// Code generated by software.amazon.smithy.rust.codegen.smithy-rs. DO NOT EDIT.
pub use crate::operation::update_image_pipeline::_update_image_pipeline_output::UpdateImagePipelineOutputBuilder;

pub use crate::operation::update_image_pipeline::_update_image_pipeline_input::UpdateImagePipelineInputBuilder;

/// Fluent builder constructing a request to `UpdateImagePipeline`.
///
/// <p>Updates an image pipeline. Image pipelines enable you to automate the creation and distribution of images.</p> <note>
/// <p>UpdateImagePipeline does not support selective updates for the pipeline. You must specify all of the required properties in the update request, not just the properties that have changed.</p>
/// </note>
#[derive(std::clone::Clone, std::fmt::Debug)]
pub struct UpdateImagePipelineFluentBuilder {
    handle: std::sync::Arc<crate::client::Handle>,
    inner: crate::operation::update_image_pipeline::builders::UpdateImagePipelineInputBuilder,
}
impl UpdateImagePipelineFluentBuilder {
    /// Creates a new `UpdateImagePipeline`.
    pub(crate) fn new(handle: std::sync::Arc<crate::client::Handle>) -> Self {
        Self {
            handle,
            inner: Default::default(),
        }
    }
    /// Consume this builder, creating a customizable operation that can be modified before being
    /// sent. The operation's inner [http::Request] can be modified as well.
    pub async fn customize(
        self,
    ) -> std::result::Result<
        crate::client::customize::CustomizableOperation<
            crate::operation::update_image_pipeline::UpdateImagePipeline,
            aws_http::retry::AwsResponseRetryClassifier,
        >,
        aws_smithy_http::result::SdkError<
            crate::operation::update_image_pipeline::UpdateImagePipelineError,
        >,
    > {
        let handle = self.handle.clone();
        let operation = self
            .inner
            .build()
            .map_err(aws_smithy_http::result::SdkError::construction_failure)?
            .make_operation(&handle.conf)
            .await
            .map_err(aws_smithy_http::result::SdkError::construction_failure)?;
        Ok(crate::client::customize::CustomizableOperation { handle, operation })
    }

