aws_sdk_iotwireless/operation/create_wireless_gateway/
builders.rs

1// Code generated by software.amazon.smithy.rust.codegen.smithy-rs. DO NOT EDIT.
2pub use crate::operation::create_wireless_gateway::_create_wireless_gateway_output::CreateWirelessGatewayOutputBuilder;
3
4pub use crate::operation::create_wireless_gateway::_create_wireless_gateway_input::CreateWirelessGatewayInputBuilder;
5
6impl crate::operation::create_wireless_gateway::builders::CreateWirelessGatewayInputBuilder {
7    /// Sends a request with this input using the given client.
8    pub async fn send_with(
9        self,
10        client: &crate::Client,
11    ) -> ::std::result::Result<
12        crate::operation::create_wireless_gateway::CreateWirelessGatewayOutput,
13        ::aws_smithy_runtime_api::client::result::SdkError<
14            crate::operation::create_wireless_gateway::CreateWirelessGatewayError,
15            ::aws_smithy_runtime_api::client::orchestrator::HttpResponse,
16        >,
17    > {
18        let mut fluent_builder = client.create_wireless_gateway();
19        fluent_builder.inner = self;
20        fluent_builder.send().await
21    }
22}
23/// Fluent builder constructing a request to `CreateWirelessGateway`.
24///
25/// <p>Provisions a wireless gateway.</p><note>
26/// <p>When provisioning a wireless gateway, you might run into duplication errors for the following reasons.</p>
27/// <ul>
28/// <li>
29/// <p>If you specify a <code>GatewayEui</code> value that already exists.</p></li>
30/// <li>
31/// <p>If you used a <code>ClientRequestToken</code> with the same parameters within the last 10 minutes.</p></li>
32/// </ul>
33/// <p>To avoid this error, make sure that you use unique identifiers and parameters for each request within the specified time period.</p>
34/// </note>
35#[derive(::std::clone::Clone, ::std::fmt::Debug)]
36pub struct CreateWirelessGatewayFluentBuilder {
37    handle: ::std::sync::Arc<crate::client::Handle>,
38    inner: crate::operation::create_wireless_gateway::builders::CreateWirelessGatewayInputBuilder,
39    config_override: ::std::option::Option<crate::config::Builder>,
40}
41impl
42    crate::client::customize::internal::CustomizableSend<
43        crate::operation::create_wireless_gateway::CreateWirelessGatewayOutput,
44        crate::operation::create_wireless_gateway::CreateWirelessGatewayError,
45    > for CreateWirelessGatewayFluentBuilder
46{
47    fn send(
48        self,
49        config_override: crate::config::Builder,
50    ) -> crate::client::customize::internal::BoxFuture<
51        crate::client::customize::internal::SendResult<
52            crate::operation::create_wireless_gateway::CreateWirelessGatewayOutput,
53            crate::operation::create_wireless_gateway::CreateWirelessGatewayError,
54        >,
55    > {
56        ::std::boxed::Box::pin(async move { self.config_override(config_override).send().await })
57    }
58}
59impl CreateWirelessGatewayFluentBuilder {
60    /// Creates a new `CreateWirelessGatewayFluentBuilder`.
61    pub(crate) fn new(handle: ::std::sync::Arc<crate::client::Handle>) -> Self {
62        Self {
63            handle,
64            inner: ::std::default::Default::default(),
65            config_override: ::std::option::Option::None,
66        }
67    }
68    /// Access the CreateWirelessGateway as a reference.
69    pub fn as_input(&self) -> &crate::operation::create_wireless_gateway::builders::CreateWirelessGatewayInputBuilder {
70        &self.inner
71    }
72    /// Sends the request and returns the response.
73    ///
74    /// If an error occurs, an `SdkError` will be returned with additional details that
75    /// can be matched against.
76    ///
77    /// By default, any retryable failures will be retried twice. Retry behavior
78    /// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
79    /// set when configuring the client.
80    pub async fn send(
81        self,
82    ) -> ::std::result::Result<
83        crate::operation::create_wireless_gateway::CreateWirelessGatewayOutput,
84        ::aws_smithy_runtime_api::client::result::SdkError<
85            crate::operation::create_wireless_gateway::CreateWirelessGatewayError,
86            ::aws_smithy_runtime_api::client::orchestrator::HttpResponse,
87        >,
88    > {
89        let input = self
90            .inner
91            .build()
92            .map_err(::aws_smithy_runtime_api::client::result::SdkError::construction_failure)?;
93        let runtime_plugins = crate::operation::create_wireless_gateway::CreateWirelessGateway::operation_runtime_plugins(
94            self.handle.runtime_plugins.clone(),
95            &self.handle.conf,
96            self.config_override,
97        );
98        crate::operation::create_wireless_gateway::CreateWirelessGateway::orchestrate(&runtime_plugins, input).await
99    }
100
101    /// Consumes this builder, creating a customizable operation that can be modified before being sent.
