aws_sdk_datasync/operation/create_location_smb/

builders.rs

// Code generated by software.amazon.smithy.rust.codegen.smithy-rs. DO NOT EDIT.
pub use crate::operation::create_location_smb::_create_location_smb_output::CreateLocationSmbOutputBuilder;

pub use crate::operation::create_location_smb::_create_location_smb_input::CreateLocationSmbInputBuilder;

impl crate::operation::create_location_smb::builders::CreateLocationSmbInputBuilder {
    /// Sends a request with this input using the given client.
    pub async fn send_with(
        self,
        client: &crate::Client,
    ) -> ::std::result::Result<
        crate::operation::create_location_smb::CreateLocationSmbOutput,
        ::aws_smithy_runtime_api::client::result::SdkError<
            crate::operation::create_location_smb::CreateLocationSmbError,
            ::aws_smithy_runtime_api::client::orchestrator::HttpResponse,
        >,
    > {
        let mut fluent_builder = client.create_location_smb();
        fluent_builder.inner = self;
        fluent_builder.send().await
    }
}
/// Fluent builder constructing a request to `CreateLocationSmb`.
///
/// <p>Creates a transfer <i>location</i> for a Server Message Block (SMB) file server. DataSync can use this location as a source or destination for transferring data.</p>
/// <p>Before you begin, make sure that you understand how DataSync accesses SMB file servers. For more information, see <a href="https://docs.aws.amazon.com/datasync/latest/userguide/create-smb-location.html#configuring-smb-permissions">Providing DataSync access to SMB file servers</a>.</p>
#[derive(::std::clone::Clone, ::std::fmt::Debug)]
pub struct CreateLocationSmbFluentBuilder {
    handle: ::std::sync::Arc<crate::client::Handle>,
    inner: crate::operation::create_location_smb::builders::CreateLocationSmbInputBuilder,
    config_override: ::std::option::Option<crate::config::Builder>,
}
impl
    crate::client::customize::internal::CustomizableSend<
        crate::operation::create_location_smb::CreateLocationSmbOutput,
        crate::operation::create_location_smb::CreateLocationSmbError,
    > for CreateLocationSmbFluentBuilder
{
    fn send(
        self,
        config_override: crate::config::Builder,
    ) -> crate::client::customize::internal::BoxFuture<
        crate::client::customize::internal::SendResult<
            crate::operation::create_location_smb::CreateLocationSmbOutput,
            crate::operation::create_location_smb::CreateLocationSmbError,
        >,
    > {
        ::std::boxed::Box::pin(async move { self.config_override(config_override).send().await })
    }
}
impl CreateLocationSmbFluentBuilder {
    /// Creates a new `CreateLocationSmbFluentBuilder`.
    pub(crate) fn new(handle: ::std::sync::Arc<crate::client::Handle>) -> Self {
        Self {
            handle,
            inner: ::std::default::Default::default(),
            config_override: ::std::option::Option::None,
        }
    }
    /// Access the CreateLocationSmb as a reference.
    pub fn as_input(&self) -> &crate::operation::create_location_smb::builders::CreateLocationSmbInputBuilder {
        &self.inner
    }
    /// Sends the request and returns the response.
    ///
    /// If an error occurs, an `SdkError` will be returned with additional details that
    /// can be matched against.
    ///
    /// By default, any retryable failures will be retried twice. Retry behavior
    /// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
    /// set when configuring the client.
    pub async fn send(
        self,
    ) -> ::std::result::Result<
        crate::operation::create_location_smb::CreateLocationSmbOutput,
        ::aws_smithy_runtime_api::client::result::SdkError<
            crate::operation::create_location_smb::CreateLocationSmbError,
            ::aws_smithy_runtime_api::client::orchestrator::HttpResponse,
        >,
    > {
        let input = self
            .inner
            .build()
            .map_err(::aws_smithy_runtime_api::client::result::SdkError::construction_failure)?;
        let runtime_plugins = crate::operation::create_location_smb::CreateLocationSmb::operation_runtime_plugins(
            self.handle.runtime_plugins.clone(),
            &self.handle.conf,
            self.config_override,
        );
        crate::operation::create_location_smb::CreateLocationSmb::orchestrate(&runtime_plugins, input).await
    }

    /// Consumes this builder, creating a customizable operation that can be modified before being sent.
