// Code generated by software.amazon.smithy.rust.codegen.smithy-rs. DO NOT EDIT.
pub use crate::operation::terminate_instances::_terminate_instances_output::TerminateInstancesOutputBuilder;

pub use crate::operation::terminate_instances::_terminate_instances_input::TerminateInstancesInputBuilder;

impl TerminateInstancesInputBuilder {
    /// Sends a request with this input using the given client.
    pub async fn send_with(
        self,
        client: &crate::Client,
    ) -> ::std::result::Result<
        crate::operation::terminate_instances::TerminateInstancesOutput,
        ::aws_smithy_runtime_api::client::result::SdkError<
            crate::operation::terminate_instances::TerminateInstancesError,
            ::aws_smithy_runtime_api::client::orchestrator::HttpResponse,
        >,
    > {
        let mut fluent_builder = client.terminate_instances();
        fluent_builder.inner = self;
        fluent_builder.send().await
    }
}
/// Fluent builder constructing a request to `TerminateInstances`.
///
/// <p>Shuts down the specified instances. This operation is idempotent; if you terminate an instance more than once, each call succeeds. </p>
/// <p>If you specify multiple instances and the request fails (for example, because of a single incorrect instance ID), none of the instances are terminated.</p>
/// <p>If you terminate multiple instances across multiple Availability Zones, and one or more of the specified instances are enabled for termination protection, the request fails with the following results:</p>
/// <ul>
/// <li> <p>The specified instances that are in the same Availability Zone as the protected instance are not terminated.</p> </li>
/// <li> <p>The specified instances that are in different Availability Zones, where no other specified instances are protected, are successfully terminated.</p> </li>
/// </ul>
/// <p>For example, say you have the following instances:</p>
/// <ul>
/// <li> <p>Instance A: <code>us-east-1a</code>; Not protected</p> </li>
/// <li> <p>Instance B: <code>us-east-1a</code>; Not protected</p> </li>
/// <li> <p>Instance C: <code>us-east-1b</code>; Protected</p> </li>
/// <li> <p>Instance D: <code>us-east-1b</code>; not protected</p> </li>
/// </ul>
/// <p>If you attempt to terminate all of these instances in the same request, the request reports failure with the following results:</p>
/// <ul>
/// <li> <p>Instance A and Instance B are successfully terminated because none of the specified instances in <code>us-east-1a</code> are enabled for termination protection.</p> </li>
/// <li> <p>Instance C and Instance D fail to terminate because at least one of the specified instances in <code>us-east-1b</code> (Instance C) is enabled for termination protection.</p> </li>
/// </ul>
/// <p>Terminated instances remain visible after termination (for approximately one hour).</p>
/// <p>By default, Amazon EC2 deletes all EBS volumes that were attached when the instance launched. Volumes attached after instance launch continue running.</p>
/// <p>You can stop, start, and terminate EBS-backed instances. You can only terminate instance store-backed instances. What happens to an instance differs if you stop it or terminate it. For example, when you stop an instance, the root device and any other devices attached to the instance persist. When you terminate an instance, any attached EBS volumes with the <code>DeleteOnTermination</code> block device mapping parameter set to <code>true</code> are automatically deleted. For more information about the differences between stopping and terminating instances, see <a href="https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ec2-instance-lifecycle.html">Instance lifecycle</a> in the <i>Amazon EC2 User Guide</i>.</p>
/// <p>For more information about troubleshooting, see <a href="https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/TroubleshootingInstancesShuttingDown.html">Troubleshooting terminating your instance</a> in the <i>Amazon EC2 User Guide</i>.</p>
#[derive(::std::clone::Clone, ::std::fmt::Debug)]
pub struct TerminateInstancesFluentBuilder {
    handle: ::std::sync::Arc<crate::client::Handle>,
    inner: crate::operation::terminate_instances::builders::TerminateInstancesInputBuilder,
    config_override: ::std::option::Option<crate::config::Builder>,
}
impl
    crate::client::customize::internal::CustomizableSend<
        crate::operation::terminate_instances::TerminateInstancesOutput,
        crate::operation::terminate_instances::TerminateInstancesError,
    > for TerminateInstancesFluentBuilder
{
    fn send(
        self,
        config_override: crate::config::Builder,
    ) -> crate::client::customize::internal::BoxFuture<
        crate::client::customize::internal::SendResult<
            crate::operation::terminate_instances::TerminateInstancesOutput,
            crate::operation::terminate_instances::TerminateInstancesError,
        >,
    > {
        ::std::boxed::Box::pin(async move { self.config_override(config_override).send().await })
    }
}
impl TerminateInstancesFluentBuilder {
    /// Creates a new `TerminateInstances`.
    pub(crate) fn new(handle: ::std::sync::Arc<crate::client::Handle>) -> Self {
        Self {
            handle,
            inner: ::std::default::Default::default(),
            config_override: ::std::option::Option::None,
        }
    }
    /// Access the TerminateInstances as a reference.
    pub fn as_input(&self) -> &crate::operation::terminate_instances::builders::TerminateInstancesInputBuilder {
        &self.inner
    }
    /// Sends the request and returns the response.
    ///
    /// If an error occurs, an `SdkError` will be returned with additional details that
    /// can be matched against.
    ///
    /// By default, any retryable failures will be retried twice. Retry behavior
    /// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
    /// set when configuring the client.
    pub async fn send(
        self,
    ) -> ::std::result::Result<
        crate::operation::terminate_instances::TerminateInstancesOutput,
        ::aws_smithy_runtime_api::client::result::SdkError<
            crate::operation::terminate_instances::TerminateInstancesError,
            ::aws_smithy_runtime_api::client::orchestrator::HttpResponse,
        >,
    > {
        let input = self
            .inner
            .build()
            .map_err(::aws_smithy_runtime_api::client::result::SdkError::construction_failure)?;
        let runtime_plugins = crate::operation::terminate_instances::TerminateInstances::operation_runtime_plugins(
            self.handle.runtime_plugins.clone(),
            &self.handle.conf,
            self.config_override,
        );
        crate::operation::terminate_instances::TerminateInstances::orchestrate(&runtime_plugins, input).await
    }

