// Code generated by software.amazon.smithy.rust.codegen.smithy-rs. DO NOT EDIT.
#[derive(Debug)]
pub(crate) struct Handle {
    pub(crate) client: aws_smithy_client::Client<
        aws_smithy_client::erase::DynConnector,
        aws_smithy_client::erase::DynMiddleware<aws_smithy_client::erase::DynConnector>,
    >,
    pub(crate) conf: crate::Config,
}

/// Client for Amazon Macie
///
/// Client for invoking operations on Amazon Macie. Each operation on Amazon Macie is a method on this
/// this struct. `.send()` MUST be invoked on the generated operations to dispatch the request to the service.
///
/// # Examples
/// **Constructing a client and invoking an operation**
/// ```rust,no_run
/// # async fn docs() {
///     // create a shared configuration. This can be used & shared between multiple service clients.
///     let shared_config = aws_config::load_from_env().await;
///     let client = aws_sdk_macie::Client::new(&shared_config);
///     // invoke an operation
///     /* let rsp = client
///         .<operation_name>().
///         .<param>("some value")
///         .send().await; */
/// # }
/// ```
/// **Constructing a client with custom configuration**
/// ```rust,no_run
/// use aws_config::retry::RetryConfig;
/// # async fn docs() {
/// let shared_config = aws_config::load_from_env().await;
/// let config = aws_sdk_macie::config::Builder::from(&shared_config)
///   .retry_config(RetryConfig::disabled())
///   .build();
/// let client = aws_sdk_macie::Client::from_conf(config);
/// # }
#[derive(std::fmt::Debug)]
pub struct Client {
    handle: std::sync::Arc<Handle>,
}

impl std::clone::Clone for Client {
    fn clone(&self) -> Self {
        Self {
            handle: self.handle.clone(),
        }
    }
}

#[doc(inline)]
pub use aws_smithy_client::Builder;

impl
    From<
        aws_smithy_client::Client<
            aws_smithy_client::erase::DynConnector,
            aws_smithy_client::erase::DynMiddleware<aws_smithy_client::erase::DynConnector>,
        >,
    > for Client
{
    fn from(
        client: aws_smithy_client::Client<
            aws_smithy_client::erase::DynConnector,
            aws_smithy_client::erase::DynMiddleware<aws_smithy_client::erase::DynConnector>,
        >,
    ) -> Self {
        Self::with_config(client, crate::Config::builder().build())
    }
}

impl Client {
    /// Creates a client with the given service configuration.
    pub fn with_config(
        client: aws_smithy_client::Client<
            aws_smithy_client::erase::DynConnector,
            aws_smithy_client::erase::DynMiddleware<aws_smithy_client::erase::DynConnector>,
        >,
        conf: crate::Config,
    ) -> Self {
        Self {
            handle: std::sync::Arc::new(Handle { client, conf }),
        }
    }

    /// Returns the client's configuration.
    pub fn conf(&self) -> &crate::Config {
        &self.handle.conf
    }
}
impl Client {
    /// Constructs a fluent builder for the [`AssociateMemberAccount`](crate::client::fluent_builders::AssociateMemberAccount) operation.
    ///
    /// - The fluent builder is configurable:
    ///   - [`member_account_id(impl Into<String>)`](crate::client::fluent_builders::AssociateMemberAccount::member_account_id) / [`set_member_account_id(Option<String>)`](crate::client::fluent_builders::AssociateMemberAccount::set_member_account_id): <p>(Discontinued) The ID of the Amazon Web Services account that you want to associate with Amazon Macie Classic as a member account.</p>
    /// - On success, responds with [`AssociateMemberAccountOutput`](crate::output::AssociateMemberAccountOutput)

    /// - On failure, responds with [`SdkError<AssociateMemberAccountError>`](crate::error::AssociateMemberAccountError)
    pub fn associate_member_account(&self) -> fluent_builders::AssociateMemberAccount {
        fluent_builders::AssociateMemberAccount::new(self.handle.clone())
    }
    /// Constructs a fluent builder for the [`AssociateS3Resources`](crate::client::fluent_builders::AssociateS3Resources) operation.
    ///
    /// - The fluent builder is configurable:
    ///   - [`member_account_id(impl Into<String>)`](crate::client::fluent_builders::AssociateS3Resources::member_account_id) / [`set_member_account_id(Option<String>)`](crate::client::fluent_builders::AssociateS3Resources::set_member_account_id): <p>(Discontinued) The ID of the Amazon Macie Classic member account whose resources you want to associate with Macie Classic.</p>
    ///   - [`s3_resources(Vec<S3ResourceClassification>)`](crate::client::fluent_builders::AssociateS3Resources::s3_resources) / [`set_s3_resources(Option<Vec<S3ResourceClassification>>)`](crate::client::fluent_builders::AssociateS3Resources::set_s3_resources): <p>(Discontinued) The S3 resources that you want to associate with Amazon Macie Classic for monitoring and data classification.</p>
    /// - On success, responds with [`AssociateS3ResourcesOutput`](crate::output::AssociateS3ResourcesOutput) with field(s):
    ///   - [`failed_s3_resources(Option<Vec<FailedS3Resource>>)`](crate::output::AssociateS3ResourcesOutput::failed_s3_resources): <p>(Discontinued) S3 resources that couldn't be associated with Amazon Macie Classic. An error code and an error message are provided for each failed item.</p>
    /// - On failure, responds with [`SdkError<AssociateS3ResourcesError>`](crate::error::AssociateS3ResourcesError)
    pub fn associate_s3_resources(&self) -> fluent_builders::AssociateS3Resources {
        fluent_builders::AssociateS3Resources::new(self.handle.clone())
    }
    /// Constructs a fluent builder for the [`DisassociateMemberAccount`](crate::client::fluent_builders::DisassociateMemberAccount) operation.
    ///
    /// - The fluent builder is configurable:
    ///   - [`member_account_id(impl Into<String>)`](crate::client::fluent_builders::DisassociateMemberAccount::member_account_id) / [`set_member_account_id(Option<String>)`](crate::client::fluent_builders::DisassociateMemberAccount::set_member_account_id): <p>(Discontinued) The ID of the member account that you want to remove from Amazon Macie Classic.</p>
    /// - On success, responds with [`DisassociateMemberAccountOutput`](crate::output::DisassociateMemberAccountOutput)

