Struct aws_sdk_kinesis::operation::get_shard_iterator::builders::GetShardIteratorFluentBuilder

pub struct GetShardIteratorFluentBuilder { /* private fields */ }

Fluent builder constructing a request to GetShardIterator.

Gets an Amazon Kinesis shard iterator. A shard iterator expires 5 minutes after it is returned to the requester.

When invoking this API, you must use either the StreamARN or the StreamName parameter, or both. It is recommended that you use the StreamARN input parameter when you invoke this API.

A shard iterator specifies the shard position from which to start reading data records sequentially. The position is specified using the sequence number of a data record in a shard. A sequence number is the identifier associated with every record ingested in the stream, and is assigned when a record is put into the stream. Each stream has one or more shards.

You must specify the shard iterator type. For example, you can set the ShardIteratorType parameter to read exactly from the position denoted by a specific sequence number by using the AT_SEQUENCE_NUMBER shard iterator type. Alternatively, the parameter can read right after the sequence number by using the AFTER_SEQUENCE_NUMBER shard iterator type, using sequence numbers returned by earlier calls to PutRecord, PutRecords, GetRecords, or DescribeStream. In the request, you can specify the shard iterator type AT_TIMESTAMP to read records from an arbitrary point in time, TRIM_HORIZON to cause ShardIterator to point to the last untrimmed record in the shard in the system (the oldest data record in the shard), or LATEST so that you always read the most recent data in the shard.

When you read repeatedly from a stream, use a GetShardIterator request to get the first shard iterator for use in your first GetRecords request and for subsequent reads use the shard iterator returned by the GetRecords request in NextShardIterator. A new shard iterator is returned by every GetRecords request in NextShardIterator, which you use in the ShardIterator parameter of the next GetRecords request.

If a GetShardIterator request is made too often, you receive a ProvisionedThroughputExceededException. For more information about throughput limits, see GetRecords, and Streams Limits in the Amazon Kinesis Data Streams Developer Guide.

If the shard is closed, GetShardIterator returns a valid iterator for the last sequence number of the shard. A shard can be closed as a result of using SplitShard or MergeShards.

GetShardIterator has a limit of five transactions per second per account per open shard.

Implementations

impl GetShardIteratorFluentBuilder

pub fn as_input(&self) -> &GetShardIteratorInputBuilder

Access the GetShardIterator as a reference.

pub async fn send( self ) -> Result<GetShardIteratorOutput, SdkError<GetShardIteratorError, HttpResponse>>

Sends the request and returns the response.

If an error occurs, an SdkError will be returned with additional details that can be matched against.

By default, any retryable failures will be retried twice. Retry behavior is configurable with the RetryConfig, which can be set when configuring the client.

pub fn customize( self ) -> CustomizableOperation<GetShardIteratorOutput, GetShardIteratorError, Self>

Consumes this builder, creating a customizable operation that can be modified before being sent.

pub fn stream_name(self, input: impl Into<String>) -> Self

The name of the Amazon Kinesis data stream.

pub fn set_stream_name(self, input: Option<String>) -> Self

The name of the Amazon Kinesis data stream.

pub fn get_stream_name(&self) -> &Option<String>

The name of the Amazon Kinesis data stream.

pub fn shard_id(self, input: impl Into<String>) -> Self

The shard ID of the Kinesis Data Streams shard to get the iterator for.

pub fn set_shard_id(self, input: Option<String>) -> Self

The shard ID of the Kinesis Data Streams shard to get the iterator for.

pub fn get_shard_id(&self) -> &Option<String>

The shard ID of the Kinesis Data Streams shard to get the iterator for.

pub fn shard_iterator_type(self, input: ShardIteratorType) -> Self

Determines how the shard iterator is used to start reading data records from the shard.

The following are the valid Amazon Kinesis shard iterator types:

• AT_SEQUENCE_NUMBER - Start reading from the position denoted by a specific sequence number, provided in the value StartingSequenceNumber.

• AFTER_SEQUENCE_NUMBER - Start reading right after the position denoted by a specific sequence number, provided in the value StartingSequenceNumber.

• AT_TIMESTAMP - Start reading from the position denoted by a specific time stamp, provided in the value Timestamp.

• TRIM_HORIZON - Start reading at the last untrimmed record in the shard in the system, which is the oldest data record in the shard.

