Struct aws_sdk_connect::operation::start_chat_contact::builders::StartChatContactFluentBuilder

pub struct StartChatContactFluentBuilder { /* private fields */ }

Fluent builder constructing a request to StartChatContact.

Initiates a flow to start a new chat for the customer. Response of this API provides a token required to obtain credentials from the CreateParticipantConnection API in the Amazon Connect Participant Service.

When a new chat contact is successfully created, clients must subscribe to the participant’s connection for the created chat within 5 minutes. This is achieved by invoking CreateParticipantConnection with WEBSOCKET and CONNECTION_CREDENTIALS.

A 429 error occurs in the following situations:

• API rate limit is exceeded. API TPS throttling returns a TooManyRequests exception.

• The quota for concurrent active chats is exceeded. Active chat throttling returns a LimitExceededException.

If you use the ChatDurationInMinutes parameter and receive a 400 error, your account may not support the ability to configure custom chat durations. For more information, contact Amazon Web Services Support.

For more information about chat, see Chat in the Amazon Connect Administrator Guide.

Implementations

impl StartChatContactFluentBuilder

pub fn as_input(&self) -> &StartChatContactInputBuilder

Access the StartChatContact as a reference.

pub async fn send( self ) -> Result<StartChatContactOutput, SdkError<StartChatContactError, HttpResponse>>

Sends the request and returns the response.

If an error occurs, an SdkError will be returned with additional details that can be matched against.

By default, any retryable failures will be retried twice. Retry behavior is configurable with the RetryConfig, which can be set when configuring the client.

pub fn customize( self ) -> CustomizableOperation<StartChatContactOutput, StartChatContactError, Self>

Consumes this builder, creating a customizable operation that can be modified before being sent.

pub fn instance_id(self, input: impl Into<String>) -> Self

The identifier of the Amazon Connect instance. You can find the instance ID in the Amazon Resource Name (ARN) of the instance.

pub fn set_instance_id(self, input: Option<String>) -> Self

The identifier of the Amazon Connect instance. You can find the instance ID in the Amazon Resource Name (ARN) of the instance.

pub fn get_instance_id(&self) -> &Option<String>

The identifier of the Amazon Connect instance. You can find the instance ID in the Amazon Resource Name (ARN) of the instance.

pub fn contact_flow_id(self, input: impl Into<String>) -> Self

The identifier of the flow for initiating the chat. To see the ContactFlowId in the Amazon Connect admin website, on the navigation menu go to Routing, Contact Flows. Choose the flow. On the flow page, under the name of the flow, choose Show additional flow information. The ContactFlowId is the last part of the ARN, shown here in bold:

arn:aws:connect:us-west-2:xxxxxxxxxxxx:instance/xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx/contact-flow/846ec553-a005-41c0-8341-xxxxxxxxxxxx

pub fn set_contact_flow_id(self, input: Option<String>) -> Self

The identifier of the flow for initiating the chat. To see the ContactFlowId in the Amazon Connect admin website, on the navigation menu go to Routing, Contact Flows. Choose the flow. On the flow page, under the name of the flow, choose Show additional flow information. The ContactFlowId is the last part of the ARN, shown here in bold:

arn:aws:connect:us-west-2:xxxxxxxxxxxx:instance/xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx/contact-flow/846ec553-a005-41c0-8341-xxxxxxxxxxxx

pub fn get_contact_flow_id(&self) -> &Option<String>

The identifier of the flow for initiating the chat. To see the ContactFlowId in the Amazon Connect admin website, on the navigation menu go to Routing, Contact Flows. Choose the flow. On the flow page, under the name of the flow, choose Show additional flow information. The ContactFlowId is the last part of the ARN, shown here in bold:

arn:aws:connect:us-west-2:xxxxxxxxxxxx:instance/xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx/contact-flow/846ec553-a005-41c0-8341-xxxxxxxxxxxx

pub fn attributes(self, k: impl Into<String>, v: impl Into<String>) -> Self

Adds a key-value pair to Attributes.

To override the contents of this collection use set_attributes.

A custom key-value pair using an attribute map. The attributes are standard Amazon Connect attributes. They can be accessed in flows just like any other contact attributes.