    /// - On failure, responds with [`SdkError<DisassociateMemberAccountError>`](crate::error::DisassociateMemberAccountError)
    pub fn disassociate_member_account(&self) -> fluent_builders::DisassociateMemberAccount {
        fluent_builders::DisassociateMemberAccount::new(self.handle.clone())
    }
    /// Constructs a fluent builder for the [`DisassociateS3Resources`](crate::client::fluent_builders::DisassociateS3Resources) operation.
    ///
    /// - The fluent builder is configurable:
    ///   - [`member_account_id(impl Into<String>)`](crate::client::fluent_builders::DisassociateS3Resources::member_account_id) / [`set_member_account_id(Option<String>)`](crate::client::fluent_builders::DisassociateS3Resources::set_member_account_id): <p>(Discontinued) The ID of the Amazon Macie Classic member account whose resources you want to remove from being monitored by Macie Classic.</p>
    ///   - [`associated_s3_resources(Vec<S3Resource>)`](crate::client::fluent_builders::DisassociateS3Resources::associated_s3_resources) / [`set_associated_s3_resources(Option<Vec<S3Resource>>)`](crate::client::fluent_builders::DisassociateS3Resources::set_associated_s3_resources): <p>(Discontinued) The S3 resources (buckets or prefixes) that you want to remove from being monitored and classified by Amazon Macie Classic.</p>
    /// - On success, responds with [`DisassociateS3ResourcesOutput`](crate::output::DisassociateS3ResourcesOutput) with field(s):
    ///   - [`failed_s3_resources(Option<Vec<FailedS3Resource>>)`](crate::output::DisassociateS3ResourcesOutput::failed_s3_resources): <p>(Discontinued) S3 resources that couldn't be removed from being monitored and classified by Amazon Macie Classic. An error code and an error message are provided for each failed item. </p>
    /// - On failure, responds with [`SdkError<DisassociateS3ResourcesError>`](crate::error::DisassociateS3ResourcesError)
    pub fn disassociate_s3_resources(&self) -> fluent_builders::DisassociateS3Resources {
        fluent_builders::DisassociateS3Resources::new(self.handle.clone())
    }
    /// Constructs a fluent builder for the [`ListMemberAccounts`](crate::client::fluent_builders::ListMemberAccounts) operation.
    /// This operation supports pagination; See [`into_paginator()`](crate::client::fluent_builders::ListMemberAccounts::into_paginator).
    ///
    /// - The fluent builder is configurable:
    ///   - [`next_token(impl Into<String>)`](crate::client::fluent_builders::ListMemberAccounts::next_token) / [`set_next_token(Option<String>)`](crate::client::fluent_builders::ListMemberAccounts::set_next_token): <p>(Discontinued) Use this parameter when paginating results. Set the value of this parameter to null on your first call to the <code>ListMemberAccounts</code> action. Subsequent calls to the action fill <code>nextToken</code> in the request with the value of <code>nextToken</code> from the previous response to continue listing data.</p>
    ///   - [`max_results(i32)`](crate::client::fluent_builders::ListMemberAccounts::max_results) / [`set_max_results(Option<i32>)`](crate::client::fluent_builders::ListMemberAccounts::set_max_results): <p>(Discontinued) Use this parameter to indicate the maximum number of items that you want in the response. The default value is 250.</p>
    /// - On success, responds with [`ListMemberAccountsOutput`](crate::output::ListMemberAccountsOutput) with field(s):
    ///   - [`member_accounts(Option<Vec<MemberAccount>>)`](crate::output::ListMemberAccountsOutput::member_accounts): <p>(Discontinued) A list of the Amazon Macie Classic member accounts returned by the action. The current Macie Classic administrator account is also included in this list.</p>
    ///   - [`next_token(Option<String>)`](crate::output::ListMemberAccountsOutput::next_token): <p>(Discontinued) When a response is generated, if there is more data to be listed, this parameter is present in the response and contains the value to use for the <code>nextToken</code> parameter in a subsequent pagination request. If there is no more data to be listed, this parameter is set to null. </p>
    /// - On failure, responds with [`SdkError<ListMemberAccountsError>`](crate::error::ListMemberAccountsError)
    pub fn list_member_accounts(&self) -> fluent_builders::ListMemberAccounts {
        fluent_builders::ListMemberAccounts::new(self.handle.clone())
    }
    /// Constructs a fluent builder for the [`ListS3Resources`](crate::client::fluent_builders::ListS3Resources) operation.
    /// This operation supports pagination; See [`into_paginator()`](crate::client::fluent_builders::ListS3Resources::into_paginator).
    ///
    /// - The fluent builder is configurable:
    ///   - [`member_account_id(impl Into<String>)`](crate::client::fluent_builders::ListS3Resources::member_account_id) / [`set_member_account_id(Option<String>)`](crate::client::fluent_builders::ListS3Resources::set_member_account_id): <p>(Discontinued) The Amazon Macie Classic member account ID whose associated S3 resources you want to list. </p>
    ///   - [`next_token(impl Into<String>)`](crate::client::fluent_builders::ListS3Resources::next_token) / [`set_next_token(Option<String>)`](crate::client::fluent_builders::ListS3Resources::set_next_token): <p>(Discontinued) Use this parameter when paginating results. Set its value to null on your first call to the <code>ListS3Resources</code> action. Subsequent calls to the action fill <code>nextToken</code> in the request with the value of <code>nextToken</code> from the previous response to continue listing data. </p>
    ///   - [`max_results(i32)`](crate::client::fluent_builders::ListS3Resources::max_results) / [`set_max_results(Option<i32>)`](crate::client::fluent_builders::ListS3Resources::set_max_results): <p>(Discontinued) Use this parameter to indicate the maximum number of items that you want in the response. The default value is 250. </p>
    /// - On success, responds with [`ListS3ResourcesOutput`](crate::output::ListS3ResourcesOutput) with field(s):
    ///   - [`s3_resources(Option<Vec<S3ResourceClassification>>)`](crate::output::ListS3ResourcesOutput::s3_resources): <p>(Discontinued) A list of the associated S3 resources returned by the action.</p>
    ///   - [`next_token(Option<String>)`](crate::output::ListS3ResourcesOutput::next_token): <p>(Discontinued) When a response is generated, if there is more data to be listed, this parameter is present in the response and contains the value to use for the <code>nextToken</code> parameter in a subsequent pagination request. If there is no more data to be listed, this parameter is set to null. </p>
    /// - On failure, responds with [`SdkError<ListS3ResourcesError>`](crate::error::ListS3ResourcesError)
    pub fn list_s3_resources(&self) -> fluent_builders::ListS3Resources {
        fluent_builders::ListS3Resources::new(self.handle.clone())
    }
    /// Constructs a fluent builder for the [`UpdateS3Resources`](crate::client::fluent_builders::UpdateS3Resources) operation.
    ///
    /// - The fluent builder is configurable:
    ///   - [`member_account_id(impl Into<String>)`](crate::client::fluent_builders::UpdateS3Resources::member_account_id) / [`set_member_account_id(Option<String>)`](crate::client::fluent_builders::UpdateS3Resources::set_member_account_id): <p>(Discontinued) The Amazon Web Services account ID of the Amazon Macie Classic member account whose S3 resources' classification types you want to update.</p>
    ///   - [`s3_resources_update(Vec<S3ResourceClassificationUpdate>)`](crate::client::fluent_builders::UpdateS3Resources::s3_resources_update) / [`set_s3_resources_update(Option<Vec<S3ResourceClassificationUpdate>>)`](crate::client::fluent_builders::UpdateS3Resources::set_s3_resources_update): <p>(Discontinued) The S3 resources whose classification types you want to update.</p>
    /// - On success, responds with [`UpdateS3ResourcesOutput`](crate::output::UpdateS3ResourcesOutput) with field(s):
    ///   - [`failed_s3_resources(Option<Vec<FailedS3Resource>>)`](crate::output::UpdateS3ResourcesOutput::failed_s3_resources): <p>(Discontinued) The S3 resources whose classification types can't be updated. An error code and an error message are provided for each failed item.</p>
    /// - On failure, responds with [`SdkError<UpdateS3ResourcesError>`](crate::error::UpdateS3ResourcesError)
    pub fn update_s3_resources(&self) -> fluent_builders::UpdateS3Resources {
        fluent_builders::UpdateS3Resources::new(self.handle.clone())
    }
}
pub mod fluent_builders {

