aws_sdk_ec2/operation/describe_network_insights_paths/builders.rs
1// Code generated by software.amazon.smithy.rust.codegen.smithy-rs. DO NOT EDIT.
2pub use crate::operation::describe_network_insights_paths::_describe_network_insights_paths_output::DescribeNetworkInsightsPathsOutputBuilder;
3
4pub use crate::operation::describe_network_insights_paths::_describe_network_insights_paths_input::DescribeNetworkInsightsPathsInputBuilder;
5
6impl crate::operation::describe_network_insights_paths::builders::DescribeNetworkInsightsPathsInputBuilder {
7 /// Sends a request with this input using the given client.
8 pub async fn send_with(
9 self,
10 client: &crate::Client,
11 ) -> ::std::result::Result<
12 crate::operation::describe_network_insights_paths::DescribeNetworkInsightsPathsOutput,
13 ::aws_smithy_runtime_api::client::result::SdkError<
14 crate::operation::describe_network_insights_paths::DescribeNetworkInsightsPathsError,
15 ::aws_smithy_runtime_api::client::orchestrator::HttpResponse,
16 >,
17 > {
18 let mut fluent_builder = client.describe_network_insights_paths();
19 fluent_builder.inner = self;
20 fluent_builder.send().await
21 }
22}
23/// Fluent builder constructing a request to `DescribeNetworkInsightsPaths`.
24///
25/// <p>Describes one or more of your paths.</p>
26#[derive(::std::clone::Clone, ::std::fmt::Debug)]
27pub struct DescribeNetworkInsightsPathsFluentBuilder {
28 handle: ::std::sync::Arc<crate::client::Handle>,
29 inner: crate::operation::describe_network_insights_paths::builders::DescribeNetworkInsightsPathsInputBuilder,
30 config_override: ::std::option::Option<crate::config::Builder>,
31}
32impl
33 crate::client::customize::internal::CustomizableSend<
34 crate::operation::describe_network_insights_paths::DescribeNetworkInsightsPathsOutput,
35 crate::operation::describe_network_insights_paths::DescribeNetworkInsightsPathsError,
36 > for DescribeNetworkInsightsPathsFluentBuilder
37{
38 fn send(
39 self,
40 config_override: crate::config::Builder,
41 ) -> crate::client::customize::internal::BoxFuture<
42 crate::client::customize::internal::SendResult<
43 crate::operation::describe_network_insights_paths::DescribeNetworkInsightsPathsOutput,
44 crate::operation::describe_network_insights_paths::DescribeNetworkInsightsPathsError,
45 >,
46 > {
47 ::std::boxed::Box::pin(async move { self.config_override(config_override).send().await })
48 }
49}
50impl DescribeNetworkInsightsPathsFluentBuilder {
51 /// Creates a new `DescribeNetworkInsightsPathsFluentBuilder`.
52 pub(crate) fn new(handle: ::std::sync::Arc<crate::client::Handle>) -> Self {
53 Self {
54 handle,
55 inner: ::std::default::Default::default(),
56 config_override: ::std::option::Option::None,
57 }
58 }
59 /// Access the DescribeNetworkInsightsPaths as a reference.
60 pub fn as_input(&self) -> &crate::operation::describe_network_insights_paths::builders::DescribeNetworkInsightsPathsInputBuilder {
61 &self.inner
62 }
63 /// Sends the request and returns the response.
64 ///
65 /// If an error occurs, an `SdkError` will be returned with additional details that
66 /// can be matched against.
67 ///
68 /// By default, any retryable failures will be retried twice. Retry behavior
69 /// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
70 /// set when configuring the client.
71 pub async fn send(
72 self,
73 ) -> ::std::result::Result<
74 crate::operation::describe_network_insights_paths::DescribeNetworkInsightsPathsOutput,
75 ::aws_smithy_runtime_api::client::result::SdkError<
76 crate::operation::describe_network_insights_paths::DescribeNetworkInsightsPathsError,
77 ::aws_smithy_runtime_api::client::orchestrator::HttpResponse,
78 >,
79 > {
80 let input = self
81 .inner
82 .build()
83 .map_err(::aws_smithy_runtime_api::client::result::SdkError::construction_failure)?;
84 let runtime_plugins = crate::operation::describe_network_insights_paths::DescribeNetworkInsightsPaths::operation_runtime_plugins(
85 self.handle.runtime_plugins.clone(),
86 &self.handle.conf,
87 self.config_override,
88 );
89 crate::operation::describe_network_insights_paths::DescribeNetworkInsightsPaths::orchestrate(&runtime_plugins, input).await
90 }
91
92 /// Consumes this builder, creating a customizable operation that can be modified before being sent.
