aws_sdk_codecommit/operation/
update_pull_request_status.rs

1// Code generated by software.amazon.smithy.rust.codegen.smithy-rs. DO NOT EDIT.
2/// Orchestration and serialization glue logic for `UpdatePullRequestStatus`.
3#[derive(::std::clone::Clone, ::std::default::Default, ::std::fmt::Debug)]
4#[non_exhaustive]
5pub struct UpdatePullRequestStatus;
6impl UpdatePullRequestStatus {
7    /// Creates a new `UpdatePullRequestStatus`
8    pub fn new() -> Self {
9        Self
10    }
11    pub(crate) async fn orchestrate(
12        runtime_plugins: &::aws_smithy_runtime_api::client::runtime_plugin::RuntimePlugins,
13        input: crate::operation::update_pull_request_status::UpdatePullRequestStatusInput,
14    ) -> ::std::result::Result<
15        crate::operation::update_pull_request_status::UpdatePullRequestStatusOutput,
16        ::aws_smithy_runtime_api::client::result::SdkError<
17            crate::operation::update_pull_request_status::UpdatePullRequestStatusError,
18            ::aws_smithy_runtime_api::client::orchestrator::HttpResponse,
19        >,
20    > {
21        let map_err = |err: ::aws_smithy_runtime_api::client::result::SdkError<
22            ::aws_smithy_runtime_api::client::interceptors::context::Error,
23            ::aws_smithy_runtime_api::client::orchestrator::HttpResponse,
24        >| {
25            err.map_service_error(|err| {
26                err.downcast::<crate::operation::update_pull_request_status::UpdatePullRequestStatusError>()
27                    .expect("correct error type")
28            })
29        };
30        let context = Self::orchestrate_with_stop_point(runtime_plugins, input, ::aws_smithy_runtime::client::orchestrator::StopPoint::None)
31            .await
32            .map_err(map_err)?;
33        let output = context.finalize().map_err(map_err)?;
34        ::std::result::Result::Ok(
35            output
36                .downcast::<crate::operation::update_pull_request_status::UpdatePullRequestStatusOutput>()
37                .expect("correct output type"),
38        )
39    }
40
41    pub(crate) async fn orchestrate_with_stop_point(
42        runtime_plugins: &::aws_smithy_runtime_api::client::runtime_plugin::RuntimePlugins,
43        input: crate::operation::update_pull_request_status::UpdatePullRequestStatusInput,
44        stop_point: ::aws_smithy_runtime::client::orchestrator::StopPoint,
45    ) -> ::std::result::Result<
46        ::aws_smithy_runtime_api::client::interceptors::context::InterceptorContext,
47        ::aws_smithy_runtime_api::client::result::SdkError<
48            ::aws_smithy_runtime_api::client::interceptors::context::Error,
49            ::aws_smithy_runtime_api::client::orchestrator::HttpResponse,
50        >,
51    > {
52        let input = ::aws_smithy_runtime_api::client::interceptors::context::Input::erase(input);
53        use ::tracing::Instrument;
54        ::aws_smithy_runtime::client::orchestrator::invoke_with_stop_point(
55            "CodeCommit",
56            "UpdatePullRequestStatus",
57            input,
58            runtime_plugins,
59            stop_point,
60        )
61        // Create a parent span for the entire operation. Includes a random, internal-only,
62        // seven-digit ID for the operation orchestration so that it can be correlated in the logs.
