// Code generated by software.amazon.smithy.rust.codegen.smithy-rs. DO NOT EDIT.
pub use crate::operation::merge_pull_request_by_squash::_merge_pull_request_by_squash_output::MergePullRequestBySquashOutputBuilder;

pub use crate::operation::merge_pull_request_by_squash::_merge_pull_request_by_squash_input::MergePullRequestBySquashInputBuilder;

impl MergePullRequestBySquashInputBuilder {
    /// Sends a request with this input using the given client.
    pub async fn send_with(
        self,
        client: &crate::Client,
    ) -> ::std::result::Result<
        crate::operation::merge_pull_request_by_squash::MergePullRequestBySquashOutput,
        ::aws_smithy_http::result::SdkError<
            crate::operation::merge_pull_request_by_squash::MergePullRequestBySquashError,
            ::aws_smithy_runtime_api::client::orchestrator::HttpResponse,
        >,
    > {
        let mut fluent_builder = client.merge_pull_request_by_squash();
        fluent_builder.inner = self;
        fluent_builder.send().await
    }
}
/// Fluent builder constructing a request to `MergePullRequestBySquash`.
///
/// <p>Attempts to merge the source commit of a pull request into the specified destination branch for that pull request at the specified commit using the squash merge strategy. If the merge is successful, it closes the pull request.</p>
#[derive(::std::clone::Clone, ::std::fmt::Debug)]
pub struct MergePullRequestBySquashFluentBuilder {
    handle: ::std::sync::Arc<crate::client::Handle>,
    inner: crate::operation::merge_pull_request_by_squash::builders::MergePullRequestBySquashInputBuilder,
    config_override: ::std::option::Option<crate::config::Builder>,
}
impl
    crate::client::customize::internal::CustomizableSend<
        crate::operation::merge_pull_request_by_squash::MergePullRequestBySquashOutput,
        crate::operation::merge_pull_request_by_squash::MergePullRequestBySquashError,
    > for MergePullRequestBySquashFluentBuilder
{
    fn send(
        self,
        config_override: crate::config::Builder,
    ) -> crate::client::customize::internal::BoxFuture<
        crate::client::customize::internal::SendResult<
            crate::operation::merge_pull_request_by_squash::MergePullRequestBySquashOutput,
            crate::operation::merge_pull_request_by_squash::MergePullRequestBySquashError,
        >,
    > {
        ::std::boxed::Box::pin(async move { self.config_override(config_override).send().await })
    }
}
impl MergePullRequestBySquashFluentBuilder {
    /// Creates a new `MergePullRequestBySquash`.
    pub(crate) fn new(handle: ::std::sync::Arc<crate::client::Handle>) -> Self {
        Self {
            handle,
            inner: ::std::default::Default::default(),
            config_override: ::std::option::Option::None,
        }
    }
    /// Access the MergePullRequestBySquash as a reference.
    pub fn as_input(&self) -> &crate::operation::merge_pull_request_by_squash::builders::MergePullRequestBySquashInputBuilder {
        &self.inner
    }
    /// Sends the request and returns the response.
    ///
    /// If an error occurs, an `SdkError` will be returned with additional details that
    /// can be matched against.
    ///
    /// By default, any retryable failures will be retried twice. Retry behavior
    /// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
    /// set when configuring the client.
    pub async fn send(
        self,
    ) -> ::std::result::Result<
        crate::operation::merge_pull_request_by_squash::MergePullRequestBySquashOutput,
        ::aws_smithy_http::result::SdkError<
            crate::operation::merge_pull_request_by_squash::MergePullRequestBySquashError,
            ::aws_smithy_runtime_api::client::orchestrator::HttpResponse,
        >,
    > {
        let input = self.inner.build().map_err(::aws_smithy_http::result::SdkError::construction_failure)?;
        let runtime_plugins = crate::operation::merge_pull_request_by_squash::MergePullRequestBySquash::operation_runtime_plugins(
            self.handle.runtime_plugins.clone(),
            &self.handle.conf,
            self.config_override,
        );
        crate::operation::merge_pull_request_by_squash::MergePullRequestBySquash::orchestrate(&runtime_plugins, input).await
    }

    /// Consumes this builder, creating a customizable operation that can be modified before being
    /// sent.