    pub fn customize(
        self,
    ) -> crate::client::customize::CustomizableOperation<
        crate::operation::create_location_smb::CreateLocationSmbOutput,
        crate::operation::create_location_smb::CreateLocationSmbError,
        Self,
    > {
        crate::client::customize::CustomizableOperation::new(self)
    }
    pub(crate) fn config_override(mut self, config_override: impl ::std::convert::Into<crate::config::Builder>) -> Self {
        self.set_config_override(::std::option::Option::Some(config_override.into()));
        self
    }

    pub(crate) fn set_config_override(&mut self, config_override: ::std::option::Option<crate::config::Builder>) -> &mut Self {
        self.config_override = config_override;
        self
    }
    /// <p>Specifies the name of the share exported by your SMB file server where DataSync will read or write data. You can include a subdirectory in the share path (for example, <code>/path/to/subdirectory</code>). Make sure that other SMB clients in your network can also mount this path.</p>
    /// <p>To copy all data in the subdirectory, DataSync must be able to mount the SMB share and access all of its data. For more information, see <a href="https://docs.aws.amazon.com/datasync/latest/userguide/create-smb-location.html#configuring-smb-permissions">Providing DataSync access to SMB file servers</a>.</p>
    pub fn subdirectory(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
        self.inner = self.inner.subdirectory(input.into());
        self
    }
    /// <p>Specifies the name of the share exported by your SMB file server where DataSync will read or write data. You can include a subdirectory in the share path (for example, <code>/path/to/subdirectory</code>). Make sure that other SMB clients in your network can also mount this path.</p>
    /// <p>To copy all data in the subdirectory, DataSync must be able to mount the SMB share and access all of its data. For more information, see <a href="https://docs.aws.amazon.com/datasync/latest/userguide/create-smb-location.html#configuring-smb-permissions">Providing DataSync access to SMB file servers</a>.</p>
    pub fn set_subdirectory(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
        self.inner = self.inner.set_subdirectory(input);
        self
    }
    /// <p>Specifies the name of the share exported by your SMB file server where DataSync will read or write data. You can include a subdirectory in the share path (for example, <code>/path/to/subdirectory</code>). Make sure that other SMB clients in your network can also mount this path.</p>
    /// <p>To copy all data in the subdirectory, DataSync must be able to mount the SMB share and access all of its data. For more information, see <a href="https://docs.aws.amazon.com/datasync/latest/userguide/create-smb-location.html#configuring-smb-permissions">Providing DataSync access to SMB file servers</a>.</p>
    pub fn get_subdirectory(&self) -> &::std::option::Option<::std::string::String> {
        self.inner.get_subdirectory()
    }
    /// <p>Specifies the domain name or IP address (IPv4 or IPv6) of the SMB file server that your DataSync agent connects to.</p><note>
    /// <p>If you're using Kerberos authentication, you must specify a domain name.</p>
    /// </note>
    pub fn server_hostname(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
        self.inner = self.inner.server_hostname(input.into());
        self
    }
    /// <p>Specifies the domain name or IP address (IPv4 or IPv6) of the SMB file server that your DataSync agent connects to.</p><note>
    /// <p>If you're using Kerberos authentication, you must specify a domain name.</p>
    /// </note>
    pub fn set_server_hostname(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
        self.inner = self.inner.set_server_hostname(input);
        self
    }
    /// <p>Specifies the domain name or IP address (IPv4 or IPv6) of the SMB file server that your DataSync agent connects to.</p><note>
    /// <p>If you're using Kerberos authentication, you must specify a domain name.</p>
    /// </note>
    pub fn get_server_hostname(&self) -> &::std::option::Option<::std::string::String> {
        self.inner.get_server_hostname()
    }
    /// <p>Specifies the user that can mount and access the files, folders, and file metadata in your SMB file server. This parameter applies only if <code>AuthenticationType</code> is set to <code>NTLM</code>.</p>
