// Code generated by software.amazon.smithy.rust.codegen.smithy-rs. DO NOT EDIT.
pub use crate::operation::authorize_security_group_egress::_authorize_security_group_egress_output::AuthorizeSecurityGroupEgressOutputBuilder;

pub use crate::operation::authorize_security_group_egress::_authorize_security_group_egress_input::AuthorizeSecurityGroupEgressInputBuilder;

impl crate::operation::authorize_security_group_egress::builders::AuthorizeSecurityGroupEgressInputBuilder {
    /// Sends a request with this input using the given client.
    pub async fn send_with(
        self,
        client: &crate::Client,
    ) -> ::std::result::Result<
        crate::operation::authorize_security_group_egress::AuthorizeSecurityGroupEgressOutput,
        ::aws_smithy_runtime_api::client::result::SdkError<
            crate::operation::authorize_security_group_egress::AuthorizeSecurityGroupEgressError,
            ::aws_smithy_runtime_api::client::orchestrator::HttpResponse,
        >,
    > {
        let mut fluent_builder = client.authorize_security_group_egress();
        fluent_builder.inner = self;
        fluent_builder.send().await
    }
}
/// Fluent builder constructing a request to `AuthorizeSecurityGroupEgress`.
///
/// <p>Adds the specified outbound (egress) rules to a security group.</p>
/// <p>An outbound rule permits instances to send traffic to the specified IPv4 or IPv6 address ranges, the IP address ranges specified by a prefix list, or the instances that are associated with a source security group. For more information, see <a href="https://docs.aws.amazon.com/vpc/latest/userguide/security-group-rules.html">Security group rules</a>.</p>
/// <p>You must specify exactly one of the following destinations: an IPv4 or IPv6 address range, a prefix list, or a security group. You must specify a protocol for each rule (for example, TCP). If the protocol is TCP or UDP, you must also specify a port or port range. If the protocol is ICMP or ICMPv6, you must also specify the ICMP type and code.</p>
/// <p>Rule changes are propagated to instances associated with the security group as quickly as possible. However, a small delay might occur.</p>
/// <p>For examples of rules that you can add to security groups for specific access scenarios, see <a href="https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/security-group-rules-reference.html">Security group rules for different use cases</a> in the <i>Amazon EC2 User Guide</i>.</p>
/// <p>For information about security group quotas, see <a href="https://docs.aws.amazon.com/vpc/latest/userguide/amazon-vpc-limits.html">Amazon VPC quotas</a> in the <i>Amazon VPC User Guide</i>.</p>
#[derive(::std::clone::Clone, ::std::fmt::Debug)]
pub struct AuthorizeSecurityGroupEgressFluentBuilder {
    handle: ::std::sync::Arc<crate::client::Handle>,
    inner: crate::operation::authorize_security_group_egress::builders::AuthorizeSecurityGroupEgressInputBuilder,
    config_override: ::std::option::Option<crate::config::Builder>,
}
impl
    crate::client::customize::internal::CustomizableSend<
        crate::operation::authorize_security_group_egress::AuthorizeSecurityGroupEgressOutput,
        crate::operation::authorize_security_group_egress::AuthorizeSecurityGroupEgressError,
    > for AuthorizeSecurityGroupEgressFluentBuilder
{
    fn send(
        self,
        config_override: crate::config::Builder,
    ) -> crate::client::customize::internal::BoxFuture<
        crate::client::customize::internal::SendResult<
            crate::operation::authorize_security_group_egress::AuthorizeSecurityGroupEgressOutput,
            crate::operation::authorize_security_group_egress::AuthorizeSecurityGroupEgressError,
        >,
    > {
        ::std::boxed::Box::pin(async move { self.config_override(config_override).send().await })
    }
}
impl AuthorizeSecurityGroupEgressFluentBuilder {
    /// Creates a new `AuthorizeSecurityGroupEgressFluentBuilder`.
    pub(crate) fn new(handle: ::std::sync::Arc<crate::client::Handle>) -> Self {
        Self {
            handle,
            inner: ::std::default::Default::default(),
            config_override: ::std::option::Option::None,
        }
    }
    /// Access the AuthorizeSecurityGroupEgress as a reference.
    pub fn as_input(&self) -> &crate::operation::authorize_security_group_egress::builders::AuthorizeSecurityGroupEgressInputBuilder {
        &self.inner
    }
    /// Sends the request and returns the response.
