aws_sdk_docdb/operation/modify_db_cluster_parameter_group/
builders.rs

1// Code generated by software.amazon.smithy.rust.codegen.smithy-rs. DO NOT EDIT.
2pub use crate::operation::modify_db_cluster_parameter_group::_modify_db_cluster_parameter_group_output::ModifyDbClusterParameterGroupOutputBuilder;
3
4pub use crate::operation::modify_db_cluster_parameter_group::_modify_db_cluster_parameter_group_input::ModifyDbClusterParameterGroupInputBuilder;
5
6impl crate::operation::modify_db_cluster_parameter_group::builders::ModifyDbClusterParameterGroupInputBuilder {
7    /// Sends a request with this input using the given client.
8    pub async fn send_with(
9        self,
10        client: &crate::Client,
11    ) -> ::std::result::Result<
12        crate::operation::modify_db_cluster_parameter_group::ModifyDbClusterParameterGroupOutput,
13        ::aws_smithy_runtime_api::client::result::SdkError<
14            crate::operation::modify_db_cluster_parameter_group::ModifyDBClusterParameterGroupError,
15            ::aws_smithy_runtime_api::client::orchestrator::HttpResponse,
16        >,
17    > {
18        let mut fluent_builder = client.modify_db_cluster_parameter_group();
19        fluent_builder.inner = self;
20        fluent_builder.send().await
21    }
22}
23/// Fluent builder constructing a request to `ModifyDBClusterParameterGroup`.
24///
25/// <p>Modifies the parameters of a cluster parameter group. To modify more than one parameter, submit a list of the following: <code>ParameterName</code>, <code>ParameterValue</code>, and <code>ApplyMethod</code>. A maximum of 20 parameters can be modified in a single request.</p><note>
26/// <p>Changes to dynamic parameters are applied immediately. Changes to static parameters require a reboot or maintenance window before the change can take effect.</p>
27/// </note> <important>
28/// <p>After you create a cluster parameter group, you should wait at least 5 minutes before creating your first cluster that uses that cluster parameter group as the default parameter group. This allows Amazon DocumentDB to fully complete the create action before the parameter group is used as the default for a new cluster. This step is especially important for parameters that are critical when creating the default database for a cluster, such as the character set for the default database defined by the <code>character_set_database</code> parameter.</p>
29/// </important>
30#[derive(::std::clone::Clone, ::std::fmt::Debug)]
31pub struct ModifyDBClusterParameterGroupFluentBuilder {
32    handle: ::std::sync::Arc<crate::client::Handle>,
33    inner: crate::operation::modify_db_cluster_parameter_group::builders::ModifyDbClusterParameterGroupInputBuilder,
34    config_override: ::std::option::Option<crate::config::Builder>,
35}
36impl
37    crate::client::customize::internal::CustomizableSend<
38        crate::operation::modify_db_cluster_parameter_group::ModifyDbClusterParameterGroupOutput,
39        crate::operation::modify_db_cluster_parameter_group::ModifyDBClusterParameterGroupError,
40    > for ModifyDBClusterParameterGroupFluentBuilder
41{
42    fn send(
43        self,
44        config_override: crate::config::Builder,
45    ) -> crate::client::customize::internal::BoxFuture<
46        crate::client::customize::internal::SendResult<
47            crate::operation::modify_db_cluster_parameter_group::ModifyDbClusterParameterGroupOutput,
48            crate::operation::modify_db_cluster_parameter_group::ModifyDBClusterParameterGroupError,
49        >,
50    > {
51        ::std::boxed::Box::pin(async move { self.config_override(config_override).send().await })
52    }
53}
54impl ModifyDBClusterParameterGroupFluentBuilder {
55    /// Creates a new `ModifyDBClusterParameterGroupFluentBuilder`.
56    pub(crate) fn new(handle: ::std::sync::Arc<crate::client::Handle>) -> Self {
57        Self {
58            handle,
59            inner: ::std::default::Default::default(),
60            config_override: ::std::option::Option::None,
61        }
62    }
63    /// Access the ModifyDBClusterParameterGroup as a reference.
