// Code generated by software.amazon.smithy.rust.codegen.smithy-rs. DO NOT EDIT.
#[derive(Debug)]
pub(crate) struct Handle<
    C = aws_smithy_client::erase::DynConnector,
    M = crate::middleware::DefaultMiddleware,
    R = aws_smithy_client::retry::Standard,
> {
    pub(crate) client: aws_smithy_client::Client<C, M, R>,
    pub(crate) conf: crate::Config,
}

/// Client for AWS IoT Fleet Hub
///
/// Client for invoking operations on AWS IoT Fleet Hub. Each operation on AWS IoT Fleet Hub is a method on this
/// this struct. `.send()` MUST be invoked on the generated operations to dispatch the request to the service.
///
/// # Examples
/// **Constructing a client and invoking an operation**
/// ```rust,no_run
/// # async fn docs() {
///     // create a shared configuration. This can be used & shared between multiple service clients.
///     let shared_config = aws_config::load_from_env().await;
///     let client = aws_sdk_iotfleethub::Client::new(&shared_config);
///     // invoke an operation
///     /* let rsp = client
///         .<operation_name>().
///         .<param>("some value")
///         .send().await; */
/// # }
/// ```
/// **Constructing a client with custom configuration**
/// ```rust,no_run
/// use aws_config::RetryConfig;
/// # async fn docs() {
///     let shared_config = aws_config::load_from_env().await;
///     let config = aws_sdk_iotfleethub::config::Builder::from(&shared_config)
///         .retry_config(RetryConfig::disabled())
///         .build();
///     let client = aws_sdk_iotfleethub::Client::from_conf(config);
/// # }
#[derive(std::fmt::Debug)]
pub struct Client<
    C = aws_smithy_client::erase::DynConnector,
    M = crate::middleware::DefaultMiddleware,
    R = aws_smithy_client::retry::Standard,
> {
    handle: std::sync::Arc<Handle<C, M, R>>,
}

impl<C, M, R> std::clone::Clone for Client<C, M, R> {
    fn clone(&self) -> Self {
        Self {
            handle: self.handle.clone(),
        }
    }
}

#[doc(inline)]
pub use aws_smithy_client::Builder;

impl<C, M, R> From<aws_smithy_client::Client<C, M, R>> for Client<C, M, R> {
    fn from(client: aws_smithy_client::Client<C, M, R>) -> Self {
        Self::with_config(client, crate::Config::builder().build())
    }
}

impl<C, M, R> Client<C, M, R> {
    /// Creates a client with the given service configuration.
    pub fn with_config(client: aws_smithy_client::Client<C, M, R>, conf: crate::Config) -> Self {
        Self {
            handle: std::sync::Arc::new(Handle { client, conf }),
        }
    }

    /// Returns the client's configuration.
    pub fn conf(&self) -> &crate::Config {
        &self.handle.conf
    }
}
impl<C, M, R> Client<C, M, R>
where
    C: aws_smithy_client::bounds::SmithyConnector,
    M: aws_smithy_client::bounds::SmithyMiddleware<C>,
    R: aws_smithy_client::retry::NewRequestPolicy,
{
    /// Constructs a fluent builder for the [`CreateApplication`](crate::client::fluent_builders::CreateApplication) operation.
    ///
    /// - The fluent builder is configurable:
    ///   - [`application_name(impl Into<String>)`](crate::client::fluent_builders::CreateApplication::application_name) / [`set_application_name(Option<String>)`](crate::client::fluent_builders::CreateApplication::set_application_name): <p>The name of the web application.</p>
    ///   - [`application_description(impl Into<String>)`](crate::client::fluent_builders::CreateApplication::application_description) / [`set_application_description(Option<String>)`](crate::client::fluent_builders::CreateApplication::set_application_description): <p>An optional description of the web application.</p>
    ///   - [`client_token(impl Into<String>)`](crate::client::fluent_builders::CreateApplication::client_token) / [`set_client_token(Option<String>)`](crate::client::fluent_builders::CreateApplication::set_client_token): <p>A unique case-sensitive identifier that you can provide to ensure the idempotency of the request. Don't reuse this client token if a new idempotent request is required.</p>
    ///   - [`role_arn(impl Into<String>)`](crate::client::fluent_builders::CreateApplication::role_arn) / [`set_role_arn(Option<String>)`](crate::client::fluent_builders::CreateApplication::set_role_arn): <p>The ARN of the role that the web application assumes when it interacts with AWS IoT Core.</p> <note>   <p>The name of the role must be in the form <code>AWSIotFleetHub_<i>random_string</i> </code>.</p>  </note>
    ///   - [`tags(HashMap<String, String>)`](crate::client::fluent_builders::CreateApplication::tags) / [`set_tags(Option<HashMap<String, String>>)`](crate::client::fluent_builders::CreateApplication::set_tags): <p>A set of key/value pairs that you can use to manage the web application resource.</p>
    /// - On success, responds with [`CreateApplicationOutput`](crate::output::CreateApplicationOutput) with field(s):
    ///   - [`application_id(Option<String>)`](crate::output::CreateApplicationOutput::application_id): <p>The unique Id of the web application.</p>
    ///   - [`application_arn(Option<String>)`](crate::output::CreateApplicationOutput::application_arn): <p>The ARN of the web application.</p>
    /// - On failure, responds with [`SdkError<CreateApplicationError>`](crate::error::CreateApplicationError)
    pub fn create_application(&self) -> fluent_builders::CreateApplication<C, M, R> {
        fluent_builders::CreateApplication::new(self.handle.clone())
    }
    /// Constructs a fluent builder for the [`DeleteApplication`](crate::client::fluent_builders::DeleteApplication) operation.
    ///
    /// - The fluent builder is configurable:
    ///   - [`application_id(impl Into<String>)`](crate::client::fluent_builders::DeleteApplication::application_id) / [`set_application_id(Option<String>)`](crate::client::fluent_builders::DeleteApplication::set_application_id): <p>The unique Id of the web application.</p>
    ///   - [`client_token(impl Into<String>)`](crate::client::fluent_builders::DeleteApplication::client_token) / [`set_client_token(Option<String>)`](crate::client::fluent_builders::DeleteApplication::set_client_token): <p>A unique case-sensitive identifier that you can provide to ensure the idempotency of the request. Don't reuse this client token if a new idempotent request is required.</p>
    /// - On success, responds with [`DeleteApplicationOutput`](crate::output::DeleteApplicationOutput)

