// Code generated by software.amazon.smithy.rust.codegen.smithy-rs. DO NOT EDIT.
pub use crate::operation::modify_db_instance::_modify_db_instance_output::ModifyDbInstanceOutputBuilder;

pub use crate::operation::modify_db_instance::_modify_db_instance_input::ModifyDbInstanceInputBuilder;

/// Fluent builder constructing a request to `ModifyDBInstance`.
///
/// <p>Modifies settings for an instance. You can change one or more database configuration parameters by specifying these parameters and the new values in the request.</p>
#[derive(::std::clone::Clone, ::std::fmt::Debug)]
pub struct ModifyDBInstanceFluentBuilder {
    handle: ::std::sync::Arc<crate::client::Handle>,
    inner: crate::operation::modify_db_instance::builders::ModifyDbInstanceInputBuilder,
}
impl ModifyDBInstanceFluentBuilder {
    /// Creates a new `ModifyDBInstance`.
    pub(crate) fn new(handle: ::std::sync::Arc<crate::client::Handle>) -> Self {
        Self {
            handle,
            inner: ::std::default::Default::default(),
        }
    }
    // This function will go away in the near future. Do not rely on it.
    #[doc(hidden)]
    pub async fn customize_middleware(
        self,
    ) -> ::std::result::Result<
        crate::client::customize::CustomizableOperation<
            crate::operation::modify_db_instance::ModifyDBInstance,
            ::aws_http::retry::AwsResponseRetryClassifier,
        >,
        ::aws_smithy_http::result::SdkError<
            crate::operation::modify_db_instance::ModifyDBInstanceError,
        >,
    > {
        let handle = self.handle.clone();
        let operation = self
            .inner
            .build()
            .map_err(::aws_smithy_http::result::SdkError::construction_failure)?
            .make_operation(&handle.conf)
            .await
            .map_err(::aws_smithy_http::result::SdkError::construction_failure)?;
        ::std::result::Result::Ok(crate::client::customize::CustomizableOperation {
            handle,
            operation,
        })
    }

    // This function will go away in the near future. Do not rely on it.
    #[doc(hidden)]
    pub async fn send_middleware(
        self,
    ) -> ::std::result::Result<
        crate::operation::modify_db_instance::ModifyDbInstanceOutput,
        ::aws_smithy_http::result::SdkError<
            crate::operation::modify_db_instance::ModifyDBInstanceError,
        >,
    > {
        let op = self
            .inner
            .build()
            .map_err(::aws_smithy_http::result::SdkError::construction_failure)?
            .make_operation(&self.handle.conf)
            .await
            .map_err(::aws_smithy_http::result::SdkError::construction_failure)?;
        self.handle.client.call(op).await
    }
    /// Sends the request and returns the response.
    ///
    /// If an error occurs, an `SdkError` will be returned with additional details that
    /// can be matched against.
    ///
    /// By default, any retryable failures will be retried twice. Retry behavior
    /// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
    /// set when configuring the client.
    pub async fn send(
        self,
    ) -> ::std::result::Result<
        crate::operation::modify_db_instance::ModifyDbInstanceOutput,
        ::aws_smithy_http::result::SdkError<
            crate::operation::modify_db_instance::ModifyDBInstanceError,
        >,
    > {
        self.send_middleware().await
    }

    /// Consumes this builder, creating a customizable operation that can be modified before being
    /// sent. The operation's inner [http::Request] can be modified as well.