    //! Utilities to ergonomically construct a request to the service.
    //!
    //! Fluent builders are created through the [`Client`](crate::client::Client) by calling
    //! one if its operation methods. After parameters are set using the builder methods,
    //! the `send` method can be called to initiate the request.
    /// Fluent builder constructing a request to `AssociateMemberAccount`.
    ///
    /// <p>(Discontinued) Associates a specified Amazon Web Services account with Amazon Macie Classic as a member account.</p>
    #[derive(std::clone::Clone, std::fmt::Debug)]
    pub struct AssociateMemberAccount {
        handle: std::sync::Arc<super::Handle>,
        inner: crate::input::associate_member_account_input::Builder,
    }
    impl AssociateMemberAccount {
        /// Creates a new `AssociateMemberAccount`.
        pub(crate) fn new(handle: std::sync::Arc<super::Handle>) -> Self {
            Self {
                handle,
                inner: Default::default(),
            }
        }

        /// Consume this builder, creating a customizable operation that can be modified before being
        /// sent. The operation's inner [http::Request] can be modified as well.
        pub async fn customize(
            self,
        ) -> std::result::Result<
            crate::operation::customize::CustomizableOperation<
                crate::operation::AssociateMemberAccount,
                aws_http::retry::AwsResponseRetryClassifier,
            >,
            aws_smithy_http::result::SdkError<crate::error::AssociateMemberAccountError>,
        > {
            let handle = self.handle.clone();
            let operation = self
                .inner
                .build()
                .map_err(aws_smithy_http::result::SdkError::construction_failure)?
                .make_operation(&handle.conf)
                .await
                .map_err(aws_smithy_http::result::SdkError::construction_failure)?;
            Ok(crate::operation::customize::CustomizableOperation { handle, operation })
        }