    /// - On failure, responds with [`SdkError<DeleteApplicationError>`](crate::error::DeleteApplicationError)
    pub fn delete_application(&self) -> fluent_builders::DeleteApplication<C, M, R> {
        fluent_builders::DeleteApplication::new(self.handle.clone())
    }
    /// Constructs a fluent builder for the [`DescribeApplication`](crate::client::fluent_builders::DescribeApplication) operation.
    ///
    /// - The fluent builder is configurable:
    ///   - [`application_id(impl Into<String>)`](crate::client::fluent_builders::DescribeApplication::application_id) / [`set_application_id(Option<String>)`](crate::client::fluent_builders::DescribeApplication::set_application_id): <p>The unique Id of the web application.</p>
    /// - On success, responds with [`DescribeApplicationOutput`](crate::output::DescribeApplicationOutput) with field(s):
    ///   - [`application_id(Option<String>)`](crate::output::DescribeApplicationOutput::application_id): <p>The unique Id of the web application.</p>
    ///   - [`application_arn(Option<String>)`](crate::output::DescribeApplicationOutput::application_arn): <p>The ARN of the web application.</p>
    ///   - [`application_name(Option<String>)`](crate::output::DescribeApplicationOutput::application_name): <p>The name of the web application.</p>
    ///   - [`application_description(Option<String>)`](crate::output::DescribeApplicationOutput::application_description): <p>An optional description of the web application.</p>
    ///   - [`application_url(Option<String>)`](crate::output::DescribeApplicationOutput::application_url): <p>The URL of the web application.</p>
    ///   - [`application_state(Option<ApplicationState>)`](crate::output::DescribeApplicationOutput::application_state): <p>The current state of the web application.</p>
    ///   - [`application_creation_date(i64)`](crate::output::DescribeApplicationOutput::application_creation_date): <p>The date (in Unix epoch time) when the application was created.</p>
    ///   - [`application_last_update_date(i64)`](crate::output::DescribeApplicationOutput::application_last_update_date): <p>The date (in Unix epoch time) when the application was last updated.</p>
    ///   - [`role_arn(Option<String>)`](crate::output::DescribeApplicationOutput::role_arn): <p>The ARN of the role that the web application assumes when it interacts with AWS IoT Core.</p>
    ///   - [`sso_client_id(Option<String>)`](crate::output::DescribeApplicationOutput::sso_client_id): <p>The Id of the single sign-on client that you use to authenticate and authorize users on the web application.</p>
    ///   - [`error_message(Option<String>)`](crate::output::DescribeApplicationOutput::error_message): <p>A message indicating why the <code>DescribeApplication</code> API failed.</p>
    ///   - [`tags(Option<HashMap<String, String>>)`](crate::output::DescribeApplicationOutput::tags): <p>A set of key/value pairs that you can use to manage the web application resource.</p>
    /// - On failure, responds with [`SdkError<DescribeApplicationError>`](crate::error::DescribeApplicationError)
    pub fn describe_application(&self) -> fluent_builders::DescribeApplication<C, M, R> {
        fluent_builders::DescribeApplication::new(self.handle.clone())
    }
    /// Constructs a fluent builder for the [`ListApplications`](crate::client::fluent_builders::ListApplications) operation.
    /// This operation supports pagination; See [`into_paginator()`](crate::client::fluent_builders::ListApplications::into_paginator).
    ///
    /// - The fluent builder is configurable:
    ///   - [`next_token(impl Into<String>)`](crate::client::fluent_builders::ListApplications::next_token) / [`set_next_token(Option<String>)`](crate::client::fluent_builders::ListApplications::set_next_token): <p>A token used to get the next set of results.</p>
    /// - On success, responds with [`ListApplicationsOutput`](crate::output::ListApplicationsOutput) with field(s):
    ///   - [`application_summaries(Option<Vec<ApplicationSummary>>)`](crate::output::ListApplicationsOutput::application_summaries): <p>An array of objects that provide summaries of information about the web applications in the list.</p>
    ///   - [`next_token(Option<String>)`](crate::output::ListApplicationsOutput::next_token): <p>A token used to get the next set of results.</p>
    /// - On failure, responds with [`SdkError<ListApplicationsError>`](crate::error::ListApplicationsError)
    pub fn list_applications(&self) -> fluent_builders::ListApplications<C, M, R> {
        fluent_builders::ListApplications::new(self.handle.clone())
    }
    /// Constructs a fluent builder for the [`ListTagsForResource`](crate::client::fluent_builders::ListTagsForResource) operation.
    ///
    /// - The fluent builder is configurable:
    ///   - [`resource_arn(impl Into<String>)`](crate::client::fluent_builders::ListTagsForResource::resource_arn) / [`set_resource_arn(Option<String>)`](crate::client::fluent_builders::ListTagsForResource::set_resource_arn): <p>The ARN of the resource.</p>
    /// - On success, responds with [`ListTagsForResourceOutput`](crate::output::ListTagsForResourceOutput) with field(s):
    ///   - [`tags(Option<HashMap<String, String>>)`](crate::output::ListTagsForResourceOutput::tags): <p>The list of tags assigned to the resource.</p>
    /// - On failure, responds with [`SdkError<ListTagsForResourceError>`](crate::error::ListTagsForResourceError)
    pub fn list_tags_for_resource(&self) -> fluent_builders::ListTagsForResource<C, M, R> {
        fluent_builders::ListTagsForResource::new(self.handle.clone())
    }
    /// Constructs a fluent builder for the [`TagResource`](crate::client::fluent_builders::TagResource) operation.
    ///
    /// - The fluent builder is configurable:
    ///   - [`resource_arn(impl Into<String>)`](crate::client::fluent_builders::TagResource::resource_arn) / [`set_resource_arn(Option<String>)`](crate::client::fluent_builders::TagResource::set_resource_arn): <p>The ARN of the resource.</p>
    ///   - [`tags(HashMap<String, String>)`](crate::client::fluent_builders::TagResource::tags) / [`set_tags(Option<HashMap<String, String>>)`](crate::client::fluent_builders::TagResource::set_tags): <p>The new or modified tags for the resource.</p>
    /// - On success, responds with [`TagResourceOutput`](crate::output::TagResourceOutput)

