aws_sdk_codecommit/operation/
get_comments_for_pull_request.rs

1// Code generated by software.amazon.smithy.rust.codegen.smithy-rs. DO NOT EDIT.
2/// Orchestration and serialization glue logic for `GetCommentsForPullRequest`.
3#[derive(::std::clone::Clone, ::std::default::Default, ::std::fmt::Debug)]
4#[non_exhaustive]
5pub struct GetCommentsForPullRequest;
6impl GetCommentsForPullRequest {
7    /// Creates a new `GetCommentsForPullRequest`
8    pub fn new() -> Self {
9        Self
10    }
11    pub(crate) async fn orchestrate(
12        runtime_plugins: &::aws_smithy_runtime_api::client::runtime_plugin::RuntimePlugins,
13        input: crate::operation::get_comments_for_pull_request::GetCommentsForPullRequestInput,
14    ) -> ::std::result::Result<
15        crate::operation::get_comments_for_pull_request::GetCommentsForPullRequestOutput,
16        ::aws_smithy_runtime_api::client::result::SdkError<
17            crate::operation::get_comments_for_pull_request::GetCommentsForPullRequestError,
18            ::aws_smithy_runtime_api::client::orchestrator::HttpResponse,
19        >,
20    > {
21        let map_err = |err: ::aws_smithy_runtime_api::client::result::SdkError<
22            ::aws_smithy_runtime_api::client::interceptors::context::Error,
23            ::aws_smithy_runtime_api::client::orchestrator::HttpResponse,
24        >| {
25            err.map_service_error(|err| {
26                err.downcast::<crate::operation::get_comments_for_pull_request::GetCommentsForPullRequestError>()
27                    .expect("correct error type")
28            })
29        };
30        let context = Self::orchestrate_with_stop_point(runtime_plugins, input, ::aws_smithy_runtime::client::orchestrator::StopPoint::None)
31            .await
32            .map_err(map_err)?;
33        let output = context.finalize().map_err(map_err)?;
34        ::std::result::Result::Ok(
35            output
36                .downcast::<crate::operation::get_comments_for_pull_request::GetCommentsForPullRequestOutput>()
37                .expect("correct output type"),
38        )
39    }
40
41    pub(crate) async fn orchestrate_with_stop_point(
42        runtime_plugins: &::aws_smithy_runtime_api::client::runtime_plugin::RuntimePlugins,
43        input: crate::operation::get_comments_for_pull_request::GetCommentsForPullRequestInput,
44        stop_point: ::aws_smithy_runtime::client::orchestrator::StopPoint,
45    ) -> ::std::result::Result<
46        ::aws_smithy_runtime_api::client::interceptors::context::InterceptorContext,
47        ::aws_smithy_runtime_api::client::result::SdkError<
48            ::aws_smithy_runtime_api::client::interceptors::context::Error,
49            ::aws_smithy_runtime_api::client::orchestrator::HttpResponse,
50        >,
51    > {
52        let input = ::aws_smithy_runtime_api::client::interceptors::context::Input::erase(input);
53        use ::tracing::Instrument;
54        ::aws_smithy_runtime::client::orchestrator::invoke_with_stop_point(
55            "CodeCommit",
56            "GetCommentsForPullRequest",
57            input,
58            runtime_plugins,
59            stop_point,
60        )
61        // Create a parent span for the entire operation. Includes a random, internal-only,
62        // seven-digit ID for the operation orchestration so that it can be correlated in the logs.
63        .instrument(::tracing::debug_span!(
64            "CodeCommit.GetCommentsForPullRequest",
65            "rpc.service" = "CodeCommit",
66            "rpc.method" = "GetCommentsForPullRequest",
67            "sdk_invocation_id" = ::fastrand::u32(1_000_000..10_000_000),
68            "rpc.system" = "aws-api",
69        ))
70        .await
71    }
72
73    pub(crate) fn operation_runtime_plugins(
74        client_runtime_plugins: ::aws_smithy_runtime_api::client::runtime_plugin::RuntimePlugins,
75        client_config: &crate::config::Config,
76        config_override: ::std::option::Option<crate::config::Builder>,
77    ) -> ::aws_smithy_runtime_api::client::runtime_plugin::RuntimePlugins {
78        let mut runtime_plugins = client_runtime_plugins.with_operation_plugin(Self::new());
79
80        if let ::std::option::Option::Some(config_override) = config_override {
81            for plugin in config_override.runtime_plugins.iter().cloned() {
82                runtime_plugins = runtime_plugins.with_operation_plugin(plugin);
83            }
84            runtime_plugins = runtime_plugins.with_operation_plugin(crate::config::ConfigOverrideRuntimePlugin::new(
85                config_override,
86                client_config.config.clone(),
87                &client_config.runtime_components,
88            ));
89        }
90        runtime_plugins
91    }
92}
93impl ::aws_smithy_runtime_api::client::runtime_plugin::RuntimePlugin for GetCommentsForPullRequest {