    /// <p>For information about choosing a user with the right level of access for your transfer, see <a href="https://docs.aws.amazon.com/datasync/latest/userguide/create-smb-location.html#configuring-smb-permissions">Providing DataSync access to SMB file servers</a>.</p>
    pub fn user(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
        self.inner = self.inner.user(input.into());
        self
    }
    /// <p>Specifies the user that can mount and access the files, folders, and file metadata in your SMB file server. This parameter applies only if <code>AuthenticationType</code> is set to <code>NTLM</code>.</p>
    /// <p>For information about choosing a user with the right level of access for your transfer, see <a href="https://docs.aws.amazon.com/datasync/latest/userguide/create-smb-location.html#configuring-smb-permissions">Providing DataSync access to SMB file servers</a>.</p>
    pub fn set_user(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
        self.inner = self.inner.set_user(input);
        self
    }
    /// <p>Specifies the user that can mount and access the files, folders, and file metadata in your SMB file server. This parameter applies only if <code>AuthenticationType</code> is set to <code>NTLM</code>.</p>
    /// <p>For information about choosing a user with the right level of access for your transfer, see <a href="https://docs.aws.amazon.com/datasync/latest/userguide/create-smb-location.html#configuring-smb-permissions">Providing DataSync access to SMB file servers</a>.</p>
    pub fn get_user(&self) -> &::std::option::Option<::std::string::String> {
        self.inner.get_user()
    }
    /// <p>Specifies the Windows domain name that your SMB file server belongs to. This parameter applies only if <code>AuthenticationType</code> is set to <code>NTLM</code>.</p>
    /// <p>If you have multiple domains in your environment, configuring this parameter makes sure that DataSync connects to the right file server.</p>
    pub fn domain(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
        self.inner = self.inner.domain(input.into());
        self
    }
    /// <p>Specifies the Windows domain name that your SMB file server belongs to. This parameter applies only if <code>AuthenticationType</code> is set to <code>NTLM</code>.</p>
    /// <p>If you have multiple domains in your environment, configuring this parameter makes sure that DataSync connects to the right file server.</p>
    pub fn set_domain(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
        self.inner = self.inner.set_domain(input);
        self
    }
    /// <p>Specifies the Windows domain name that your SMB file server belongs to. This parameter applies only if <code>AuthenticationType</code> is set to <code>NTLM</code>.</p>
    /// <p>If you have multiple domains in your environment, configuring this parameter makes sure that DataSync connects to the right file server.</p>
    pub fn get_domain(&self) -> &::std::option::Option<::std::string::String> {
        self.inner.get_domain()
    }
    /// <p>Specifies the password of the user who can mount your SMB file server and has permission to access the files and folders involved in your transfer. This parameter applies only if <code>AuthenticationType</code> is set to <code>NTLM</code>.</p>
    pub fn password(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
        self.inner = self.inner.password(input.into());
        self
    }
    /// <p>Specifies the password of the user who can mount your SMB file server and has permission to access the files and folders involved in your transfer. This parameter applies only if <code>AuthenticationType</code> is set to <code>NTLM</code>.</p>
    pub fn set_password(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
        self.inner = self.inner.set_password(input);
        self
    }
    /// <p>Specifies the password of the user who can mount your SMB file server and has permission to access the files and folders involved in your transfer. This parameter applies only if <code>AuthenticationType</code> is set to <code>NTLM</code>.</p>
    pub fn get_password(&self) -> &::std::option::Option<::std::string::String> {
        self.inner.get_password()
    }