    /// - On failure, responds with [`SdkError<TagResourceError>`](crate::error::TagResourceError)
    pub fn tag_resource(&self) -> fluent_builders::TagResource<C, M, R> {
        fluent_builders::TagResource::new(self.handle.clone())
    }
    /// Constructs a fluent builder for the [`UntagResource`](crate::client::fluent_builders::UntagResource) operation.
    ///
    /// - The fluent builder is configurable:
    ///   - [`resource_arn(impl Into<String>)`](crate::client::fluent_builders::UntagResource::resource_arn) / [`set_resource_arn(Option<String>)`](crate::client::fluent_builders::UntagResource::set_resource_arn): <p>The ARN of the resource.</p>
    ///   - [`tag_keys(Vec<String>)`](crate::client::fluent_builders::UntagResource::tag_keys) / [`set_tag_keys(Option<Vec<String>>)`](crate::client::fluent_builders::UntagResource::set_tag_keys): <p>A list of the keys of the tags to be removed from the resource.</p>
    /// - On success, responds with [`UntagResourceOutput`](crate::output::UntagResourceOutput)

    /// - On failure, responds with [`SdkError<UntagResourceError>`](crate::error::UntagResourceError)
    pub fn untag_resource(&self) -> fluent_builders::UntagResource<C, M, R> {
        fluent_builders::UntagResource::new(self.handle.clone())
    }
    /// Constructs a fluent builder for the [`UpdateApplication`](crate::client::fluent_builders::UpdateApplication) operation.
    ///
    /// - The fluent builder is configurable:
    ///   - [`application_id(impl Into<String>)`](crate::client::fluent_builders::UpdateApplication::application_id) / [`set_application_id(Option<String>)`](crate::client::fluent_builders::UpdateApplication::set_application_id): <p>The unique Id of the web application.</p>
    ///   - [`application_name(impl Into<String>)`](crate::client::fluent_builders::UpdateApplication::application_name) / [`set_application_name(Option<String>)`](crate::client::fluent_builders::UpdateApplication::set_application_name): <p>The name of the web application.</p>
    ///   - [`application_description(impl Into<String>)`](crate::client::fluent_builders::UpdateApplication::application_description) / [`set_application_description(Option<String>)`](crate::client::fluent_builders::UpdateApplication::set_application_description): <p>An optional description of the web application.</p>
    ///   - [`client_token(impl Into<String>)`](crate::client::fluent_builders::UpdateApplication::client_token) / [`set_client_token(Option<String>)`](crate::client::fluent_builders::UpdateApplication::set_client_token): <p>A unique case-sensitive identifier that you can provide to ensure the idempotency of the request. Don't reuse this client token if a new idempotent request is required.</p>
    /// - On success, responds with [`UpdateApplicationOutput`](crate::output::UpdateApplicationOutput)

    /// - On failure, responds with [`SdkError<UpdateApplicationError>`](crate::error::UpdateApplicationError)
    pub fn update_application(&self) -> fluent_builders::UpdateApplication<C, M, R> {
        fluent_builders::UpdateApplication::new(self.handle.clone())
    }
}
pub mod fluent_builders {
    //!
    //! Utilities to ergonomically construct a request to the service.
    //!
    //! Fluent builders are created through the [`Client`](crate::client::Client) by calling
    //! one if its operation methods. After parameters are set using the builder methods,
    //! the `send` method can be called to initiate the request.
    //!
    /// Fluent builder constructing a request to `CreateApplication`.
    ///
    /// <p>Creates a Fleet Hub for AWS IoT Device Management web application.</p> <note>
    /// <p>Fleet Hub for AWS IoT Device Management is in public preview and is subject to change.</p>
    /// </note>
    #[derive(std::clone::Clone, std::fmt::Debug)]
    pub struct CreateApplication<
        C = aws_smithy_client::erase::DynConnector,
        M = crate::middleware::DefaultMiddleware,
        R = aws_smithy_client::retry::Standard,
    > {
        handle: std::sync::Arc<super::Handle<C, M, R>>,
        inner: crate::input::create_application_input::Builder,
    }
    impl<C, M, R> CreateApplication<C, M, R>
    where
        C: aws_smithy_client::bounds::SmithyConnector,
        M: aws_smithy_client::bounds::SmithyMiddleware<C>,
        R: aws_smithy_client::retry::NewRequestPolicy,
    {
        /// Creates a new `CreateApplication`.
        pub(crate) fn new(handle: std::sync::Arc<super::Handle<C, M, R>>) -> Self {
            Self {
                handle,
                inner: Default::default(),
            }
        }