63        .instrument(::tracing::debug_span!(
64            "CodeCommit.UpdatePullRequestStatus",
65            "rpc.service" = "CodeCommit",
66            "rpc.method" = "UpdatePullRequestStatus",
67            "sdk_invocation_id" = ::fastrand::u32(1_000_000..10_000_000),
68            "rpc.system" = "aws-api",
69        ))
70        .await
71    }
72
73    pub(crate) fn operation_runtime_plugins(
74        client_runtime_plugins: ::aws_smithy_runtime_api::client::runtime_plugin::RuntimePlugins,
75        client_config: &crate::config::Config,
76        config_override: ::std::option::Option<crate::config::Builder>,
77    ) -> ::aws_smithy_runtime_api::client::runtime_plugin::RuntimePlugins {
78        let mut runtime_plugins = client_runtime_plugins.with_operation_plugin(Self::new());
79
80        if let ::std::option::Option::Some(config_override) = config_override {
81            for plugin in config_override.runtime_plugins.iter().cloned() {
82                runtime_plugins = runtime_plugins.with_operation_plugin(plugin);
83            }
84            runtime_plugins = runtime_plugins.with_operation_plugin(crate::config::ConfigOverrideRuntimePlugin::new(
85                config_override,
86                client_config.config.clone(),
87                &client_config.runtime_components,
88            ));
89        }
90        runtime_plugins
91    }
92}
93impl ::aws_smithy_runtime_api::client::runtime_plugin::RuntimePlugin for UpdatePullRequestStatus {
94    fn config(&self) -> ::std::option::Option<::aws_smithy_types::config_bag::FrozenLayer> {
95        let mut cfg = ::aws_smithy_types::config_bag::Layer::new("UpdatePullRequestStatus");
96
97        cfg.store_put(::aws_smithy_runtime_api::client::ser_de::SharedRequestSerializer::new(
98            UpdatePullRequestStatusRequestSerializer,
99        ));
100        cfg.store_put(::aws_smithy_runtime_api::client::ser_de::SharedResponseDeserializer::new(
101            UpdatePullRequestStatusResponseDeserializer,
102        ));
103
104        cfg.store_put(::aws_smithy_runtime_api::client::auth::AuthSchemeOptionResolverParams::new(
105            crate::config::auth::Params::builder()
106                .operation_name("UpdatePullRequestStatus")
107                .build()
108                .expect("required fields set"),
109        ));
110
111        cfg.store_put(::aws_smithy_runtime_api::client::orchestrator::Metadata::new(
112            "UpdatePullRequestStatus",
113            "CodeCommit",
114        ));
115        let mut signing_options = ::aws_runtime::auth::SigningOptions::default();
116        signing_options.double_uri_encode = true;
117        signing_options.content_sha256_header = false;
118        signing_options.normalize_uri_path = true;
119        signing_options.payload_override = None;
120
121        cfg.store_put(::aws_runtime::auth::SigV4OperationSigningConfig {
122            signing_options,
123            ..::std::default::Default::default()
124        });
125
126        ::std::option::Option::Some(cfg.freeze())
127    }
128
129    fn runtime_components(
130        &self,
131        _: &::aws_smithy_runtime_api::client::runtime_components::RuntimeComponentsBuilder,
132    ) -> ::std::borrow::Cow<'_, ::aws_smithy_runtime_api::client::runtime_components::RuntimeComponentsBuilder> {
133        #[allow(unused_mut)]
134        let mut rcb = ::aws_smithy_runtime_api::client::runtime_components::RuntimeComponentsBuilder::new("UpdatePullRequestStatus")
135            .with_interceptor(::aws_smithy_runtime::client::stalled_stream_protection::StalledStreamProtectionInterceptor::default())
136            .with_interceptor(UpdatePullRequestStatusEndpointParamsInterceptor)
137            .with_retry_classifier(::aws_smithy_runtime::client::retries::classifiers::TransientErrorClassifier::<
138                crate::operation::update_pull_request_status::UpdatePullRequestStatusError,
139            >::new())
140            .with_retry_classifier(::aws_smithy_runtime::client::retries::classifiers::ModeledAsRetryableClassifier::<
141                crate::operation::update_pull_request_status::UpdatePullRequestStatusError,
142            >::new())
143            .with_retry_classifier(::aws_runtime::retries::classifiers::AwsErrorCodeClassifier::<
144                crate::operation::update_pull_request_status::UpdatePullRequestStatusError,
145            >::new());
146
147        ::std::borrow::Cow::Owned(rcb)
148    }
149}
150
151#[derive(Debug)]
152struct UpdatePullRequestStatusResponseDeserializer;
153impl ::aws_smithy_runtime_api::client::ser_de::DeserializeResponse for UpdatePullRequestStatusResponseDeserializer {