94    fn config(&self) -> ::std::option::Option<::aws_smithy_types::config_bag::FrozenLayer> {
95        let mut cfg = ::aws_smithy_types::config_bag::Layer::new("GetCommentsForPullRequest");
96
97        cfg.store_put(::aws_smithy_runtime_api::client::ser_de::SharedRequestSerializer::new(
98            GetCommentsForPullRequestRequestSerializer,
99        ));
100        cfg.store_put(::aws_smithy_runtime_api::client::ser_de::SharedResponseDeserializer::new(
101            GetCommentsForPullRequestResponseDeserializer,
102        ));
103
104        cfg.store_put(::aws_smithy_runtime_api::client::auth::AuthSchemeOptionResolverParams::new(
105            crate::config::auth::Params::builder()
106                .operation_name("GetCommentsForPullRequest")
107                .build()
108                .expect("required fields set"),
109        ));
110
111        cfg.store_put(::aws_smithy_runtime_api::client::orchestrator::Metadata::new(
112            "GetCommentsForPullRequest",
113            "CodeCommit",
114        ));
115        let mut signing_options = ::aws_runtime::auth::SigningOptions::default();
116        signing_options.double_uri_encode = true;
117        signing_options.content_sha256_header = false;
118        signing_options.normalize_uri_path = true;
119        signing_options.payload_override = None;
120
121        cfg.store_put(::aws_runtime::auth::SigV4OperationSigningConfig {
122            signing_options,
123            ..::std::default::Default::default()
124        });
125
126        ::std::option::Option::Some(cfg.freeze())
127    }
128
129    fn runtime_components(
130        &self,
131        _: &::aws_smithy_runtime_api::client::runtime_components::RuntimeComponentsBuilder,
132    ) -> ::std::borrow::Cow<'_, ::aws_smithy_runtime_api::client::runtime_components::RuntimeComponentsBuilder> {
133        #[allow(unused_mut)]
134        let mut rcb = ::aws_smithy_runtime_api::client::runtime_components::RuntimeComponentsBuilder::new("GetCommentsForPullRequest")
135            .with_interceptor(::aws_smithy_runtime_api::client::interceptors::SharedInterceptor::permanent(
136                GetCommentsForPullRequestTelemetryInputCaptureInterceptor,
137            ))
138            .with_interceptor(::aws_smithy_runtime_api::client::interceptors::SharedInterceptor::permanent(
139                ::aws_smithy_runtime::client::stalled_stream_protection::StalledStreamProtectionInterceptor::default(),
140            ))
141            .with_interceptor(::aws_smithy_runtime_api::client::interceptors::SharedInterceptor::permanent(
142                GetCommentsForPullRequestEndpointParamsInterceptor,
143            ))
144            .with_retry_classifier(::aws_smithy_runtime::client::retries::classifiers::TransientErrorClassifier::<
145                crate::operation::get_comments_for_pull_request::GetCommentsForPullRequestError,
146            >::new())
147            .with_retry_classifier(::aws_smithy_runtime::client::retries::classifiers::ModeledAsRetryableClassifier::<
148                crate::operation::get_comments_for_pull_request::GetCommentsForPullRequestError,
149            >::new())
150            .with_retry_classifier(::aws_runtime::retries::classifiers::AwsErrorCodeClassifier::<
151                crate::operation::get_comments_for_pull_request::GetCommentsForPullRequestError,
152            >::new())
153            .with_retry_classifier(::aws_runtime::service_clock_skew::ServiceClockSkewClassifier::<
154                crate::operation::get_comments_for_pull_request::GetCommentsForPullRequestError,
155            >::new());
156
157        ::std::borrow::Cow::Owned(rcb)
158    }
159}
160
161#[derive(Debug)]
162struct GetCommentsForPullRequestTelemetryInputCaptureInterceptor;
163
164#[::aws_smithy_runtime_api::client::interceptors::dyn_dispatch_hint]
165impl ::aws_smithy_runtime_api::client::interceptors::Intercept for GetCommentsForPullRequestTelemetryInputCaptureInterceptor {
166    fn name(&self) -> &'static str {
167        "GetCommentsForPullRequestTelemetryInputCaptureInterceptor"
168    }
169
170    fn read_before_execution(
171        &self,
172        context: &::aws_smithy_runtime_api::client::interceptors::context::BeforeSerializationInterceptorContextRef<
173            '_,
174            ::aws_smithy_runtime_api::client::interceptors::context::Input,
175            ::aws_smithy_runtime_api::client::interceptors::context::Output,
176            ::aws_smithy_runtime_api::client::interceptors::context::Error,
177        >,
178        cfg: &mut ::aws_smithy_types::config_bag::ConfigBag,
179    ) -> ::std::result::Result<(), ::aws_smithy_runtime_api::box_error::BoxError> {
180        // Nothing to do unless the customer opted in by naming members to record.