        /// Sends the request and returns the response.
        ///
        /// If an error occurs, an `SdkError` will be returned with additional details that
        /// can be matched against.
        ///
        /// By default, any retryable failures will be retried twice. Retry behavior
        /// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
        /// set when configuring the client.
        pub async fn send(
            self,
        ) -> std::result::Result<
            crate::output::CreateApplicationOutput,
            aws_smithy_http::result::SdkError<crate::error::CreateApplicationError>,
        >
        where
            R::Policy: aws_smithy_client::bounds::SmithyRetryPolicy<
                crate::input::CreateApplicationInputOperationOutputAlias,
                crate::output::CreateApplicationOutput,
                crate::error::CreateApplicationError,
                crate::input::CreateApplicationInputOperationRetryAlias,
            >,
        {
            let op = self
                .inner
                .build()
                .map_err(|err| aws_smithy_http::result::SdkError::ConstructionFailure(err.into()))?
                .make_operation(&self.handle.conf)
                .await
                .map_err(|err| {
                    aws_smithy_http::result::SdkError::ConstructionFailure(err.into())
                })?;
            self.handle.client.call(op).await
        }
        /// <p>The name of the web application.</p>
        pub fn application_name(mut self, input: impl Into<std::string::String>) -> Self {
            self.inner = self.inner.application_name(input.into());
            self
        }
        /// <p>The name of the web application.</p>
        pub fn set_application_name(
            mut self,
            input: std::option::Option<std::string::String>,
        ) -> Self {
            self.inner = self.inner.set_application_name(input);
            self
        }
        /// <p>An optional description of the web application.</p>
        pub fn application_description(mut self, input: impl Into<std::string::String>) -> Self {
            self.inner = self.inner.application_description(input.into());
            self
        }
        /// <p>An optional description of the web application.</p>
        pub fn set_application_description(
            mut self,
            input: std::option::Option<std::string::String>,
        ) -> Self {
            self.inner = self.inner.set_application_description(input);
            self
        }
        /// <p>A unique case-sensitive identifier that you can provide to ensure the idempotency of the request. Don't reuse this client token if a new idempotent request is required.</p>
        pub fn client_token(mut self, input: impl Into<std::string::String>) -> Self {
            self.inner = self.inner.client_token(input.into());
            self
        }
        /// <p>A unique case-sensitive identifier that you can provide to ensure the idempotency of the request. Don't reuse this client token if a new idempotent request is required.</p>
        pub fn set_client_token(mut self, input: std::option::Option<std::string::String>) -> Self {
            self.inner = self.inner.set_client_token(input);
            self
        }
        /// <p>The ARN of the role that the web application assumes when it interacts with AWS IoT Core.</p> <note>
        /// <p>The name of the role must be in the form <code>AWSIotFleetHub_<i>random_string</i> </code>.</p>
        /// </note>
        pub fn role_arn(mut self, input: impl Into<std::string::String>) -> Self {
            self.inner = self.inner.role_arn(input.into());
            self
        }
        /// <p>The ARN of the role that the web application assumes when it interacts with AWS IoT Core.</p> <note>
        /// <p>The name of the role must be in the form <code>AWSIotFleetHub_<i>random_string</i> </code>.</p>
        /// </note>
        pub fn set_role_arn(mut self, input: std::option::Option<std::string::String>) -> Self {
            self.inner = self.inner.set_role_arn(input);
            self
        }
        /// Adds a key-value pair to `tags`.
        ///
        /// To override the contents of this collection use [`set_tags`](Self::set_tags).
        ///
        /// <p>A set of key/value pairs that you can use to manage the web application resource.</p>
        pub fn tags(
            mut self,
            k: impl Into<std::string::String>,
            v: impl Into<std::string::String>,
        ) -> Self {
            self.inner = self.inner.tags(k.into(), v.into());
            self
        }
        /// <p>A set of key/value pairs that you can use to manage the web application resource.</p>
        pub fn set_tags(
            mut self,
            input: std::option::Option<
                std::collections::HashMap<std::string::String, std::string::String>,
            >,
        ) -> Self {
            self.inner = self.inner.set_tags(input);
            self
        }
    }
    /// Fluent builder constructing a request to `DeleteApplication`.
    ///
    /// <p>Deletes a Fleet Hub for AWS IoT Device Management web application.</p> <note>
    /// <p>Fleet Hub for AWS IoT Device Management is in public preview and is subject to change.</p>
    /// </note>
    #[derive(std::clone::Clone, std::fmt::Debug)]
    pub struct DeleteApplication<
        C = aws_smithy_client::erase::DynConnector,
        M = crate::middleware::DefaultMiddleware,
        R = aws_smithy_client::retry::Standard,
    > {
        handle: std::sync::Arc<super::Handle<C, M, R>>,
        inner: crate::input::delete_application_input::Builder,
    }
    impl<C, M, R> DeleteApplication<C, M, R>
    where
        C: aws_smithy_client::bounds::SmithyConnector,
        M: aws_smithy_client::bounds::SmithyMiddleware<C>,
        R: aws_smithy_client::retry::NewRequestPolicy,
    {
        /// Creates a new `DeleteApplication`.
        pub(crate) fn new(handle: std::sync::Arc<super::Handle<C, M, R>>) -> Self {
            Self {
                handle,
                inner: Default::default(),
            }
        }