        /// Sends the request and returns the response.
        ///
        /// If an error occurs, an `SdkError` will be returned with additional details that
        /// can be matched against.
        ///
        /// By default, any retryable failures will be retried twice. Retry behavior
        /// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
        /// set when configuring the client.
        pub async fn send(
            self,
        ) -> std::result::Result<
            crate::output::AssociateMemberAccountOutput,
            aws_smithy_http::result::SdkError<crate::error::AssociateMemberAccountError>,
        > {
            let op = self
                .inner
                .build()
                .map_err(aws_smithy_http::result::SdkError::construction_failure)?
                .make_operation(&self.handle.conf)
                .await
                .map_err(aws_smithy_http::result::SdkError::construction_failure)?;
            self.handle.client.call(op).await
        }
        /// <p>(Discontinued) The ID of the Amazon Web Services account that you want to associate with Amazon Macie Classic as a member account.</p>
        pub fn member_account_id(mut self, input: impl Into<std::string::String>) -> Self {
            self.inner = self.inner.member_account_id(input.into());
            self
        }
        /// <p>(Discontinued) The ID of the Amazon Web Services account that you want to associate with Amazon Macie Classic as a member account.</p>
        pub fn set_member_account_id(
            mut self,
            input: std::option::Option<std::string::String>,
        ) -> Self {
            self.inner = self.inner.set_member_account_id(input);
            self
        }
    }
    /// Fluent builder constructing a request to `AssociateS3Resources`.
    ///
    /// <p>(Discontinued) Associates specified S3 resources with Amazon Macie Classic for monitoring and data classification. If <code>memberAccountId</code> isn't specified, the action associates specified S3 resources with Macie Classic for the current Macie Classic administrator account. If <code>memberAccountId</code> is specified, the action associates specified S3 resources with Macie Classic for the specified member account.</p>
    #[derive(std::clone::Clone, std::fmt::Debug)]
    pub struct AssociateS3Resources {
        handle: std::sync::Arc<super::Handle>,
        inner: crate::input::associate_s3_resources_input::Builder,
    }
    impl AssociateS3Resources {
        /// Creates a new `AssociateS3Resources`.
        pub(crate) fn new(handle: std::sync::Arc<super::Handle>) -> Self {
            Self {
                handle,
                inner: Default::default(),
            }
        }

        /// Consume this builder, creating a customizable operation that can be modified before being
        /// sent. The operation's inner [http::Request] can be modified as well.
        pub async fn customize(
            self,
        ) -> std::result::Result<
            crate::operation::customize::CustomizableOperation<
                crate::operation::AssociateS3Resources,
                aws_http::retry::AwsResponseRetryClassifier,
            >,
            aws_smithy_http::result::SdkError<crate::error::AssociateS3ResourcesError>,
        > {
            let handle = self.handle.clone();
            let operation = self
                .inner
                .build()
                .map_err(aws_smithy_http::result::SdkError::construction_failure)?
                .make_operation(&handle.conf)
                .await
                .map_err(aws_smithy_http::result::SdkError::construction_failure)?;
            Ok(crate::operation::customize::CustomizableOperation { handle, operation })
        }

        /// Sends the request and returns the response.
        ///
        /// If an error occurs, an `SdkError` will be returned with additional details that
        /// can be matched against.
        ///
        /// By default, any retryable failures will be retried twice. Retry behavior
        /// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
        /// set when configuring the client.
        pub async fn send(
            self,
        ) -> std::result::Result<
            crate::output::AssociateS3ResourcesOutput,
            aws_smithy_http::result::SdkError<crate::error::AssociateS3ResourcesError>,
        > {
            let op = self
                .inner
                .build()
                .map_err(aws_smithy_http::result::SdkError::construction_failure)?
                .make_operation(&self.handle.conf)
                .await
                .map_err(aws_smithy_http::result::SdkError::construction_failure)?;
            self.handle.client.call(op).await
        }
        /// <p>(Discontinued) The ID of the Amazon Macie Classic member account whose resources you want to associate with Macie Classic.</p>
        pub fn member_account_id(mut self, input: impl Into<std::string::String>) -> Self {
            self.inner = self.inner.member_account_id(input.into());
            self
        }
        /// <p>(Discontinued) The ID of the Amazon Macie Classic member account whose resources you want to associate with Macie Classic.</p>
        pub fn set_member_account_id(
            mut self,
            input: std::option::Option<std::string::String>,
        ) -> Self {
            self.inner = self.inner.set_member_account_id(input);
            self
        }
        /// Appends an item to `s3Resources`.
        ///
        /// To override the contents of this collection use [`set_s3_resources`](Self::set_s3_resources).
        ///
        /// <p>(Discontinued) The S3 resources that you want to associate with Amazon Macie Classic for monitoring and data classification.</p>
        pub fn s3_resources(mut self, input: crate::model::S3ResourceClassification) -> Self {
            self.inner = self.inner.s3_resources(input);
            self
        }
        /// <p>(Discontinued) The S3 resources that you want to associate with Amazon Macie Classic for monitoring and data classification.</p>
        pub fn set_s3_resources(
            mut self,
            input: std::option::Option<std::vec::Vec<crate::model::S3ResourceClassification>>,
        ) -> Self {
            self.inner = self.inner.set_s3_resources(input);
            self
        }
    }
    /// Fluent builder constructing a request to `DisassociateMemberAccount`.
    ///
    /// <p>(Discontinued) Removes the specified member account from Amazon Macie Classic.</p>
    #[derive(std::clone::Clone, std::fmt::Debug)]
    pub struct DisassociateMemberAccount {
        handle: std::sync::Arc<super::Handle>,
        inner: crate::input::disassociate_member_account_input::Builder,
    }
    impl DisassociateMemberAccount {
        /// Creates a new `DisassociateMemberAccount`.
        pub(crate) fn new(handle: std::sync::Arc<super::Handle>) -> Self {
            Self {
                handle,
                inner: Default::default(),
            }
        }