    ///
    /// If an error occurs, an `SdkError` will be returned with additional details that
    /// can be matched against.
    ///
    /// By default, any retryable failures will be retried twice. Retry behavior
    /// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
    /// set when configuring the client.
    pub async fn send(
        self,
    ) -> ::std::result::Result<
        crate::operation::authorize_security_group_egress::AuthorizeSecurityGroupEgressOutput,
        ::aws_smithy_runtime_api::client::result::SdkError<
            crate::operation::authorize_security_group_egress::AuthorizeSecurityGroupEgressError,
            ::aws_smithy_runtime_api::client::orchestrator::HttpResponse,
        >,
    > {
        let input = self
            .inner
            .build()
            .map_err(::aws_smithy_runtime_api::client::result::SdkError::construction_failure)?;
        let runtime_plugins = crate::operation::authorize_security_group_egress::AuthorizeSecurityGroupEgress::operation_runtime_plugins(
            self.handle.runtime_plugins.clone(),
            &self.handle.conf,
            self.config_override,
        );
        crate::operation::authorize_security_group_egress::AuthorizeSecurityGroupEgress::orchestrate(&runtime_plugins, input).await
    }

    /// Consumes this builder, creating a customizable operation that can be modified before being sent.
    pub fn customize(
        self,
    ) -> crate::client::customize::CustomizableOperation<
        crate::operation::authorize_security_group_egress::AuthorizeSecurityGroupEgressOutput,
        crate::operation::authorize_security_group_egress::AuthorizeSecurityGroupEgressError,
        Self,
    > {
        crate::client::customize::CustomizableOperation::new(self)
    }
    pub(crate) fn config_override(mut self, config_override: impl ::std::convert::Into<crate::config::Builder>) -> Self {
        self.set_config_override(::std::option::Option::Some(config_override.into()));
        self
    }

    pub(crate) fn set_config_override(&mut self, config_override: ::std::option::Option<crate::config::Builder>) -> &mut Self {
        self.config_override = config_override;
        self
    }
    /// <p>Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is <code>DryRunOperation</code>. Otherwise, it is <code>UnauthorizedOperation</code>.</p>
    pub fn dry_run(mut self, input: bool) -> Self {
        self.inner = self.inner.dry_run(input);
        self
    }
    /// <p>Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is <code>DryRunOperation</code>. Otherwise, it is <code>UnauthorizedOperation</code>.</p>
    pub fn set_dry_run(mut self, input: ::std::option::Option<bool>) -> Self {
        self.inner = self.inner.set_dry_run(input);
        self
    }
    /// <p>Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is <code>DryRunOperation</code>. Otherwise, it is <code>UnauthorizedOperation</code>.</p>
    pub fn get_dry_run(&self) -> &::std::option::Option<bool> {
        self.inner.get_dry_run()
    }
    /// <p>The ID of the security group.</p>
    pub fn group_id(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
        self.inner = self.inner.group_id(input.into());
        self
    }
    /// <p>The ID of the security group.</p>
    pub fn set_group_id(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
        self.inner = self.inner.set_group_id(input);
        self
    }
    /// <p>The ID of the security group.</p>
    pub fn get_group_id(&self) -> &::std::option::Option<::std::string::String> {
        self.inner.get_group_id()
    }
    ///
    /// Appends an item to `IpPermissions`.
    ///
    /// To override the contents of this collection use [`set_ip_permissions`](Self::set_ip_permissions).
    ///
    /// <p>The permissions for the security group rules.</p>
    pub fn ip_permissions(mut self, input: crate::types::IpPermission) -> Self {
        self.inner = self.inner.ip_permissions(input);
        self
    }
    /// <p>The permissions for the security group rules.</p>
    pub fn set_ip_permissions(mut self, input: ::std::option::Option<::std::vec::Vec<crate::types::IpPermission>>) -> Self {
        self.inner = self.inner.set_ip_permissions(input);
        self
    }
    /// <p>The permissions for the security group rules.</p>
    pub fn get_ip_permissions(&self) -> &::std::option::Option<::std::vec::Vec<crate::types::IpPermission>> {
        self.inner.get_ip_permissions()
    }
    ///
    /// Appends an item to `TagSpecifications`.
