// Code generated by software.amazon.smithy.rust.codegen.smithy-rs. DO NOT EDIT.
#[allow(missing_docs)] // documentation missing in model
#[non_exhaustive]
#[derive(::std::clone::Clone, ::std::cmp::PartialEq, ::std::fmt::Debug)]
pub struct CreateComponentInput {
    /// <p>The name of the component.</p>
    pub name: ::std::option::Option<::std::string::String>,
    /// <p>The semantic version of the component. This version follows the semantic version syntax.</p><note>
    /// <p>The semantic version has four nodes: <major>
    /// .
    /// <minor>
    /// .
    /// <patch>
    /// /
    /// <build>
    /// . You can assign values for the first three, and can filter on all of them.
    /// </build>
    /// </patch>
    /// </minor>
    /// </major></p>
    /// <p><b>Assignment:</b> For the first three nodes you can assign any positive integer value, including zero, with an upper limit of 2^30-1, or 1073741823 for each node. Image Builder automatically assigns the build number to the fourth node.</p>
    /// <p><b>Patterns:</b> You can use any numeric pattern that adheres to the assignment requirements for the nodes that you can assign. For example, you might choose a software version pattern, such as 1.0.0, or a date, such as 2021.01.01.</p>
    /// </note>
    pub semantic_version: ::std::option::Option<::std::string::String>,
    /// <p>Describes the contents of the component.</p>
    pub description: ::std::option::Option<::std::string::String>,
    /// <p>The change description of the component. Describes what change has been made in this version, or what makes this version different from other versions of the component.</p>
    pub change_description: ::std::option::Option<::std::string::String>,
    /// <p>The operating system platform of the component.</p>
    pub platform: ::std::option::Option<crate::types::Platform>,
    /// <p>The operating system (OS) version supported by the component. If the OS information is available, a prefix match is performed against the base image OS version during image recipe creation.</p>
    pub supported_os_versions: ::std::option::Option<::std::vec::Vec<::std::string::String>>,
    /// <p>Component <code>data</code> contains inline YAML document content for the component. Alternatively, you can specify the <code>uri</code> of a YAML document file stored in Amazon S3. However, you cannot specify both properties.</p>
    pub data: ::std::option::Option<::std::string::String>,
    /// <p>The <code>uri</code> of a YAML component document file. This must be an S3 URL (<code>s3://bucket/key</code>), and the requester must have permission to access the S3 bucket it points to. If you use Amazon S3, you can specify component content up to your service quota.</p>
    /// <p>Alternatively, you can specify the YAML document inline, using the component <code>data</code> property. You cannot specify both properties.</p>
    pub uri: ::std::option::Option<::std::string::String>,
    /// <p>The ID of the KMS key that is used to encrypt this component.</p>
    pub kms_key_id: ::std::option::Option<::std::string::String>,
    /// <p>The tags that apply to the component.</p>
    pub tags: ::std::option::Option<::std::collections::HashMap<::std::string::String, ::std::string::String>>,
    /// <p>Unique, case-sensitive identifier you provide to ensure idempotency of the request. For more information, see <a href="https://docs.aws.amazon.com/AWSEC2/latest/APIReference/Run_Instance_Idempotency.html">Ensuring idempotency</a> in the <i>Amazon EC2 API Reference</i>.</p>
    pub client_token: ::std::option::Option<::std::string::String>,
}
impl CreateComponentInput {
    /// <p>The name of the component.</p>
    pub fn name(&self) -> ::std::option::Option<&str> {
        self.name.as_deref()
    }
    /// <p>The semantic version of the component. This version follows the semantic version syntax.</p><note>
    /// <p>The semantic version has four nodes: <major>
    /// .
    /// <minor>
    /// .
    /// <patch>
    /// /
    /// <build>
    /// . You can assign values for the first three, and can filter on all of them.
