Struct aws_sdk_firehose::model::VpcConfiguration
source · [−]#[non_exhaustive]pub struct VpcConfiguration {
pub subnet_ids: Option<Vec<String>>,
pub role_arn: Option<String>,
pub security_group_ids: Option<Vec<String>>,
}
Expand description
The details of the VPC of the Amazon ES destination.
Fields (Non-exhaustive)
This struct is marked as non-exhaustive
Struct { .. }
syntax; cannot be matched against without a wildcard ..
; and struct update syntax will not work.subnet_ids: Option<Vec<String>>
The IDs of the subnets that you want Kinesis Data Firehose to use to create ENIs in the VPC of the Amazon ES destination. Make sure that the routing tables and inbound and outbound rules allow traffic to flow from the subnets whose IDs are specified here to the subnets that have the destination Amazon ES endpoints. Kinesis Data Firehose creates at least one ENI in each of the subnets that are specified here. Do not delete or modify these ENIs.
The number of ENIs that Kinesis Data Firehose creates in the subnets specified here scales up and down automatically based on throughput. To enable Kinesis Data Firehose to scale up the number of ENIs to match throughput, ensure that you have sufficient quota. To help you calculate the quota you need, assume that Kinesis Data Firehose can create up to three ENIs for this delivery stream for each of the subnets specified here. For more information about ENI quota, see Network Interfaces in the Amazon VPC Quotas topic.
role_arn: Option<String>
The ARN of the IAM role that you want the delivery stream to use to create endpoints in the destination VPC. You can use your existing Kinesis Data Firehose delivery role or you can specify a new role. In either case, make sure that the role trusts the Kinesis Data Firehose service principal and that it grants the following permissions:
-
ec2:DescribeVpcs
-
ec2:DescribeVpcAttribute
-
ec2:DescribeSubnets
-
ec2:DescribeSecurityGroups
-
ec2:DescribeNetworkInterfaces
-
ec2:CreateNetworkInterface
-
ec2:CreateNetworkInterfacePermission
-
ec2:DeleteNetworkInterface
If you revoke these permissions after you create the delivery stream, Kinesis Data Firehose can't scale out by creating more ENIs when necessary. You might therefore see a degradation in performance.
security_group_ids: Option<Vec<String>>
The IDs of the security groups that you want Kinesis Data Firehose to use when it creates ENIs in the VPC of the Amazon ES destination. You can use the same security group that the Amazon ES domain uses or different ones. If you specify different security groups here, ensure that they allow outbound HTTPS traffic to the Amazon ES domain's security group. Also ensure that the Amazon ES domain's security group allows HTTPS traffic from the security groups specified here. If you use the same security group for both your delivery stream and the Amazon ES domain, make sure the security group inbound rule allows HTTPS traffic. For more information about security group rules, see Security group rules in the Amazon VPC documentation.
Implementations
sourceimpl VpcConfiguration
impl VpcConfiguration
sourcepub fn subnet_ids(&self) -> Option<&[String]>
pub fn subnet_ids(&self) -> Option<&[String]>
The IDs of the subnets that you want Kinesis Data Firehose to use to create ENIs in the VPC of the Amazon ES destination. Make sure that the routing tables and inbound and outbound rules allow traffic to flow from the subnets whose IDs are specified here to the subnets that have the destination Amazon ES endpoints. Kinesis Data Firehose creates at least one ENI in each of the subnets that are specified here. Do not delete or modify these ENIs.
The number of ENIs that Kinesis Data Firehose creates in the subnets specified here scales up and down automatically based on throughput. To enable Kinesis Data Firehose to scale up the number of ENIs to match throughput, ensure that you have sufficient quota. To help you calculate the quota you need, assume that Kinesis Data Firehose can create up to three ENIs for this delivery stream for each of the subnets specified here. For more information about ENI quota, see Network Interfaces in the Amazon VPC Quotas topic.