        /// Sends the request and returns the response.
        ///
        /// If an error occurs, an `SdkError` will be returned with additional details that
        /// can be matched against.
        ///
        /// By default, any retryable failures will be retried twice. Retry behavior
        /// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
        /// set when configuring the client.
        pub async fn send(
            self,
        ) -> std::result::Result<
            crate::output::DeleteApplicationOutput,
            aws_smithy_http::result::SdkError<crate::error::DeleteApplicationError>,
        >
        where
            R::Policy: aws_smithy_client::bounds::SmithyRetryPolicy<
                crate::input::DeleteApplicationInputOperationOutputAlias,
                crate::output::DeleteApplicationOutput,
                crate::error::DeleteApplicationError,
                crate::input::DeleteApplicationInputOperationRetryAlias,
            >,
        {
            let op = self
                .inner
                .build()
                .map_err(|err| aws_smithy_http::result::SdkError::ConstructionFailure(err.into()))?
                .make_operation(&self.handle.conf)
                .await
                .map_err(|err| {
                    aws_smithy_http::result::SdkError::ConstructionFailure(err.into())
                })?;
            self.handle.client.call(op).await
        }
        /// <p>The unique Id of the web application.</p>
        pub fn application_id(mut self, input: impl Into<std::string::String>) -> Self {
            self.inner = self.inner.application_id(input.into());
            self
        }
        /// <p>The unique Id of the web application.</p>
        pub fn set_application_id(
            mut self,
            input: std::option::Option<std::string::String>,
        ) -> Self {
            self.inner = self.inner.set_application_id(input);
            self
        }
        /// <p>A unique case-sensitive identifier that you can provide to ensure the idempotency of the request. Don't reuse this client token if a new idempotent request is required.</p>
        pub fn client_token(mut self, input: impl Into<std::string::String>) -> Self {
            self.inner = self.inner.client_token(input.into());
            self
        }
        /// <p>A unique case-sensitive identifier that you can provide to ensure the idempotency of the request. Don't reuse this client token if a new idempotent request is required.</p>
        pub fn set_client_token(mut self, input: std::option::Option<std::string::String>) -> Self {
            self.inner = self.inner.set_client_token(input);
            self
        }
    }
    /// Fluent builder constructing a request to `DescribeApplication`.
    ///
    /// <p>Gets information about a Fleet Hub for AWS IoT Device Management web application.</p> <note>
    /// <p>Fleet Hub for AWS IoT Device Management is in public preview and is subject to change.</p>
    /// </note>
    #[derive(std::clone::Clone, std::fmt::Debug)]
    pub struct DescribeApplication<
        C = aws_smithy_client::erase::DynConnector,
        M = crate::middleware::DefaultMiddleware,
        R = aws_smithy_client::retry::Standard,
    > {
        handle: std::sync::Arc<super::Handle<C, M, R>>,
        inner: crate::input::describe_application_input::Builder,
    }
    impl<C, M, R> DescribeApplication<C, M, R>
    where
        C: aws_smithy_client::bounds::SmithyConnector,
        M: aws_smithy_client::bounds::SmithyMiddleware<C>,
        R: aws_smithy_client::retry::NewRequestPolicy,
    {
        /// Creates a new `DescribeApplication`.
        pub(crate) fn new(handle: std::sync::Arc<super::Handle<C, M, R>>) -> Self {
            Self {
                handle,
                inner: Default::default(),
            }
        }

        /// Sends the request and returns the response.
        ///
        /// If an error occurs, an `SdkError` will be returned with additional details that
        /// can be matched against.
        ///
        /// By default, any retryable failures will be retried twice. Retry behavior
        /// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
        /// set when configuring the client.
        pub async fn send(
            self,
        ) -> std::result::Result<
            crate::output::DescribeApplicationOutput,
            aws_smithy_http::result::SdkError<crate::error::DescribeApplicationError>,
        >
        where
            R::Policy: aws_smithy_client::bounds::SmithyRetryPolicy<
                crate::input::DescribeApplicationInputOperationOutputAlias,
                crate::output::DescribeApplicationOutput,
                crate::error::DescribeApplicationError,
                crate::input::DescribeApplicationInputOperationRetryAlias,
            >,
        {
            let op = self
                .inner
                .build()
                .map_err(|err| aws_smithy_http::result::SdkError::ConstructionFailure(err.into()))?
                .make_operation(&self.handle.conf)
                .await
                .map_err(|err| {
                    aws_smithy_http::result::SdkError::ConstructionFailure(err.into())
                })?;
            self.handle.client.call(op).await
        }
        /// <p>The unique Id of the web application.</p>
        pub fn application_id(mut self, input: impl Into<std::string::String>) -> Self {
            self.inner = self.inner.application_id(input.into());
            self
        }
        /// <p>The unique Id of the web application.</p>
        pub fn set_application_id(
            mut self,
            input: std::option::Option<std::string::String>,
        ) -> Self {
            self.inner = self.inner.set_application_id(input);
            self
        }
    }
    /// Fluent builder constructing a request to `ListApplications`.
    ///
    /// <p>Gets a list of Fleet Hub for AWS IoT Device Management web applications for the current account.</p> <note>
    /// <p>Fleet Hub for AWS IoT Device Management is in public preview and is subject to change.</p>
    /// </note>
    #[derive(std::clone::Clone, std::fmt::Debug)]
    pub struct ListApplications<
        C = aws_smithy_client::erase::DynConnector,
        M = crate::middleware::DefaultMiddleware,
        R = aws_smithy_client::retry::Standard,
    > {
        handle: std::sync::Arc<super::Handle<C, M, R>>,
        inner: crate::input::list_applications_input::Builder,
    }
    impl<C, M, R> ListApplications<C, M, R>
    where
        C: aws_smithy_client::bounds::SmithyConnector,
        M: aws_smithy_client::bounds::SmithyMiddleware<C>,
        R: aws_smithy_client::retry::NewRequestPolicy,
    {
        /// Creates a new `ListApplications`.
        pub(crate) fn new(handle: std::sync::Arc<super::Handle<C, M, R>>) -> Self {
            Self {
                handle,
                inner: Default::default(),
            }
        }