    /// </build>
    /// </patch>
    /// </minor>
    /// </major></p>
    /// <p><b>Assignment:</b> For the first three nodes you can assign any positive integer value, including zero, with an upper limit of 2^30-1, or 1073741823 for each node. Image Builder automatically assigns the build number to the fourth node.</p>
    /// <p><b>Patterns:</b> You can use any numeric pattern that adheres to the assignment requirements for the nodes that you can assign. For example, you might choose a software version pattern, such as 1.0.0, or a date, such as 2021.01.01.</p>
    /// </note>
    pub fn semantic_version(&self) -> ::std::option::Option<&str> {
        self.semantic_version.as_deref()
    }
    /// <p>Describes the contents of the component.</p>
    pub fn description(&self) -> ::std::option::Option<&str> {
        self.description.as_deref()
    }
    /// <p>The change description of the component. Describes what change has been made in this version, or what makes this version different from other versions of the component.</p>
    pub fn change_description(&self) -> ::std::option::Option<&str> {
        self.change_description.as_deref()
    }
    /// <p>The operating system platform of the component.</p>
    pub fn platform(&self) -> ::std::option::Option<&crate::types::Platform> {
        self.platform.as_ref()
    }
    /// <p>The operating system (OS) version supported by the component. If the OS information is available, a prefix match is performed against the base image OS version during image recipe creation.</p>
    ///
    /// If no value was sent for this field, a default will be set. If you want to determine if no value was sent, use `.supported_os_versions.is_none()`.
    pub fn supported_os_versions(&self) -> &[::std::string::String] {
        self.supported_os_versions.as_deref().unwrap_or_default()
    }
    /// <p>Component <code>data</code> contains inline YAML document content for the component. Alternatively, you can specify the <code>uri</code> of a YAML document file stored in Amazon S3. However, you cannot specify both properties.</p>
    pub fn data(&self) -> ::std::option::Option<&str> {
        self.data.as_deref()
    }
    /// <p>The <code>uri</code> of a YAML component document file. This must be an S3 URL (<code>s3://bucket/key</code>), and the requester must have permission to access the S3 bucket it points to. If you use Amazon S3, you can specify component content up to your service quota.</p>
    /// <p>Alternatively, you can specify the YAML document inline, using the component <code>data</code> property. You cannot specify both properties.</p>
    pub fn uri(&self) -> ::std::option::Option<&str> {
        self.uri.as_deref()
    }
    /// <p>The ID of the KMS key that is used to encrypt this component.</p>
    pub fn kms_key_id(&self) -> ::std::option::Option<&str> {
        self.kms_key_id.as_deref()
    }
    /// <p>The tags that apply to the component.</p>
    pub fn tags(&self) -> ::std::option::Option<&::std::collections::HashMap<::std::string::String, ::std::string::String>> {
        self.tags.as_ref()
    }
    /// <p>Unique, case-sensitive identifier you provide to ensure idempotency of the request. For more information, see <a href="https://docs.aws.amazon.com/AWSEC2/latest/APIReference/Run_Instance_Idempotency.html">Ensuring idempotency</a> in the <i>Amazon EC2 API Reference</i>.</p>
    pub fn client_token(&self) -> ::std::option::Option<&str> {
        self.client_token.as_deref()
    }
}
impl CreateComponentInput {
    /// Creates a new builder-style object to manufacture [`CreateComponentInput`](crate::operation::create_component::CreateComponentInput).
    pub fn builder() -> crate::operation::create_component::builders::CreateComponentInputBuilder {
        crate::operation::create_component::builders::CreateComponentInputBuilder::default()
    }
}

/// A builder for [`CreateComponentInput`](crate::operation::create_component::CreateComponentInput).
#[non_exhaustive]
#[derive(::std::clone::Clone, ::std::cmp::PartialEq, ::std::default::Default, ::std::fmt::Debug)]
pub struct CreateComponentInputBuilder {
    pub(crate) name: ::std::option::Option<::std::string::String>,
    pub(crate) semantic_version: ::std::option::Option<::std::string::String>,
    pub(crate) description: ::std::option::Option<::std::string::String>,
    pub(crate) change_description: ::std::option::Option<::std::string::String>,
    pub(crate) platform: ::std::option::Option<crate::types::Platform>,
    pub(crate) supported_os_versions: ::std::option::Option<::std::vec::Vec<::std::string::String>>,
    pub(crate) data: ::std::option::Option<::std::string::String>,
    pub(crate) uri: ::std::option::Option<::std::string::String>,
    pub(crate) kms_key_id: ::std::option::Option<::std::string::String>,
    pub(crate) tags: ::std::option::Option<::std::collections::HashMap<::std::string::String, ::std::string::String>>,
    pub(crate) client_token: ::std::option::Option<::std::string::String>,
}
impl CreateComponentInputBuilder {
    /// <p>The name of the component.</p>
    /// This field is required.
