleep_impl(sleep_impl);
let client = builder.build();
Self {
handle: std::sync::Arc::new(Handle { client, conf }),
}
}
}