154    fn deserialize_nonstreaming(
155        &self,
156        response: &::aws_smithy_runtime_api::client::orchestrator::HttpResponse,
157    ) -> ::aws_smithy_runtime_api::client::interceptors::context::OutputOrError {
158        let (success, status) = (response.status().is_success(), response.status().as_u16());
159        let headers = response.headers();
160        let body = response.body().bytes().expect("body loaded");
161        #[allow(unused_mut)]
162        let mut force_error = false;
163        ::tracing::debug!(request_id = ?::aws_types::request_id::RequestId::request_id(response));
164        let parse_result = if !success && status != 200 || force_error {
165            crate::protocol_serde::shape_update_pull_request_status::de_update_pull_request_status_http_error(status, headers, body)
166        } else {
167            crate::protocol_serde::shape_update_pull_request_status::de_update_pull_request_status_http_response(status, headers, body)
168        };
169        crate::protocol_serde::type_erase_result(parse_result)
170    }
171}
172#[derive(Debug)]
173struct UpdatePullRequestStatusRequestSerializer;
174impl ::aws_smithy_runtime_api::client::ser_de::SerializeRequest for UpdatePullRequestStatusRequestSerializer {
175    #[allow(unused_mut, clippy::let_and_return, clippy::needless_borrow, clippy::useless_conversion)]
176    fn serialize_input(
177        &self,
178        input: ::aws_smithy_runtime_api::client::interceptors::context::Input,
179        _cfg: &mut ::aws_smithy_types::config_bag::ConfigBag,
180    ) -> ::std::result::Result<::aws_smithy_runtime_api::client::orchestrator::HttpRequest, ::aws_smithy_runtime_api::box_error::BoxError> {
181        let input = input
182            .downcast::<crate::operation::update_pull_request_status::UpdatePullRequestStatusInput>()
183            .expect("correct type");
184        let _header_serialization_settings = _cfg
185            .load::<crate::serialization_settings::HeaderSerializationSettings>()
186            .cloned()
187            .unwrap_or_default();
188        let mut request_builder = {
189            fn uri_base(
190                _input: &crate::operation::update_pull_request_status::UpdatePullRequestStatusInput,
191                output: &mut ::std::string::String,
192            ) -> ::std::result::Result<(), ::aws_smithy_types::error::operation::BuildError> {
193                use ::std::fmt::Write as _;
194                ::std::write!(output, "/").expect("formatting should succeed");
195                ::std::result::Result::Ok(())
196            }
197            #[allow(clippy::unnecessary_wraps)]
198            fn update_http_builder(
199                input: &crate::operation::update_pull_request_status::UpdatePullRequestStatusInput,
200                builder: ::http::request::Builder,
201            ) -> ::std::result::Result<::http::request::Builder, ::aws_smithy_types::error::operation::BuildError> {
202                let mut uri = ::std::string::String::new();
203                uri_base(input, &mut uri)?;
204                ::std::result::Result::Ok(builder.method("POST").uri(uri))
205            }
206            let mut builder = update_http_builder(&input, ::http::request::Builder::new())?;
207            builder = _header_serialization_settings.set_default_header(builder, ::http::header::CONTENT_TYPE, "application/x-amz-json-1.1");
208            builder = _header_serialization_settings.set_default_header(
209                builder,
210                ::http::header::HeaderName::from_static("x-amz-target"),
211                "CodeCommit_20150413.UpdatePullRequestStatus",
212            );
213            builder
214        };
215        let body = ::aws_smithy_types::body::SdkBody::from(
216            crate::protocol_serde::shape_update_pull_request_status::ser_update_pull_request_status_input(&input)?,
217        );
218        if let Some(content_length) = body.content_length() {
219            let content_length = content_length.to_string();
220            request_builder = _header_serialization_settings.set_default_header(request_builder, ::http::header::CONTENT_LENGTH, &content_length);
221        }
222        ::std::result::Result::Ok(request_builder.body(body).expect("valid request").try_into().unwrap())
223    }
224}
225#[derive(Debug)]
226struct UpdatePullRequestStatusEndpointParamsInterceptor;
227
228impl ::aws_smithy_runtime_api::client::interceptors::Intercept for UpdatePullRequestStatusEndpointParamsInterceptor {
229    fn name(&self) -> &'static str {
230        "UpdatePullRequestStatusEndpointParamsInterceptor"
231    }
232