    // TODO(enableNewSmithyRuntimeCleanup): Remove `async` and `Result` once we switch to orchestrator
    pub async fn customize(
        self,
    ) -> ::std::result::Result<
        crate::client::customize::orchestrator::CustomizableOperation<
            crate::operation::merge_pull_request_by_squash::MergePullRequestBySquashOutput,
            crate::operation::merge_pull_request_by_squash::MergePullRequestBySquashError,
            Self,
        >,
        ::aws_smithy_http::result::SdkError<crate::operation::merge_pull_request_by_squash::MergePullRequestBySquashError>,
    > {
        ::std::result::Result::Ok(crate::client::customize::orchestrator::CustomizableOperation::new(self))
    }
    pub(crate) fn config_override(mut self, config_override: impl Into<crate::config::Builder>) -> Self {
        self.set_config_override(Some(config_override.into()));
        self
    }

    pub(crate) fn set_config_override(&mut self, config_override: Option<crate::config::Builder>) -> &mut Self {
        self.config_override = config_override;
        self
    }
    /// <p>The system-generated ID of the pull request. To get this ID, use <code>ListPullRequests</code>.</p>
    pub fn pull_request_id(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
        self.inner = self.inner.pull_request_id(input.into());
        self
    }
    /// <p>The system-generated ID of the pull request. To get this ID, use <code>ListPullRequests</code>.</p>
    pub fn set_pull_request_id(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
        self.inner = self.inner.set_pull_request_id(input);
        self
    }
    /// <p>The system-generated ID of the pull request. To get this ID, use <code>ListPullRequests</code>.</p>
    pub fn get_pull_request_id(&self) -> &::std::option::Option<::std::string::String> {
        self.inner.get_pull_request_id()
    }
    /// <p>The name of the repository where the pull request was created.</p>
    pub fn repository_name(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
        self.inner = self.inner.repository_name(input.into());
        self
    }
    /// <p>The name of the repository where the pull request was created.</p>
    pub fn set_repository_name(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
        self.inner = self.inner.set_repository_name(input);
        self
    }
    /// <p>The name of the repository where the pull request was created.</p>
    pub fn get_repository_name(&self) -> &::std::option::Option<::std::string::String> {
        self.inner.get_repository_name()
    }
    /// <p>The full commit ID of the original or updated commit in the pull request source branch. Pass this value if you want an exception thrown if the current commit ID of the tip of the source branch does not match this commit ID.</p>
    pub fn source_commit_id(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
        self.inner = self.inner.source_commit_id(input.into());
        self
    }
    /// <p>The full commit ID of the original or updated commit in the pull request source branch. Pass this value if you want an exception thrown if the current commit ID of the tip of the source branch does not match this commit ID.</p>
    pub fn set_source_commit_id(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
        self.inner = self.inner.set_source_commit_id(input);
        self
    }
    /// <p>The full commit ID of the original or updated commit in the pull request source branch. Pass this value if you want an exception thrown if the current commit ID of the tip of the source branch does not match this commit ID.</p>
    pub fn get_source_commit_id(&self) -> &::std::option::Option<::std::string::String> {
        self.inner.get_source_commit_id()
    }
    /// <p>The level of conflict detail to use. If unspecified, the default FILE_LEVEL is used, which returns a not-mergeable result if the same file has differences in both branches. If LINE_LEVEL is specified, a conflict is considered not mergeable if the same file in both branches has differences on the same line.</p>
    pub fn conflict_detail_level(mut self, input: crate::types::ConflictDetailLevelTypeEnum) -> Self {
        self.inner = self.inner.conflict_detail_level(input);
        self
    }
    /// <p>The level of conflict detail to use. If unspecified, the default FILE_LEVEL is used, which returns a not-mergeable result if the same file has differences in both branches. If LINE_LEVEL is specified, a conflict is considered not mergeable if the same file in both branches has differences on the same line.</p>
    pub fn set_conflict_detail_level(mut self, input: ::std::option::Option<crate::types::ConflictDetailLevelTypeEnum>) -> Self {
        self.inner = self.inner.set_conflict_detail_level(input);
        self
    }
    /// <p>The level of conflict detail to use. If unspecified, the default FILE_LEVEL is used, which returns a not-mergeable result if the same file has differences in both branches. If LINE_LEVEL is specified, a conflict is considered not mergeable if the same file in both branches has differences on the same line.</p>
    pub fn get_conflict_detail_level(&self) -> &::std::option::Option<crate::types::ConflictDetailLevelTypeEnum> {
        self.inner.get_conflict_detail_level()
    }
    /// <p>Specifies which branch to use when resolving conflicts, or whether to attempt automatically merging two versions of a file. The default is NONE, which requires any conflicts to be resolved manually before the merge operation is successful.</p>