        /// Consume this builder, creating a customizable operation that can be modified before being
        /// sent. The operation's inner [http::Request] can be modified as well.
        pub async fn customize(
            self,
        ) -> std::result::Result<
            crate::operation::customize::CustomizableOperation<
                crate::operation::DisassociateMemberAccount,
                aws_http::retry::AwsResponseRetryClassifier,
            >,
            aws_smithy_http::result::SdkError<crate::error::DisassociateMemberAccountError>,
        > {
            let handle = self.handle.clone();
            let operation = self
                .inner
                .build()
                .map_err(aws_smithy_http::result::SdkError::construction_failure)?
                .make_operation(&handle.conf)
                .await
                .map_err(aws_smithy_http::result::SdkError::construction_failure)?;
            Ok(crate::operation::customize::CustomizableOperation { handle, operation })
        }

        /// Sends the request and returns the response.
        ///
        /// If an error occurs, an `SdkError` will be returned with additional details that
        /// can be matched against.
        ///
        /// By default, any retryable failures will be retried twice. Retry behavior
        /// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
        /// set when configuring the client.
        pub async fn send(
            self,
        ) -> std::result::Result<
            crate::output::DisassociateMemberAccountOutput,
            aws_smithy_http::result::SdkError<crate::error::DisassociateMemberAccountError>,
        > {
            let op = self
                .inner
                .build()
                .map_err(aws_smithy_http::result::SdkError::construction_failure)?
                .make_operation(&self.handle.conf)
                .await
                .map_err(aws_smithy_http::result::SdkError::construction_failure)?;
            self.handle.client.call(op).await
        }
        /// <p>(Discontinued) The ID of the member account that you want to remove from Amazon Macie Classic.</p>
        pub fn member_account_id(mut self, input: impl Into<std::string::String>) -> Self {
            self.inner = self.inner.member_account_id(input.into());
            self
        }
        /// <p>(Discontinued) The ID of the member account that you want to remove from Amazon Macie Classic.</p>
        pub fn set_member_account_id(
            mut self,
            input: std::option::Option<std::string::String>,
        ) -> Self {
            self.inner = self.inner.set_member_account_id(input);
            self
        }
    }
    /// Fluent builder constructing a request to `DisassociateS3Resources`.
    ///
    /// <p>(Discontinued) Removes specified S3 resources from being monitored by Amazon Macie Classic. If <code>memberAccountId</code> isn't specified, the action removes specified S3 resources from Macie Classic for the current Macie Classic administrator account. If <code>memberAccountId</code> is specified, the action removes specified S3 resources from Macie Classic for the specified member account.</p>
    #[derive(std::clone::Clone, std::fmt::Debug)]
    pub struct DisassociateS3Resources {
        handle: std::sync::Arc<super::Handle>,
        inner: crate::input::disassociate_s3_resources_input::Builder,
    }
    impl DisassociateS3Resources {
        /// Creates a new `DisassociateS3Resources`.
        pub(crate) fn new(handle: std::sync::Arc<super::Handle>) -> Self {
            Self {
                handle,
                inner: Default::default(),
            }
        }

        /// Consume this builder, creating a customizable operation that can be modified before being
        /// sent. The operation's inner [http::Request] can be modified as well.
        pub async fn customize(
            self,
        ) -> std::result::Result<
            crate::operation::customize::CustomizableOperation<
                crate::operation::DisassociateS3Resources,
                aws_http::retry::AwsResponseRetryClassifier,
            >,
            aws_smithy_http::result::SdkError<crate::error::DisassociateS3ResourcesError>,
        > {
            let handle = self.handle.clone();
            let operation = self
                .inner
                .build()
                .map_err(aws_smithy_http::result::SdkError::construction_failure)?
                .make_operation(&handle.conf)
                .await
                .map_err(aws_smithy_http::result::SdkError::construction_failure)?;
            Ok(crate::operation::customize::CustomizableOperation { handle, operation })
        }

        /// Sends the request and returns the response.
        ///
        /// If an error occurs, an `SdkError` will be returned with additional details that
        /// can be matched against.
        ///
        /// By default, any retryable failures will be retried twice. Retry behavior
        /// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
        /// set when configuring the client.
        pub async fn send(
            self,
        ) -> std::result::Result<
            crate::output::DisassociateS3ResourcesOutput,
            aws_smithy_http::result::SdkError<crate::error::DisassociateS3ResourcesError>,
        > {
            let op = self
                .inner
                .build()
                .map_err(aws_smithy_http::result::SdkError::construction_failure)?
                .make_operation(&self.handle.conf)
                .await
                .map_err(aws_smithy_http::result::SdkError::construction_failure)?;
            self.handle.client.call(op).await
        }
        /// <p>(Discontinued) The ID of the Amazon Macie Classic member account whose resources you want to remove from being monitored by Macie Classic.</p>
        pub fn member_account_id(mut self, input: impl Into<std::string::String>) -> Self {
            self.inner = self.inner.member_account_id(input.into());
            self
        }
        /// <p>(Discontinued) The ID of the Amazon Macie Classic member account whose resources you want to remove from being monitored by Macie Classic.</p>
        pub fn set_member_account_id(
            mut self,
            input: std::option::Option<std::string::String>,
        ) -> Self {
            self.inner = self.inner.set_member_account_id(input);
            self
        }
        /// Appends an item to `associatedS3Resources`.
        ///
        /// To override the contents of this collection use [`set_associated_s3_resources`](Self::set_associated_s3_resources).
        ///
        /// <p>(Discontinued) The S3 resources (buckets or prefixes) that you want to remove from being monitored and classified by Amazon Macie Classic.</p>
        pub fn associated_s3_resources(mut self, input: crate::model::S3Resource) -> Self {
            self.inner = self.inner.associated_s3_resources(input);
            self
        }
        /// <p>(Discontinued) The S3 resources (buckets or prefixes) that you want to remove from being monitored and classified by Amazon Macie Classic.</p>
        pub fn set_associated_s3_resources(
            mut self,
            input: std::option::Option<std::vec::Vec<crate::model::S3Resource>>,
        ) -> Self {
            self.inner = self.inner.set_associated_s3_resources(input);
            self
        }
    }
    /// Fluent builder constructing a request to `ListMemberAccounts`.
    ///
    /// <p>(Discontinued) Lists all Amazon Macie Classic member accounts for the current Macie Classic administrator account.</p>
    #[derive(std::clone::Clone, std::fmt::Debug)]
    pub struct ListMemberAccounts {
        handle: std::sync::Arc<super::Handle>,
        inner: crate::input::list_member_accounts_input::Builder,
    }
    impl ListMemberAccounts {
        /// Creates a new `ListMemberAccounts`.
        pub(crate) fn new(handle: std::sync::Arc<super::Handle>) -> Self {
            Self {
                handle,
                inner: Default::default(),
            }
        }