        /// Sends the request and returns the response.
        ///
        /// If an error occurs, an `SdkError` will be returned with additional details that
        /// can be matched against.
        ///
        /// By default, any retryable failures will be retried twice. Retry behavior
        /// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
        /// set when configuring the client.
        pub async fn send(
            self,
        ) -> std::result::Result<
            crate::output::ListApplicationsOutput,
            aws_smithy_http::result::SdkError<crate::error::ListApplicationsError>,
        >
        where
            R::Policy: aws_smithy_client::bounds::SmithyRetryPolicy<
                crate::input::ListApplicationsInputOperationOutputAlias,
                crate::output::ListApplicationsOutput,
                crate::error::ListApplicationsError,
                crate::input::ListApplicationsInputOperationRetryAlias,
            >,
        {
            let op = self
                .inner
                .build()
                .map_err(|err| aws_smithy_http::result::SdkError::ConstructionFailure(err.into()))?
                .make_operation(&self.handle.conf)
                .await
                .map_err(|err| {
                    aws_smithy_http::result::SdkError::ConstructionFailure(err.into())
                })?;
            self.handle.client.call(op).await
        }
        /// Create a paginator for this request
        ///
        /// Paginators are used by calling [`send().await`](crate::paginator::ListApplicationsPaginator::send) which returns a [`Stream`](tokio_stream::Stream).
        pub fn into_paginator(self) -> crate::paginator::ListApplicationsPaginator<C, M, R> {
            crate::paginator::ListApplicationsPaginator::new(self.handle, self.inner)
        }
        /// <p>A token used to get the next set of results.</p>
        pub fn next_token(mut self, input: impl Into<std::string::String>) -> Self {
            self.inner = self.inner.next_token(input.into());
            self
        }
        /// <p>A token used to get the next set of results.</p>
        pub fn set_next_token(mut self, input: std::option::Option<std::string::String>) -> Self {
            self.inner = self.inner.set_next_token(input);
            self
        }
    }
    /// Fluent builder constructing a request to `ListTagsForResource`.
    ///
    /// <p>Lists the tags for the specified resource.</p> <note>
    /// <p>Fleet Hub for AWS IoT Device Management is in public preview and is subject to change.</p>
    /// </note>
    #[derive(std::clone::Clone, std::fmt::Debug)]
    pub struct ListTagsForResource<
        C = aws_smithy_client::erase::DynConnector,
        M = crate::middleware::DefaultMiddleware,
        R = aws_smithy_client::retry::Standard,
    > {
        handle: std::sync::Arc<super::Handle<C, M, R>>,
        inner: crate::input::list_tags_for_resource_input::Builder,
    }
    impl<C, M, R> ListTagsForResource<C, M, R>
    where
        C: aws_smithy_client::bounds::SmithyConnector,
        M: aws_smithy_client::bounds::SmithyMiddleware<C>,
        R: aws_smithy_client::retry::NewRequestPolicy,
    {
        /// Creates a new `ListTagsForResource`.
        pub(crate) fn new(handle: std::sync::Arc<super::Handle<C, M, R>>) -> Self {
            Self {
                handle,
                inner: Default::default(),
            }
        }

        /// Sends the request and returns the response.
        ///
        /// If an error occurs, an `SdkError` will be returned with additional details that
        /// can be matched against.
        ///
        /// By default, any retryable failures will be retried twice. Retry behavior
        /// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
        /// set when configuring the client.
        pub async fn send(
            self,
        ) -> std::result::Result<
            crate::output::ListTagsForResourceOutput,
            aws_smithy_http::result::SdkError<crate::error::ListTagsForResourceError>,
        >
        where
            R::Policy: aws_smithy_client::bounds::SmithyRetryPolicy<
                crate::input::ListTagsForResourceInputOperationOutputAlias,
                crate::output::ListTagsForResourceOutput,
                crate::error::ListTagsForResourceError,
                crate::input::ListTagsForResourceInputOperationRetryAlias,
            >,
        {
            let op = self
                .inner
                .build()
                .map_err(|err| aws_smithy_http::result::SdkError::ConstructionFailure(err.into()))?
                .make_operation(&self.handle.conf)
                .await
                .map_err(|err| {
                    aws_smithy_http::result::SdkError::ConstructionFailure(err.into())
                })?;
            self.handle.client.call(op).await
        }
        /// <p>The ARN of the resource.</p>
        pub fn resource_arn(mut self, input: impl Into<std::string::String>) -> Self {
            self.inner = self.inner.resource_arn(input.into());
            self
        }
        /// <p>The ARN of the resource.</p>
        pub fn set_resource_arn(mut self, input: std::option::Option<std::string::String>) -> Self {
            self.inner = self.inner.set_resource_arn(input);
            self
        }
    }
    /// Fluent builder constructing a request to `TagResource`.
    ///
    /// <p>Adds to or modifies the tags of the specified resource. Tags are metadata which can be used to manage a resource.</p> <note>
    /// <p>Fleet Hub for AWS IoT Device Management is in public preview and is subject to change.</p>
    /// </note>
    #[derive(std::clone::Clone, std::fmt::Debug)]
    pub struct TagResource<
        C = aws_smithy_client::erase::DynConnector,
        M = crate::middleware::DefaultMiddleware,
        R = aws_smithy_client::retry::Standard,
    > {
        handle: std::sync::Arc<super::Handle<C, M, R>>,
        inner: crate::input::tag_resource_input::Builder,
    }
    impl<C, M, R> TagResource<C, M, R>
    where
        C: aws_smithy_client::bounds::SmithyConnector,
        M: aws_smithy_client::bounds::SmithyMiddleware<C>,
        R: aws_smithy_client::retry::NewRequestPolicy,
    {
        /// Creates a new `TagResource`.
        pub(crate) fn new(handle: std::sync::Arc<super::Handle<C, M, R>>) -> Self {
            Self {
                handle,
                inner: Default::default(),
            }
        }