181        let ::std::option::Option::Some(requested) = cfg
182            .load::<::aws_smithy_types::telemetry::RequestedTelemetryAttributes>()
183            .filter(|r| !r.is_empty())
184        else {
185            return ::std::result::Result::Ok(());
186        };
187
188        let ::std::option::Option::Some(input) = context.input().downcast_ref::<GetCommentsForPullRequestInput>() else {
189            // A mismatched input is not this interceptor's concern; skip quietly.
190            return ::std::result::Result::Ok(());
191        };
192
193        let mut captured = ::aws_smithy_types::telemetry::CapturedTelemetryAttributes::default();
194        if requested.should_capture("pullRequestId") {
195            if let ::std::option::Option::Some(value) = input.pull_request_id.as_deref() {
196                captured.insert("pullRequestId", value);
197            }
198        }
199        if requested.should_capture("repositoryName") {
200            if let ::std::option::Option::Some(value) = input.repository_name.as_deref() {
201                captured.insert("repositoryName", value);
202            }
203        }
204        if requested.should_capture("beforeCommitId") {
205            if let ::std::option::Option::Some(value) = input.before_commit_id.as_deref() {
206                captured.insert("beforeCommitId", value);
207            }
208        }
209        if requested.should_capture("afterCommitId") {
210            if let ::std::option::Option::Some(value) = input.after_commit_id.as_deref() {
211                captured.insert("afterCommitId", value);
212            }
213        }
214        if requested.should_capture("nextToken") {
215            if let ::std::option::Option::Some(value) = input.next_token.as_deref() {
216                captured.insert("nextToken", value);
217            }
218        }
219
220        cfg.interceptor_state().store_put(captured);
221        ::std::result::Result::Ok(())
222    }
223}
224#[derive(Debug)]
225struct GetCommentsForPullRequestResponseDeserializer;
226impl ::aws_smithy_runtime_api::client::ser_de::DeserializeResponse for GetCommentsForPullRequestResponseDeserializer {
227    fn deserialize_nonstreaming_with_config(
228        &self,
229        response: &::aws_smithy_runtime_api::client::orchestrator::HttpResponse,
230        _cfg: &::aws_smithy_types::config_bag::ConfigBag,
231    ) -> ::aws_smithy_runtime_api::client::interceptors::context::OutputOrError {
232        let (success, status) = (response.status().is_success(), response.status().as_u16());
233        let headers = response.headers();
234        let body = response.body().bytes().expect("body loaded");
235        #[allow(unused_mut)]
236        let mut force_error = false;
237        ::tracing::debug!(request_id = ?::aws_types::request_id::RequestId::request_id(response));
238        let parse_result = if !success && status != 200 || force_error {
239            crate::protocol_serde::shape_get_comments_for_pull_request::de_get_comments_for_pull_request_http_error(status, headers, body)
240        } else {
241            crate::protocol_serde::shape_get_comments_for_pull_request::de_get_comments_for_pull_request_http_response(status, headers, body)
242        };
243        crate::protocol_serde::type_erase_result(parse_result)
244    }
245}
246#[derive(Debug)]
247struct GetCommentsForPullRequestRequestSerializer;
248impl ::aws_smithy_runtime_api::client::ser_de::SerializeRequest for GetCommentsForPullRequestRequestSerializer {
249    #[allow(unused_mut, clippy::let_and_return, clippy::needless_borrow, clippy::useless_conversion)]
250    fn serialize_input(
251        &self,
252        input: ::aws_smithy_runtime_api::client::interceptors::context::Input,
253        _cfg: &mut ::aws_smithy_types::config_bag::ConfigBag,
254    ) -> ::std::result::Result<::aws_smithy_runtime_api::client::orchestrator::HttpRequest, ::aws_smithy_runtime_api::box_error::BoxError> {
255        let input = input
256            .downcast::<crate::operation::get_comments_for_pull_request::GetCommentsForPullRequestInput>()
257            .expect("correct type");
258        let _header_serialization_settings = _cfg
259            .load::<crate::serialization_settings::HeaderSerializationSettings>()
260            .cloned()
261            .unwrap_or_default();
262        let mut request_builder = {
263            #[allow(clippy::uninlined_format_args)]
264            fn uri_base(