    pub async fn customize(
        self,
    ) -> ::std::result::Result<
        crate::client::customize::CustomizableOperation<
            crate::operation::modify_db_instance::ModifyDBInstance,
            ::aws_http::retry::AwsResponseRetryClassifier,
        >,
        ::aws_smithy_http::result::SdkError<
            crate::operation::modify_db_instance::ModifyDBInstanceError,
        >,
    > {
        self.customize_middleware().await
    }
    /// <p>The instance identifier. This value is stored as a lowercase string.</p>
    /// <p>Constraints:</p>
    /// <ul>
    /// <li> <p>Must match the identifier of an existing <code>DBInstance</code>.</p> </li>
    /// </ul>
    pub fn db_instance_identifier(
        mut self,
        input: impl ::std::convert::Into<::std::string::String>,
    ) -> Self {
        self.inner = self.inner.db_instance_identifier(input.into());
        self
    }
    /// <p>The instance identifier. This value is stored as a lowercase string.</p>
    /// <p>Constraints:</p>
    /// <ul>
    /// <li> <p>Must match the identifier of an existing <code>DBInstance</code>.</p> </li>
    /// </ul>
    pub fn set_db_instance_identifier(
        mut self,
        input: ::std::option::Option<::std::string::String>,
    ) -> Self {
        self.inner = self.inner.set_db_instance_identifier(input);
        self
    }
    /// <p>The new compute and memory capacity of the instance; for example, <code>db.r5.large</code>. Not all instance classes are available in all Amazon Web Services Regions. </p>
    /// <p>If you modify the instance class, an outage occurs during the change. The change is applied during the next maintenance window, unless <code>ApplyImmediately</code> is specified as <code>true</code> for this request. </p>
    /// <p>Default: Uses existing setting.</p>
    pub fn db_instance_class(
        mut self,
        input: impl ::std::convert::Into<::std::string::String>,
    ) -> Self {
        self.inner = self.inner.db_instance_class(input.into());
        self
    }
    /// <p>The new compute and memory capacity of the instance; for example, <code>db.r5.large</code>. Not all instance classes are available in all Amazon Web Services Regions. </p>
    /// <p>If you modify the instance class, an outage occurs during the change. The change is applied during the next maintenance window, unless <code>ApplyImmediately</code> is specified as <code>true</code> for this request. </p>
    /// <p>Default: Uses existing setting.</p>
    pub fn set_db_instance_class(
        mut self,
        input: ::std::option::Option<::std::string::String>,
    ) -> Self {
        self.inner = self.inner.set_db_instance_class(input);
        self
    }
    /// <p>Specifies whether the modifications in this request and any pending modifications are asynchronously applied as soon as possible, regardless of the <code>PreferredMaintenanceWindow</code> setting for the instance. </p>
    /// <p> If this parameter is set to <code>false</code>, changes to the instance are applied during the next maintenance window. Some parameter changes can cause an outage and are applied on the next reboot.</p>
    /// <p>Default: <code>false</code> </p>
    pub fn apply_immediately(mut self, input: bool) -> Self {
        self.inner = self.inner.apply_immediately(input);
        self
    }
    /// <p>Specifies whether the modifications in this request and any pending modifications are asynchronously applied as soon as possible, regardless of the <code>PreferredMaintenanceWindow</code> setting for the instance. </p>
    /// <p> If this parameter is set to <code>false</code>, changes to the instance are applied during the next maintenance window. Some parameter changes can cause an outage and are applied on the next reboot.</p>
    /// <p>Default: <code>false</code> </p>
    pub fn set_apply_immediately(mut self, input: ::std::option::Option<bool>) -> Self {
        self.inner = self.inner.set_apply_immediately(input);
        self
    }
    /// <p>The weekly time range (in UTC) during which system maintenance can occur, which might result in an outage. Changing this parameter doesn't result in an outage except in the following situation, and the change is asynchronously applied as soon as possible. If there are pending actions that cause a reboot, and the maintenance window is changed to include the current time, changing this parameter causes a reboot of the instance. If you are moving this window to the current time, there must be at least 30 minutes between the current time and end of the window to ensure that pending changes are applied.</p>
