// Code generated by software.amazon.smithy.rust.codegen.smithy-rs. DO NOT EDIT.

impl DescribeObjectsInput {
    /// Consumes the builder and constructs an Operation<[`DescribeObjects`](crate::operation::describe_objects::DescribeObjects)>
    #[allow(unused_mut)]
    #[allow(clippy::let_and_return)]
    #[allow(clippy::needless_borrow)]
    pub async fn make_operation(
        &self,
        _config: &crate::config::Config,
    ) -> std::result::Result<
        aws_smithy_http::operation::Operation<
            crate::operation::describe_objects::DescribeObjects,
            aws_http::retry::AwsResponseRetryClassifier,
        >,
        aws_smithy_http::operation::error::BuildError,
    > {
        let params_result = crate::endpoint::Params::builder()
            .set_region(_config.region.as_ref().map(|r| r.as_ref().to_owned()))
            .set_use_dual_stack(_config.use_dual_stack)
            .set_use_fips(_config.use_fips)
            .set_endpoint(_config.endpoint_url.clone())
            .build()
            .map_err(|err| {
                aws_smithy_http::endpoint::ResolveEndpointError::from_source(
                    "could not construct endpoint parameters",
                    err,
                )
            });
        let (endpoint_result, params) = match params_result {
            Ok(params) => (
                _config.endpoint_resolver.resolve_endpoint(&params),
                Some(params),
            ),
            Err(e) => (Err(e), None),
        };
        let mut request = {
            fn uri_base(
                _input: &crate::operation::describe_objects::DescribeObjectsInput,
                output: &mut String,
            ) -> std::result::Result<(), aws_smithy_http::operation::error::BuildError>
            {
                use std::fmt::Write as _;
                write!(output, "/").expect("formatting should succeed");
                Ok(())
            }
            #[allow(clippy::unnecessary_wraps)]
            fn update_http_builder(
                input: &crate::operation::describe_objects::DescribeObjectsInput,
                builder: http::request::Builder,
            ) -> std::result::Result<
                http::request::Builder,
                aws_smithy_http::operation::error::BuildError,
            > {
                let mut uri = String::new();
                uri_base(input, &mut uri)?;
                Ok(builder.method("POST").uri(uri))
            }
            let mut builder = update_http_builder(&self, http::request::Builder::new())?;
            builder = aws_smithy_http::header::set_request_header_if_absent(
                builder,
                http::header::CONTENT_TYPE,
                "application/x-amz-json-1.1",
            );
            builder = aws_smithy_http::header::set_request_header_if_absent(
                builder,
                http::header::HeaderName::from_static("x-amz-target"),
                "DataPipeline.DescribeObjects",
            );
            builder
        };
        let mut properties = aws_smithy_http::property_bag::SharedPropertyBag::new();
        #[allow(clippy::useless_conversion)]
        let body = aws_smithy_http::body::SdkBody::from(
            crate::protocol_serde::shape_describe_objects::ser_describe_objects_input(&self)?,
        );
        if let Some(content_length) = body.content_length() {
            request = aws_smithy_http::header::set_request_header_if_absent(
                request,
                http::header::CONTENT_LENGTH,
                content_length,
            );
        }
        let request = request.body(body).expect("should be valid request");
        let mut request = aws_smithy_http::operation::Request::from_parts(request, properties);
        request.properties_mut().insert(endpoint_result);
        if let Some(params) = params {
            request.properties_mut().insert(params);
        }
        request
            .properties_mut()
            .insert(aws_smithy_http::http_versions::DEFAULT_HTTP_VERSION_LIST.clone());
        let mut user_agent = aws_http::user_agent::AwsUserAgent::new_from_environment(
            aws_types::os_shim_internal::Env::real(),
            crate::meta::API_METADATA.clone(),
        );
        if let Some(app_name) = _config.app_name() {
            user_agent = user_agent.with_app_name(app_name.clone());
        }
        request.properties_mut().insert(user_agent);
        let mut signing_config = aws_sig_auth::signer::OperationSigningConfig::default_config();
        request.properties_mut().insert(signing_config);
        request
            .properties_mut()
            .insert(aws_types::SigningService::from_static(
                _config.signing_service(),
            ));
        if let Some(region) = &_config.region {
            request
                .properties_mut()
                .insert(aws_types::region::SigningRegion::from(region.clone()));
        }
        if let Some(region) = &_config.region {
            request.properties_mut().insert(region.clone());
        }
        aws_http::auth::set_credentials_cache(
            &mut request.properties_mut(),
            _config.credentials_cache.clone(),
        );
        let op = aws_smithy_http::operation::Operation::new(
            request,
            crate::operation::describe_objects::DescribeObjects::new(),
        )
        .with_metadata(aws_smithy_http::operation::Metadata::new(
            "DescribeObjects",
            "datapipeline",
        ));
        let op = op.with_retry_classifier(aws_http::retry::AwsResponseRetryClassifier::new());
        Ok(op)
    }
}
/// `ParseStrictResponse` impl for `DescribeObjects`.
#[derive(std::clone::Clone, std::default::Default, std::fmt::Debug)]
#[non_exhaustive]
#[doc(hidden)]
pub struct DescribeObjects;
impl DescribeObjects {
    #[doc(hidden)]
    pub fn new() -> Self {
        Self
    }
}
impl aws_smithy_http::response::ParseStrictResponse for DescribeObjects {
    type Output = std::result::Result<
        crate::operation::describe_objects::DescribeObjectsOutput,
        crate::operation::describe_objects::DescribeObjectsError,
    >;
    fn parse(&self, response: &http::Response<bytes::Bytes>) -> Self::Output {
        let (success, status) = (response.status().is_success(), response.status().as_u16());
        let headers = response.headers();
        let body = response.body().as_ref();
        tracing::debug!(request_id = ?aws_http::request_id::RequestId::request_id(response));
        if !success && status != 200 {
            crate::protocol_serde::shape_describe_objects::de_describe_objects_http_error(
                status, headers, body,
            )
        } else {
            crate::protocol_serde::shape_describe_objects::de_describe_objects_http_response(
                status, headers, body,
            )
        }
    }
}