93 pub fn customize(
94 self,
95 ) -> crate::client::customize::CustomizableOperation<
96 crate::operation::describe_network_insights_paths::DescribeNetworkInsightsPathsOutput,
97 crate::operation::describe_network_insights_paths::DescribeNetworkInsightsPathsError,
98 Self,
99 > {
100 crate::client::customize::CustomizableOperation::new(self)
101 }
102 pub(crate) fn config_override(mut self, config_override: impl ::std::convert::Into<crate::config::Builder>) -> Self {
103 self.set_config_override(::std::option::Option::Some(config_override.into()));
104 self
105 }
106
107 pub(crate) fn set_config_override(&mut self, config_override: ::std::option::Option<crate::config::Builder>) -> &mut Self {
108 self.config_override = config_override;
109 self
110 }
111 /// Create a paginator for this request
112 ///
113 /// Paginators are used by calling [`send().await`](crate::operation::describe_network_insights_paths::paginator::DescribeNetworkInsightsPathsPaginator::send) which returns a [`PaginationStream`](aws_smithy_async::future::pagination_stream::PaginationStream).
114 pub fn into_paginator(self) -> crate::operation::describe_network_insights_paths::paginator::DescribeNetworkInsightsPathsPaginator {
115 crate::operation::describe_network_insights_paths::paginator::DescribeNetworkInsightsPathsPaginator::new(self.handle, self.inner)
116 }
117 ///
118 /// Appends an item to `NetworkInsightsPathIds`.
119 ///
120 /// To override the contents of this collection use [`set_network_insights_path_ids`](Self::set_network_insights_path_ids).
121 ///
122 /// <p>The IDs of the paths.</p>
123 pub fn network_insights_path_ids(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
124 self.inner = self.inner.network_insights_path_ids(input.into());
125 self
126 }
127 /// <p>The IDs of the paths.</p>
128 pub fn set_network_insights_path_ids(mut self, input: ::std::option::Option<::std::vec::Vec<::std::string::String>>) -> Self {
129 self.inner = self.inner.set_network_insights_path_ids(input);
130 self
131 }
132 /// <p>The IDs of the paths.</p>
133 pub fn get_network_insights_path_ids(&self) -> &::std::option::Option<::std::vec::Vec<::std::string::String>> {
134 self.inner.get_network_insights_path_ids()
135 }
136 ///
137 /// Appends an item to `Filters`.
138 ///
139 /// To override the contents of this collection use [`set_filters`](Self::set_filters).
140 ///
141 /// <p>The filters. The following are the possible values:</p>
142 /// <ul>
143 /// <li>
144 /// <p>destination - The ID of the resource.</p></li>
145 /// <li>
146 /// <p>filter-at-source.source-address - The source IPv4 address at the source.</p></li>
147 /// <li>
148 /// <p>filter-at-source.source-port-range - The source port range at the source.</p></li>
149 /// <li>
150 /// <p>filter-at-source.destination-address - The destination IPv4 address at the source.</p></li>
151 /// <li>
152 /// <p>filter-at-source.destination-port-range - The destination port range at the source.</p></li>
153 /// <li>
154 /// <p>filter-at-destination.source-address - The source IPv4 address at the destination.</p></li>
155 /// <li>
156 /// <p>filter-at-destination.source-port-range - The source port range at the destination.</p></li>
157 /// <li>
158 /// <p>filter-at-destination.destination-address - The destination IPv4 address at the destination.</p></li>
159 /// <li>
160 /// <p>filter-at-destination.destination-port-range - The destination port range at the destination.</p></li>
161 /// <li>
162 /// <p>protocol - The protocol.</p></li>
163 /// <li>
164 /// <p>source - The ID of the resource.</p></li>
165 /// </ul>
166 pub fn filters(mut self, input: crate::types::Filter) -> Self {
167 self.inner = self.inner.filters(input);
168 self
169 }
170 /// <p>The filters. The following are the possible values:</p>
171 /// <ul>
172 /// <li>
173 /// <p>destination - The ID of the resource.</p></li>
174 /// <li>
175 /// <p>filter-at-source.source-address - The source IPv4 address at the source.</p></li>
176 /// <li>
177 /// <p>filter-at-source.source-port-range - The source port range at the source.</p></li>
178 /// <li>
179 /// <p>filter-at-source.destination-address - The destination IPv4 address at the source.</p></li>
180 /// <li>
181 /// <p>filter-at-source.destination-port-range - The destination port range at the source.</p></li>
182 /// <li>
