aws_sdk_lookoutvision/operation/create_dataset/builders.rs
1// Code generated by software.amazon.smithy.rust.codegen.smithy-rs. DO NOT EDIT.
2pub use crate::operation::create_dataset::_create_dataset_output::CreateDatasetOutputBuilder;
3
4pub use crate::operation::create_dataset::_create_dataset_input::CreateDatasetInputBuilder;
5
6impl crate::operation::create_dataset::builders::CreateDatasetInputBuilder {
7 /// Sends a request with this input using the given client.
8 pub async fn send_with(
9 self,
10 client: &crate::Client,
11 ) -> ::std::result::Result<
12 crate::operation::create_dataset::CreateDatasetOutput,
13 ::aws_smithy_runtime_api::client::result::SdkError<
14 crate::operation::create_dataset::CreateDatasetError,
15 ::aws_smithy_runtime_api::client::orchestrator::HttpResponse,
16 >,
17 > {
18 let mut fluent_builder = client.create_dataset();
19 fluent_builder.inner = self;
20 fluent_builder.send().await
21 }
22}
23/// Fluent builder constructing a request to `CreateDataset`.
24///
25/// <p>Creates a new dataset in an Amazon Lookout for Vision project. <code>CreateDataset</code> can create a training or a test dataset from a valid dataset source (<code>DatasetSource</code>).</p>
26/// <p>If you want a single dataset project, specify <code>train</code> for the value of <code>DatasetType</code>.</p>
27/// <p>To have a project with separate training and test datasets, call <code>CreateDataset</code> twice. On the first call, specify <code>train</code> for the value of <code>DatasetType</code>. On the second call, specify <code>test</code> for the value of <code>DatasetType</code>.</p>
28/// <p>This operation requires permissions to perform the <code>lookoutvision:CreateDataset</code> operation.</p>
29#[derive(::std::clone::Clone, ::std::fmt::Debug)]
30pub struct CreateDatasetFluentBuilder {
31 handle: ::std::sync::Arc<crate::client::Handle>,
32 inner: crate::operation::create_dataset::builders::CreateDatasetInputBuilder,
33 config_override: ::std::option::Option<crate::config::Builder>,
34}
35impl
36 crate::client::customize::internal::CustomizableSend<
37 crate::operation::create_dataset::CreateDatasetOutput,
38 crate::operation::create_dataset::CreateDatasetError,
39 > for CreateDatasetFluentBuilder
40{
41 fn send(
42 self,
43 config_override: crate::config::Builder,
44 ) -> crate::client::customize::internal::BoxFuture<
45 crate::client::customize::internal::SendResult<
46 crate::operation::create_dataset::CreateDatasetOutput,
47 crate::operation::create_dataset::CreateDatasetError,
48 >,
49 > {
50 ::std::boxed::Box::pin(async move { self.config_override(config_override).send().await })
51 }
52}
53impl CreateDatasetFluentBuilder {
54 /// Creates a new `CreateDatasetFluentBuilder`.
55 pub(crate) fn new(handle: ::std::sync::Arc<crate::client::Handle>) -> Self {
56 Self {
57 handle,
58 inner: ::std::default::Default::default(),
59 config_override: ::std::option::Option::None,
60 }
61 }
62 /// Access the CreateDataset as a reference.
63 pub fn as_input(&self) -> &crate::operation::create_dataset::builders::CreateDatasetInputBuilder {
64 &self.inner
65 }
66 /// Sends the request and returns the response.
67 ///
68 /// If an error occurs, an `SdkError` will be returned with additional details that
69 /// can be matched against.
70 ///
71 /// By default, any retryable failures will be retried twice. Retry behavior
72 /// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
73 /// set when configuring the client.
