#[non_exhaustive]
pub enum Error { AccessDeniedException(AccessDeniedException), ConflictException(ConflictException), InternalServerException(InternalServerException), ResourceNotFoundException(ResourceNotFoundException), ServiceQuotaExceededException(ServiceQuotaExceededException), TooManyRequestsException(TooManyRequestsException), ValidationException(ValidationException), Unhandled(Unhandled), }
Expand description

All possible error types for this service.

Variants (Non-exhaustive)§

This enum is marked as non-exhaustive
Non-exhaustive enums could have additional variants added in future. Therefore, when matching against variants of non-exhaustive enums, an extra wildcard arm must be added to account for any future variants.
§

AccessDeniedException(AccessDeniedException)

The request issuer does not have permission to access this resource or perform this operation.

§

ConflictException(ConflictException)

The request attempted an invalid action.

§

InternalServerException(InternalServerException)

The request was valid but failed because of a problem with the service.

§

ResourceNotFoundException(ResourceNotFoundException)

The request refers to a nonexistent resource.

§

ServiceQuotaExceededException(ServiceQuotaExceededException)

This request cannot be completed for one of the following reasons.

  • The request would cause the number of member accounts in the behavior graph to exceed the maximum allowed. A behavior graph cannot have more than 1200 member accounts.

  • The request would cause the data rate for the behavior graph to exceed the maximum allowed.

  • Detective is unable to verify the data rate for the member account. This is usually because the member account is not enrolled in Amazon GuardDuty.

§

TooManyRequestsException(TooManyRequestsException)

The request cannot be completed because too many other requests are occurring at the same time.

§

ValidationException(ValidationException)

The request parameters are invalid.

§

Unhandled(Unhandled)

👎Deprecated: Matching Unhandled directly is not forwards compatible. Instead, match using a variable wildcard pattern and check .code():    err if err.code() == Some("SpecificExceptionCode") => { /* handle the error */ } See ProvideErrorMetadata for what information is available for the error.

An unexpected error occurred (e.g., invalid JSON returned by the service or an unknown error code).

Trait Implementations§

source§

impl Debug for Error

source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more
source§

impl Display for Error

source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more
source§

impl Error for Error

source§

fn source(&self) -> Option<&(dyn Error + 'static)>

The lower-level source of this error, if any. Read more
1.0.0 · source§

fn description(&self) -> &str

👎Deprecated since 1.42.0: use the Display impl or to_string()
1.0.0 · source§

fn cause(&self) -> Option<&dyn Error>

👎Deprecated since 1.33.0: replaced by Error::source, which can support downcasting
source§

fn provide<'a>(&'a self, request: &mut Request<'a>)

🔬This is a nightly-only experimental API. (error_generic_member_access)
Provides type based access to context intended for error reports. Read more
source§