There can be up to 32,768 UTF-8 bytes across all key-value pairs per contact. Attribute keys can include only alphanumeric, dash, and underscore characters.

pub fn set_attributes(self, input: Option<HashMap<String, String>>) -> Self

A custom key-value pair using an attribute map. The attributes are standard Amazon Connect attributes. They can be accessed in flows just like any other contact attributes.

There can be up to 32,768 UTF-8 bytes across all key-value pairs per contact. Attribute keys can include only alphanumeric, dash, and underscore characters.

pub fn get_attributes(&self) -> &Option<HashMap<String, String>>

A custom key-value pair using an attribute map. The attributes are standard Amazon Connect attributes. They can be accessed in flows just like any other contact attributes.

There can be up to 32,768 UTF-8 bytes across all key-value pairs per contact. Attribute keys can include only alphanumeric, dash, and underscore characters.

pub fn participant_details(self, input: ParticipantDetails) -> Self

Information identifying the participant.

pub fn set_participant_details(self, input: Option<ParticipantDetails>) -> Self

Information identifying the participant.

pub fn get_participant_details(&self) -> &Option<ParticipantDetails>

Information identifying the participant.

pub fn initial_message(self, input: ChatMessage) -> Self

The initial message to be sent to the newly created chat.

pub fn set_initial_message(self, input: Option<ChatMessage>) -> Self

The initial message to be sent to the newly created chat.

pub fn get_initial_message(&self) -> &Option<ChatMessage>

The initial message to be sent to the newly created chat.

pub fn client_token(self, input: impl Into<String>) -> Self

A unique, case-sensitive identifier that you provide to ensure the idempotency of the request. If not provided, the Amazon Web Services SDK populates this field. For more information about idempotency, see Making retries safe with idempotent APIs.

pub fn set_client_token(self, input: Option<String>) -> Self

A unique, case-sensitive identifier that you provide to ensure the idempotency of the request. If not provided, the Amazon Web Services SDK populates this field. For more information about idempotency, see Making retries safe with idempotent APIs.

pub fn get_client_token(&self) -> &Option<String>

A unique, case-sensitive identifier that you provide to ensure the idempotency of the request. If not provided, the Amazon Web Services SDK populates this field. For more information about idempotency, see Making retries safe with idempotent APIs.

pub fn chat_duration_in_minutes(self, input: i32) -> Self

The total duration of the newly started chat session. If not specified, the chat session duration defaults to 25 hour. The minimum configurable time is 60 minutes. The maximum configurable time is 10,080 minutes (7 days).

pub fn set_chat_duration_in_minutes(self, input: Option<i32>) -> Self

The total duration of the newly started chat session. If not specified, the chat session duration defaults to 25 hour. The minimum configurable time is 60 minutes. The maximum configurable time is 10,080 minutes (7 days).

pub fn get_chat_duration_in_minutes(&self) -> &Option<i32>

The total duration of the newly started chat session. If not specified, the chat session duration defaults to 25 hour. The minimum configurable time is 60 minutes. The maximum configurable time is 10,080 minutes (7 days).

pub fn supported_messaging_content_types(self, input: impl Into<String>) -> Self

Appends an item to SupportedMessagingContentTypes.

To override the contents of this collection use set_supported_messaging_content_types.

The supported chat message content types. Supported types are text/plain, text/markdown, application/json, application/vnd.amazonaws.connect.message.interactive, and application/vnd.amazonaws.connect.message.interactive.response.

Content types must always contain text/plain. You can then put any other supported type in the list. For example, all the following lists are valid because they contain text/plain: [text/plain, text/markdown, application/json], [text/markdown, text/plain], [text/plain, application/json, application/vnd.amazonaws.connect.message.interactive.response].

The type application/vnd.amazonaws.connect.message.interactive is required to use the Show view flow block.

pub fn set_supported_messaging_content_types( self, input: Option<Vec<String>> ) -> Self

The supported chat message content types. Supported types are text/plain, text/markdown, application/json, application/vnd.amazonaws.connect.message.interactive, and application/vnd.amazonaws.connect.message.interactive.response.

Content types must always contain text/plain. You can then put any other supported type in the list. For example, all the following lists are valid because they contain text/plain: [text/plain, text/markdown, application/json], [text/markdown, text/plain], [text/plain, application/json, application/vnd.amazonaws.connect.message.interactive.response].