74 pub async fn send(
75 self,
76 ) -> ::std::result::Result<
77 crate::operation::create_dataset::CreateDatasetOutput,
78 ::aws_smithy_runtime_api::client::result::SdkError<
79 crate::operation::create_dataset::CreateDatasetError,
80 ::aws_smithy_runtime_api::client::orchestrator::HttpResponse,
81 >,
82 > {
83 let input = self
84 .inner
85 .build()
86 .map_err(::aws_smithy_runtime_api::client::result::SdkError::construction_failure)?;
87 let runtime_plugins = crate::operation::create_dataset::CreateDataset::operation_runtime_plugins(
88 self.handle.runtime_plugins.clone(),
89 &self.handle.conf,
90 self.config_override,
91 );
92 crate::operation::create_dataset::CreateDataset::orchestrate(&runtime_plugins, input).await
93 }
94
95 /// Consumes this builder, creating a customizable operation that can be modified before being sent.
96 pub fn customize(
97 self,
98 ) -> crate::client::customize::CustomizableOperation<
99 crate::operation::create_dataset::CreateDatasetOutput,
100 crate::operation::create_dataset::CreateDatasetError,
101 Self,
102 > {
103 crate::client::customize::CustomizableOperation::new(self)
104 }
105 pub(crate) fn config_override(mut self, config_override: impl ::std::convert::Into<crate::config::Builder>) -> Self {
106 self.set_config_override(::std::option::Option::Some(config_override.into()));
107 self
108 }
109
110 pub(crate) fn set_config_override(&mut self, config_override: ::std::option::Option<crate::config::Builder>) -> &mut Self {
111 self.config_override = config_override;
112 self
113 }
114 /// <p>The name of the project in which you want to create a dataset.</p>
115 pub fn project_name(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
116 self.inner = self.inner.project_name(input.into());
117 self
118 }
119 /// <p>The name of the project in which you want to create a dataset.</p>
120 pub fn set_project_name(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
121 self.inner = self.inner.set_project_name(input);
122 self
123 }
124 /// <p>The name of the project in which you want to create a dataset.</p>
125 pub fn get_project_name(&self) -> &::std::option::Option<::std::string::String> {
126 self.inner.get_project_name()
127 }
128 /// <p>The type of the dataset. Specify <code>train</code> for a training dataset. Specify <code>test</code> for a test dataset.</p>
129 pub fn dataset_type(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
130 self.inner = self.inner.dataset_type(input.into());
131 self
132 }
133 /// <p>The type of the dataset. Specify <code>train</code> for a training dataset. Specify <code>test</code> for a test dataset.</p>
134 pub fn set_dataset_type(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
135 self.inner = self.inner.set_dataset_type(input);
136 self
137 }
138 /// <p>The type of the dataset. Specify <code>train</code> for a training dataset. Specify <code>test</code> for a test dataset.</p>
139 pub fn get_dataset_type(&self) -> &::std::option::Option<::std::string::String> {
140 self.inner.get_dataset_type()
141 }
142 /// <p>The location of the manifest file that Amazon Lookout for Vision uses to create the dataset.</p>
143 /// <p>If you don't specify <code>DatasetSource</code>, an empty dataset is created and the operation synchronously returns. Later, you can add JSON Lines by calling <code>UpdateDatasetEntries</code>.</p>
144 /// <p>If you specify a value for <code>DataSource</code>, the manifest at the S3 location is validated and used to create the dataset. The call to <code>CreateDataset</code> is asynchronous and might take a while to complete. To find out the current status, Check the value of <code>Status</code> returned in a call to <code>DescribeDataset</code>.</p>
145 pub fn dataset_source(mut self, input: crate::types::DatasetSource) -> Self {
146 self.inner = self.inner.dataset_source(input);
147 self
148 }
149 /// <p>The location of the manifest file that Amazon Lookout for Vision uses to create the dataset.</p>
150 /// <p>If you don't specify <code>DatasetSource</code>, an empty dataset is created and the operation synchronously returns. Later, you can add JSON Lines by calling <code>UpdateDatasetEntries</code>.</p>