    /// <p>Default: Uses existing setting.</p>
    /// <p>Format: <code>ddd:hh24:mi-ddd:hh24:mi</code> </p>
    /// <p>Valid days: Mon, Tue, Wed, Thu, Fri, Sat, Sun</p>
    /// <p>Constraints: Must be at least 30 minutes.</p>
    pub fn preferred_maintenance_window(
        mut self,
        input: impl ::std::convert::Into<::std::string::String>,
    ) -> Self {
        self.inner = self.inner.preferred_maintenance_window(input.into());
        self
    }
    /// <p>The weekly time range (in UTC) during which system maintenance can occur, which might result in an outage. Changing this parameter doesn't result in an outage except in the following situation, and the change is asynchronously applied as soon as possible. If there are pending actions that cause a reboot, and the maintenance window is changed to include the current time, changing this parameter causes a reboot of the instance. If you are moving this window to the current time, there must be at least 30 minutes between the current time and end of the window to ensure that pending changes are applied.</p>
    /// <p>Default: Uses existing setting.</p>
    /// <p>Format: <code>ddd:hh24:mi-ddd:hh24:mi</code> </p>
    /// <p>Valid days: Mon, Tue, Wed, Thu, Fri, Sat, Sun</p>
    /// <p>Constraints: Must be at least 30 minutes.</p>
    pub fn set_preferred_maintenance_window(
        mut self,
        input: ::std::option::Option<::std::string::String>,
    ) -> Self {
        self.inner = self.inner.set_preferred_maintenance_window(input);
        self
    }
    /// <p>This parameter does not apply to Amazon DocumentDB. Amazon DocumentDB does not perform minor version upgrades regardless of the value set.</p>
    pub fn auto_minor_version_upgrade(mut self, input: bool) -> Self {
        self.inner = self.inner.auto_minor_version_upgrade(input);
        self
    }
    /// <p>This parameter does not apply to Amazon DocumentDB. Amazon DocumentDB does not perform minor version upgrades regardless of the value set.</p>
    pub fn set_auto_minor_version_upgrade(mut self, input: ::std::option::Option<bool>) -> Self {
        self.inner = self.inner.set_auto_minor_version_upgrade(input);
        self
    }
    /// <p> The new instance identifier for the instance when renaming an instance. When you change the instance identifier, an instance reboot occurs immediately if you set <code>Apply Immediately</code> to <code>true</code>. It occurs during the next maintenance window if you set <code>Apply Immediately</code> to <code>false</code>. This value is stored as a lowercase string. </p>
    /// <p>Constraints:</p>
    /// <ul>
    /// <li> <p>Must contain from 1 to 63 letters, numbers, or hyphens.</p> </li>
    /// <li> <p>The first character must be a letter.</p> </li>
    /// <li> <p>Cannot end with a hyphen or contain two consecutive hyphens.</p> </li>
    /// </ul>
    /// <p>Example: <code>mydbinstance</code> </p>
    pub fn new_db_instance_identifier(
        mut self,
        input: impl ::std::convert::Into<::std::string::String>,
    ) -> Self {
        self.inner = self.inner.new_db_instance_identifier(input.into());
        self
    }
    /// <p> The new instance identifier for the instance when renaming an instance. When you change the instance identifier, an instance reboot occurs immediately if you set <code>Apply Immediately</code> to <code>true</code>. It occurs during the next maintenance window if you set <code>Apply Immediately</code> to <code>false</code>. This value is stored as a lowercase string. </p>
    /// <p>Constraints:</p>
    /// <ul>
    /// <li> <p>Must contain from 1 to 63 letters, numbers, or hyphens.</p> </li>
    /// <li> <p>The first character must be a letter.</p> </li>
    /// <li> <p>Cannot end with a hyphen or contain two consecutive hyphens.</p> </li>
    /// </ul>
    /// <p>Example: <code>mydbinstance</code> </p>
    pub fn set_new_db_instance_identifier(
        mut self,
        input: ::std::option::Option<::std::string::String>,
    ) -> Self {
        self.inner = self.inner.set_new_db_instance_identifier(input);