233    fn read_before_execution(
234        &self,
235        context: &::aws_smithy_runtime_api::client::interceptors::context::BeforeSerializationInterceptorContextRef<
236            '_,
237            ::aws_smithy_runtime_api::client::interceptors::context::Input,
238            ::aws_smithy_runtime_api::client::interceptors::context::Output,
239            ::aws_smithy_runtime_api::client::interceptors::context::Error,
240        >,
241        cfg: &mut ::aws_smithy_types::config_bag::ConfigBag,
242    ) -> ::std::result::Result<(), ::aws_smithy_runtime_api::box_error::BoxError> {
243        let _input = context
244            .input()
245            .downcast_ref::<UpdatePullRequestStatusInput>()
246            .ok_or("failed to downcast to UpdatePullRequestStatusInput")?;
247
248        let params = crate::config::endpoint::Params::builder()
249            .set_region(cfg.load::<::aws_types::region::Region>().map(|r| r.as_ref().to_owned()))
250            .set_use_dual_stack(cfg.load::<::aws_types::endpoint_config::UseDualStack>().map(|ty| ty.0))
251            .set_use_fips(cfg.load::<::aws_types::endpoint_config::UseFips>().map(|ty| ty.0))
252            .set_endpoint(cfg.load::<::aws_types::endpoint_config::EndpointUrl>().map(|ty| ty.0.clone()))
253            .build()
254            .map_err(|err| {
255                ::aws_smithy_runtime_api::client::interceptors::error::ContextAttachedError::new("endpoint params could not be built", err)
256            })?;
257        cfg.interceptor_state()
258            .store_put(::aws_smithy_runtime_api::client::endpoint::EndpointResolverParams::new(params));
259        ::std::result::Result::Ok(())
260    }
261}
262
263// The get_* functions below are generated from JMESPath expressions in the
264// operationContextParams trait. They target the operation's input shape.
265
266/// Error type for the `UpdatePullRequestStatusError` operation.
267#[non_exhaustive]
268#[derive(::std::fmt::Debug)]
269pub enum UpdatePullRequestStatusError {
270    /// <p>An encryption integrity check failed.</p>
271    EncryptionIntegrityChecksFailedException(crate::types::error::EncryptionIntegrityChecksFailedException),
272    /// <p>An encryption key could not be accessed.</p>
273    EncryptionKeyAccessDeniedException(crate::types::error::EncryptionKeyAccessDeniedException),
274    /// <p>The encryption key is disabled.</p>
275    EncryptionKeyDisabledException(crate::types::error::EncryptionKeyDisabledException),
276    /// <p>No encryption key was found.</p>
277    EncryptionKeyNotFoundException(crate::types::error::EncryptionKeyNotFoundException),
278    /// <p>The encryption key is not available.</p>
279    EncryptionKeyUnavailableException(crate::types::error::EncryptionKeyUnavailableException),
280    /// <p>The pull request ID is not valid. Make sure that you have provided the full ID and that the pull request is in the specified repository, and then try again.</p>
281    InvalidPullRequestIdException(crate::types::error::InvalidPullRequestIdException),
282    /// <p>The pull request status is not valid. The only valid values are <code>OPEN</code> and <code>CLOSED</code>.</p>
283    InvalidPullRequestStatusException(crate::types::error::InvalidPullRequestStatusException),
284    /// <p>The pull request status update is not valid. The only valid update is from <code>OPEN</code> to <code>CLOSED</code>.</p>
285    InvalidPullRequestStatusUpdateException(crate::types::error::InvalidPullRequestStatusUpdateException),
286    /// <p>The pull request ID could not be found. Make sure that you have specified the correct repository name and pull request ID, and then try again.</p>
287    PullRequestDoesNotExistException(crate::types::error::PullRequestDoesNotExistException),
288    /// <p>A pull request ID is required, but none was provided.</p>
289    PullRequestIdRequiredException(crate::types::error::PullRequestIdRequiredException),
290    /// <p>A pull request status is required, but none was provided.</p>
291    PullRequestStatusRequiredException(crate::types::error::PullRequestStatusRequiredException),
292    /// An unexpected error occurred (e.g., invalid JSON returned by the service or an unknown error code).
293    #[deprecated(note = "Matching `Unhandled` directly is not forwards compatible. Instead, match using a \
294    variable wildcard pattern and check `.code()`:
295     \
296    &nbsp;&nbsp;&nbsp;`err if err.code() == Some(\"SpecificExceptionCode\") => { /* handle the error */ }`
297     \
298    See [`ProvideErrorMetadata`](#impl-ProvideErrorMetadata-for-UpdatePullRequestStatusError) for what information is available for the error.")]