/// Do not use this.
///
/// Operation `*Error/*ErrorKind` types were combined into a single `*Error` enum. The `.kind` field on `*Error` no longer exists and isn't needed anymore (you can just match on the error directly since it's an enum now).
#[deprecated(
    note = "Operation `*Error/*ErrorKind` types were combined into a single `*Error` enum. The `.kind` field on `*Error` no longer exists and isn't needed anymore (you can just match on the error directly since it's an enum now)."
)]
pub type DescribeObjectsErrorKind = DescribeObjectsError;
/// Error type for the `DescribeObjectsError` operation.
#[non_exhaustive]
#[derive(std::fmt::Debug)]
pub enum DescribeObjectsError {
    /// <p>An internal service error occurred.</p>
    InternalServiceError(crate::types::error::InternalServiceError),
    /// <p>The request was not valid. Verify that your request was properly formatted, that the signature was generated with the correct credentials, and that you haven't exceeded any of the service limits for your account.</p>
    InvalidRequestException(crate::types::error::InvalidRequestException),
    /// <p>The specified pipeline has been deleted.</p>
    PipelineDeletedException(crate::types::error::PipelineDeletedException),
    /// <p>The specified pipeline was not found. Verify that you used the correct user and account identifiers.</p>
    PipelineNotFoundException(crate::types::error::PipelineNotFoundException),
    /// An unexpected error occurred (e.g., invalid JSON returned by the service or an unknown error code).
    Unhandled(aws_smithy_types::error::Unhandled),
}
impl aws_smithy_http::result::CreateUnhandledError for DescribeObjectsError {
    fn create_unhandled_error(
        source: Box<dyn std::error::Error + Send + Sync + 'static>,
        meta: std::option::Option<aws_smithy_types::error::ErrorMetadata>,
    ) -> Self {
        Self::Unhandled({
            let mut builder = aws_smithy_types::error::Unhandled::builder().source(source);
            builder.set_meta(meta);
            builder.build()
        })
    }
}
impl std::fmt::Display for DescribeObjectsError {
    fn fmt(&self, f: &mut std::fmt::Formatter<'_>) -> std::fmt::Result {
        match self {
            Self::InternalServiceError(_inner) => _inner.fmt(f),
            Self::InvalidRequestException(_inner) => _inner.fmt(f),
            Self::PipelineDeletedException(_inner) => _inner.fmt(f),
            Self::PipelineNotFoundException(_inner) => _inner.fmt(f),
            Self::Unhandled(_inner) => _inner.fmt(f),
        }
    }
}
impl aws_smithy_types::error::metadata::ProvideErrorMetadata for DescribeObjectsError {
    fn meta(&self) -> &aws_smithy_types::error::ErrorMetadata {
        match self {
            Self::InternalServiceError(_inner) => {
                aws_smithy_types::error::metadata::ProvideErrorMetadata::meta(_inner)
            }
            Self::InvalidRequestException(_inner) => {
                aws_smithy_types::error::metadata::ProvideErrorMetadata::meta(_inner)
            }
            Self::PipelineDeletedException(_inner) => {
                aws_smithy_types::error::metadata::ProvideErrorMetadata::meta(_inner)
            }
            Self::PipelineNotFoundException(_inner) => {
                aws_smithy_types::error::metadata::ProvideErrorMetadata::meta(_inner)
            }
            Self::Unhandled(_inner) => {
                aws_smithy_types::error::metadata::ProvideErrorMetadata::meta(_inner)
            }
        }
    }
}
impl aws_http::request_id::RequestId for crate::operation::describe_objects::DescribeObjectsError {
    fn request_id(&self) -> Option<&str> {
        self.meta().request_id()
    }
}
impl aws_smithy_types::retry::ProvideErrorKind for DescribeObjectsError {
    fn code(&self) -> std::option::Option<&str> {
        aws_smithy_types::error::metadata::ProvideErrorMetadata::code(self)
    }
    fn retryable_error_kind(&self) -> std::option::Option<aws_smithy_types::retry::ErrorKind> {
        None
    }
}
impl DescribeObjectsError {
    /// Creates the `DescribeObjectsError::Unhandled` variant from any error type.
    pub fn unhandled(err: impl Into<Box<dyn std::error::Error + Send + Sync + 'static>>) -> Self {
        Self::Unhandled(
            aws_smithy_types::error::Unhandled::builder()
                .source(err)
                .build(),
        )
    }