64    pub fn as_input(&self) -> &crate::operation::modify_db_cluster_parameter_group::builders::ModifyDbClusterParameterGroupInputBuilder {
65        &self.inner
66    }
67    /// Sends the request and returns the response.
68    ///
69    /// If an error occurs, an `SdkError` will be returned with additional details that
70    /// can be matched against.
71    ///
72    /// By default, any retryable failures will be retried twice. Retry behavior
73    /// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
74    /// set when configuring the client.
75    pub async fn send(
76        self,
77    ) -> ::std::result::Result<
78        crate::operation::modify_db_cluster_parameter_group::ModifyDbClusterParameterGroupOutput,
79        ::aws_smithy_runtime_api::client::result::SdkError<
80            crate::operation::modify_db_cluster_parameter_group::ModifyDBClusterParameterGroupError,
81            ::aws_smithy_runtime_api::client::orchestrator::HttpResponse,
82        >,
83    > {
84        let input = self
85            .inner
86            .build()
87            .map_err(::aws_smithy_runtime_api::client::result::SdkError::construction_failure)?;
88        let runtime_plugins = crate::operation::modify_db_cluster_parameter_group::ModifyDBClusterParameterGroup::operation_runtime_plugins(
89            self.handle.runtime_plugins.clone(),
90            &self.handle.conf,
91            self.config_override,
92        );
93        crate::operation::modify_db_cluster_parameter_group::ModifyDBClusterParameterGroup::orchestrate(&runtime_plugins, input).await
94    }
95
96    /// Consumes this builder, creating a customizable operation that can be modified before being sent.
97    pub fn customize(
98        self,
99    ) -> crate::client::customize::CustomizableOperation<
100        crate::operation::modify_db_cluster_parameter_group::ModifyDbClusterParameterGroupOutput,
101        crate::operation::modify_db_cluster_parameter_group::ModifyDBClusterParameterGroupError,
102        Self,
103    > {
104        crate::client::customize::CustomizableOperation::new(self)
105    }
106    pub(crate) fn config_override(mut self, config_override: impl ::std::convert::Into<crate::config::Builder>) -> Self {
107        self.set_config_override(::std::option::Option::Some(config_override.into()));
108        self
109    }
110
111    pub(crate) fn set_config_override(&mut self, config_override: ::std::option::Option<crate::config::Builder>) -> &mut Self {
112        self.config_override = config_override;
113        self
114    }
115    /// <p>The name of the cluster parameter group to modify.</p>
116    pub fn db_cluster_parameter_group_name(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
117        self.inner = self.inner.db_cluster_parameter_group_name(input.into());
118        self
119    }
120    /// <p>The name of the cluster parameter group to modify.</p>
121    pub fn set_db_cluster_parameter_group_name(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
122        self.inner = self.inner.set_db_cluster_parameter_group_name(input);
123        self
124    }
125    /// <p>The name of the cluster parameter group to modify.</p>
126    pub fn get_db_cluster_parameter_group_name(&self) -> &::std::option::Option<::std::string::String> {
127        self.inner.get_db_cluster_parameter_group_name()
128    }
129    ///
130    /// Appends an item to `Parameters`.
131    ///
132    /// To override the contents of this collection use [`set_parameters`](Self::set_parameters).
133    ///
134    /// <p>A list of parameters in the cluster parameter group to modify.</p>
135    pub fn parameters(mut self, input: crate::types::Parameter) -> Self {
136        self.inner = self.inner.parameters(input);
137        self
138    }
139    /// <p>A list of parameters in the cluster parameter group to modify.</p>
140    pub fn set_parameters(mut self, input: ::std::option::Option<::std::vec::Vec<crate::types::Parameter>>) -> Self {
141        self.inner = self.inner.set_parameters(input);
142        self
143    }
144    /// <p>A list of parameters in the cluster parameter group to modify.</p>
145    pub fn get_parameters(&self) -> &::std::option::Option<::std::vec::Vec<crate::types::Parameter>> {
146        self.inner.get_parameters()
147    }
148}
aws_sdk_docdb/operation/modify_db_cluster_parameter_group/builders.rs

aws_sdk_docdb/operation/modify_db_cluster_parameter_group/
builders.rs