        /// Sends the request and returns the response.
        ///
        /// If an error occurs, an `SdkError` will be returned with additional details that
        /// can be matched against.
        ///
        /// By default, any retryable failures will be retried twice. Retry behavior
        /// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
        /// set when configuring the client.
        pub async fn send(
            self,
        ) -> std::result::Result<
            crate::output::TagResourceOutput,
            aws_smithy_http::result::SdkError<crate::error::TagResourceError>,
        >
        where
            R::Policy: aws_smithy_client::bounds::SmithyRetryPolicy<
                crate::input::TagResourceInputOperationOutputAlias,
                crate::output::TagResourceOutput,
                crate::error::TagResourceError,
                crate::input::TagResourceInputOperationRetryAlias,
            >,
        {
            let op = self
                .inner
                .build()
                .map_err(|err| aws_smithy_http::result::SdkError::ConstructionFailure(err.into()))?
                .make_operation(&self.handle.conf)
                .await
                .map_err(|err| {
                    aws_smithy_http::result::SdkError::ConstructionFailure(err.into())
                })?;
            self.handle.client.call(op).await
        }
        /// <p>The ARN of the resource.</p>
        pub fn resource_arn(mut self, input: impl Into<std::string::String>) -> Self {
            self.inner = self.inner.resource_arn(input.into());
            self
        }
        /// <p>The ARN of the resource.</p>
        pub fn set_resource_arn(mut self, input: std::option::Option<std::string::String>) -> Self {
            self.inner = self.inner.set_resource_arn(input);
            self
        }
        /// Adds a key-value pair to `tags`.
        ///
        /// To override the contents of this collection use [`set_tags`](Self::set_tags).
        ///
        /// <p>The new or modified tags for the resource.</p>
        pub fn tags(
            mut self,
            k: impl Into<std::string::String>,
            v: impl Into<std::string::String>,
        ) -> Self {
            self.inner = self.inner.tags(k.into(), v.into());
            self
        }
        /// <p>The new or modified tags for the resource.</p>
        pub fn set_tags(
            mut self,
            input: std::option::Option<
                std::collections::HashMap<std::string::String, std::string::String>,
            >,
        ) -> Self {
            self.inner = self.inner.set_tags(input);
            self
        }
    }
    /// Fluent builder constructing a request to `UntagResource`.
    ///
    /// <p>Removes the specified tags (metadata) from the resource.</p> <note>
    /// <p>Fleet Hub for AWS IoT Device Management is in public preview and is subject to change.</p>
    /// </note>
    #[derive(std::clone::Clone, std::fmt::Debug)]
    pub struct UntagResource<
        C = aws_smithy_client::erase::DynConnector,
        M = crate::middleware::DefaultMiddleware,
        R = aws_smithy_client::retry::Standard,
    > {
        handle: std::sync::Arc<super::Handle<C, M, R>>,
        inner: crate::input::untag_resource_input::Builder,
    }
    impl<C, M, R> UntagResource<C, M, R>
    where
        C: aws_smithy_client::bounds::SmithyConnector,
        M: aws_smithy_client::bounds::SmithyMiddleware<C>,
        R: aws_smithy_client::retry::NewRequestPolicy,
    {
        /// Creates a new `UntagResource`.
        pub(crate) fn new(handle: std::sync::Arc<super::Handle<C, M, R>>) -> Self {
            Self {
                handle,
                inner: Default::default(),
            }
        }

        /// Sends the request and returns the response.
        ///
        /// If an error occurs, an `SdkError` will be returned with additional details that
        /// can be matched against.
        ///
        /// By default, any retryable failures will be retried twice. Retry behavior
        /// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
        /// set when configuring the client.
        pub async fn send(
            self,
        ) -> std::result::Result<
            crate::output::UntagResourceOutput,
            aws_smithy_http::result::SdkError<crate::error::UntagResourceError>,
        >
        where
            R::Policy: aws_smithy_client::bounds::SmithyRetryPolicy<
                crate::input::UntagResourceInputOperationOutputAlias,
                crate::output::UntagResourceOutput,
                crate::error::UntagResourceError,
                crate::input::UntagResourceInputOperationRetryAlias,
            >,
        {
            let op = self
                .inner
                .build()
                .map_err(|err| aws_smithy_http::result::SdkError::ConstructionFailure(err.into()))?
                .make_operation(&self.handle.conf)
                .await
                .map_err(|err| {
                    aws_smithy_http::result::SdkError::ConstructionFailure(err.into())
                })?;
            self.handle.client.call(op).await
        }
        /// <p>The ARN of the resource.</p>
        pub fn resource_arn(mut self, input: impl Into<std::string::String>) -> Self {
            self.inner = self.inner.resource_arn(input.into());
            self
        }
        /// <p>The ARN of the resource.</p>
        pub fn set_resource_arn(mut self, input: std::option::Option<std::string::String>) -> Self {
            self.inner = self.inner.set_resource_arn(input);
            self
        }
        /// Appends an item to `tagKeys`.
        ///
        /// To override the contents of this collection use [`set_tag_keys`](Self::set_tag_keys).
        ///
        /// <p>A list of the keys of the tags to be removed from the resource.</p>
        pub fn tag_keys(mut self, input: impl Into<std::string::String>) -> Self {
            self.inner = self.inner.tag_keys(input.into());
            self
        }
        /// <p>A list of the keys of the tags to be removed from the resource.</p>
        pub fn set_tag_keys(
            mut self,
            input: std::option::Option<std::vec::Vec<std::string::String>>,
        ) -> Self {
            self.inner = self.inner.set_tag_keys(input);
            self
        }
    }
    /// Fluent builder constructing a request to `UpdateApplication`.
    ///
    /// <p>Updates information about a Fleet Hub for a AWS IoT Device Management web application.</p> <note>
    /// <p>Fleet Hub for AWS IoT Device Management is in public preview and is subject to change.</p>
    /// </note>
    #[derive(std::clone::Clone, std::fmt::Debug)]
    pub struct UpdateApplication<
        C = aws_smithy_client::erase::DynConnector,
        M = crate::middleware::DefaultMiddleware,
        R = aws_smithy_client::retry::Standard,
    > {
        handle: std::sync::Arc<super::Handle<C, M, R>>,
        inner: crate::input::update_application_input::Builder,
    }
    impl<C, M, R> UpdateApplication<C, M, R>
    where
        C: aws_smithy_client::bounds::SmithyConnector,
        M: aws_smithy_client::bounds::SmithyMiddleware<C>,
        R: aws_smithy_client::retry::NewRequestPolicy,
    {
        /// Creates a new `UpdateApplication`.
        pub(crate) fn new(handle: std::sync::Arc<super::Handle<C, M, R>>) -> Self {
            Self {
                handle,
                inner: Default::default(),
            }
        }