299    Unhandled(crate::error::sealed_unhandled::Unhandled),
300}
301impl UpdatePullRequestStatusError {
302    /// Creates the `UpdatePullRequestStatusError::Unhandled` variant from any error type.
303    pub fn unhandled(
304        err: impl ::std::convert::Into<::std::boxed::Box<dyn ::std::error::Error + ::std::marker::Send + ::std::marker::Sync + 'static>>,
305    ) -> Self {
306        Self::Unhandled(crate::error::sealed_unhandled::Unhandled {
307            source: err.into(),
308            meta: ::std::default::Default::default(),
309        })
310    }
311
312    /// Creates the `UpdatePullRequestStatusError::Unhandled` variant from an [`ErrorMetadata`](::aws_smithy_types::error::ErrorMetadata).
313    pub fn generic(err: ::aws_smithy_types::error::ErrorMetadata) -> Self {
314        Self::Unhandled(crate::error::sealed_unhandled::Unhandled {
315            source: err.clone().into(),
316            meta: err,
317        })
318    }
319    ///
320    /// Returns error metadata, which includes the error code, message,
321    /// request ID, and potentially additional information.
322    ///
323    pub fn meta(&self) -> &::aws_smithy_types::error::ErrorMetadata {
324        match self {
325            Self::EncryptionIntegrityChecksFailedException(e) => ::aws_smithy_types::error::metadata::ProvideErrorMetadata::meta(e),
326            Self::EncryptionKeyAccessDeniedException(e) => ::aws_smithy_types::error::metadata::ProvideErrorMetadata::meta(e),
327            Self::EncryptionKeyDisabledException(e) => ::aws_smithy_types::error::metadata::ProvideErrorMetadata::meta(e),
328            Self::EncryptionKeyNotFoundException(e) => ::aws_smithy_types::error::metadata::ProvideErrorMetadata::meta(e),
329            Self::EncryptionKeyUnavailableException(e) => ::aws_smithy_types::error::metadata::ProvideErrorMetadata::meta(e),
330            Self::InvalidPullRequestIdException(e) => ::aws_smithy_types::error::metadata::ProvideErrorMetadata::meta(e),
331            Self::InvalidPullRequestStatusException(e) => ::aws_smithy_types::error::metadata::ProvideErrorMetadata::meta(e),
332            Self::InvalidPullRequestStatusUpdateException(e) => ::aws_smithy_types::error::metadata::ProvideErrorMetadata::meta(e),
333            Self::PullRequestDoesNotExistException(e) => ::aws_smithy_types::error::metadata::ProvideErrorMetadata::meta(e),
334            Self::PullRequestIdRequiredException(e) => ::aws_smithy_types::error::metadata::ProvideErrorMetadata::meta(e),
335            Self::PullRequestStatusRequiredException(e) => ::aws_smithy_types::error::metadata::ProvideErrorMetadata::meta(e),
336            Self::Unhandled(e) => &e.meta,
337        }
338    }
339    /// Returns `true` if the error kind is `UpdatePullRequestStatusError::EncryptionIntegrityChecksFailedException`.
340    pub fn is_encryption_integrity_checks_failed_exception(&self) -> bool {
341        matches!(self, Self::EncryptionIntegrityChecksFailedException(_))
342    }
343    /// Returns `true` if the error kind is `UpdatePullRequestStatusError::EncryptionKeyAccessDeniedException`.
344    pub fn is_encryption_key_access_denied_exception(&self) -> bool {
345        matches!(self, Self::EncryptionKeyAccessDeniedException(_))
346    }
347    /// Returns `true` if the error kind is `UpdatePullRequestStatusError::EncryptionKeyDisabledException`.
348    pub fn is_encryption_key_disabled_exception(&self) -> bool {
349        matches!(self, Self::EncryptionKeyDisabledException(_))
350    }
351    /// Returns `true` if the error kind is `UpdatePullRequestStatusError::EncryptionKeyNotFoundException`.
352    pub fn is_encryption_key_not_found_exception(&self) -> bool {
353        matches!(self, Self::EncryptionKeyNotFoundException(_))
354    }
355    /// Returns `true` if the error kind is `UpdatePullRequestStatusError::EncryptionKeyUnavailableException`.