    pub fn name(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
        self.name = ::std::option::Option::Some(input.into());
        self
    }
    /// <p>The name of the component.</p>
    pub fn set_name(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
        self.name = input;
        self
    }
    /// <p>The name of the component.</p>
    pub fn get_name(&self) -> &::std::option::Option<::std::string::String> {
        &self.name
    }
    /// <p>The semantic version of the component. This version follows the semantic version syntax.</p><note>
    /// <p>The semantic version has four nodes: <major>
    /// .
    /// <minor>
    /// .
    /// <patch>
    /// /
    /// <build>
    /// . You can assign values for the first three, and can filter on all of them.
    /// </build>
    /// </patch>
    /// </minor>
    /// </major></p>
    /// <p><b>Assignment:</b> For the first three nodes you can assign any positive integer value, including zero, with an upper limit of 2^30-1, or 1073741823 for each node. Image Builder automatically assigns the build number to the fourth node.</p>
    /// <p><b>Patterns:</b> You can use any numeric pattern that adheres to the assignment requirements for the nodes that you can assign. For example, you might choose a software version pattern, such as 1.0.0, or a date, such as 2021.01.01.</p>
    /// </note>
    /// This field is required.
    pub fn semantic_version(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
        self.semantic_version = ::std::option::Option::Some(input.into());
        self
    }
    /// <p>The semantic version of the component. This version follows the semantic version syntax.</p><note>
    /// <p>The semantic version has four nodes: <major>
    /// .
    /// <minor>
    /// .
    /// <patch>
    /// /
    /// <build>
    /// . You can assign values for the first three, and can filter on all of them.
    /// </build>
    /// </patch>
    /// </minor>
    /// </major></p>
    /// <p><b>Assignment:</b> For the first three nodes you can assign any positive integer value, including zero, with an upper limit of 2^30-1, or 1073741823 for each node. Image Builder automatically assigns the build number to the fourth node.</p>
    /// <p><b>Patterns:</b> You can use any numeric pattern that adheres to the assignment requirements for the nodes that you can assign. For example, you might choose a software version pattern, such as 1.0.0, or a date, such as 2021.01.01.</p>
    /// </note>
    pub fn set_semantic_version(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
        self.semantic_version = input;
        self
    }
    /// <p>The semantic version of the component. This version follows the semantic version syntax.</p><note>
    /// <p>The semantic version has four nodes: <major>
    /// .
    /// <minor>
    /// .
    /// <patch>
    /// /
    /// <build>
    /// . You can assign values for the first three, and can filter on all of them.
    /// </build>
    /// </patch>
    /// </minor>
    /// </major></p>
    /// <p><b>Assignment:</b> For the first three nodes you can assign any positive integer value, including zero, with an upper limit of 2^30-1, or 1073741823 for each node. Image Builder automatically assigns the build number to the fourth node.</p>
    /// <p><b>Patterns:</b> You can use any numeric pattern that adheres to the assignment requirements for the nodes that you can assign. For example, you might choose a software version pattern, such as 1.0.0, or a date, such as 2021.01.01.</p>
    /// </note>
    pub fn get_semantic_version(&self) -> &::std::option::Option<::std::string::String> {
        &self.semantic_version
    }
    /// <p>Describes the contents of the component.</p>
    pub fn description(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
        self.description = ::std::option::Option::Some(input.into());
        self
    }
    /// <p>Describes the contents of the component.</p>
    pub fn set_description(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
        self.description = input;
        self
    }
    /// <p>Describes the contents of the component.</p>
    pub fn get_description(&self) -> &::std::option::Option<::std::string::String> {
        &self.description
    }
    /// <p>The change description of the component. Describes what change has been made in this version, or what makes this version different from other versions of the component.</p>
    pub fn change_description(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
        self.change_description = ::std::option::Option::Some(input.into());
        self
    }
    /// <p>The change description of the component. Describes what change has been made in this version, or what makes this version different from other versions of the component.</p>
    pub fn set_change_description(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
        self.change_description = input;
        self
    }
    /// <p>The change description of the component. Describes what change has been made in this version, or what makes this version different from other versions of the component.</p>
    pub fn get_change_description(&self) -> &::std::option::Option<::std::string::String> {
        &self.change_description
    }
    /// <p>The operating system platform of the component.</p>
    /// This field is required.