    /// Sends the request and returns the response.
    ///
    /// If an error occurs, an `SdkError` will be returned with additional details that
    /// can be matched against.
    ///
    /// By default, any retryable failures will be retried twice. Retry behavior
    /// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
    /// set when configuring the client.
    pub async fn send(
        self,
    ) -> std::result::Result<
        crate::operation::update_image_pipeline::UpdateImagePipelineOutput,
        aws_smithy_http::result::SdkError<
            crate::operation::update_image_pipeline::UpdateImagePipelineError,
        >,
    > {
        let op = self
            .inner
            .build()
            .map_err(aws_smithy_http::result::SdkError::construction_failure)?
            .make_operation(&self.handle.conf)
            .await
            .map_err(aws_smithy_http::result::SdkError::construction_failure)?;
        self.handle.client.call(op).await
    }
    /// <p>The Amazon Resource Name (ARN) of the image pipeline that you want to update.</p>
    pub fn image_pipeline_arn(mut self, input: impl Into<std::string::String>) -> Self {
        self.inner = self.inner.image_pipeline_arn(input.into());
        self
    }
    /// <p>The Amazon Resource Name (ARN) of the image pipeline that you want to update.</p>
    pub fn set_image_pipeline_arn(
        mut self,
        input: std::option::Option<std::string::String>,
    ) -> Self {
        self.inner = self.inner.set_image_pipeline_arn(input);
        self
    }
    /// <p>The description of the image pipeline.</p>
    pub fn description(mut self, input: impl Into<std::string::String>) -> Self {
        self.inner = self.inner.description(input.into());
        self
    }
    /// <p>The description of the image pipeline.</p>
    pub fn set_description(mut self, input: std::option::Option<std::string::String>) -> Self {
        self.inner = self.inner.set_description(input);
        self
    }
    /// <p>The Amazon Resource Name (ARN) of the image recipe that will be used to configure images updated by this image pipeline.</p>
    pub fn image_recipe_arn(mut self, input: impl Into<std::string::String>) -> Self {
        self.inner = self.inner.image_recipe_arn(input.into());
        self
    }
    /// <p>The Amazon Resource Name (ARN) of the image recipe that will be used to configure images updated by this image pipeline.</p>
    pub fn set_image_recipe_arn(mut self, input: std::option::Option<std::string::String>) -> Self {
        self.inner = self.inner.set_image_recipe_arn(input);
        self
    }
    /// <p>The Amazon Resource Name (ARN) of the container pipeline to update.</p>
    pub fn container_recipe_arn(mut self, input: impl Into<std::string::String>) -> Self {
        self.inner = self.inner.container_recipe_arn(input.into());
        self
    }
    /// <p>The Amazon Resource Name (ARN) of the container pipeline to update.</p>
    pub fn set_container_recipe_arn(
        mut self,
        input: std::option::Option<std::string::String>,
    ) -> Self {
        self.inner = self.inner.set_container_recipe_arn(input);
        self
    }
    /// <p>The Amazon Resource Name (ARN) of the infrastructure configuration that Image Builder uses to build images that this image pipeline has updated.</p>
    pub fn infrastructure_configuration_arn(
        mut self,
        input: impl Into<std::string::String>,
    ) -> Self {
        self.inner = self.inner.infrastructure_configuration_arn(input.into());
        self
    }
    /// <p>The Amazon Resource Name (ARN) of the infrastructure configuration that Image Builder uses to build images that this image pipeline has updated.</p>
    pub fn set_infrastructure_configuration_arn(
        mut self,
        input: std::option::Option<std::string::String>,
    ) -> Self {
        self.inner = self.inner.set_infrastructure_configuration_arn(input);
        self
    }
    /// <p>The Amazon Resource Name (ARN) of the distribution configuration that Image Builder uses to configure and distribute images that this image pipeline has updated.</p>
    pub fn distribution_configuration_arn(mut self, input: impl Into<std::string::String>) -> Self {
        self.inner = self.inner.distribution_configuration_arn(input.into());
        self
    }
    /// <p>The Amazon Resource Name (ARN) of the distribution configuration that Image Builder uses to configure and distribute images that this image pipeline has updated.</p>
    pub fn set_distribution_configuration_arn(
        mut self,
        input: std::option::Option<std::string::String>,
    ) -> Self {
        self.inner = self.inner.set_distribution_configuration_arn(input);
        self
    }
    /// <p>The image test configuration of the image pipeline.</p>
    pub fn image_tests_configuration(
        mut self,
        input: crate::types::ImageTestsConfiguration,
    ) -> Self {
        self.inner = self.inner.image_tests_configuration(input);
        self
    }
    /// <p>The image test configuration of the image pipeline.</p>
    pub fn set_image_tests_configuration(
        mut self,
        input: std::option::Option<crate::types::ImageTestsConfiguration>,
    ) -> Self {
        self.inner = self.inner.set_image_tests_configuration(input);
        self
    }
    /// <p>Collects additional information about the image being created, including the operating system (OS) version and package list. This information is used to enhance the overall experience of using EC2 Image Builder. Enabled by default.</p>
    pub fn enhanced_image_metadata_enabled(mut self, input: bool) -> Self {
        self.inner = self.inner.enhanced_image_metadata_enabled(input);
        self
    }
    /// <p>Collects additional information about the image being created, including the operating system (OS) version and package list. This information is used to enhance the overall experience of using EC2 Image Builder. Enabled by default.</p>
    pub fn set_enhanced_image_metadata_enabled(mut self, input: std::option::Option<bool>) -> Self {
        self.inner = self.inner.set_enhanced_image_metadata_enabled(input);
        self
    }
    /// <p>The schedule of the image pipeline.</p>
    pub fn schedule(mut self, input: crate::types::Schedule) -> Self {
        self.inner = self.inner.schedule(input);
        self
    }
    /// <p>The schedule of the image pipeline.</p>
    pub fn set_schedule(mut self, input: std::option::Option<crate::types::Schedule>) -> Self {
        self.inner = self.inner.set_schedule(input);
        self
    }
    /// <p>The status of the image pipeline.</p>
    pub fn status(mut self, input: crate::types::PipelineStatus) -> Self {
        self.inner = self.inner.status(input);
        self
    }
    /// <p>The status of the image pipeline.</p>
    pub fn set_status(mut self, input: std::option::Option<crate::types::PipelineStatus>) -> Self {
        self.inner = self.inner.set_status(input);
        self
    }
    /// <p>The idempotency token used to make this request idempotent.</p>
    pub fn client_token(mut self, input: impl Into<std::string::String>) -> Self {
        self.inner = self.inner.client_token(input.into());
        self
    }
    /// <p>The idempotency token used to make this request idempotent.</p>
    pub fn set_client_token(mut self, input: std::option::Option<std::string::String>) -> Self {
        self.inner = self.inner.set_client_token(input);
        self
    }
    /// <p>Contains settings for vulnerability scans.</p>
    pub fn image_scanning_configuration(
        mut self,
        input: crate::types::ImageScanningConfiguration,
    ) -> Self {
        self.inner = self.inner.image_scanning_configuration(input);
        self
    }
    /// <p>Contains settings for vulnerability scans.</p>
    pub fn set_image_scanning_configuration(
        mut self,
        input: std::option::Option<crate::types::ImageScanningConfiguration>,
    ) -> Self {
        self.inner = self.inner.set_image_scanning_configuration(input);
        self
    }
}