265                _input: &crate::operation::get_comments_for_pull_request::GetCommentsForPullRequestInput,
266                output: &mut ::std::string::String,
267            ) -> ::std::result::Result<(), ::aws_smithy_types::error::operation::BuildError> {
268                use ::std::fmt::Write as _;
269                ::std::write!(output, "/").expect("formatting should succeed");
270                ::std::result::Result::Ok(())
271            }
272            #[allow(clippy::unnecessary_wraps)]
273            fn update_http_builder(
274                input: &crate::operation::get_comments_for_pull_request::GetCommentsForPullRequestInput,
275                builder: ::http_1x::request::Builder,
276            ) -> ::std::result::Result<::http_1x::request::Builder, ::aws_smithy_types::error::operation::BuildError> {
277                let mut uri = ::std::string::String::new();
278                uri_base(input, &mut uri)?;
279                ::std::result::Result::Ok(builder.method("POST").uri(uri))
280            }
281            let mut builder = update_http_builder(&input, ::http_1x::request::Builder::new())?;
282            builder = _header_serialization_settings.set_default_header(builder, ::http_1x::header::CONTENT_TYPE, "application/x-amz-json-1.1");
283            builder = _header_serialization_settings.set_default_header(
284                builder,
285                ::http_1x::header::HeaderName::from_static("x-amz-target"),
286                "CodeCommit_20150413.GetCommentsForPullRequest",
287            );
288            builder
289        };
290        let body = ::aws_smithy_types::body::SdkBody::from(
291            crate::protocol_serde::shape_get_comments_for_pull_request::ser_get_comments_for_pull_request_input(&input)?,
292        );
293        if let Some(content_length) = body.content_length() {
294            let content_length = content_length.to_string();
295            request_builder = _header_serialization_settings.set_default_header(request_builder, ::http_1x::header::CONTENT_LENGTH, &content_length);
296        }
297        ::std::result::Result::Ok(request_builder.body(body).expect("valid request").try_into().unwrap())
298    }
299}
300#[derive(Debug)]
301struct GetCommentsForPullRequestEndpointParamsInterceptor;
302
303#[::aws_smithy_runtime_api::client::interceptors::dyn_dispatch_hint]
304impl ::aws_smithy_runtime_api::client::interceptors::Intercept for GetCommentsForPullRequestEndpointParamsInterceptor {
305    fn name(&self) -> &'static str {
306        "GetCommentsForPullRequestEndpointParamsInterceptor"
307    }
308
309    fn read_before_execution(
310        &self,
311        context: &::aws_smithy_runtime_api::client::interceptors::context::BeforeSerializationInterceptorContextRef<
312            '_,
313            ::aws_smithy_runtime_api::client::interceptors::context::Input,
314            ::aws_smithy_runtime_api::client::interceptors::context::Output,
315            ::aws_smithy_runtime_api::client::interceptors::context::Error,
316        >,
317        cfg: &mut ::aws_smithy_types::config_bag::ConfigBag,
318    ) -> ::std::result::Result<(), ::aws_smithy_runtime_api::box_error::BoxError> {
319        let _input = context
320            .input()
321            .downcast_ref::<GetCommentsForPullRequestInput>()
322            .ok_or("failed to downcast to GetCommentsForPullRequestInput")?;
323
324        let params = crate::config::endpoint::Params::builder()
325            .set_region(cfg.load::<::aws_types::region::Region>().map(|r| r.as_ref().to_owned()))
326            .set_use_dual_stack(cfg.load::<::aws_types::endpoint_config::UseDualStack>().map(|ty| ty.0))
327            .set_use_fips(cfg.load::<::aws_types::endpoint_config::UseFips>().map(|ty| ty.0))
328            .set_endpoint(cfg.load::<::aws_types::endpoint_config::EndpointUrl>().map(|ty| ty.0.clone()))
329            .build()
330            .map_err(|err| {
331                ::aws_smithy_runtime_api::client::interceptors::error::ContextAttachedError::new("endpoint params could not be built", err)
332            })?;
333        cfg.interceptor_state()
334            .store_put(::aws_smithy_runtime_api::client::endpoint::EndpointResolverParams::new(params));
335        ::std::result::Result::Ok(())
336    }
337}
338
339// The get_* functions below are generated from JMESPath expressions in the
340// operationContextParams trait. They target the operation's input shape.
341
342/// Error type for the `GetCommentsForPullRequestError` operation.