sourcepub fn role_arn(&self) -> Option<&str>
pub fn role_arn(&self) -> Option<&str>
The ARN of the IAM role that you want the delivery stream to use to create endpoints in the destination VPC. You can use your existing Kinesis Data Firehose delivery role or you can specify a new role. In either case, make sure that the role trusts the Kinesis Data Firehose service principal and that it grants the following permissions:
-
ec2:DescribeVpcs
-
ec2:DescribeVpcAttribute
-
ec2:DescribeSubnets
-
ec2:DescribeSecurityGroups
-
ec2:DescribeNetworkInterfaces
-
ec2:CreateNetworkInterface
-
ec2:CreateNetworkInterfacePermission
-
ec2:DeleteNetworkInterface
If you revoke these permissions after you create the delivery stream, Kinesis Data Firehose can't scale out by creating more ENIs when necessary. You might therefore see a degradation in performance.
sourcepub fn security_group_ids(&self) -> Option<&[String]>
pub fn security_group_ids(&self) -> Option<&[String]>
The IDs of the security groups that you want Kinesis Data Firehose to use when it creates ENIs in the VPC of the Amazon ES destination. You can use the same security group that the Amazon ES domain uses or different ones. If you specify different security groups here, ensure that they allow outbound HTTPS traffic to the Amazon ES domain's security group. Also ensure that the Amazon ES domain's security group allows HTTPS traffic from the security groups specified here. If you use the same security group for both your delivery stream and the Amazon ES domain, make sure the security group inbound rule allows HTTPS traffic. For more information about security group rules, see Security group rules in the Amazon VPC documentation.
sourceimpl VpcConfiguration
impl VpcConfiguration
sourcepub fn builder() -> Builder
pub fn builder() -> Builder
Creates a new builder-style object to manufacture VpcConfiguration
Trait Implementations
sourceimpl Clone for VpcConfiguration
impl Clone for VpcConfiguration
sourcefn clone(&self) -> VpcConfiguration
fn clone(&self) -> VpcConfiguration
Returns a copy of the value. Read more
1.0.0 · sourcefn clone_from(&mut self, source: &Self)
fn clone_from(&mut self, source: &Self)
Performs copy-assignment from source
. Read more
sourceimpl Debug for VpcConfiguration
impl Debug for VpcConfiguration
sourceimpl PartialEq<VpcConfiguration> for VpcConfiguration
impl PartialEq<VpcConfiguration> for VpcConfiguration
sourcefn eq(&self, other: &VpcConfiguration) -> bool
fn eq(&self, other: &VpcConfiguration) -> bool
This method tests for self
and other
values to be equal, and is used
by ==
. Read more
sourcefn ne(&self, other: &VpcConfiguration) -> bool
fn ne(&self, other: &VpcConfiguration) -> bool
This method tests for !=
.
impl StructuralPartialEq for VpcConfiguration
Auto Trait Implementations
impl RefUnwindSafe for VpcConfiguration
impl Send for VpcConfiguration
impl Sync for VpcConfiguration
impl Unpin for VpcConfiguration
impl UnwindSafe for VpcConfiguration
Blanket Implementations
sourceimpl<T> BorrowMut<T> for T where
T: ?Sized,
impl<T> BorrowMut<T> for T where
T: ?Sized,
const: unstable · sourcefn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Mutably borrows from an owned value. Read more
sourceimpl<T> Instrument for T
impl<T> Instrument for T
sourcefn instrument(self, span: Span) -> Instrumented<Self>
fn instrument(self, span: Span) -> Instrumented<Self>
sourcefn in_current_span(self) -> Instrumented<Self>
fn in_current_span(self) -> Instrumented<Self>
sourceimpl<T> ToOwned for T where
T: Clone,
impl<T> ToOwned for T where
T: Clone,
type Owned = T
type Owned = T
The resulting type after obtaining ownership.
sourcefn clone_into(&self, target: &mut T)
fn clone_into(&self, target: &mut T)
toowned_clone_into
)Uses borrowed data to replace owned data, usually by cloning. Read more
sourceimpl<T> WithSubscriber for T
impl<T> WithSubscriber for T
sourcefn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self> where
S: Into<Dispatch>,
fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self> where
S: Into<Dispatch>,
Attaches the provided Subscriber
to this type, returning a
WithDispatch
wrapper. Read more
sourcefn with_current_subscriber(self) -> WithDispatch<Self>
fn with_current_subscriber(self) -> WithDispatch<Self>
Attaches the current default Subscriber
to this type, returning a
WithDispatch
wrapper. Read more