        /// Consume this builder, creating a customizable operation that can be modified before being
        /// sent. The operation's inner [http::Request] can be modified as well.
        pub async fn customize(
            self,
        ) -> std::result::Result<
            crate::operation::customize::CustomizableOperation<
                crate::operation::ListMemberAccounts,
                aws_http::retry::AwsResponseRetryClassifier,
            >,
            aws_smithy_http::result::SdkError<crate::error::ListMemberAccountsError>,
        > {
            let handle = self.handle.clone();
            let operation = self
                .inner
                .build()
                .map_err(aws_smithy_http::result::SdkError::construction_failure)?
                .make_operation(&handle.conf)
                .await
                .map_err(aws_smithy_http::result::SdkError::construction_failure)?;
            Ok(crate::operation::customize::CustomizableOperation { handle, operation })
        }

        /// Sends the request and returns the response.
        ///
        /// If an error occurs, an `SdkError` will be returned with additional details that
        /// can be matched against.
        ///
        /// By default, any retryable failures will be retried twice. Retry behavior
        /// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
        /// set when configuring the client.
        pub async fn send(
            self,
        ) -> std::result::Result<
            crate::output::ListMemberAccountsOutput,
            aws_smithy_http::result::SdkError<crate::error::ListMemberAccountsError>,
        > {
            let op = self
                .inner
                .build()
                .map_err(aws_smithy_http::result::SdkError::construction_failure)?
                .make_operation(&self.handle.conf)
                .await
                .map_err(aws_smithy_http::result::SdkError::construction_failure)?;
            self.handle.client.call(op).await
        }
        /// Create a paginator for this request
        ///
        /// Paginators are used by calling [`send().await`](crate::paginator::ListMemberAccountsPaginator::send) which returns a [`Stream`](tokio_stream::Stream).
        pub fn into_paginator(self) -> crate::paginator::ListMemberAccountsPaginator {
            crate::paginator::ListMemberAccountsPaginator::new(self.handle, self.inner)
        }
        /// <p>(Discontinued) Use this parameter when paginating results. Set the value of this parameter to null on your first call to the <code>ListMemberAccounts</code> action. Subsequent calls to the action fill <code>nextToken</code> in the request with the value of <code>nextToken</code> from the previous response to continue listing data.</p>
        pub fn next_token(mut self, input: impl Into<std::string::String>) -> Self {
            self.inner = self.inner.next_token(input.into());
            self
        }
        /// <p>(Discontinued) Use this parameter when paginating results. Set the value of this parameter to null on your first call to the <code>ListMemberAccounts</code> action. Subsequent calls to the action fill <code>nextToken</code> in the request with the value of <code>nextToken</code> from the previous response to continue listing data.</p>
        pub fn set_next_token(mut self, input: std::option::Option<std::string::String>) -> Self {
            self.inner = self.inner.set_next_token(input);
            self
        }
        /// <p>(Discontinued) Use this parameter to indicate the maximum number of items that you want in the response. The default value is 250.</p>
        pub fn max_results(mut self, input: i32) -> Self {
            self.inner = self.inner.max_results(input);
            self
        }
        /// <p>(Discontinued) Use this parameter to indicate the maximum number of items that you want in the response. The default value is 250.</p>
        pub fn set_max_results(mut self, input: std::option::Option<i32>) -> Self {
            self.inner = self.inner.set_max_results(input);
            self
        }
    }
    /// Fluent builder constructing a request to `ListS3Resources`.
    ///
    /// <p>(Discontinued) Lists all the S3 resources associated with Amazon Macie Classic. If <code>memberAccountId</code> isn't specified, the action lists the S3 resources associated with Macie Classic for the current Macie Classic administrator account. If <code>memberAccountId</code> is specified, the action lists the S3 resources associated with Macie Classic for the specified member account. </p>
    #[derive(std::clone::Clone, std::fmt::Debug)]
    pub struct ListS3Resources {
        handle: std::sync::Arc<super::Handle>,
        inner: crate::input::list_s3_resources_input::Builder,
    }
    impl ListS3Resources {
        /// Creates a new `ListS3Resources`.
        pub(crate) fn new(handle: std::sync::Arc<super::Handle>) -> Self {
            Self {
                handle,
                inner: Default::default(),
            }
        }