• LATEST - Start reading just after the most recent record in the shard, so that you always read the most recent data in the shard.

pub fn set_shard_iterator_type(self, input: Option<ShardIteratorType>) -> Self

Determines how the shard iterator is used to start reading data records from the shard.

The following are the valid Amazon Kinesis shard iterator types:

• AT_SEQUENCE_NUMBER - Start reading from the position denoted by a specific sequence number, provided in the value StartingSequenceNumber.

• AFTER_SEQUENCE_NUMBER - Start reading right after the position denoted by a specific sequence number, provided in the value StartingSequenceNumber.

• AT_TIMESTAMP - Start reading from the position denoted by a specific time stamp, provided in the value Timestamp.

• TRIM_HORIZON - Start reading at the last untrimmed record in the shard in the system, which is the oldest data record in the shard.

• LATEST - Start reading just after the most recent record in the shard, so that you always read the most recent data in the shard.

pub fn get_shard_iterator_type(&self) -> &Option<ShardIteratorType>

Determines how the shard iterator is used to start reading data records from the shard.

The following are the valid Amazon Kinesis shard iterator types:

• AT_SEQUENCE_NUMBER - Start reading from the position denoted by a specific sequence number, provided in the value StartingSequenceNumber.

• AFTER_SEQUENCE_NUMBER - Start reading right after the position denoted by a specific sequence number, provided in the value StartingSequenceNumber.

• AT_TIMESTAMP - Start reading from the position denoted by a specific time stamp, provided in the value Timestamp.

• TRIM_HORIZON - Start reading at the last untrimmed record in the shard in the system, which is the oldest data record in the shard.

• LATEST - Start reading just after the most recent record in the shard, so that you always read the most recent data in the shard.

pub fn starting_sequence_number(self, input: impl Into<String>) -> Self

The sequence number of the data record in the shard from which to start reading. Used with shard iterator type AT_SEQUENCE_NUMBER and AFTER_SEQUENCE_NUMBER.

pub fn set_starting_sequence_number(self, input: Option<String>) -> Self

The sequence number of the data record in the shard from which to start reading. Used with shard iterator type AT_SEQUENCE_NUMBER and AFTER_SEQUENCE_NUMBER.

pub fn get_starting_sequence_number(&self) -> &Option<String>

The sequence number of the data record in the shard from which to start reading. Used with shard iterator type AT_SEQUENCE_NUMBER and AFTER_SEQUENCE_NUMBER.

pub fn timestamp(self, input: DateTime) -> Self

The time stamp of the data record from which to start reading. Used with shard iterator type AT_TIMESTAMP. A time stamp is the Unix epoch date with precision in milliseconds. For example, 2016-04-04T19:58:46.480-00:00 or 1459799926.480. If a record with this exact time stamp does not exist, the iterator returned is for the next (later) record. If the time stamp is older than the current trim horizon, the iterator returned is for the oldest untrimmed data record (TRIM_HORIZON).

pub fn set_timestamp(self, input: Option<DateTime>) -> Self

The time stamp of the data record from which to start reading. Used with shard iterator type AT_TIMESTAMP. A time stamp is the Unix epoch date with precision in milliseconds. For example, 2016-04-04T19:58:46.480-00:00 or 1459799926.480. If a record with this exact time stamp does not exist, the iterator returned is for the next (later) record. If the time stamp is older than the current trim horizon, the iterator returned is for the oldest untrimmed data record (TRIM_HORIZON).

pub fn get_timestamp(&self) -> &Option<DateTime>

The time stamp of the data record from which to start reading. Used with shard iterator type AT_TIMESTAMP. A time stamp is the Unix epoch date with precision in milliseconds. For example, 2016-04-04T19:58:46.480-00:00 or 1459799926.480. If a record with this exact time stamp does not exist, the iterator returned is for the next (later) record. If the time stamp is older than the current trim horizon, the iterator returned is for the oldest untrimmed data record (TRIM_HORIZON).

pub fn stream_arn(self, input: impl Into<String>) -> Self

The ARN of the stream.

pub fn set_stream_arn(self, input: Option<String>) -> Self

The ARN of the stream.

pub fn get_stream_arn(&self) -> &Option<String>

The ARN of the stream.

Trait Implementations

impl Clone for GetShardIteratorFluentBuilder

fn clone(&self) -> GetShardIteratorFluentBuilder

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for GetShardIteratorFluentBuilder

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.