    pub fn platform(mut self, input: crate::types::Platform) -> Self {
        self.platform = ::std::option::Option::Some(input);
        self
    }
    /// <p>The operating system platform of the component.</p>
    pub fn set_platform(mut self, input: ::std::option::Option<crate::types::Platform>) -> Self {
        self.platform = input;
        self
    }
    /// <p>The operating system platform of the component.</p>
    pub fn get_platform(&self) -> &::std::option::Option<crate::types::Platform> {
        &self.platform
    }
    /// Appends an item to `supported_os_versions`.
    ///
    /// To override the contents of this collection use [`set_supported_os_versions`](Self::set_supported_os_versions).
    ///
    /// <p>The operating system (OS) version supported by the component. If the OS information is available, a prefix match is performed against the base image OS version during image recipe creation.</p>
    pub fn supported_os_versions(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
        let mut v = self.supported_os_versions.unwrap_or_default();
        v.push(input.into());
        self.supported_os_versions = ::std::option::Option::Some(v);
        self
    }
    /// <p>The operating system (OS) version supported by the component. If the OS information is available, a prefix match is performed against the base image OS version during image recipe creation.</p>
    pub fn set_supported_os_versions(mut self, input: ::std::option::Option<::std::vec::Vec<::std::string::String>>) -> Self {
        self.supported_os_versions = input;
        self
    }
    /// <p>The operating system (OS) version supported by the component. If the OS information is available, a prefix match is performed against the base image OS version during image recipe creation.</p>
    pub fn get_supported_os_versions(&self) -> &::std::option::Option<::std::vec::Vec<::std::string::String>> {
        &self.supported_os_versions
    }
    /// <p>Component <code>data</code> contains inline YAML document content for the component. Alternatively, you can specify the <code>uri</code> of a YAML document file stored in Amazon S3. However, you cannot specify both properties.</p>
    pub fn data(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
        self.data = ::std::option::Option::Some(input.into());
        self
    }
    /// <p>Component <code>data</code> contains inline YAML document content for the component. Alternatively, you can specify the <code>uri</code> of a YAML document file stored in Amazon S3. However, you cannot specify both properties.</p>
    pub fn set_data(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
        self.data = input;
        self
    }
    /// <p>Component <code>data</code> contains inline YAML document content for the component. Alternatively, you can specify the <code>uri</code> of a YAML document file stored in Amazon S3. However, you cannot specify both properties.</p>
    pub fn get_data(&self) -> &::std::option::Option<::std::string::String> {
        &self.data
    }
    /// <p>The <code>uri</code> of a YAML component document file. This must be an S3 URL (<code>s3://bucket/key</code>), and the requester must have permission to access the S3 bucket it points to. If you use Amazon S3, you can specify component content up to your service quota.</p>
    /// <p>Alternatively, you can specify the YAML document inline, using the component <code>data</code> property. You cannot specify both properties.</p>
    pub fn uri(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
        self.uri = ::std::option::Option::Some(input.into());
        self
    }
    /// <p>The <code>uri</code> of a YAML component document file. This must be an S3 URL (<code>s3://bucket/key</code>), and the requester must have permission to access the S3 bucket it points to. If you use Amazon S3, you can specify component content up to your service quota.</p>
    /// <p>Alternatively, you can specify the YAML document inline, using the component <code>data</code> property. You cannot specify both properties.</p>
    pub fn set_uri(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
        self.uri = input;
        self
    }
    /// <p>The <code>uri</code> of a YAML component document file. This must be an S3 URL (<code>s3://bucket/key</code>), and the requester must have permission to access the S3 bucket it points to. If you use Amazon S3, you can specify component content up to your service quota.</p>
    /// <p>Alternatively, you can specify the YAML document inline, using the component <code>data</code> property. You cannot specify both properties.</p>
    pub fn get_uri(&self) -> &::std::option::Option<::std::string::String> {
        &self.uri
    }
    /// <p>The ID of the KMS key that is used to encrypt this component.</p>
    pub fn kms_key_id(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
        self.kms_key_id = ::std::option::Option::Some(input.into());
        self
    }
    /// <p>The ID of the KMS key that is used to encrypt this component.</p>
    pub fn set_kms_key_id(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
        self.kms_key_id = input;
        self
    }
    /// <p>The ID of the KMS key that is used to encrypt this component.</p>
    pub fn get_kms_key_id(&self) -> &::std::option::Option<::std::string::String> {
        &self.kms_key_id
    }
    /// Adds a key-value pair to `tags`.