    /// <p>Specifies configuration information for a DataSync-managed secret, either a <code>Password</code> or <code>KerberosKeytab</code> (for <code>NTLM</code> (default) and <code>KERBEROS</code> authentication types, respectively) that DataSync uses to access a specific SMB storage location, with a customer-managed KMS key.</p>
    /// <p>When you include this parameter as part of a <code>CreateLocationSmbRequest</code> request, you provide only the KMS key ARN. DataSync uses this KMS key together with either the <code>Password</code> or <code>KerberosKeytab</code> you specify to create a DataSync-managed secret to store the location access credentials.</p>
    /// <p>Make sure that DataSync has permission to access the KMS key that you specify.</p><note>
    /// <p>You can use either <code>CmkSecretConfig</code> (with either <code>Password</code> or <code>KerberosKeytab</code>) or <code>CustomSecretConfig</code> (without any <code>Password</code> and <code>KerberosKeytab</code>) to provide credentials for a <code>CreateLocationSmbRequest</code> request. Do not provide both <code>CmkSecretConfig</code> and <code>CustomSecretConfig</code> parameters for the same request.</p>
    /// </note>
    pub fn cmk_secret_config(mut self, input: crate::types::CmkSecretConfig) -> Self {
        self.inner = self.inner.cmk_secret_config(input);
        self
    }
    /// <p>Specifies configuration information for a DataSync-managed secret, either a <code>Password</code> or <code>KerberosKeytab</code> (for <code>NTLM</code> (default) and <code>KERBEROS</code> authentication types, respectively) that DataSync uses to access a specific SMB storage location, with a customer-managed KMS key.</p>
    /// <p>When you include this parameter as part of a <code>CreateLocationSmbRequest</code> request, you provide only the KMS key ARN. DataSync uses this KMS key together with either the <code>Password</code> or <code>KerberosKeytab</code> you specify to create a DataSync-managed secret to store the location access credentials.</p>
    /// <p>Make sure that DataSync has permission to access the KMS key that you specify.</p><note>
    /// <p>You can use either <code>CmkSecretConfig</code> (with either <code>Password</code> or <code>KerberosKeytab</code>) or <code>CustomSecretConfig</code> (without any <code>Password</code> and <code>KerberosKeytab</code>) to provide credentials for a <code>CreateLocationSmbRequest</code> request. Do not provide both <code>CmkSecretConfig</code> and <code>CustomSecretConfig</code> parameters for the same request.</p>
    /// </note>
    pub fn set_cmk_secret_config(mut self, input: ::std::option::Option<crate::types::CmkSecretConfig>) -> Self {
        self.inner = self.inner.set_cmk_secret_config(input);
        self
    }
    /// <p>Specifies configuration information for a DataSync-managed secret, either a <code>Password</code> or <code>KerberosKeytab</code> (for <code>NTLM</code> (default) and <code>KERBEROS</code> authentication types, respectively) that DataSync uses to access a specific SMB storage location, with a customer-managed KMS key.</p>
    /// <p>When you include this parameter as part of a <code>CreateLocationSmbRequest</code> request, you provide only the KMS key ARN. DataSync uses this KMS key together with either the <code>Password</code> or <code>KerberosKeytab</code> you specify to create a DataSync-managed secret to store the location access credentials.</p>
    /// <p>Make sure that DataSync has permission to access the KMS key that you specify.</p><note>
    /// <p>You can use either <code>CmkSecretConfig</code> (with either <code>Password</code> or <code>KerberosKeytab</code>) or <code>CustomSecretConfig</code> (without any <code>Password</code> and <code>KerberosKeytab</code>) to provide credentials for a <code>CreateLocationSmbRequest</code> request. Do not provide both <code>CmkSecretConfig</code> and <code>CustomSecretConfig</code> parameters for the same request.</p>
    /// </note>
    pub fn get_cmk_secret_config(&self) -> &::std::option::Option<crate::types::CmkSecretConfig> {
        self.inner.get_cmk_secret_config()
    }
    /// <p>Specifies configuration information for a customer-managed Secrets Manager secret where the SMB storage location credentials is stored in Secrets Manager as plain text (for <code>Password</code>) or binary (for <code>KerberosKeytab</code>). This configuration includes the secret ARN, and the ARN for an IAM role that provides access to the secret.</p><note>