    /// Consumes this builder, creating a customizable operation that can be modified before being sent.
    pub fn customize(
        self,
    ) -> crate::client::customize::CustomizableOperation<
        crate::operation::terminate_instances::TerminateInstancesOutput,
        crate::operation::terminate_instances::TerminateInstancesError,
        Self,
    > {
        crate::client::customize::CustomizableOperation::new(self)
    }
    pub(crate) fn config_override(mut self, config_override: impl Into<crate::config::Builder>) -> Self {
        self.set_config_override(Some(config_override.into()));
        self
    }

    pub(crate) fn set_config_override(&mut self, config_override: Option<crate::config::Builder>) -> &mut Self {
        self.config_override = config_override;
        self
    }
    /// Appends an item to `InstanceIds`.
    ///
    /// To override the contents of this collection use [`set_instance_ids`](Self::set_instance_ids).
    ///
    /// <p>The IDs of the instances.</p>
    /// <p>Constraints: Up to 1000 instance IDs. We recommend breaking up this request into smaller batches.</p>
    pub fn instance_ids(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
        self.inner = self.inner.instance_ids(input.into());
        self
    }
    /// <p>The IDs of the instances.</p>
    /// <p>Constraints: Up to 1000 instance IDs. We recommend breaking up this request into smaller batches.</p>
    pub fn set_instance_ids(mut self, input: ::std::option::Option<::std::vec::Vec<::std::string::String>>) -> Self {
        self.inner = self.inner.set_instance_ids(input);
        self
    }
    /// <p>The IDs of the instances.</p>
    /// <p>Constraints: Up to 1000 instance IDs. We recommend breaking up this request into smaller batches.</p>
    pub fn get_instance_ids(&self) -> &::std::option::Option<::std::vec::Vec<::std::string::String>> {
        self.inner.get_instance_ids()
    }
    /// <p>Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is <code>DryRunOperation</code>. Otherwise, it is <code>UnauthorizedOperation</code>.</p>
    pub fn dry_run(mut self, input: bool) -> Self {
        self.inner = self.inner.dry_run(input);
        self
    }
    /// <p>Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is <code>DryRunOperation</code>. Otherwise, it is <code>UnauthorizedOperation</code>.</p>
    pub fn set_dry_run(mut self, input: ::std::option::Option<bool>) -> Self {
        self.inner = self.inner.set_dry_run(input);
        self
    }
    /// <p>Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is <code>DryRunOperation</code>. Otherwise, it is <code>UnauthorizedOperation</code>.</p>
    pub fn get_dry_run(&self) -> &::std::option::Option<bool> {
        self.inner.get_dry_run()
    }
}