        /// Consume this builder, creating a customizable operation that can be modified before being
        /// sent. The operation's inner [http::Request] can be modified as well.
        pub async fn customize(
            self,
        ) -> std::result::Result<
            crate::operation::customize::CustomizableOperation<
                crate::operation::ListS3Resources,
                aws_http::retry::AwsResponseRetryClassifier,
            >,
            aws_smithy_http::result::SdkError<crate::error::ListS3ResourcesError>,
        > {
            let handle = self.handle.clone();
            let operation = self
                .inner
                .build()
                .map_err(aws_smithy_http::result::SdkError::construction_failure)?
                .make_operation(&handle.conf)
                .await
                .map_err(aws_smithy_http::result::SdkError::construction_failure)?;
            Ok(crate::operation::customize::CustomizableOperation { handle, operation })
        }

        /// Sends the request and returns the response.
        ///
        /// If an error occurs, an `SdkError` will be returned with additional details that
        /// can be matched against.
        ///
        /// By default, any retryable failures will be retried twice. Retry behavior
        /// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
        /// set when configuring the client.
        pub async fn send(
            self,
        ) -> std::result::Result<
            crate::output::ListS3ResourcesOutput,
            aws_smithy_http::result::SdkError<crate::error::ListS3ResourcesError>,
        > {
            let op = self
                .inner
                .build()
                .map_err(aws_smithy_http::result::SdkError::construction_failure)?
                .make_operation(&self.handle.conf)
                .await
                .map_err(aws_smithy_http::result::SdkError::construction_failure)?;
            self.handle.client.call(op).await
        }
        /// Create a paginator for this request
        ///
        /// Paginators are used by calling [`send().await`](crate::paginator::ListS3ResourcesPaginator::send) which returns a [`Stream`](tokio_stream::Stream).
        pub fn into_paginator(self) -> crate::paginator::ListS3ResourcesPaginator {
            crate::paginator::ListS3ResourcesPaginator::new(self.handle, self.inner)
        }
        /// <p>(Discontinued) The Amazon Macie Classic member account ID whose associated S3 resources you want to list. </p>
        pub fn member_account_id(mut self, input: impl Into<std::string::String>) -> Self {
            self.inner = self.inner.member_account_id(input.into());
            self
        }
        /// <p>(Discontinued) The Amazon Macie Classic member account ID whose associated S3 resources you want to list. </p>
        pub fn set_member_account_id(
            mut self,
            input: std::option::Option<std::string::String>,
        ) -> Self {
            self.inner = self.inner.set_member_account_id(input);
            self
        }
        /// <p>(Discontinued) Use this parameter when paginating results. Set its value to null on your first call to the <code>ListS3Resources</code> action. Subsequent calls to the action fill <code>nextToken</code> in the request with the value of <code>nextToken</code> from the previous response to continue listing data. </p>
        pub fn next_token(mut self, input: impl Into<std::string::String>) -> Self {
            self.inner = self.inner.next_token(input.into());
            self
        }
        /// <p>(Discontinued) Use this parameter when paginating results. Set its value to null on your first call to the <code>ListS3Resources</code> action. Subsequent calls to the action fill <code>nextToken</code> in the request with the value of <code>nextToken</code> from the previous response to continue listing data. </p>
        pub fn set_next_token(mut self, input: std::option::Option<std::string::String>) -> Self {
            self.inner = self.inner.set_next_token(input);
            self
        }
        /// <p>(Discontinued) Use this parameter to indicate the maximum number of items that you want in the response. The default value is 250. </p>
        pub fn max_results(mut self, input: i32) -> Self {
            self.inner = self.inner.max_results(input);
            self
        }
        /// <p>(Discontinued) Use this parameter to indicate the maximum number of items that you want in the response. The default value is 250. </p>
        pub fn set_max_results(mut self, input: std::option::Option<i32>) -> Self {
            self.inner = self.inner.set_max_results(input);
            self
        }
    }
    /// Fluent builder constructing a request to `UpdateS3Resources`.
    ///
    /// <p>(Discontinued) Updates the classification types for the specified S3 resources. If <code>memberAccountId</code> isn't specified, the action updates the classification types of the S3 resources associated with Amazon Macie Classic for the current Macie Classic administrator account. If <code>memberAccountId</code> is specified, the action updates the classification types of the S3 resources associated with Macie Classic for the specified member account.</p>
    #[derive(std::clone::Clone, std::fmt::Debug)]
    pub struct UpdateS3Resources {
        handle: std::sync::Arc<super::Handle>,
        inner: crate::input::update_s3_resources_input::Builder,
    }
    impl UpdateS3Resources {
        /// Creates a new `UpdateS3Resources`.
        pub(crate) fn new(handle: std::sync::Arc<super::Handle>) -> Self {
            Self {
                handle,
                inner: Default::default(),
            }
        }

        /// Consume this builder, creating a customizable operation that can be modified before being
        /// sent. The operation's inner [http::Request] can be modified as well.
        pub async fn customize(
            self,
        ) -> std::result::Result<
            crate::operation::customize::CustomizableOperation<
                crate::operation::UpdateS3Resources,
                aws_http::retry::AwsResponseRetryClassifier,
            >,
            aws_smithy_http::result::SdkError<crate::error::UpdateS3ResourcesError>,
        > {
            let handle = self.handle.clone();
            let operation = self
                .inner
                .build()
                .map_err(aws_smithy_http::result::SdkError::construction_failure)?
                .make_operation(&handle.conf)
                .await
                .map_err(aws_smithy_http::result::SdkError::construction_failure)?;
            Ok(crate::operation::customize::CustomizableOperation { handle, operation })
        }