    /// <p>You can use either <code>CmkSecretConfig</code> (with <code>SasConfiguration</code>) or <code>CustomSecretConfig</code> (without <code>SasConfiguration</code>) to provide credentials for a <code>CreateLocationSmbRequest</code> request. Do not provide both parameters for the same request.</p>
    /// </note>
    pub fn custom_secret_config(mut self, input: crate::types::CustomSecretConfig) -> Self {
        self.inner = self.inner.custom_secret_config(input);
        self
    }
    /// <p>Specifies configuration information for a customer-managed Secrets Manager secret where the SMB storage location credentials is stored in Secrets Manager as plain text (for <code>Password</code>) or binary (for <code>KerberosKeytab</code>). This configuration includes the secret ARN, and the ARN for an IAM role that provides access to the secret.</p><note>
    /// <p>You can use either <code>CmkSecretConfig</code> (with <code>SasConfiguration</code>) or <code>CustomSecretConfig</code> (without <code>SasConfiguration</code>) to provide credentials for a <code>CreateLocationSmbRequest</code> request. Do not provide both parameters for the same request.</p>
    /// </note>
    pub fn set_custom_secret_config(mut self, input: ::std::option::Option<crate::types::CustomSecretConfig>) -> Self {
        self.inner = self.inner.set_custom_secret_config(input);
        self
    }
    /// <p>Specifies configuration information for a customer-managed Secrets Manager secret where the SMB storage location credentials is stored in Secrets Manager as plain text (for <code>Password</code>) or binary (for <code>KerberosKeytab</code>). This configuration includes the secret ARN, and the ARN for an IAM role that provides access to the secret.</p><note>
    /// <p>You can use either <code>CmkSecretConfig</code> (with <code>SasConfiguration</code>) or <code>CustomSecretConfig</code> (without <code>SasConfiguration</code>) to provide credentials for a <code>CreateLocationSmbRequest</code> request. Do not provide both parameters for the same request.</p>
    /// </note>
    pub fn get_custom_secret_config(&self) -> &::std::option::Option<crate::types::CustomSecretConfig> {
        self.inner.get_custom_secret_config()
    }
    ///
    /// Appends an item to `AgentArns`.
    ///
    /// To override the contents of this collection use [`set_agent_arns`](Self::set_agent_arns).
    ///
    /// <p>Specifies the DataSync agent (or agents) that can connect to your SMB file server. You specify an agent by using its Amazon Resource Name (ARN).</p>
    pub fn agent_arns(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
        self.inner = self.inner.agent_arns(input.into());
        self
    }
    /// <p>Specifies the DataSync agent (or agents) that can connect to your SMB file server. You specify an agent by using its Amazon Resource Name (ARN).</p>
    pub fn set_agent_arns(mut self, input: ::std::option::Option<::std::vec::Vec<::std::string::String>>) -> Self {
        self.inner = self.inner.set_agent_arns(input);
        self
    }
    /// <p>Specifies the DataSync agent (or agents) that can connect to your SMB file server. You specify an agent by using its Amazon Resource Name (ARN).</p>
    pub fn get_agent_arns(&self) -> &::std::option::Option<::std::vec::Vec<::std::string::String>> {
        self.inner.get_agent_arns()
    }
    /// <p>Specifies the version of the SMB protocol that DataSync uses to access your SMB file server.</p>
    pub fn mount_options(mut self, input: crate::types::SmbMountOptions) -> Self {
        self.inner = self.inner.mount_options(input);
        self
    }
    /// <p>Specifies the version of the SMB protocol that DataSync uses to access your SMB file server.</p>
    pub fn set_mount_options(mut self, input: ::std::option::Option<crate::types::SmbMountOptions>) -> Self {
        self.inner = self.inner.set_mount_options(input);
        self
    }
    /// <p>Specifies the version of the SMB protocol that DataSync uses to access your SMB file server.</p>
    pub fn get_mount_options(&self) -> &::std::option::Option<crate::types::SmbMountOptions> {
        self.inner.get_mount_options()
    }
    ///
    /// Appends an item to `Tags`.
    ///
    /// To override the contents of this collection use [`set_tags`](Self::set_tags).
