// Code generated by software.amazon.smithy.rust.codegen.smithy-rs. DO NOT EDIT.
pub use crate::operation::update_recipe_job::_update_recipe_job_output::UpdateRecipeJobOutputBuilder;

pub use crate::operation::update_recipe_job::_update_recipe_job_input::UpdateRecipeJobInputBuilder;

/// Fluent builder constructing a request to `UpdateRecipeJob`.
///
/// <p>Modifies the definition of an existing DataBrew recipe job.</p>
#[derive(std::clone::Clone, std::fmt::Debug)]
pub struct UpdateRecipeJobFluentBuilder {
    handle: std::sync::Arc<crate::client::Handle>,
    inner: crate::operation::update_recipe_job::builders::UpdateRecipeJobInputBuilder,
}
impl UpdateRecipeJobFluentBuilder {
    /// Creates a new `UpdateRecipeJob`.
    pub(crate) fn new(handle: std::sync::Arc<crate::client::Handle>) -> Self {
        Self {
            handle,
            inner: Default::default(),
        }
    }

    /// Consume this builder, creating a customizable operation that can be modified before being
    /// sent. The operation's inner [http::Request] can be modified as well.
    pub async fn customize(
        self,
    ) -> std::result::Result<
        crate::client::customize::CustomizableOperation<
            crate::operation::update_recipe_job::UpdateRecipeJob,
            aws_http::retry::AwsResponseRetryClassifier,
        >,
        aws_smithy_http::result::SdkError<
            crate::operation::update_recipe_job::UpdateRecipeJobError,
        >,
    > {
        let handle = self.handle.clone();
        let operation = self
            .inner
            .build()
            .map_err(aws_smithy_http::result::SdkError::construction_failure)?
            .make_operation(&handle.conf)
            .await
            .map_err(aws_smithy_http::result::SdkError::construction_failure)?;
        Ok(crate::client::customize::CustomizableOperation { handle, operation })
    }