        self
    }
    /// <p>Indicates the certificate that needs to be associated with the instance.</p>
    pub fn ca_certificate_identifier(
        mut self,
        input: impl ::std::convert::Into<::std::string::String>,
    ) -> Self {
        self.inner = self.inner.ca_certificate_identifier(input.into());
        self
    }
    /// <p>Indicates the certificate that needs to be associated with the instance.</p>
    pub fn set_ca_certificate_identifier(
        mut self,
        input: ::std::option::Option<::std::string::String>,
    ) -> Self {
        self.inner = self.inner.set_ca_certificate_identifier(input);
        self
    }
    /// <p>A value that indicates whether to copy all tags from the DB instance to snapshots of the DB instance. By default, tags are not copied.</p>
    pub fn copy_tags_to_snapshot(mut self, input: bool) -> Self {
        self.inner = self.inner.copy_tags_to_snapshot(input);
        self
    }
    /// <p>A value that indicates whether to copy all tags from the DB instance to snapshots of the DB instance. By default, tags are not copied.</p>
    pub fn set_copy_tags_to_snapshot(mut self, input: ::std::option::Option<bool>) -> Self {
        self.inner = self.inner.set_copy_tags_to_snapshot(input);
        self
    }
    /// <p>A value that specifies the order in which an Amazon DocumentDB replica is promoted to the primary instance after a failure of the existing primary instance.</p>
    /// <p>Default: 1</p>
    /// <p>Valid values: 0-15</p>
    pub fn promotion_tier(mut self, input: i32) -> Self {
        self.inner = self.inner.promotion_tier(input);
        self
    }
    /// <p>A value that specifies the order in which an Amazon DocumentDB replica is promoted to the primary instance after a failure of the existing primary instance.</p>
    /// <p>Default: 1</p>
    /// <p>Valid values: 0-15</p>
    pub fn set_promotion_tier(mut self, input: ::std::option::Option<i32>) -> Self {
        self.inner = self.inner.set_promotion_tier(input);
        self
    }
    /// <p>A value that indicates whether to enable Performance Insights for the DB Instance. For more information, see <a href="https://docs.aws.amazon.com/documentdb/latest/developerguide/performance-insights.html">Using Amazon Performance Insights</a>.</p>
    pub fn enable_performance_insights(mut self, input: bool) -> Self {
        self.inner = self.inner.enable_performance_insights(input);
        self
    }
    /// <p>A value that indicates whether to enable Performance Insights for the DB Instance. For more information, see <a href="https://docs.aws.amazon.com/documentdb/latest/developerguide/performance-insights.html">Using Amazon Performance Insights</a>.</p>
    pub fn set_enable_performance_insights(mut self, input: ::std::option::Option<bool>) -> Self {
        self.inner = self.inner.set_enable_performance_insights(input);
        self
    }
    /// <p>The KMS key identifier for encryption of Performance Insights data.</p>
    /// <p>The KMS key identifier is the key ARN, key ID, alias ARN, or alias name for the KMS key.</p>
    /// <p>If you do not specify a value for PerformanceInsightsKMSKeyId, then Amazon DocumentDB uses your default KMS key. There is a default KMS key for your Amazon Web Services account. Your Amazon Web Services account has a different default KMS key for each Amazon Web Services region.</p>
    pub fn performance_insights_kms_key_id(
        mut self,
        input: impl ::std::convert::Into<::std::string::String>,
    ) -> Self {
        self.inner = self.inner.performance_insights_kms_key_id(input.into());
        self
    }
    /// <p>The KMS key identifier for encryption of Performance Insights data.</p>
    /// <p>The KMS key identifier is the key ARN, key ID, alias ARN, or alias name for the KMS key.</p>
    /// <p>If you do not specify a value for PerformanceInsightsKMSKeyId, then Amazon DocumentDB uses your default KMS key. There is a default KMS key for your Amazon Web Services account. Your Amazon Web Services account has a different default KMS key for each Amazon Web Services region.</p>
    pub fn set_performance_insights_kms_key_id(
        mut self,
        input: ::std::option::Option<::std::string::String>,
    ) -> Self {
        self.inner = self.inner.set_performance_insights_kms_key_id(input);
        self
    }
}