        /// Sends the request and returns the response.
        ///
        /// If an error occurs, an `SdkError` will be returned with additional details that
        /// can be matched against.
        ///
        /// By default, any retryable failures will be retried twice. Retry behavior
        /// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
        /// set when configuring the client.
        pub async fn send(
            self,
        ) -> std::result::Result<
            crate::output::UpdateApplicationOutput,
            aws_smithy_http::result::SdkError<crate::error::UpdateApplicationError>,
        >
        where
            R::Policy: aws_smithy_client::bounds::SmithyRetryPolicy<
                crate::input::UpdateApplicationInputOperationOutputAlias,
                crate::output::UpdateApplicationOutput,
                crate::error::UpdateApplicationError,
                crate::input::UpdateApplicationInputOperationRetryAlias,
            >,
        {
            let op = self
                .inner
                .build()
                .map_err(|err| aws_smithy_http::result::SdkError::ConstructionFailure(err.into()))?
                .make_operation(&self.handle.conf)
                .await
                .map_err(|err| {
                    aws_smithy_http::result::SdkError::ConstructionFailure(err.into())
                })?;
            self.handle.client.call(op).await
        }
        /// <p>The unique Id of the web application.</p>
        pub fn application_id(mut self, input: impl Into<std::string::String>) -> Self {
            self.inner = self.inner.application_id(input.into());
            self
        }
        /// <p>The unique Id of the web application.</p>
        pub fn set_application_id(
            mut self,
            input: std::option::Option<std::string::String>,
        ) -> Self {
            self.inner = self.inner.set_application_id(input);
            self
        }
        /// <p>The name of the web application.</p>
        pub fn application_name(mut self, input: impl Into<std::string::String>) -> Self {
            self.inner = self.inner.application_name(input.into());
            self
        }
        /// <p>The name of the web application.</p>
        pub fn set_application_name(
            mut self,
            input: std::option::Option<std::string::String>,
        ) -> Self {
            self.inner = self.inner.set_application_name(input);
            self
        }
        /// <p>An optional description of the web application.</p>
        pub fn application_description(mut self, input: impl Into<std::string::String>) -> Self {
            self.inner = self.inner.application_description(input.into());
            self
        }
        /// <p>An optional description of the web application.</p>
        pub fn set_application_description(
            mut self,
            input: std::option::Option<std::string::String>,
        ) -> Self {
            self.inner = self.inner.set_application_description(input);
            self
        }
        /// <p>A unique case-sensitive identifier that you can provide to ensure the idempotency of the request. Don't reuse this client token if a new idempotent request is required.</p>
        pub fn client_token(mut self, input: impl Into<std::string::String>) -> Self {
            self.inner = self.inner.client_token(input.into());
            self
        }
        /// <p>A unique case-sensitive identifier that you can provide to ensure the idempotency of the request. Don't reuse this client token if a new idempotent request is required.</p>
        pub fn set_client_token(mut self, input: std::option::Option<std::string::String>) -> Self {
            self.inner = self.inner.set_client_token(input);
            self
        }
    }
}

impl<C> Client<C, crate::middleware::DefaultMiddleware, aws_smithy_client::retry::Standard> {
    /// Creates a client with the given service config and connector override.
    pub fn from_conf_conn(conf: crate::Config, conn: C) -> Self {
        let retry_config = conf.retry_config.as_ref().cloned().unwrap_or_default();
        let timeout_config = conf.timeout_config.as_ref().cloned().unwrap_or_default();
        let sleep_impl = conf.sleep_impl.clone();
        let mut builder = aws_smithy_client::Builder::new()
            .connector(conn)
            .middleware(crate::middleware::DefaultMiddleware::new());
        builder.set_retry_config(retry_config.into());
        builder.set_timeout_config(timeout_config);
        if let Some(sleep_impl) = sleep_impl {
            builder.set_sleep_impl(Some(sleep_impl));
        }
        let client = builder.build();
        Self {
            handle: std::sync::Arc::new(Handle { client, conf }),
        }
    }
}
impl
    Client<
        aws_smithy_client::erase::DynConnector,
        crate::middleware::DefaultMiddleware,
        aws_smithy_client::retry::Standard,
    >
{
    /// Creates a new client from a shared config.
    #[cfg(any(feature = "rustls", feature = "native-tls"))]
    pub fn new(config: &aws_types::config::Config) -> Self {
        Self::from_conf(config.into())
    }

    /// Creates a new client from the service [`Config`](crate::Config).
    #[cfg(any(feature = "rustls", feature = "native-tls"))]
    pub fn from_conf(conf: crate::Config) -> Self {
        let retry_config = conf.retry_config.as_ref().cloned().unwrap_or_default();
        let timeout_config = conf.timeout_config.as_ref().cloned().unwrap_or_default();
        let sleep_impl = conf.sleep_impl.clone();
        let mut builder = aws_smithy_client::Builder::dyn_https()
            .middleware(crate::middleware::DefaultMiddleware::new());
        builder.set_retry_config(retry_config.into());
        builder.set_timeout_config(timeout_config);
        // the builder maintains a try-state. To avoid suppressing the warning when sleep is unset,
        // only set it if we actually have a sleep impl.
        if let Some(sleep_impl) = sleep_impl {
            builder.set_sleep_impl(Some(sleep_impl));
        }
        let client = builder.build();

        Self {
            handle: std::sync::Arc::new(Handle { client, conf }),
        }
    }
}