102    pub fn customize(
103        self,
104    ) -> crate::client::customize::CustomizableOperation<
105        crate::operation::create_wireless_gateway::CreateWirelessGatewayOutput,
106        crate::operation::create_wireless_gateway::CreateWirelessGatewayError,
107        Self,
108    > {
109        crate::client::customize::CustomizableOperation::new(self)
110    }
111    pub(crate) fn config_override(mut self, config_override: impl ::std::convert::Into<crate::config::Builder>) -> Self {
112        self.set_config_override(::std::option::Option::Some(config_override.into()));
113        self
114    }
115
116    pub(crate) fn set_config_override(&mut self, config_override: ::std::option::Option<crate::config::Builder>) -> &mut Self {
117        self.config_override = config_override;
118        self
119    }
120    /// <p>The name of the new resource.</p><note>
121    /// <p>The following special characters aren't accepted: <code>&lt;&gt;^#~$</code></p>
122    /// </note>
123    pub fn name(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
124        self.inner = self.inner.name(input.into());
125        self
126    }
127    /// <p>The name of the new resource.</p><note>
128    /// <p>The following special characters aren't accepted: <code>&lt;&gt;^#~$</code></p>
129    /// </note>
130    pub fn set_name(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
131        self.inner = self.inner.set_name(input);
132        self
133    }
134    /// <p>The name of the new resource.</p><note>
135    /// <p>The following special characters aren't accepted: <code>&lt;&gt;^#~$</code></p>
136    /// </note>
137    pub fn get_name(&self) -> &::std::option::Option<::std::string::String> {
138        self.inner.get_name()
139    }
140    /// <p>The description of the new resource.</p>
141    pub fn description(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
142        self.inner = self.inner.description(input.into());
143        self
144    }
145    /// <p>The description of the new resource.</p>
146    pub fn set_description(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
147        self.inner = self.inner.set_description(input);
148        self
149    }
150    /// <p>The description of the new resource.</p>
151    pub fn get_description(&self) -> &::std::option::Option<::std::string::String> {
152        self.inner.get_description()
153    }
154    /// <p>The gateway configuration information to use to create the wireless gateway.</p>
155    pub fn lo_ra_wan(mut self, input: crate::types::LoRaWanGateway) -> Self {
156        self.inner = self.inner.lo_ra_wan(input);
157        self
158    }
159    /// <p>The gateway configuration information to use to create the wireless gateway.</p>
160    pub fn set_lo_ra_wan(mut self, input: ::std::option::Option<crate::types::LoRaWanGateway>) -> Self {
161        self.inner = self.inner.set_lo_ra_wan(input);
162        self
163    }
164    /// <p>The gateway configuration information to use to create the wireless gateway.</p>
165    pub fn get_lo_ra_wan(&self) -> &::std::option::Option<crate::types::LoRaWanGateway> {
166        self.inner.get_lo_ra_wan()
167    }
168    ///
169    /// Appends an item to `Tags`.
170    ///
171    /// To override the contents of this collection use [`set_tags`](Self::set_tags).
172    ///
173    /// <p>The tags to attach to the new wireless gateway. Tags are metadata that you can use to manage a resource.</p>
174    pub fn tags(mut self, input: crate::types::Tag) -> Self {
175        self.inner = self.inner.tags(input);
176        self
177    }
178    /// <p>The tags to attach to the new wireless gateway. Tags are metadata that you can use to manage a resource.</p>
179    pub fn set_tags(mut self, input: ::std::option::Option<::std::vec::Vec<crate::types::Tag>>) -> Self {
180        self.inner = self.inner.set_tags(input);
181        self
182    }
183    /// <p>The tags to attach to the new wireless gateway. Tags are metadata that you can use to manage a resource.</p>
184    pub fn get_tags(&self) -> &::std::option::Option<::std::vec::Vec<crate::types::Tag>> {
185        self.inner.get_tags()
186    }
187    /// <p>Each resource must have a unique client request token. The client token is used to implement idempotency. It ensures that the request completes no more than one time. If you retry a request with the same token and the same parameters, the request will complete successfully. However, if you try to create a new resource using the same token but different parameters, an HTTP 409 conflict occurs. If you omit this value, AWS SDKs will automatically generate a unique client request. For more information about idempotency, see <a href="https://docs.aws.amazon.com/ec2/latest/devguide/ec2-api-idempotency.html">Ensuring idempotency in Amazon EC2 API requests</a>.</p>
188    pub fn client_request_token(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
189        self.inner = self.inner.client_request_token(input.into());
190        self
191    }
192    /// <p>Each resource must have a unique client request token. The client token is used to implement idempotency. It ensures that the request completes no more than one time. If you retry a request with the same token and the same parameters, the request will complete successfully. However, if you try to create a new resource using the same token but different parameters, an HTTP 409 conflict occurs. If you omit this value, AWS SDKs will automatically generate a unique client request. For more information about idempotency, see <a href="https://docs.aws.amazon.com/ec2/latest/devguide/ec2-api-idempotency.html">Ensuring idempotency in Amazon EC2 API requests</a>.</p>
193    pub fn set_client_request_token(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
194        self.inner = self.inner.set_client_request_token(input);
195        self
196    }
197    /// <p>Each resource must have a unique client request token. The client token is used to implement idempotency. It ensures that the request completes no more than one time. If you retry a request with the same token and the same parameters, the request will complete successfully. However, if you try to create a new resource using the same token but different parameters, an HTTP 409 conflict occurs. If you omit this value, AWS SDKs will automatically generate a unique client request. For more information about idempotency, see <a href="https://docs.aws.amazon.com/ec2/latest/devguide/ec2-api-idempotency.html">Ensuring idempotency in Amazon EC2 API requests</a>.</p>
198    pub fn get_client_request_token(&self) -> &::std::option::Option<::std::string::String> {
199        self.inner.get_client_request_token()
200    }
201}
aws_sdk_iotwireless/operation/create_wireless_gateway/builders.rs

aws_sdk_iotwireless/operation/create_wireless_gateway/
builders.rs
