aws_sdk_internetmonitor/

lib.rs

#![allow(deprecated)]
#![allow(unknown_lints)]
#![allow(clippy::module_inception)]
#![allow(clippy::upper_case_acronyms)]
#![allow(clippy::large_enum_variant)]
#![allow(clippy::wrong_self_convention)]
#![allow(clippy::should_implement_trait)]
#![allow(clippy::disallowed_names)]
#![allow(clippy::vec_init_then_push)]
#![allow(clippy::type_complexity)]
#![allow(clippy::needless_return)]
#![allow(clippy::derive_partial_eq_without_eq)]
#![allow(clippy::result_large_err)]
#![allow(clippy::unnecessary_map_on_constructor)]
#![allow(clippy::deprecated_semver)]
#![allow(rustdoc::bare_urls)]
#![allow(rustdoc::redundant_explicit_links)]
#![allow(rustdoc::invalid_html_tags)]
#![forbid(unsafe_code)]
#![warn(missing_docs)]
#![cfg_attr(docsrs, feature(doc_cfg))]
//! Amazon CloudWatch Internet Monitor provides visibility into how internet issues impact the performance and availability between your applications hosted on Amazon Web Services and your end users. It can reduce the time it takes for you to diagnose internet issues from days to minutes. Internet Monitor uses the connectivity data that Amazon Web Services captures from its global networking footprint to calculate a baseline of performance and availability for internet traffic. This is the same data that Amazon Web Services uses to monitor internet uptime and availability. With those measurements as a baseline, Internet Monitor raises awareness for you when there are significant problems for your end users in the different geographic locations where your application runs.
//!
//! Internet Monitor publishes internet measurements to CloudWatch Logs and CloudWatch Metrics, to easily support using CloudWatch tools with health information for geographies and networks specific to your application. Internet Monitor sends health events to Amazon EventBridge so that you can set up notifications. If an issue is caused by the Amazon Web Services network, you also automatically receive an Amazon Web Services Health Dashboard notification with the steps that Amazon Web Services is taking to mitigate the problem.
//!
//! To use Internet Monitor, you create a _monitor_ and associate your application's resources with it - VPCs, NLBs, CloudFront distributions, or WorkSpaces directories - so Internet Monitor can determine where your application's internet traffic is. Internet Monitor then provides internet measurements from Amazon Web Services that are specific to the locations and ASNs (typically, internet service providers or ISPs) that communicate with your application.
//!
//! For more information, see [Using Amazon CloudWatch Internet Monitor](https://docs.aws.amazon.com/AmazonCloudWatch/latest/monitoring/CloudWatch-InternetMonitor.html) in the _Amazon CloudWatch User Guide_.
//!
//! ## Getting Started
//!
//! > Examples are available for many services and operations, check out the
//! > [usage examples](https://github.com/awsdocs/aws-doc-sdk-examples/tree/main/rustv1).
//!
//! The SDK provides one crate per AWS service. You must add [Tokio](https://crates.io/crates/tokio)
//! as a dependency within your Rust project to execute asynchronous code. To add `aws-sdk-internetmonitor` to
//! your project, add the following to your **Cargo.toml** file:
//!
//! ```toml
//! [dependencies]
//! aws-config = { version = "1.1.7", features = ["behavior-version-latest"] }
//! aws-sdk-internetmonitor = "1.91.0"
//! tokio = { version = "1", features = ["full"] }
//! ```
//!
//! Then in code, a client can be created with the following:
//!
//! ```rust,no_run
//! use aws_sdk_internetmonitor as internetmonitor;
//!
//! #[::tokio::main]
//! async fn main() -> Result<(), internetmonitor::Error> {
//!     let config = aws_config::load_from_env().await;
//!     let client = aws_sdk_internetmonitor::Client::new(&config);
//!
//!     // ... make some calls with the client
//!
//!     Ok(())
//! }
//! ```
//!
//! See the [client documentation](https://docs.rs/aws-sdk-internetmonitor/latest/aws_sdk_internetmonitor/client/struct.Client.html)
//! for information on what calls can be made, and the inputs and outputs for each of those calls.
//!
//! ## Using the SDK
//!
//! Until the SDK is released, we will be adding information about using the SDK to the
//! [Developer Guide](https://docs.aws.amazon.com/sdk-for-rust/latest/dg/welcome.html). Feel free to suggest
//! additional sections for the guide by opening an issue and describing what you are trying to do.
//!
//! ## Getting Help
//!
//! * [GitHub discussions](https://github.com/awslabs/aws-sdk-rust/discussions) - For ideas, RFCs & general questions
//! * [GitHub issues](https://github.com/awslabs/aws-sdk-rust/issues/new/choose) - For bug reports & feature requests
//! * [Generated Docs (latest version)](https://awslabs.github.io/aws-sdk-rust/)
//! * [Usage examples](https://github.com/awsdocs/aws-doc-sdk-examples/tree/main/rustv1)
//!
//!
//! # Crate Organization
//!
//! The entry point for most customers will be [`Client`], which exposes one method for each API
//! offered by Amazon CloudWatch Internet Monitor. The return value of each of these methods is a "fluent builder",
//! where the different inputs for that API are added by builder-style function call chaining,
//! followed by calling `send()` to get a [`Future`](std::future::Future) that will result in
//! either a successful output or a [`SdkError`](crate::error::SdkError).
//!
//! Some of these API inputs may be structs or enums to provide more complex structured information.
//! These structs and enums live in [`types`](crate::types). There are some simpler types for
//! representing data such as date times or binary blobs that live in [`primitives`](crate::primitives).
//!
//! All types required to configure a client via the [`Config`](crate::Config) struct live
//! in [`config`](crate::config).
//!
//! The [`operation`](crate::operation) module has a submodule for every API, and in each submodule
//! is the input, output, and error type for that API, as well as builders to construct each of those.
//!
//! There is a top-level [`Error`](crate::Error) type that encompasses all the errors that the
//! client can return. Any other error type can be converted to this `Error` type via the
//! [`From`](std::convert::From) trait.
//!
//! The other modules within this crate are not required for normal usage.