343#[non_exhaustive]
344#[derive(::std::fmt::Debug)]
345pub enum GetCommentsForPullRequestError {
346    /// <p>The specified commit does not exist or no commit was specified, and the specified repository has no default branch.</p>
347    CommitDoesNotExistException(crate::types::error::CommitDoesNotExistException),
348    /// <p>A commit ID was not specified.</p>
349    CommitIdRequiredException(crate::types::error::CommitIdRequiredException),
350    /// <p>An encryption integrity check failed.</p>
351    EncryptionIntegrityChecksFailedException(crate::types::error::EncryptionIntegrityChecksFailedException),
352    /// <p>An encryption key could not be accessed.</p>
353    EncryptionKeyAccessDeniedException(crate::types::error::EncryptionKeyAccessDeniedException),
354    /// <p>The encryption key is disabled.</p>
355    EncryptionKeyDisabledException(crate::types::error::EncryptionKeyDisabledException),
356    /// <p>No encryption key was found.</p>
357    EncryptionKeyNotFoundException(crate::types::error::EncryptionKeyNotFoundException),
358    /// <p>The encryption key is not available.</p>
359    EncryptionKeyUnavailableException(crate::types::error::EncryptionKeyUnavailableException),
360    /// <p>The specified commit ID is not valid.</p>
361    InvalidCommitIdException(crate::types::error::InvalidCommitIdException),
362    /// <p>The specified continuation token is not valid.</p>
363    InvalidContinuationTokenException(crate::types::error::InvalidContinuationTokenException),
364    /// <p>The specified number of maximum results is not valid.</p>
365    InvalidMaxResultsException(crate::types::error::InvalidMaxResultsException),
366    /// <p>The pull request ID is not valid. Make sure that you have provided the full ID and that the pull request is in the specified repository, and then try again.</p>
367    InvalidPullRequestIdException(crate::types::error::InvalidPullRequestIdException),
368    /// <p>A specified repository name is not valid.</p><note>
369    /// <p>This exception occurs only when a specified repository name is not valid. Other exceptions occur when a required repository parameter is missing, or when a specified repository does not exist.</p>
370    /// </note>
371    InvalidRepositoryNameException(crate::types::error::InvalidRepositoryNameException),
372    /// <p>The pull request ID could not be found. Make sure that you have specified the correct repository name and pull request ID, and then try again.</p>
373    PullRequestDoesNotExistException(crate::types::error::PullRequestDoesNotExistException),
374    /// <p>A pull request ID is required, but none was provided.</p>
375    PullRequestIdRequiredException(crate::types::error::PullRequestIdRequiredException),
376    /// <p>The specified repository does not exist.</p>
377    RepositoryDoesNotExistException(crate::types::error::RepositoryDoesNotExistException),
378    /// <p>A repository name is required, but was not specified.</p>
379    RepositoryNameRequiredException(crate::types::error::RepositoryNameRequiredException),
380    /// <p>The repository does not contain any pull requests with that pull request ID. Use GetPullRequest to verify the correct repository name for the pull request ID.</p>
381    RepositoryNotAssociatedWithPullRequestException(crate::types::error::RepositoryNotAssociatedWithPullRequestException),
382    /// An unexpected error occurred (e.g., invalid JSON returned by the service or an unknown error code).
383    #[deprecated(note = "Matching `Unhandled` directly is not forwards compatible. Instead, match using a \
384    variable wildcard pattern and check `.code()`:
385     \
386    &nbsp;&nbsp;&nbsp;`err if err.code() == Some(\"SpecificExceptionCode\") => { /* handle the error */ }`
387     \
388    See [`ProvideErrorMetadata`](#impl-ProvideErrorMetadata-for-GetCommentsForPullRequestError) for what information is available for the error.")]
389    Unhandled(crate::error::sealed_unhandled::Unhandled),
390}
391impl GetCommentsForPullRequestError {
392    /// Creates the `GetCommentsForPullRequestError::Unhandled` variant from any error type.
393    pub fn unhandled(
394        err: impl ::std::convert::Into<::std::boxed::Box<dyn ::std::error::Error + ::std::marker::Send + ::std::marker::Sync + 'static>>,
395    ) -> Self {
396        Self::Unhandled(crate::error::sealed_unhandled::Unhandled {
397            source: err.into(),
398            meta: ::std::default::Default::default(),
399        })
400    }
401
402    /// Creates the `GetCommentsForPullRequestError::Unhandled` variant from an [`ErrorMetadata`](::aws_smithy_types::error::ErrorMetadata).
403    pub fn generic(err: ::aws_smithy_types::error::ErrorMetadata) -> Self {
404        Self::Unhandled(crate::error::sealed_unhandled::Unhandled {
405            source: err.clone().into(),
406            meta: err,
407        })
408    }
409    ///
410    /// Returns error metadata, which includes the error code, message,
411    /// request ID, and potentially additional information.
412    ///
413    pub fn meta(&self) -> &::aws_smithy_types::error::ErrorMetadata {
414        match self {
415            Self::CommitDoesNotExistException(e) => ::aws_smithy_types::error::metadata::ProvideErrorMetadata::meta(e),
416            Self::CommitIdRequiredException(e) => ::aws_smithy_types::error::metadata::ProvideErrorMetadata::meta(e),
417            Self::EncryptionIntegrityChecksFailedException(e) => ::aws_smithy_types::error::metadata::ProvideErrorMetadata::meta(e),
418            Self::EncryptionKeyAccessDeniedException(e) => ::aws_smithy_types::error::metadata::ProvideErrorMetadata::meta(e),
419            Self::EncryptionKeyDisabledException(e) => ::aws_smithy_types::error::metadata::ProvideErrorMetadata::meta(e),
420            Self::EncryptionKeyNotFoundException(e) => ::aws_smithy_types::error::metadata::ProvideErrorMetadata::meta(e),
421            Self::EncryptionKeyUnavailableException(e) => ::aws_smithy_types::error::metadata::ProvideErrorMetadata::meta(e),
422            Self::InvalidCommitIdException(e) => ::aws_smithy_types::error::metadata::ProvideErrorMetadata::meta(e),
423            Self::InvalidContinuationTokenException(e) => ::aws_smithy_types::error::metadata::ProvideErrorMetadata::meta(e),
424            Self::InvalidMaxResultsException(e) => ::aws_smithy_types::error::metadata::ProvideErrorMetadata::meta(e),
425            Self::InvalidPullRequestIdException(e) => ::aws_smithy_types::error::metadata::ProvideErrorMetadata::meta(e),
426            Self::InvalidRepositoryNameException(e) => ::aws_smithy_types::error::metadata::ProvideErrorMetadata::meta(e),
427            Self::PullRequestDoesNotExistException(e) => ::aws_smithy_types::error::metadata::ProvideErrorMetadata::meta(e),
428            Self::PullRequestIdRequiredException(e) => ::aws_smithy_types::error::metadata::ProvideErrorMetadata::meta(e),
429            Self::RepositoryDoesNotExistException(e) => ::aws_smithy_types::error::metadata::ProvideErrorMetadata::meta(e),
430            Self::RepositoryNameRequiredException(e) => ::aws_smithy_types::error::metadata::ProvideErrorMetadata::meta(e),
431            Self::RepositoryNotAssociatedWithPullRequestException(e) => ::aws_smithy_types::error::metadata::ProvideErrorMetadata::meta(e),
432            Self::Unhandled(e) => &e.meta,
433        }
434    }
435    /// Returns `true` if the error kind is `GetCommentsForPullRequestError::CommitDoesNotExistException`.