    ///
    /// To override the contents of this collection use [`set_tag_specifications`](Self::set_tag_specifications).
    ///
    /// <p>The tags applied to the security group rule.</p>
    pub fn tag_specifications(mut self, input: crate::types::TagSpecification) -> Self {
        self.inner = self.inner.tag_specifications(input);
        self
    }
    /// <p>The tags applied to the security group rule.</p>
    pub fn set_tag_specifications(mut self, input: ::std::option::Option<::std::vec::Vec<crate::types::TagSpecification>>) -> Self {
        self.inner = self.inner.set_tag_specifications(input);
        self
    }
    /// <p>The tags applied to the security group rule.</p>
    pub fn get_tag_specifications(&self) -> &::std::option::Option<::std::vec::Vec<crate::types::TagSpecification>> {
        self.inner.get_tag_specifications()
    }
    /// <p>Not supported. Use IP permissions instead.</p>
    pub fn cidr_ip(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
        self.inner = self.inner.cidr_ip(input.into());
        self
    }
    /// <p>Not supported. Use IP permissions instead.</p>
    pub fn set_cidr_ip(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
        self.inner = self.inner.set_cidr_ip(input);
        self
    }
    /// <p>Not supported. Use IP permissions instead.</p>
    pub fn get_cidr_ip(&self) -> &::std::option::Option<::std::string::String> {
        self.inner.get_cidr_ip()
    }
    /// <p>Not supported. Use IP permissions instead.</p>
    pub fn from_port(mut self, input: i32) -> Self {
        self.inner = self.inner.from_port(input);
        self
    }
    /// <p>Not supported. Use IP permissions instead.</p>
    pub fn set_from_port(mut self, input: ::std::option::Option<i32>) -> Self {
        self.inner = self.inner.set_from_port(input);
        self
    }
    /// <p>Not supported. Use IP permissions instead.</p>
    pub fn get_from_port(&self) -> &::std::option::Option<i32> {
        self.inner.get_from_port()
    }
    /// <p>Not supported. Use IP permissions instead.</p>
    pub fn ip_protocol(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
        self.inner = self.inner.ip_protocol(input.into());
        self
    }
    /// <p>Not supported. Use IP permissions instead.</p>
    pub fn set_ip_protocol(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
        self.inner = self.inner.set_ip_protocol(input);
        self
    }
    /// <p>Not supported. Use IP permissions instead.</p>
    pub fn get_ip_protocol(&self) -> &::std::option::Option<::std::string::String> {
        self.inner.get_ip_protocol()
    }
    /// <p>Not supported. Use IP permissions instead.</p>
    pub fn to_port(mut self, input: i32) -> Self {
        self.inner = self.inner.to_port(input);
        self
    }
    /// <p>Not supported. Use IP permissions instead.</p>
    pub fn set_to_port(mut self, input: ::std::option::Option<i32>) -> Self {
        self.inner = self.inner.set_to_port(input);
        self
    }
    /// <p>Not supported. Use IP permissions instead.</p>
    pub fn get_to_port(&self) -> &::std::option::Option<i32> {
        self.inner.get_to_port()
    }
    /// <p>Not supported. Use IP permissions instead.</p>
    pub fn source_security_group_name(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
        self.inner = self.inner.source_security_group_name(input.into());
        self
    }
    /// <p>Not supported. Use IP permissions instead.</p>
    pub fn set_source_security_group_name(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
        self.inner = self.inner.set_source_security_group_name(input);
        self
    }
    /// <p>Not supported. Use IP permissions instead.</p>
    pub fn get_source_security_group_name(&self) -> &::std::option::Option<::std::string::String> {
        self.inner.get_source_security_group_name()
    }
    /// <p>Not supported. Use IP permissions instead.</p>
    pub fn source_security_group_owner_id(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
        self.inner = self.inner.source_security_group_owner_id(input.into());
        self
    }
    /// <p>Not supported. Use IP permissions instead.</p>
    pub fn set_source_security_group_owner_id(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
        self.inner = self.inner.set_source_security_group_owner_id(input);
        self
    }
    /// <p>Not supported. Use IP permissions instead.</p>
    pub fn get_source_security_group_owner_id(&self) -> &::std::option::Option<::std::string::String> {
        self.inner.get_source_security_group_owner_id()
    }
}