// Code generated by software.amazon.smithy.rust.codegen.smithy-rs. DO NOT EDIT.
pub use error_meta::Error;

#[doc(inline)]
pub use config::Config;

/// Client for calling Amazon CloudWatch Internet Monitor.
/// ## Constructing a `Client`
///
/// A [`Config`] is required to construct a client. For most use cases, the [`aws-config`]
/// crate should be used to automatically resolve this config using
/// [`aws_config::load_from_env()`], since this will resolve an [`SdkConfig`] which can be shared
/// across multiple different AWS SDK clients. This config resolution process can be customized
/// by calling [`aws_config::from_env()`] instead, which returns a [`ConfigLoader`] that uses
/// the [builder pattern] to customize the default config.
///
/// In the simplest case, creating a client looks as follows:
/// ```rust,no_run
/// # async fn wrapper() {
/// let config = aws_config::load_from_env().await;
/// let client = aws_sdk_internetmonitor::Client::new(&config);
/// # }
/// ```
///
/// Occasionally, SDKs may have additional service-specific values that can be set on the [`Config`] that
/// is absent from [`SdkConfig`], or slightly different settings for a specific client may be desired.
/// The [`Builder`](crate::config::Builder) struct implements `From<&SdkConfig>`, so setting these specific settings can be
/// done as follows:
///
/// ```rust,no_run
/// # async fn wrapper() {
/// let sdk_config = ::aws_config::load_from_env().await;
/// let config = aws_sdk_internetmonitor::config::Builder::from(&sdk_config)
/// # /*
///     .some_service_specific_setting("value")
/// # */
///     .build();
/// # }
/// ```
///
/// See the [`aws-config` docs] and [`Config`] for more information on customizing configuration.
///
/// _Note:_ Client construction is expensive due to connection thread pool initialization, and should
/// be done once at application start-up.
///
/// [`Config`]: crate::Config
/// [`ConfigLoader`]: https://docs.rs/aws-config/*/aws_config/struct.ConfigLoader.html
/// [`SdkConfig`]: https://docs.rs/aws-config/*/aws_config/struct.SdkConfig.html
/// [`aws-config` docs]: https://docs.rs/aws-config/*
/// [`aws-config`]: https://crates.io/crates/aws-config
/// [`aws_config::from_env()`]: https://docs.rs/aws-config/*/aws_config/fn.from_env.html
/// [`aws_config::load_from_env()`]: https://docs.rs/aws-config/*/aws_config/fn.load_from_env.html
/// [builder pattern]: https://rust-lang.github.io/api-guidelines/type-safety.html#builders-enable-construction-of-complex-values-c-builder
/// # Using the `Client`
///
/// A client has a function for every operation that can be performed by the service.
/// For example, the [`CreateMonitor`](crate::operation::create_monitor) operation has
/// a [`Client::create_monitor`], function which returns a builder for that operation.
/// The fluent builder ultimately has a `send()` function that returns an async future that
/// returns a result, as illustrated below:
///
/// ```rust,ignore
/// let result = client.create_monitor()
///     .monitor_name("example")
///     .send()
///     .await;
/// ```
///
/// The underlying HTTP requests that get made by this can be modified with the `customize_operation`
/// function on the fluent builder. See the [`customize`](crate::client::customize) module for more
/// information.
pub mod client;

/// Configuration for Amazon CloudWatch Internet Monitor.
pub mod config;

/// Common errors and error handling utilities.
pub mod error;

mod error_meta;

/// Information about this crate.
pub mod meta;

/// All operations that this crate can perform.
pub mod operation;

/// Primitives such as `Blob` or `DateTime` used by other types.
pub mod primitives;

/// Data structures used by operation inputs/outputs.
pub mod types;

pub(crate) mod client_idempotency_token;

mod idempotency_token;

pub(crate) mod protocol_serde;

mod sdk_feature_tracker;

mod serialization_settings;

mod endpoint_lib;

mod lens;

mod serde_util;

mod json_errors;

#[doc(inline)]
pub use client::Client;