436    pub fn is_commit_does_not_exist_exception(&self) -> bool {
437        matches!(self, Self::CommitDoesNotExistException(_))
438    }
439    /// Returns `true` if the error kind is `GetCommentsForPullRequestError::CommitIdRequiredException`.
440    pub fn is_commit_id_required_exception(&self) -> bool {
441        matches!(self, Self::CommitIdRequiredException(_))
442    }
443    /// Returns `true` if the error kind is `GetCommentsForPullRequestError::EncryptionIntegrityChecksFailedException`.
444    pub fn is_encryption_integrity_checks_failed_exception(&self) -> bool {
445        matches!(self, Self::EncryptionIntegrityChecksFailedException(_))
446    }
447    /// Returns `true` if the error kind is `GetCommentsForPullRequestError::EncryptionKeyAccessDeniedException`.
448    pub fn is_encryption_key_access_denied_exception(&self) -> bool {
449        matches!(self, Self::EncryptionKeyAccessDeniedException(_))
450    }
451    /// Returns `true` if the error kind is `GetCommentsForPullRequestError::EncryptionKeyDisabledException`.
452    pub fn is_encryption_key_disabled_exception(&self) -> bool {
453        matches!(self, Self::EncryptionKeyDisabledException(_))
454    }
455    /// Returns `true` if the error kind is `GetCommentsForPullRequestError::EncryptionKeyNotFoundException`.
456    pub fn is_encryption_key_not_found_exception(&self) -> bool {
457        matches!(self, Self::EncryptionKeyNotFoundException(_))
458    }
459    /// Returns `true` if the error kind is `GetCommentsForPullRequestError::EncryptionKeyUnavailableException`.
460    pub fn is_encryption_key_unavailable_exception(&self) -> bool {
461        matches!(self, Self::EncryptionKeyUnavailableException(_))
462    }
463    /// Returns `true` if the error kind is `GetCommentsForPullRequestError::InvalidCommitIdException`.
464    pub fn is_invalid_commit_id_exception(&self) -> bool {
465        matches!(self, Self::InvalidCommitIdException(_))
466    }
467    /// Returns `true` if the error kind is `GetCommentsForPullRequestError::InvalidContinuationTokenException`.
468    pub fn is_invalid_continuation_token_exception(&self) -> bool {
469        matches!(self, Self::InvalidContinuationTokenException(_))
470    }
471    /// Returns `true` if the error kind is `GetCommentsForPullRequestError::InvalidMaxResultsException`.
472    pub fn is_invalid_max_results_exception(&self) -> bool {
473        matches!(self, Self::InvalidMaxResultsException(_))
474    }
475    /// Returns `true` if the error kind is `GetCommentsForPullRequestError::InvalidPullRequestIdException`.
476    pub fn is_invalid_pull_request_id_exception(&self) -> bool {
477        matches!(self, Self::InvalidPullRequestIdException(_))
478    }
479    /// Returns `true` if the error kind is `GetCommentsForPullRequestError::InvalidRepositoryNameException`.
480    pub fn is_invalid_repository_name_exception(&self) -> bool {
481        matches!(self, Self::InvalidRepositoryNameException(_))
482    }
483    /// Returns `true` if the error kind is `GetCommentsForPullRequestError::PullRequestDoesNotExistException`.
484    pub fn is_pull_request_does_not_exist_exception(&self) -> bool {
485        matches!(self, Self::PullRequestDoesNotExistException(_))
486    }
487    /// Returns `true` if the error kind is `GetCommentsForPullRequestError::PullRequestIdRequiredException`.