    ///
    /// <p>Specifies labels that help you categorize, filter, and search for your Amazon Web Services resources. We recommend creating at least a name tag for your location.</p>
    pub fn tags(mut self, input: crate::types::TagListEntry) -> Self {
        self.inner = self.inner.tags(input);
        self
    }
    /// <p>Specifies labels that help you categorize, filter, and search for your Amazon Web Services resources. We recommend creating at least a name tag for your location.</p>
    pub fn set_tags(mut self, input: ::std::option::Option<::std::vec::Vec<crate::types::TagListEntry>>) -> Self {
        self.inner = self.inner.set_tags(input);
        self
    }
    /// <p>Specifies labels that help you categorize, filter, and search for your Amazon Web Services resources. We recommend creating at least a name tag for your location.</p>
    pub fn get_tags(&self) -> &::std::option::Option<::std::vec::Vec<crate::types::TagListEntry>> {
        self.inner.get_tags()
    }
    /// <p>Specifies the authentication protocol that DataSync uses to connect to your SMB file server. DataSync supports <code>NTLM</code> (default) and <code>KERBEROS</code> authentication.</p>
    /// <p>For more information, see <a href="https://docs.aws.amazon.com/datasync/latest/userguide/create-smb-location.html#configuring-smb-permissions">Providing DataSync access to SMB file servers</a>.</p>
    pub fn authentication_type(mut self, input: crate::types::SmbAuthenticationType) -> Self {
        self.inner = self.inner.authentication_type(input);
        self
    }
    /// <p>Specifies the authentication protocol that DataSync uses to connect to your SMB file server. DataSync supports <code>NTLM</code> (default) and <code>KERBEROS</code> authentication.</p>
    /// <p>For more information, see <a href="https://docs.aws.amazon.com/datasync/latest/userguide/create-smb-location.html#configuring-smb-permissions">Providing DataSync access to SMB file servers</a>.</p>
    pub fn set_authentication_type(mut self, input: ::std::option::Option<crate::types::SmbAuthenticationType>) -> Self {
        self.inner = self.inner.set_authentication_type(input);
        self
    }
    /// <p>Specifies the authentication protocol that DataSync uses to connect to your SMB file server. DataSync supports <code>NTLM</code> (default) and <code>KERBEROS</code> authentication.</p>
    /// <p>For more information, see <a href="https://docs.aws.amazon.com/datasync/latest/userguide/create-smb-location.html#configuring-smb-permissions">Providing DataSync access to SMB file servers</a>.</p>
    pub fn get_authentication_type(&self) -> &::std::option::Option<crate::types::SmbAuthenticationType> {
        self.inner.get_authentication_type()
    }
    ///
    /// Appends an item to `DnsIpAddresses`.
    ///
    /// To override the contents of this collection use [`set_dns_ip_addresses`](Self::set_dns_ip_addresses).
    ///
    /// <p>Specifies the IPv4 or IPv6 addresses for the DNS servers that your SMB file server belongs to. This parameter applies only if <code>AuthenticationType</code> is set to <code>KERBEROS</code>.</p>
    /// <p>If you have multiple domains in your environment, configuring this parameter makes sure that DataSync connects to the right SMB file server.</p>
    pub fn dns_ip_addresses(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
        self.inner = self.inner.dns_ip_addresses(input.into());
        self
    }
    /// <p>Specifies the IPv4 or IPv6 addresses for the DNS servers that your SMB file server belongs to. This parameter applies only if <code>AuthenticationType</code> is set to <code>KERBEROS</code>.</p>
    /// <p>If you have multiple domains in your environment, configuring this parameter makes sure that DataSync connects to the right SMB file server.</p>
    pub fn set_dns_ip_addresses(mut self, input: ::std::option::Option<::std::vec::Vec<::std::string::String>>) -> Self {
        self.inner = self.inner.set_dns_ip_addresses(input);
        self
    }
    /// <p>Specifies the IPv4 or IPv6 addresses for the DNS servers that your SMB file server belongs to. This parameter applies only if <code>AuthenticationType</code> is set to <code>KERBEROS</code>.</p>
    /// <p>If you have multiple domains in your environment, configuring this parameter makes sure that DataSync connects to the right SMB file server.</p>
    pub fn get_dns_ip_addresses(&self) -> &::std::option::Option<::std::vec::Vec<::std::string::String>> {
        self.inner.get_dns_ip_addresses()
    }