356    pub fn is_encryption_key_unavailable_exception(&self) -> bool {
357        matches!(self, Self::EncryptionKeyUnavailableException(_))
358    }
359    /// Returns `true` if the error kind is `UpdatePullRequestStatusError::InvalidPullRequestIdException`.
360    pub fn is_invalid_pull_request_id_exception(&self) -> bool {
361        matches!(self, Self::InvalidPullRequestIdException(_))
362    }
363    /// Returns `true` if the error kind is `UpdatePullRequestStatusError::InvalidPullRequestStatusException`.
364    pub fn is_invalid_pull_request_status_exception(&self) -> bool {
365        matches!(self, Self::InvalidPullRequestStatusException(_))
366    }
367    /// Returns `true` if the error kind is `UpdatePullRequestStatusError::InvalidPullRequestStatusUpdateException`.
368    pub fn is_invalid_pull_request_status_update_exception(&self) -> bool {
369        matches!(self, Self::InvalidPullRequestStatusUpdateException(_))
370    }
371    /// Returns `true` if the error kind is `UpdatePullRequestStatusError::PullRequestDoesNotExistException`.
372    pub fn is_pull_request_does_not_exist_exception(&self) -> bool {
373        matches!(self, Self::PullRequestDoesNotExistException(_))
374    }
375    /// Returns `true` if the error kind is `UpdatePullRequestStatusError::PullRequestIdRequiredException`.
376    pub fn is_pull_request_id_required_exception(&self) -> bool {
377        matches!(self, Self::PullRequestIdRequiredException(_))
378    }
379    /// Returns `true` if the error kind is `UpdatePullRequestStatusError::PullRequestStatusRequiredException`.
380    pub fn is_pull_request_status_required_exception(&self) -> bool {
381        matches!(self, Self::PullRequestStatusRequiredException(_))
382    }
383}
384impl ::std::error::Error for UpdatePullRequestStatusError {
385    fn source(&self) -> ::std::option::Option<&(dyn ::std::error::Error + 'static)> {
386        match self {
387            Self::EncryptionIntegrityChecksFailedException(_inner) => ::std::option::Option::Some(_inner),
388            Self::EncryptionKeyAccessDeniedException(_inner) => ::std::option::Option::Some(_inner),
389            Self::EncryptionKeyDisabledException(_inner) => ::std::option::Option::Some(_inner),
390            Self::EncryptionKeyNotFoundException(_inner) => ::std::option::Option::Some(_inner),
391            Self::EncryptionKeyUnavailableException(_inner) => ::std::option::Option::Some(_inner),
392            Self::InvalidPullRequestIdException(_inner) => ::std::option::Option::Some(_inner),
393            Self::InvalidPullRequestStatusException(_inner) => ::std::option::Option::Some(_inner),
394            Self::InvalidPullRequestStatusUpdateException(_inner) => ::std::option::Option::Some(_inner),
395            Self::PullRequestDoesNotExistException(_inner) => ::std::option::Option::Some(_inner),
396            Self::PullRequestIdRequiredException(_inner) => ::std::option::Option::Some(_inner),
397            Self::PullRequestStatusRequiredException(_inner) => ::std::option::Option::Some(_inner),
398            Self::Unhandled(_inner) => ::std::option::Option::Some(&*_inner.source),
399        }
400    }
401}
402impl ::std::fmt::Display for UpdatePullRequestStatusError {
403    fn fmt(&self, f: &mut ::std::fmt::Formatter<'_>) -> ::std::fmt::Result {
404        match self {
405            Self::EncryptionIntegrityChecksFailedException(_inner) => _inner.fmt(f),
406            Self::EncryptionKeyAccessDeniedException(_inner) => _inner.fmt(f),
407            Self::EncryptionKeyDisabledException(_inner) => _inner.fmt(f),
408            Self::EncryptionKeyNotFoundException(_inner) => _inner.fmt(f),
409            Self::EncryptionKeyUnavailableException(_inner) => _inner.fmt(f),
410            Self::InvalidPullRequestIdException(_inner) => _inner.fmt(f),
411            Self::InvalidPullRequestStatusException(_inner) => _inner.fmt(f),
412            Self::InvalidPullRequestStatusUpdateException(_inner) => _inner.fmt(f),
413            Self::PullRequestDoesNotExistException(_inner) => _inner.fmt(f),