        /// Sends the request and returns the response.
        ///
        /// If an error occurs, an `SdkError` will be returned with additional details that
        /// can be matched against.
        ///
        /// By default, any retryable failures will be retried twice. Retry behavior
        /// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
        /// set when configuring the client.
        pub async fn send(
            self,
        ) -> std::result::Result<
            crate::output::UpdateS3ResourcesOutput,
            aws_smithy_http::result::SdkError<crate::error::UpdateS3ResourcesError>,
        > {
            let op = self
                .inner
                .build()
                .map_err(aws_smithy_http::result::SdkError::construction_failure)?
                .make_operation(&self.handle.conf)
                .await
                .map_err(aws_smithy_http::result::SdkError::construction_failure)?;
            self.handle.client.call(op).await
        }
        /// <p>(Discontinued) The Amazon Web Services account ID of the Amazon Macie Classic member account whose S3 resources' classification types you want to update.</p>
        pub fn member_account_id(mut self, input: impl Into<std::string::String>) -> Self {
            self.inner = self.inner.member_account_id(input.into());
            self
        }
        /// <p>(Discontinued) The Amazon Web Services account ID of the Amazon Macie Classic member account whose S3 resources' classification types you want to update.</p>
        pub fn set_member_account_id(
            mut self,
            input: std::option::Option<std::string::String>,
        ) -> Self {
            self.inner = self.inner.set_member_account_id(input);
            self
        }
        /// Appends an item to `s3ResourcesUpdate`.
        ///
        /// To override the contents of this collection use [`set_s3_resources_update`](Self::set_s3_resources_update).
        ///
        /// <p>(Discontinued) The S3 resources whose classification types you want to update.</p>
        pub fn s3_resources_update(
            mut self,
            input: crate::model::S3ResourceClassificationUpdate,
        ) -> Self {
            self.inner = self.inner.s3_resources_update(input);
            self
        }
        /// <p>(Discontinued) The S3 resources whose classification types you want to update.</p>
        pub fn set_s3_resources_update(
            mut self,
            input: std::option::Option<std::vec::Vec<crate::model::S3ResourceClassificationUpdate>>,
        ) -> Self {
            self.inner = self.inner.set_s3_resources_update(input);
            self
        }
    }
}

impl Client {
    /// Creates a new client from an [SDK Config](aws_types::sdk_config::SdkConfig).
    ///
    /// # Panics
    ///
    /// - This method will panic if the `sdk_config` is missing an async sleep implementation. If you experience this panic, set
    ///     the `sleep_impl` on the Config passed into this function to fix it.
    /// - This method will panic if the `sdk_config` is missing an HTTP connector. If you experience this panic, set the
    ///     `http_connector` on the Config passed into this function to fix it.
    pub fn new(sdk_config: &aws_types::sdk_config::SdkConfig) -> Self {
        Self::from_conf(sdk_config.into())
    }

    /// Creates a new client from the service [`Config`](crate::Config).
    ///
    /// # Panics
    ///
    /// - This method will panic if the `conf` is missing an async sleep implementation. If you experience this panic, set
    ///     the `sleep_impl` on the Config passed into this function to fix it.
    /// - This method will panic if the `conf` is missing an HTTP connector. If you experience this panic, set the
    ///     `http_connector` on the Config passed into this function to fix it.
    pub fn from_conf(conf: crate::Config) -> Self {
        let retry_config = conf
            .retry_config()
            .cloned()
            .unwrap_or_else(aws_smithy_types::retry::RetryConfig::disabled);
        let timeout_config = conf
            .timeout_config()
            .cloned()
            .unwrap_or_else(aws_smithy_types::timeout::TimeoutConfig::disabled);
        let sleep_impl = conf.sleep_impl();
        if (retry_config.has_retry() || timeout_config.has_timeouts()) && sleep_impl.is_none() {
            panic!("An async sleep implementation is required for retries or timeouts to work. \
                                    Set the `sleep_impl` on the Config passed into this function to fix this panic.");
        }

        let connector = conf.http_connector().and_then(|c| {
            let timeout_config = conf
                .timeout_config()
                .cloned()
                .unwrap_or_else(aws_smithy_types::timeout::TimeoutConfig::disabled);
            let connector_settings =
                aws_smithy_client::http_connector::ConnectorSettings::from_timeout_config(
                    &timeout_config,
                );
            c.connector(&connector_settings, conf.sleep_impl())
        });

        let builder = aws_smithy_client::Builder::new();

        let builder = match connector {
            // Use provided connector
            Some(c) => builder.connector(c),
            None => {
                #[cfg(any(feature = "rustls", feature = "native-tls"))]
                {
                    // Use default connector based on enabled features
                    builder.dyn_https_connector(
                        aws_smithy_client::http_connector::ConnectorSettings::from_timeout_config(
                            &timeout_config,
                        ),
                    )
                }
                #[cfg(not(any(feature = "rustls", feature = "native-tls")))]
                {
                    panic!("No HTTP connector was available. Enable the `rustls` or `native-tls` crate feature or set a connector to fix this.");
                }
            }
        };
        let mut builder = builder
            .middleware(aws_smithy_client::erase::DynMiddleware::new(
                crate::middleware::DefaultMiddleware::new(),
            ))
            .retry_config(retry_config.into())
            .operation_timeout_config(timeout_config.into());
        builder.set_sleep_impl(sleep_impl);
        let client = builder.build();

        Self {
            handle: std::sync::Arc::new(Handle { client, conf }),
        }
    }
}