impl From<AcceptInvitationError> for Error

source§

fn from(err: AcceptInvitationError) -> Self

Converts to this type from the input type.
source§

impl From<BatchGetGraphMemberDatasourcesError> for Error

source§

fn from(err: BatchGetGraphMemberDatasourcesError) -> Self

Converts to this type from the input type.
source§

impl From<BatchGetMembershipDatasourcesError> for Error

source§

fn from(err: BatchGetMembershipDatasourcesError) -> Self

Converts to this type from the input type.
source§

impl From<BuildError> for Error

source§

fn from(value: BuildError) -> Self

Converts to this type from the input type.
source§

impl From<CreateGraphError> for Error

source§

fn from(err: CreateGraphError) -> Self

Converts to this type from the input type.
source§

impl From<CreateMembersError> for Error

source§

fn from(err: CreateMembersError) -> Self

Converts to this type from the input type.
source§

impl From<DeleteGraphError> for Error

source§

fn from(err: DeleteGraphError) -> Self

Converts to this type from the input type.
source§

impl From<DeleteMembersError> for Error

source§

fn from(err: DeleteMembersError) -> Self

Converts to this type from the input type.
source§

impl From<DescribeOrganizationConfigurationError> for Error

source§

fn from(err: DescribeOrganizationConfigurationError) -> Self

Converts to this type from the input type.
source§

impl From<DisableOrganizationAdminAccountError> for Error

source§

fn from(err: DisableOrganizationAdminAccountError) -> Self

Converts to this type from the input type.
source§

impl From<DisassociateMembershipError> for Error

source§

fn from(err: DisassociateMembershipError) -> Self

Converts to this type from the input type.
source§

impl From<EnableOrganizationAdminAccountError> for Error

source§

fn from(err: EnableOrganizationAdminAccountError) -> Self

Converts to this type from the input type.
source§

impl From<GetMembersError> for Error

source§

fn from(err: GetMembersError) -> Self

Converts to this type from the input type.
source§

impl From<ListDatasourcePackagesError> for Error

source§

fn from(err: ListDatasourcePackagesError) -> Self

Converts to this type from the input type.
source§

impl From<ListGraphsError> for Error

source§

fn from(err: ListGraphsError) -> Self

Converts to this type from the input type.
source§

impl From<ListInvitationsError> for Error

source§

fn from(err: ListInvitationsError) -> Self

Converts to this type from the input type.
source§

impl From<ListMembersError> for Error

source§

fn from(err: ListMembersError) -> Self

Converts to this type from the input type.
source§

impl From<ListOrganizationAdminAccountsError> for Error

source§

fn from(err: ListOrganizationAdminAccountsError) -> Self

Converts to this type from the input type.
source§

impl From<ListTagsForResourceError> for Error

source§

fn from(err: ListTagsForResourceError) -> Self

Converts to this type from the input type.
source§

impl From<RejectInvitationError> for Error

source§

fn from(err: RejectInvitationError) -> Self

Converts to this type from the input type.
source§

impl<R> From<SdkError<AcceptInvitationError, R>> for Errorwhere R: Send + Sync + Debug + 'static,

source§

fn from(err: SdkError<AcceptInvitationError, R>) -> Self

Converts to this type from the input type.
source§

impl<R> From<SdkError<BatchGetGraphMemberDatasourcesError, R>> for Errorwhere R: Send + Sync + Debug + 'static,

source§

fn from(err: SdkError<BatchGetGraphMemberDatasourcesError, R>) -> Self

Converts to this type from the input type.
source§

impl<R> From<SdkError<BatchGetMembershipDatasourcesError, R>> for Errorwhere R: Send + Sync + Debug + 'static,

source§

fn from(err: SdkError<BatchGetMembershipDatasourcesError, R>) -> Self

Converts to this type from the input type.
source§

impl<R> From<SdkError<CreateGraphError, R>> for Errorwhere R: Send + Sync + Debug + 'static,

source§

fn from(err: SdkError<CreateGraphError, R>) -> Self

Converts to this type from the input type.
source§

impl<R> From<SdkError<CreateMembersError, R>> for Errorwhere R: Send + Sync + Debug + 'static,

source§

fn from(err: SdkError<CreateMembersError, R>) -> Self

Converts to this type from the input type.
source§

impl<R> From<SdkError<DeleteGraphError, R>> for Errorwhere R: Send + Sync + Debug + 'static,

source§

fn from(err: SdkError<DeleteGraphError, R>) -> Self

Converts to this type from the input type.
source§

impl<R> From<SdkError<DeleteMembersError, R>> for Errorwhere R: Send + Sync + Debug + 'static,

source§

fn from(err: SdkError<DeleteMembersError, R>) -> Self

Converts to this type from the input type.
source§

impl<R> From<SdkError<DescribeOrganizationConfigurationError, R>> for Errorwhere R: Send + Sync + Debug + 'static,

source§

fn from(err: SdkError<DescribeOrganizationConfigurationError, R>) -> Self

Converts to this type from the input type.
source§

impl<R> From<SdkError<DisableOrganizationAdminAccountError, R>> for Errorwhere R: Send + Sync + Debug + 'static,

source§

fn from(err: SdkError<DisableOrganizationAdminAccountError, R>) -> Self

Converts to this type from the input type.
source§

impl<R> From<SdkError<DisassociateMembershipError, R>> for Errorwhere R: Send + Sync + Debug + 'static,

source§

fn from(err: SdkError<DisassociateMembershipError, R>) -> Self

Converts to this type from the input type.
source§

impl<R> From<SdkError<EnableOrganizationAdminAccountError, R>> for Errorwhere R: Send + Sync + Debug + 'static,

source§

fn from(err: SdkError<EnableOrganizationAdminAccountError, R>) -> Self

Converts to this type from the input type.
source§

impl<R> From<SdkError<GetMembersError, R>> for Errorwhere R: Send + Sync + Debug + 'static,

source§

fn from(err: SdkError<GetMembersError, R>) -> Self

Converts to this type from the input type.
source§

impl<R> From<SdkError<ListDatasourcePackagesError, R>> for Errorwhere R: Send + Sync + Debug + 'static,

source§

fn from(err: SdkError<ListDatasourcePackagesError, R>) -> Self

Converts to this type from the input type.
source§

impl<R> From<SdkError<ListGraphsError, R>> for Errorwhere R: Send + Sync + Debug + 'static,

source§

fn from(err: SdkError<ListGraphsError, R>) -> Self

Converts to this type from the input type.
source§

impl<R> From<SdkError<ListInvitationsError, R>> for Errorwhere R: Send + Sync + Debug + 'static,

source§

fn from(err: SdkError<ListInvitationsError, R>) -> Self

Converts to this type from the input type.
source§

impl<R> From<SdkError<ListMembersError, R>> for Errorwhere R: Send + Sync + Debug + 'static,

source§

fn from(err: SdkError<ListMembersError, R>) -> Self

Converts to this type from the input type.
source§

impl<R> From<SdkError<ListOrganizationAdminAccountsError, R>> for Errorwhere R: Send + Sync + Debug + 'static,