    ///
    /// To override the contents of this collection use [`set_tags`](Self::set_tags).
    ///
    /// <p>The tags that apply to the component.</p>
    pub fn tags(mut self, k: impl ::std::convert::Into<::std::string::String>, v: impl ::std::convert::Into<::std::string::String>) -> Self {
        let mut hash_map = self.tags.unwrap_or_default();
        hash_map.insert(k.into(), v.into());
        self.tags = ::std::option::Option::Some(hash_map);
        self
    }
    /// <p>The tags that apply to the component.</p>
    pub fn set_tags(mut self, input: ::std::option::Option<::std::collections::HashMap<::std::string::String, ::std::string::String>>) -> Self {
        self.tags = input;
        self
    }
    /// <p>The tags that apply to the component.</p>
    pub fn get_tags(&self) -> &::std::option::Option<::std::collections::HashMap<::std::string::String, ::std::string::String>> {
        &self.tags
    }
    /// <p>Unique, case-sensitive identifier you provide to ensure idempotency of the request. For more information, see <a href="https://docs.aws.amazon.com/AWSEC2/latest/APIReference/Run_Instance_Idempotency.html">Ensuring idempotency</a> in the <i>Amazon EC2 API Reference</i>.</p>
    /// This field is required.
    pub fn client_token(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
        self.client_token = ::std::option::Option::Some(input.into());
        self
    }
    /// <p>Unique, case-sensitive identifier you provide to ensure idempotency of the request. For more information, see <a href="https://docs.aws.amazon.com/AWSEC2/latest/APIReference/Run_Instance_Idempotency.html">Ensuring idempotency</a> in the <i>Amazon EC2 API Reference</i>.</p>
    pub fn set_client_token(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
        self.client_token = input;
        self
    }
    /// <p>Unique, case-sensitive identifier you provide to ensure idempotency of the request. For more information, see <a href="https://docs.aws.amazon.com/AWSEC2/latest/APIReference/Run_Instance_Idempotency.html">Ensuring idempotency</a> in the <i>Amazon EC2 API Reference</i>.</p>
    pub fn get_client_token(&self) -> &::std::option::Option<::std::string::String> {
        &self.client_token
    }
    /// Consumes the builder and constructs a [`CreateComponentInput`](crate::operation::create_component::CreateComponentInput).
    pub fn build(
        self,
    ) -> ::std::result::Result<crate::operation::create_component::CreateComponentInput, ::aws_smithy_types::error::operation::BuildError> {
        ::std::result::Result::Ok(crate::operation::create_component::CreateComponentInput {
            name: self.name,
            semantic_version: self.semantic_version,
            description: self.description,
            change_description: self.change_description,
            platform: self.platform,
            supported_os_versions: self.supported_os_versions,
            data: self.data,
            uri: self.uri,
            kms_key_id: self.kms_key_id,
            tags: self.tags,
            client_token: self.client_token,
        })
    }
}