    /// <p>Specifies a Kerberos principal, which is an identity in your Kerberos realm that has permission to access the files, folders, and file metadata in your SMB file server.</p>
    /// <p>A Kerberos principal might look like <code>HOST/kerberosuser@MYDOMAIN.ORG</code>.</p>
    /// <p>Principal names are case sensitive. Your DataSync task execution will fail if the principal that you specify for this parameter doesn’t exactly match the principal that you use to create the keytab file.</p>
    pub fn kerberos_principal(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
        self.inner = self.inner.kerberos_principal(input.into());
        self
    }
    /// <p>Specifies a Kerberos principal, which is an identity in your Kerberos realm that has permission to access the files, folders, and file metadata in your SMB file server.</p>
    /// <p>A Kerberos principal might look like <code>HOST/kerberosuser@MYDOMAIN.ORG</code>.</p>
    /// <p>Principal names are case sensitive. Your DataSync task execution will fail if the principal that you specify for this parameter doesn’t exactly match the principal that you use to create the keytab file.</p>
    pub fn set_kerberos_principal(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
        self.inner = self.inner.set_kerberos_principal(input);
        self
    }
    /// <p>Specifies a Kerberos principal, which is an identity in your Kerberos realm that has permission to access the files, folders, and file metadata in your SMB file server.</p>
    /// <p>A Kerberos principal might look like <code>HOST/kerberosuser@MYDOMAIN.ORG</code>.</p>
    /// <p>Principal names are case sensitive. Your DataSync task execution will fail if the principal that you specify for this parameter doesn’t exactly match the principal that you use to create the keytab file.</p>
    pub fn get_kerberos_principal(&self) -> &::std::option::Option<::std::string::String> {
        self.inner.get_kerberos_principal()
    }
    /// <p>Specifies your Kerberos key table (keytab) file, which includes mappings between your Kerberos principal and encryption keys.</p>
    /// <p>To avoid task execution errors, make sure that the Kerberos principal that you use to create the keytab file matches exactly what you specify for <code>KerberosPrincipal</code>.</p>
    pub fn kerberos_keytab(mut self, input: ::aws_smithy_types::Blob) -> Self {
        self.inner = self.inner.kerberos_keytab(input);
        self
    }
    /// <p>Specifies your Kerberos key table (keytab) file, which includes mappings between your Kerberos principal and encryption keys.</p>
    /// <p>To avoid task execution errors, make sure that the Kerberos principal that you use to create the keytab file matches exactly what you specify for <code>KerberosPrincipal</code>.</p>
    pub fn set_kerberos_keytab(mut self, input: ::std::option::Option<::aws_smithy_types::Blob>) -> Self {
        self.inner = self.inner.set_kerberos_keytab(input);
        self
    }
    /// <p>Specifies your Kerberos key table (keytab) file, which includes mappings between your Kerberos principal and encryption keys.</p>
    /// <p>To avoid task execution errors, make sure that the Kerberos principal that you use to create the keytab file matches exactly what you specify for <code>KerberosPrincipal</code>.</p>
    pub fn get_kerberos_keytab(&self) -> &::std::option::Option<::aws_smithy_types::Blob> {
        self.inner.get_kerberos_keytab()
    }
    /// <p>Specifies a Kerberos configuration file (<code>krb5.conf</code>) that defines your Kerberos realm configuration.</p>
    /// <p>The file must be base64 encoded. If you're using the CLI, the encoding is done for you.</p>
    pub fn kerberos_krb5_conf(mut self, input: ::aws_smithy_types::Blob) -> Self {
        self.inner = self.inner.kerberos_krb5_conf(input);
        self
    }
    /// <p>Specifies a Kerberos configuration file (<code>krb5.conf</code>) that defines your Kerberos realm configuration.</p>
    /// <p>The file must be base64 encoded. If you're using the CLI, the encoding is done for you.</p>
    pub fn set_kerberos_krb5_conf(mut self, input: ::std::option::Option<::aws_smithy_types::Blob>) -> Self {
        self.inner = self.inner.set_kerberos_krb5_conf(input);
        self
    }
    /// <p>Specifies a Kerberos configuration file (<code>krb5.conf</code>) that defines your Kerberos realm configuration.</p>
    /// <p>The file must be base64 encoded. If you're using the CLI, the encoding is done for you.</p>
    pub fn get_kerberos_krb5_conf(&self) -> &::std::option::Option<::aws_smithy_types::Blob> {
        self.inner.get_kerberos_krb5_conf()
    }
}