183 /// <p>filter-at-destination.source-address - The source IPv4 address at the destination.</p></li>
184 /// <li>
185 /// <p>filter-at-destination.source-port-range - The source port range at the destination.</p></li>
186 /// <li>
187 /// <p>filter-at-destination.destination-address - The destination IPv4 address at the destination.</p></li>
188 /// <li>
189 /// <p>filter-at-destination.destination-port-range - The destination port range at the destination.</p></li>
190 /// <li>
191 /// <p>protocol - The protocol.</p></li>
192 /// <li>
193 /// <p>source - The ID of the resource.</p></li>
194 /// </ul>
195 pub fn set_filters(mut self, input: ::std::option::Option<::std::vec::Vec<crate::types::Filter>>) -> Self {
196 self.inner = self.inner.set_filters(input);
197 self
198 }
199 /// <p>The filters. The following are the possible values:</p>
200 /// <ul>
201 /// <li>
202 /// <p>destination - The ID of the resource.</p></li>
203 /// <li>
204 /// <p>filter-at-source.source-address - The source IPv4 address at the source.</p></li>
205 /// <li>
206 /// <p>filter-at-source.source-port-range - The source port range at the source.</p></li>
207 /// <li>
208 /// <p>filter-at-source.destination-address - The destination IPv4 address at the source.</p></li>
209 /// <li>
210 /// <p>filter-at-source.destination-port-range - The destination port range at the source.</p></li>
211 /// <li>
212 /// <p>filter-at-destination.source-address - The source IPv4 address at the destination.</p></li>
213 /// <li>
214 /// <p>filter-at-destination.source-port-range - The source port range at the destination.</p></li>
215 /// <li>
216 /// <p>filter-at-destination.destination-address - The destination IPv4 address at the destination.</p></li>
217 /// <li>
218 /// <p>filter-at-destination.destination-port-range - The destination port range at the destination.</p></li>
219 /// <li>
220 /// <p>protocol - The protocol.</p></li>
221 /// <li>
222 /// <p>source - The ID of the resource.</p></li>
223 /// </ul>
224 pub fn get_filters(&self) -> &::std::option::Option<::std::vec::Vec<crate::types::Filter>> {
225 self.inner.get_filters()
226 }
227 /// <p>The maximum number of results to return with a single call. To retrieve the remaining results, make another call with the returned <code>nextToken</code> value.</p>
228 pub fn max_results(mut self, input: i32) -> Self {
229 self.inner = self.inner.max_results(input);
230 self
231 }
232 /// <p>The maximum number of results to return with a single call. To retrieve the remaining results, make another call with the returned <code>nextToken</code> value.</p>
233 pub fn set_max_results(mut self, input: ::std::option::Option<i32>) -> Self {
234 self.inner = self.inner.set_max_results(input);
235 self
236 }
237 /// <p>The maximum number of results to return with a single call. To retrieve the remaining results, make another call with the returned <code>nextToken</code> value.</p>
238 pub fn get_max_results(&self) -> &::std::option::Option<i32> {
239 self.inner.get_max_results()
240 }
241 /// <p>Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is <code>DryRunOperation</code>. Otherwise, it is <code>UnauthorizedOperation</code>.</p>
242 pub fn dry_run(mut self, input: bool) -> Self {
243 self.inner = self.inner.dry_run(input);
244 self
245 }
246 /// <p>Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is <code>DryRunOperation</code>. Otherwise, it is <code>UnauthorizedOperation</code>.</p>
247 pub fn set_dry_run(mut self, input: ::std::option::Option<bool>) -> Self {
248 self.inner = self.inner.set_dry_run(input);
249 self
250 }
251 /// <p>Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is <code>DryRunOperation</code>. Otherwise, it is <code>UnauthorizedOperation</code>.</p>
252 pub fn get_dry_run(&self) -> &::std::option::Option<bool> {
253 self.inner.get_dry_run()
254 }
255 /// <p>The token for the next page of results.</p>
256 pub fn next_token(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
257 self.inner = self.inner.next_token(input.into());
258 self
259 }
260 /// <p>The token for the next page of results.</p>
261 pub fn set_next_token(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
262 self.inner = self.inner.set_next_token(input);
263 self
264 }
265 /// <p>The token for the next page of results.</p>
266 pub fn get_next_token(&self) -> &::std::option::Option<::std::string::String> {
267 self.inner.get_next_token()
268 }
269}