The type application/vnd.amazonaws.connect.message.interactive is required to use the Show view flow block.

pub fn get_supported_messaging_content_types(&self) -> &Option<Vec<String>>

The supported chat message content types. Supported types are text/plain, text/markdown, application/json, application/vnd.amazonaws.connect.message.interactive, and application/vnd.amazonaws.connect.message.interactive.response.

Content types must always contain text/plain. You can then put any other supported type in the list. For example, all the following lists are valid because they contain text/plain: [text/plain, text/markdown, application/json], [text/markdown, text/plain], [text/plain, application/json, application/vnd.amazonaws.connect.message.interactive.response].

The type application/vnd.amazonaws.connect.message.interactive is required to use the Show view flow block.

pub fn persistent_chat(self, input: PersistentChat) -> Self

Enable persistent chats. For more information about enabling persistent chat, and for example use cases and how to configure for them, see Enable persistent chat.

pub fn set_persistent_chat(self, input: Option<PersistentChat>) -> Self

Enable persistent chats. For more information about enabling persistent chat, and for example use cases and how to configure for them, see Enable persistent chat.

pub fn get_persistent_chat(&self) -> &Option<PersistentChat>

Enable persistent chats. For more information about enabling persistent chat, and for example use cases and how to configure for them, see Enable persistent chat.

pub fn related_contact_id(self, input: impl Into<String>) -> Self

The unique identifier for an Amazon Connect contact. This identifier is related to the chat starting.

You cannot provide data for both RelatedContactId and PersistentChat.

pub fn set_related_contact_id(self, input: Option<String>) -> Self

The unique identifier for an Amazon Connect contact. This identifier is related to the chat starting.

You cannot provide data for both RelatedContactId and PersistentChat.

pub fn get_related_contact_id(&self) -> &Option<String>

The unique identifier for an Amazon Connect contact. This identifier is related to the chat starting.

You cannot provide data for both RelatedContactId and PersistentChat.

pub fn segment_attributes( self, k: impl Into<String>, v: SegmentAttributeValue ) -> Self

Adds a key-value pair to SegmentAttributes.

To override the contents of this collection use set_segment_attributes.

A set of system defined key-value pairs stored on individual contact segments using an attribute map. The attributes are standard Amazon Connect attributes. They can be accessed in flows.

Attribute keys can include only alphanumeric, -, and _.

This field can be used to show channel subtype, such as connect:Guide.

The types application/vnd.amazonaws.connect.message.interactive and application/vnd.amazonaws.connect.message.interactive.response must be present in the SupportedMessagingContentTypes field of this API in order to set SegmentAttributes as { "connect:Subtype": {"valueString" : "connect:Guide" }}.

pub fn set_segment_attributes( self, input: Option<HashMap<String, SegmentAttributeValue>> ) -> Self

A set of system defined key-value pairs stored on individual contact segments using an attribute map. The attributes are standard Amazon Connect attributes. They can be accessed in flows.

Attribute keys can include only alphanumeric, -, and _.

This field can be used to show channel subtype, such as connect:Guide.

The types application/vnd.amazonaws.connect.message.interactive and application/vnd.amazonaws.connect.message.interactive.response must be present in the SupportedMessagingContentTypes field of this API in order to set SegmentAttributes as { "connect:Subtype": {"valueString" : "connect:Guide" }}.

pub fn get_segment_attributes( &self ) -> &Option<HashMap<String, SegmentAttributeValue>>

A set of system defined key-value pairs stored on individual contact segments using an attribute map. The attributes are standard Amazon Connect attributes. They can be accessed in flows.

Attribute keys can include only alphanumeric, -, and _.

This field can be used to show channel subtype, such as connect:Guide.

The types application/vnd.amazonaws.connect.message.interactive and application/vnd.amazonaws.connect.message.interactive.response must be present in the SupportedMessagingContentTypes field of this API in order to set SegmentAttributes as { "connect:Subtype": {"valueString" : "connect:Guide" }}.

Trait Implementations

impl Clone for StartChatContactFluentBuilder

fn clone(&self) -> StartChatContactFluentBuilder

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for StartChatContactFluentBuilder

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.