414            Self::PullRequestIdRequiredException(_inner) => _inner.fmt(f),
415            Self::PullRequestStatusRequiredException(_inner) => _inner.fmt(f),
416            Self::Unhandled(_inner) => {
417                if let ::std::option::Option::Some(code) = ::aws_smithy_types::error::metadata::ProvideErrorMetadata::code(self) {
418                    write!(f, "unhandled error ({code})")
419                } else {
420                    f.write_str("unhandled error")
421                }
422            }
423        }
424    }
425}
426impl ::aws_smithy_types::retry::ProvideErrorKind for UpdatePullRequestStatusError {
427    fn code(&self) -> ::std::option::Option<&str> {
428        ::aws_smithy_types::error::metadata::ProvideErrorMetadata::code(self)
429    }
430    fn retryable_error_kind(&self) -> ::std::option::Option<::aws_smithy_types::retry::ErrorKind> {
431        ::std::option::Option::None
432    }
433}
434impl ::aws_smithy_types::error::metadata::ProvideErrorMetadata for UpdatePullRequestStatusError {
435    fn meta(&self) -> &::aws_smithy_types::error::ErrorMetadata {
436        match self {
437            Self::EncryptionIntegrityChecksFailedException(_inner) => ::aws_smithy_types::error::metadata::ProvideErrorMetadata::meta(_inner),
438            Self::EncryptionKeyAccessDeniedException(_inner) => ::aws_smithy_types::error::metadata::ProvideErrorMetadata::meta(_inner),
439            Self::EncryptionKeyDisabledException(_inner) => ::aws_smithy_types::error::metadata::ProvideErrorMetadata::meta(_inner),
440            Self::EncryptionKeyNotFoundException(_inner) => ::aws_smithy_types::error::metadata::ProvideErrorMetadata::meta(_inner),
441            Self::EncryptionKeyUnavailableException(_inner) => ::aws_smithy_types::error::metadata::ProvideErrorMetadata::meta(_inner),
442            Self::InvalidPullRequestIdException(_inner) => ::aws_smithy_types::error::metadata::ProvideErrorMetadata::meta(_inner),
443            Self::InvalidPullRequestStatusException(_inner) => ::aws_smithy_types::error::metadata::ProvideErrorMetadata::meta(_inner),
444            Self::InvalidPullRequestStatusUpdateException(_inner) => ::aws_smithy_types::error::metadata::ProvideErrorMetadata::meta(_inner),
445            Self::PullRequestDoesNotExistException(_inner) => ::aws_smithy_types::error::metadata::ProvideErrorMetadata::meta(_inner),
446            Self::PullRequestIdRequiredException(_inner) => ::aws_smithy_types::error::metadata::ProvideErrorMetadata::meta(_inner),
447            Self::PullRequestStatusRequiredException(_inner) => ::aws_smithy_types::error::metadata::ProvideErrorMetadata::meta(_inner),
448            Self::Unhandled(_inner) => &_inner.meta,
449        }
450    }
451}
452impl ::aws_smithy_runtime_api::client::result::CreateUnhandledError for UpdatePullRequestStatusError {
453    fn create_unhandled_error(
454        source: ::std::boxed::Box<dyn ::std::error::Error + ::std::marker::Send + ::std::marker::Sync + 'static>,
455        meta: ::std::option::Option<::aws_smithy_types::error::ErrorMetadata>,
456    ) -> Self {
457        Self::Unhandled(crate::error::sealed_unhandled::Unhandled {
458            source,
459            meta: meta.unwrap_or_default(),
460        })
461    }
462}
463impl ::aws_types::request_id::RequestId for crate::operation::update_pull_request_status::UpdatePullRequestStatusError {
464    fn request_id(&self) -> Option<&str> {
465        self.meta().request_id()
466    }
467}
468
469pub use crate::operation::update_pull_request_status::_update_pull_request_status_output::UpdatePullRequestStatusOutput;
470
471pub use crate::operation::update_pull_request_status::_update_pull_request_status_input::UpdatePullRequestStatusInput;
472
473mod _update_pull_request_status_input;
474
475mod _update_pull_request_status_output;
476
477/// Builders
478pub mod builders;
aws_sdk_codecommit/operation/update_pull_request_status.rs

aws_sdk_codecommit/operation/
update_pull_request_status.rs