488    pub fn is_pull_request_id_required_exception(&self) -> bool {
489        matches!(self, Self::PullRequestIdRequiredException(_))
490    }
491    /// Returns `true` if the error kind is `GetCommentsForPullRequestError::RepositoryDoesNotExistException`.
492    pub fn is_repository_does_not_exist_exception(&self) -> bool {
493        matches!(self, Self::RepositoryDoesNotExistException(_))
494    }
495    /// Returns `true` if the error kind is `GetCommentsForPullRequestError::RepositoryNameRequiredException`.
496    pub fn is_repository_name_required_exception(&self) -> bool {
497        matches!(self, Self::RepositoryNameRequiredException(_))
498    }
499    /// Returns `true` if the error kind is `GetCommentsForPullRequestError::RepositoryNotAssociatedWithPullRequestException`.
500    pub fn is_repository_not_associated_with_pull_request_exception(&self) -> bool {
501        matches!(self, Self::RepositoryNotAssociatedWithPullRequestException(_))
502    }
503}
504impl ::std::error::Error for GetCommentsForPullRequestError {
505    fn source(&self) -> ::std::option::Option<&(dyn ::std::error::Error + 'static)> {
506        match self {
507            Self::CommitDoesNotExistException(_inner) => ::std::option::Option::Some(_inner),
508            Self::CommitIdRequiredException(_inner) => ::std::option::Option::Some(_inner),
509            Self::EncryptionIntegrityChecksFailedException(_inner) => ::std::option::Option::Some(_inner),
510            Self::EncryptionKeyAccessDeniedException(_inner) => ::std::option::Option::Some(_inner),
511            Self::EncryptionKeyDisabledException(_inner) => ::std::option::Option::Some(_inner),
512            Self::EncryptionKeyNotFoundException(_inner) => ::std::option::Option::Some(_inner),
513            Self::EncryptionKeyUnavailableException(_inner) => ::std::option::Option::Some(_inner),
514            Self::InvalidCommitIdException(_inner) => ::std::option::Option::Some(_inner),
515            Self::InvalidContinuationTokenException(_inner) => ::std::option::Option::Some(_inner),
516            Self::InvalidMaxResultsException(_inner) => ::std::option::Option::Some(_inner),
517            Self::InvalidPullRequestIdException(_inner) => ::std::option::Option::Some(_inner),
518            Self::InvalidRepositoryNameException(_inner) => ::std::option::Option::Some(_inner),
519            Self::PullRequestDoesNotExistException(_inner) => ::std::option::Option::Some(_inner),
520            Self::PullRequestIdRequiredException(_inner) => ::std::option::Option::Some(_inner),
521            Self::RepositoryDoesNotExistException(_inner) => ::std::option::Option::Some(_inner),
522            Self::RepositoryNameRequiredException(_inner) => ::std::option::Option::Some(_inner),
523            Self::RepositoryNotAssociatedWithPullRequestException(_inner) => ::std::option::Option::Some(_inner),
524            Self::Unhandled(_inner) => ::std::option::Option::Some(&*_inner.source),
525        }
526    }
527}
528impl ::std::fmt::Display for GetCommentsForPullRequestError {
529    fn fmt(&self, f: &mut ::std::fmt::Formatter<'_>) -> ::std::fmt::Result {
530        match self {
531            Self::CommitDoesNotExistException(_inner) => _inner.fmt(f),
532            Self::CommitIdRequiredException(_inner) => _inner.fmt(f),
533            Self::EncryptionIntegrityChecksFailedException(_inner) => _inner.fmt(f),
534            Self::EncryptionKeyAccessDeniedException(_inner) => _inner.fmt(f),
535            Self::EncryptionKeyDisabledException(_inner) => _inner.fmt(f),
536            Self::EncryptionKeyNotFoundException(_inner) => _inner.fmt(f),
537            Self::EncryptionKeyUnavailableException(_inner) => _inner.fmt(f),
538            Self::InvalidCommitIdException(_inner) => _inner.fmt(f),
539            Self::InvalidContinuationTokenException(_inner) => _inner.fmt(f),
540            Self::InvalidMaxResultsException(_inner) => _inner.fmt(f),
541            Self::InvalidPullRequestIdException(_inner) => _inner.fmt(f),
542            Self::InvalidRepositoryNameException(_inner) => _inner.fmt(f),
543            Self::PullRequestDoesNotExistException(_inner) => _inner.fmt(f),
544            Self::PullRequestIdRequiredException(_inner) => _inner.fmt(f),
545            Self::RepositoryDoesNotExistException(_inner) => _inner.fmt(f),
546            Self::RepositoryNameRequiredException(_inner) => _inner.fmt(f),
547            Self::RepositoryNotAssociatedWithPullRequestException(_inner) => _inner.fmt(f),
548            Self::Unhandled(_inner) => {
549                if let ::std::option::Option::Some(code) = ::aws_smithy_types::error::metadata::ProvideErrorMetadata::code(self) {