    pub fn conflict_resolution_strategy(mut self, input: crate::types::ConflictResolutionStrategyTypeEnum) -> Self {
        self.inner = self.inner.conflict_resolution_strategy(input);
        self
    }
    /// <p>Specifies which branch to use when resolving conflicts, or whether to attempt automatically merging two versions of a file. The default is NONE, which requires any conflicts to be resolved manually before the merge operation is successful.</p>
    pub fn set_conflict_resolution_strategy(mut self, input: ::std::option::Option<crate::types::ConflictResolutionStrategyTypeEnum>) -> Self {
        self.inner = self.inner.set_conflict_resolution_strategy(input);
        self
    }
    /// <p>Specifies which branch to use when resolving conflicts, or whether to attempt automatically merging two versions of a file. The default is NONE, which requires any conflicts to be resolved manually before the merge operation is successful.</p>
    pub fn get_conflict_resolution_strategy(&self) -> &::std::option::Option<crate::types::ConflictResolutionStrategyTypeEnum> {
        self.inner.get_conflict_resolution_strategy()
    }
    /// <p>The commit message to include in the commit information for the merge.</p>
    pub fn commit_message(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
        self.inner = self.inner.commit_message(input.into());
        self
    }
    /// <p>The commit message to include in the commit information for the merge.</p>
    pub fn set_commit_message(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
        self.inner = self.inner.set_commit_message(input);
        self
    }
    /// <p>The commit message to include in the commit information for the merge.</p>
    pub fn get_commit_message(&self) -> &::std::option::Option<::std::string::String> {
        self.inner.get_commit_message()
    }
    /// <p>The name of the author who created the commit. This information is used as both the author and committer for the commit.</p>
    pub fn author_name(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
        self.inner = self.inner.author_name(input.into());
        self
    }
    /// <p>The name of the author who created the commit. This information is used as both the author and committer for the commit.</p>
    pub fn set_author_name(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
        self.inner = self.inner.set_author_name(input);
        self
    }
    /// <p>The name of the author who created the commit. This information is used as both the author and committer for the commit.</p>
    pub fn get_author_name(&self) -> &::std::option::Option<::std::string::String> {
        self.inner.get_author_name()
    }
    /// <p>The email address of the person merging the branches. This information is used in the commit information for the merge.</p>
    pub fn email(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
        self.inner = self.inner.email(input.into());
        self
    }
    /// <p>The email address of the person merging the branches. This information is used in the commit information for the merge.</p>
    pub fn set_email(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
        self.inner = self.inner.set_email(input);
        self
    }
    /// <p>The email address of the person merging the branches. This information is used in the commit information for the merge.</p>
    pub fn get_email(&self) -> &::std::option::Option<::std::string::String> {
        self.inner.get_email()
    }
    /// <p>If the commit contains deletions, whether to keep a folder or folder structure if the changes leave the folders empty. If true, a .gitkeep file is created for empty folders. The default is false.</p>
    pub fn keep_empty_folders(mut self, input: bool) -> Self {
        self.inner = self.inner.keep_empty_folders(input);
        self
    }
    /// <p>If the commit contains deletions, whether to keep a folder or folder structure if the changes leave the folders empty. If true, a .gitkeep file is created for empty folders. The default is false.</p>
    pub fn set_keep_empty_folders(mut self, input: ::std::option::Option<bool>) -> Self {
        self.inner = self.inner.set_keep_empty_folders(input);
        self
    }
    /// <p>If the commit contains deletions, whether to keep a folder or folder structure if the changes leave the folders empty. If true, a .gitkeep file is created for empty folders. The default is false.</p>
    pub fn get_keep_empty_folders(&self) -> &::std::option::Option<bool> {
        self.inner.get_keep_empty_folders()
    }
    /// <p>If AUTOMERGE is the conflict resolution strategy, a list of inputs to use when resolving conflicts during a merge.</p>
    pub fn conflict_resolution(mut self, input: crate::types::ConflictResolution) -> Self {
        self.inner = self.inner.conflict_resolution(input);
        self
    }
    /// <p>If AUTOMERGE is the conflict resolution strategy, a list of inputs to use when resolving conflicts during a merge.</p>
    pub fn set_conflict_resolution(mut self, input: ::std::option::Option<crate::types::ConflictResolution>) -> Self {
        self.inner = self.inner.set_conflict_resolution(input);
        self
    }
    /// <p>If AUTOMERGE is the conflict resolution strategy, a list of inputs to use when resolving conflicts during a merge.</p>
    pub fn get_conflict_resolution(&self) -> &::std::option::Option<crate::types::ConflictResolution> {
        self.inner.get_conflict_resolution()
    }
}