151 /// <p>If you specify a value for <code>DataSource</code>, the manifest at the S3 location is validated and used to create the dataset. The call to <code>CreateDataset</code> is asynchronous and might take a while to complete. To find out the current status, Check the value of <code>Status</code> returned in a call to <code>DescribeDataset</code>.</p>
152 pub fn set_dataset_source(mut self, input: ::std::option::Option<crate::types::DatasetSource>) -> Self {
153 self.inner = self.inner.set_dataset_source(input);
154 self
155 }
156 /// <p>The location of the manifest file that Amazon Lookout for Vision uses to create the dataset.</p>
157 /// <p>If you don't specify <code>DatasetSource</code>, an empty dataset is created and the operation synchronously returns. Later, you can add JSON Lines by calling <code>UpdateDatasetEntries</code>.</p>
158 /// <p>If you specify a value for <code>DataSource</code>, the manifest at the S3 location is validated and used to create the dataset. The call to <code>CreateDataset</code> is asynchronous and might take a while to complete. To find out the current status, Check the value of <code>Status</code> returned in a call to <code>DescribeDataset</code>.</p>
159 pub fn get_dataset_source(&self) -> &::std::option::Option<crate::types::DatasetSource> {
160 self.inner.get_dataset_source()
161 }
162 /// <p>ClientToken is an idempotency token that ensures a call to <code>CreateDataset</code> completes only once. You choose the value to pass. For example, An issue might prevent you from getting a response from <code>CreateDataset</code>. In this case, safely retry your call to <code>CreateDataset</code> by using the same <code>ClientToken</code> parameter value.</p>
163 /// <p>If you don't supply a value for <code>ClientToken</code>, the AWS SDK you are using inserts a value for you. This prevents retries after a network error from making multiple dataset creation requests. You'll need to provide your own value for other use cases.</p>
164 /// <p>An error occurs if the other input parameters are not the same as in the first request. Using a different value for <code>ClientToken</code> is considered a new call to <code>CreateDataset</code>. An idempotency token is active for 8 hours.</p>
165 pub fn client_token(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
166 self.inner = self.inner.client_token(input.into());
167 self
168 }
169 /// <p>ClientToken is an idempotency token that ensures a call to <code>CreateDataset</code> completes only once. You choose the value to pass. For example, An issue might prevent you from getting a response from <code>CreateDataset</code>. In this case, safely retry your call to <code>CreateDataset</code> by using the same <code>ClientToken</code> parameter value.</p>
170 /// <p>If you don't supply a value for <code>ClientToken</code>, the AWS SDK you are using inserts a value for you. This prevents retries after a network error from making multiple dataset creation requests. You'll need to provide your own value for other use cases.</p>
171 /// <p>An error occurs if the other input parameters are not the same as in the first request. Using a different value for <code>ClientToken</code> is considered a new call to <code>CreateDataset</code>. An idempotency token is active for 8 hours.</p>
172 pub fn set_client_token(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
173 self.inner = self.inner.set_client_token(input);
174 self
175 }
176 /// <p>ClientToken is an idempotency token that ensures a call to <code>CreateDataset</code> completes only once. You choose the value to pass. For example, An issue might prevent you from getting a response from <code>CreateDataset</code>. In this case, safely retry your call to <code>CreateDataset</code> by using the same <code>ClientToken</code> parameter value.</p>
177 /// <p>If you don't supply a value for <code>ClientToken</code>, the AWS SDK you are using inserts a value for you. This prevents retries after a network error from making multiple dataset creation requests. You'll need to provide your own value for other use cases.</p>
178 /// <p>An error occurs if the other input parameters are not the same as in the first request. Using a different value for <code>ClientToken</code> is considered a new call to <code>CreateDataset</code>. An idempotency token is active for 8 hours.</p>
179 pub fn get_client_token(&self) -> &::std::option::Option<::std::string::String> {
180 self.inner.get_client_token()
181 }
182}