550                    write!(f, "unhandled error ({code})")
551                } else {
552                    f.write_str("unhandled error")
553                }
554            }
555        }
556    }
557}
558impl ::aws_smithy_types::retry::ProvideErrorKind for GetCommentsForPullRequestError {
559    fn code(&self) -> ::std::option::Option<&str> {
560        ::aws_smithy_types::error::metadata::ProvideErrorMetadata::code(self)
561    }
562    fn retryable_error_kind(&self) -> ::std::option::Option<::aws_smithy_types::retry::ErrorKind> {
563        ::std::option::Option::None
564    }
565}
566impl ::aws_smithy_types::error::metadata::ProvideErrorMetadata for GetCommentsForPullRequestError {
567    fn meta(&self) -> &::aws_smithy_types::error::ErrorMetadata {
568        match self {
569            Self::CommitDoesNotExistException(_inner) => ::aws_smithy_types::error::metadata::ProvideErrorMetadata::meta(_inner),
570            Self::CommitIdRequiredException(_inner) => ::aws_smithy_types::error::metadata::ProvideErrorMetadata::meta(_inner),
571            Self::EncryptionIntegrityChecksFailedException(_inner) => ::aws_smithy_types::error::metadata::ProvideErrorMetadata::meta(_inner),
572            Self::EncryptionKeyAccessDeniedException(_inner) => ::aws_smithy_types::error::metadata::ProvideErrorMetadata::meta(_inner),
573            Self::EncryptionKeyDisabledException(_inner) => ::aws_smithy_types::error::metadata::ProvideErrorMetadata::meta(_inner),
574            Self::EncryptionKeyNotFoundException(_inner) => ::aws_smithy_types::error::metadata::ProvideErrorMetadata::meta(_inner),
575            Self::EncryptionKeyUnavailableException(_inner) => ::aws_smithy_types::error::metadata::ProvideErrorMetadata::meta(_inner),
576            Self::InvalidCommitIdException(_inner) => ::aws_smithy_types::error::metadata::ProvideErrorMetadata::meta(_inner),
577            Self::InvalidContinuationTokenException(_inner) => ::aws_smithy_types::error::metadata::ProvideErrorMetadata::meta(_inner),
578            Self::InvalidMaxResultsException(_inner) => ::aws_smithy_types::error::metadata::ProvideErrorMetadata::meta(_inner),
579            Self::InvalidPullRequestIdException(_inner) => ::aws_smithy_types::error::metadata::ProvideErrorMetadata::meta(_inner),
580            Self::InvalidRepositoryNameException(_inner) => ::aws_smithy_types::error::metadata::ProvideErrorMetadata::meta(_inner),
581            Self::PullRequestDoesNotExistException(_inner) => ::aws_smithy_types::error::metadata::ProvideErrorMetadata::meta(_inner),
582            Self::PullRequestIdRequiredException(_inner) => ::aws_smithy_types::error::metadata::ProvideErrorMetadata::meta(_inner),
583            Self::RepositoryDoesNotExistException(_inner) => ::aws_smithy_types::error::metadata::ProvideErrorMetadata::meta(_inner),
584            Self::RepositoryNameRequiredException(_inner) => ::aws_smithy_types::error::metadata::ProvideErrorMetadata::meta(_inner),
585            Self::RepositoryNotAssociatedWithPullRequestException(_inner) => ::aws_smithy_types::error::metadata::ProvideErrorMetadata::meta(_inner),
586            Self::Unhandled(_inner) => &_inner.meta,
587        }
588    }
589}
590impl ::aws_smithy_runtime_api::client::result::CreateUnhandledError for GetCommentsForPullRequestError {
591    fn create_unhandled_error(
592        source: ::std::boxed::Box<dyn ::std::error::Error + ::std::marker::Send + ::std::marker::Sync + 'static>,
593        meta: ::std::option::Option<::aws_smithy_types::error::ErrorMetadata>,
594    ) -> Self {
595        Self::Unhandled(crate::error::sealed_unhandled::Unhandled {
596            source,
597            meta: meta.unwrap_or_default(),
598        })
599    }
600}
601impl ::aws_types::request_id::RequestId for crate::operation::get_comments_for_pull_request::GetCommentsForPullRequestError {
602    fn request_id(&self) -> Option<&str> {
603        self.meta().request_id()
604    }
605}
606
607pub use crate::operation::get_comments_for_pull_request::_get_comments_for_pull_request_input::GetCommentsForPullRequestInput;
608
609pub use crate::operation::get_comments_for_pull_request::_get_comments_for_pull_request_output::GetCommentsForPullRequestOutput;
610
611mod _get_comments_for_pull_request_input;
612
613mod _get_comments_for_pull_request_output;
614
615/// Builders
616pub mod builders;
617
618/// Paginator for this operation
619pub mod paginator;
aws_sdk_codecommit/operation/get_comments_for_pull_request.rs

aws_sdk_codecommit/operation/
get_comments_for_pull_request.rs