source§

fn from(err: SdkError<ListOrganizationAdminAccountsError, R>) -> Self

Converts to this type from the input type.
source§

impl<R> From<SdkError<ListTagsForResourceError, R>> for Errorwhere R: Send + Sync + Debug + 'static,

source§

fn from(err: SdkError<ListTagsForResourceError, R>) -> Self

Converts to this type from the input type.
source§

impl<R> From<SdkError<RejectInvitationError, R>> for Errorwhere R: Send + Sync + Debug + 'static,

source§

fn from(err: SdkError<RejectInvitationError, R>) -> Self

Converts to this type from the input type.
source§

impl<R> From<SdkError<StartMonitoringMemberError, R>> for Errorwhere R: Send + Sync + Debug + 'static,

source§

fn from(err: SdkError<StartMonitoringMemberError, R>) -> Self

Converts to this type from the input type.
source§

impl<R> From<SdkError<TagResourceError, R>> for Errorwhere R: Send + Sync + Debug + 'static,

source§

fn from(err: SdkError<TagResourceError, R>) -> Self

Converts to this type from the input type.
source§

impl<R> From<SdkError<UntagResourceError, R>> for Errorwhere R: Send + Sync + Debug + 'static,

source§

fn from(err: SdkError<UntagResourceError, R>) -> Self

Converts to this type from the input type.
source§

impl<R> From<SdkError<UpdateDatasourcePackagesError, R>> for Errorwhere R: Send + Sync + Debug + 'static,

source§

fn from(err: SdkError<UpdateDatasourcePackagesError, R>) -> Self

Converts to this type from the input type.
source§

impl<R> From<SdkError<UpdateOrganizationConfigurationError, R>> for Errorwhere R: Send + Sync + Debug + 'static,

source§

fn from(err: SdkError<UpdateOrganizationConfigurationError, R>) -> Self

Converts to this type from the input type.
source§

impl From<StartMonitoringMemberError> for Error

source§

fn from(err: StartMonitoringMemberError) -> Self

Converts to this type from the input type.
source§

impl From<TagResourceError> for Error

source§

fn from(err: TagResourceError) -> Self

Converts to this type from the input type.
source§

impl From<UntagResourceError> for Error

source§

fn from(err: UntagResourceError) -> Self

Converts to this type from the input type.
source§

impl From<UpdateDatasourcePackagesError> for Error

source§

fn from(err: UpdateDatasourcePackagesError) -> Self

Converts to this type from the input type.
source§

impl From<UpdateOrganizationConfigurationError> for Error

source§

fn from(err: UpdateOrganizationConfigurationError) -> Self

Converts to this type from the input type.
source§

impl ProvideErrorMetadata for Error

source§

fn meta(&self) -> &ErrorMetadata

Returns error metadata, which includes the error code, message, request ID, and potentially additional information.
source§

fn code(&self) -> Option<&str>

Returns the error code if it’s available.
source§

fn message(&self) -> Option<&str>

Returns the error message, if there is one.
source§

impl RequestId for Error

source§

fn request_id(&self) -> Option<&str>

Returns the request ID, or None if the service could not be reached.

Auto Trait Implementations§

§

impl !RefUnwindSafe for Error

§

impl Send for Error

§

impl Sync for Error

§

impl Unpin for Error

§

impl !UnwindSafe for Error

Blanket Implementations§

source§

impl<T> Any for Twhere T: 'static + ?Sized,

source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
source§

impl<T> Borrow<T> for Twhere T: ?Sized,

source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
source§

impl<T> BorrowMut<T> for Twhere T: ?Sized,

source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
source§

impl<T> From<T> for T

source§

fn from(t: T) -> T

Returns the argument unchanged.

source§

impl<T> Instrument for T

source§

fn instrument(self, span: Span) -> Instrumented<Self>

Instruments this type with the provided Span, returning an Instrumented wrapper. Read more
source§

fn in_current_span(self) -> Instrumented<Self>

Instruments this type with the current Span, returning an Instrumented wrapper. Read more
source§

impl<T, U> Into<U> for Twhere U: From<T>,

source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

source§

impl<Unshared, Shared> IntoShared<Shared> for Unsharedwhere Shared: FromUnshared<Unshared>,

source§

fn into_shared(self) -> Shared

Creates a shared type from an unshared type.
source§

impl<T> Same for T

§

type Output = T

Should always be Self
source§

impl<T> ToString for Twhere T: Display + ?Sized,

source§

default fn to_string(&self) -> String

Converts the given value to a String. Read more
source§

impl<T, U> TryFrom<U> for Twhere U: Into<T>,

§

type Error = Infallible

The type returned in the event of a conversion error.
source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
source§

impl<T, U> TryInto<U> for Twhere U: TryFrom<T>,

§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.
source§

impl<T> WithSubscriber for T

source§

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self>where S: Into<Dispatch>,

Attaches the provided Subscriber to this type, returning a WithDispatch wrapper. Read more
source§

fn with_current_subscriber(self) -> WithDispatch<Self>

Attaches the current default Subscriber to this type, returning a WithDispatch wrapper. Read more