    /// Creates the `DescribeObjectsError::Unhandled` variant from a `aws_smithy_types::error::ErrorMetadata`.
    pub fn generic(err: aws_smithy_types::error::ErrorMetadata) -> Self {
        Self::Unhandled(
            aws_smithy_types::error::Unhandled::builder()
                .source(err.clone())
                .meta(err)
                .build(),
        )
    }
    ///
    /// Returns error metadata, which includes the error code, message,
    /// request ID, and potentially additional information.
    ///
    pub fn meta(&self) -> &aws_smithy_types::error::ErrorMetadata {
        use aws_smithy_types::error::metadata::ProvideErrorMetadata;
        match self {
            Self::InternalServiceError(e) => e.meta(),
            Self::InvalidRequestException(e) => e.meta(),
            Self::PipelineDeletedException(e) => e.meta(),
            Self::PipelineNotFoundException(e) => e.meta(),
            Self::Unhandled(e) => e.meta(),
        }
    }
    /// Returns `true` if the error kind is `DescribeObjectsError::InternalServiceError`.
    pub fn is_internal_service_error(&self) -> bool {
        matches!(self, Self::InternalServiceError(_))
    }
    /// Returns `true` if the error kind is `DescribeObjectsError::InvalidRequestException`.
    pub fn is_invalid_request_exception(&self) -> bool {
        matches!(self, Self::InvalidRequestException(_))
    }
    /// Returns `true` if the error kind is `DescribeObjectsError::PipelineDeletedException`.
    pub fn is_pipeline_deleted_exception(&self) -> bool {
        matches!(self, Self::PipelineDeletedException(_))
    }
    /// Returns `true` if the error kind is `DescribeObjectsError::PipelineNotFoundException`.
    pub fn is_pipeline_not_found_exception(&self) -> bool {
        matches!(self, Self::PipelineNotFoundException(_))
    }
}
impl std::error::Error for DescribeObjectsError {
    fn source(&self) -> std::option::Option<&(dyn std::error::Error + 'static)> {
        match self {
            Self::InternalServiceError(_inner) => Some(_inner),
            Self::InvalidRequestException(_inner) => Some(_inner),
            Self::PipelineDeletedException(_inner) => Some(_inner),
            Self::PipelineNotFoundException(_inner) => Some(_inner),
            Self::Unhandled(_inner) => Some(_inner),
        }
    }
}

pub use crate::operation::describe_objects::_describe_objects_output::DescribeObjectsOutput;

pub use crate::operation::describe_objects::_describe_objects_input::DescribeObjectsInput;

mod _describe_objects_input;

mod _describe_objects_output;

/// Builders
pub mod builders;

/// Paginator for this operation
pub mod paginator;