    /// Sends the request and returns the response.
    ///
    /// If an error occurs, an `SdkError` will be returned with additional details that
    /// can be matched against.
    ///
    /// By default, any retryable failures will be retried twice. Retry behavior
    /// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
    /// set when configuring the client.
    pub async fn send(
        self,
    ) -> std::result::Result<
        crate::operation::update_recipe_job::UpdateRecipeJobOutput,
        aws_smithy_http::result::SdkError<
            crate::operation::update_recipe_job::UpdateRecipeJobError,
        >,
    > {
        let op = self
            .inner
            .build()
            .map_err(aws_smithy_http::result::SdkError::construction_failure)?
            .make_operation(&self.handle.conf)
            .await
            .map_err(aws_smithy_http::result::SdkError::construction_failure)?;
        self.handle.client.call(op).await
    }
    /// <p>The Amazon Resource Name (ARN) of an encryption key that is used to protect the job.</p>
    pub fn encryption_key_arn(mut self, input: impl Into<std::string::String>) -> Self {
        self.inner = self.inner.encryption_key_arn(input.into());
        self
    }
    /// <p>The Amazon Resource Name (ARN) of an encryption key that is used to protect the job.</p>
    pub fn set_encryption_key_arn(
        mut self,
        input: std::option::Option<std::string::String>,
    ) -> Self {
        self.inner = self.inner.set_encryption_key_arn(input);
        self
    }
    /// <p>The encryption mode for the job, which can be one of the following:</p>
    /// <ul>
    /// <li> <p> <code>SSE-KMS</code> - Server-side encryption with keys managed by KMS.</p> </li>
    /// <li> <p> <code>SSE-S3</code> - Server-side encryption with keys managed by Amazon S3.</p> </li>
    /// </ul>
    pub fn encryption_mode(mut self, input: crate::types::EncryptionMode) -> Self {
        self.inner = self.inner.encryption_mode(input);
        self
    }
    /// <p>The encryption mode for the job, which can be one of the following:</p>
    /// <ul>
    /// <li> <p> <code>SSE-KMS</code> - Server-side encryption with keys managed by KMS.</p> </li>
    /// <li> <p> <code>SSE-S3</code> - Server-side encryption with keys managed by Amazon S3.</p> </li>
    /// </ul>
    pub fn set_encryption_mode(
        mut self,
        input: std::option::Option<crate::types::EncryptionMode>,
    ) -> Self {
        self.inner = self.inner.set_encryption_mode(input);
        self
    }
    /// <p>The name of the job to update.</p>
    pub fn name(mut self, input: impl Into<std::string::String>) -> Self {
        self.inner = self.inner.name(input.into());
        self
    }
    /// <p>The name of the job to update.</p>
    pub fn set_name(mut self, input: std::option::Option<std::string::String>) -> Self {
        self.inner = self.inner.set_name(input);
        self
    }
    /// <p>Enables or disables Amazon CloudWatch logging for the job. If logging is enabled, CloudWatch writes one log stream for each job run.</p>
    pub fn log_subscription(mut self, input: crate::types::LogSubscription) -> Self {
        self.inner = self.inner.log_subscription(input);
        self
    }
    /// <p>Enables or disables Amazon CloudWatch logging for the job. If logging is enabled, CloudWatch writes one log stream for each job run.</p>
    pub fn set_log_subscription(
        mut self,
        input: std::option::Option<crate::types::LogSubscription>,
    ) -> Self {
        self.inner = self.inner.set_log_subscription(input);
        self
    }
    /// <p>The maximum number of nodes that DataBrew can consume when the job processes data.</p>
    pub fn max_capacity(mut self, input: i32) -> Self {
        self.inner = self.inner.max_capacity(input);
        self
    }
    /// <p>The maximum number of nodes that DataBrew can consume when the job processes data.</p>
    pub fn set_max_capacity(mut self, input: std::option::Option<i32>) -> Self {
        self.inner = self.inner.set_max_capacity(input);
        self
    }
    /// <p>The maximum number of times to retry the job after a job run fails.</p>
    pub fn max_retries(mut self, input: i32) -> Self {
        self.inner = self.inner.max_retries(input);
        self
    }
    /// <p>The maximum number of times to retry the job after a job run fails.</p>
    pub fn set_max_retries(mut self, input: std::option::Option<i32>) -> Self {
        self.inner = self.inner.set_max_retries(input);
        self
    }
    /// Appends an item to `Outputs`.
    ///
    /// To override the contents of this collection use [`set_outputs`](Self::set_outputs).
    ///
    /// <p>One or more artifacts that represent the output from running the job. </p>
    pub fn outputs(mut self, input: crate::types::Output) -> Self {
        self.inner = self.inner.outputs(input);
        self
    }
    /// <p>One or more artifacts that represent the output from running the job. </p>
    pub fn set_outputs(
        mut self,
        input: std::option::Option<std::vec::Vec<crate::types::Output>>,
    ) -> Self {
        self.inner = self.inner.set_outputs(input);
        self
    }
    /// Appends an item to `DataCatalogOutputs`.
    ///
    /// To override the contents of this collection use [`set_data_catalog_outputs`](Self::set_data_catalog_outputs).
    ///
    /// <p>One or more artifacts that represent the Glue Data Catalog output from running the job.</p>
    pub fn data_catalog_outputs(mut self, input: crate::types::DataCatalogOutput) -> Self {
        self.inner = self.inner.data_catalog_outputs(input);
        self
    }
    /// <p>One or more artifacts that represent the Glue Data Catalog output from running the job.</p>
    pub fn set_data_catalog_outputs(
        mut self,
        input: std::option::Option<std::vec::Vec<crate::types::DataCatalogOutput>>,
    ) -> Self {
        self.inner = self.inner.set_data_catalog_outputs(input);
        self
    }
    /// Appends an item to `DatabaseOutputs`.
    ///
    /// To override the contents of this collection use [`set_database_outputs`](Self::set_database_outputs).
    ///
    /// <p>Represents a list of JDBC database output objects which defines the output destination for a DataBrew recipe job to write into.</p>
    pub fn database_outputs(mut self, input: crate::types::DatabaseOutput) -> Self {
        self.inner = self.inner.database_outputs(input);
        self
    }
    /// <p>Represents a list of JDBC database output objects which defines the output destination for a DataBrew recipe job to write into.</p>
    pub fn set_database_outputs(
        mut self,
        input: std::option::Option<std::vec::Vec<crate::types::DatabaseOutput>>,
    ) -> Self {
        self.inner = self.inner.set_database_outputs(input);
        self
    }
    /// <p>The Amazon Resource Name (ARN) of the Identity and Access Management (IAM) role to be assumed when DataBrew runs the job.</p>
    pub fn role_arn(mut self, input: impl Into<std::string::String>) -> Self {
        self.inner = self.inner.role_arn(input.into());
        self
    }
    /// <p>The Amazon Resource Name (ARN) of the Identity and Access Management (IAM) role to be assumed when DataBrew runs the job.</p>
    pub fn set_role_arn(mut self, input: std::option::Option<std::string::String>) -> Self {
        self.inner = self.inner.set_role_arn(input);
        self
    }
    /// <p>The job's timeout in minutes. A job that attempts to run longer than this timeout period ends with a status of <code>TIMEOUT</code>.</p>
    pub fn timeout(mut self, input: i32) -> Self {
        self.inner = self.inner.timeout(input);
        self
    }
    /// <p>The job's timeout in minutes. A job that attempts to run longer than this timeout period ends with a status of <code>TIMEOUT</code>.</p>
    pub fn set_timeout(mut self, input: std::option::Option<i32>) -> Self {
        self.inner = self.inner.set_timeout(input);
        self
    }
}