// Code generated by software.amazon.smithy.rust.codegen.smithy-rs. DO NOT EDIT.
pub use crate::operation::get_report_group_trend::_get_report_group_trend_output::GetReportGroupTrendOutputBuilder;

pub use crate::operation::get_report_group_trend::_get_report_group_trend_input::GetReportGroupTrendInputBuilder;

impl GetReportGroupTrendInputBuilder {
    /// Sends a request with this input using the given client.
    pub async fn send_with(
        self,
        client: &crate::Client,
    ) -> ::std::result::Result<
        crate::operation::get_report_group_trend::GetReportGroupTrendOutput,
        ::aws_smithy_runtime_api::client::result::SdkError<
            crate::operation::get_report_group_trend::GetReportGroupTrendError,
            ::aws_smithy_runtime_api::client::orchestrator::HttpResponse,
        >,
    > {
        let mut fluent_builder = client.get_report_group_trend();
        fluent_builder.inner = self;
        fluent_builder.send().await
    }
}
/// Fluent builder constructing a request to `GetReportGroupTrend`.
///
/// <p>Analyzes and accumulates test report values for the specified test reports.</p>
#[derive(::std::clone::Clone, ::std::fmt::Debug)]
pub struct GetReportGroupTrendFluentBuilder {
    handle: ::std::sync::Arc<crate::client::Handle>,
    inner: crate::operation::get_report_group_trend::builders::GetReportGroupTrendInputBuilder,
    config_override: ::std::option::Option<crate::config::Builder>,
}
impl
    crate::client::customize::internal::CustomizableSend<
        crate::operation::get_report_group_trend::GetReportGroupTrendOutput,
        crate::operation::get_report_group_trend::GetReportGroupTrendError,
    > for GetReportGroupTrendFluentBuilder
{
    fn send(
        self,
        config_override: crate::config::Builder,
    ) -> crate::client::customize::internal::BoxFuture<
        crate::client::customize::internal::SendResult<
            crate::operation::get_report_group_trend::GetReportGroupTrendOutput,
            crate::operation::get_report_group_trend::GetReportGroupTrendError,
        >,
    > {
        ::std::boxed::Box::pin(async move { self.config_override(config_override).send().await })
    }
}
impl GetReportGroupTrendFluentBuilder {
    /// Creates a new `GetReportGroupTrend`.
    pub(crate) fn new(handle: ::std::sync::Arc<crate::client::Handle>) -> Self {
        Self {
            handle,
            inner: ::std::default::Default::default(),
            config_override: ::std::option::Option::None,
        }
    }
    /// Access the GetReportGroupTrend as a reference.
    pub fn as_input(&self) -> &crate::operation::get_report_group_trend::builders::GetReportGroupTrendInputBuilder {
        &self.inner
    }
    /// Sends the request and returns the response.
    ///
    /// If an error occurs, an `SdkError` will be returned with additional details that
    /// can be matched against.
    ///
    /// By default, any retryable failures will be retried twice. Retry behavior
    /// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
    /// set when configuring the client.
    pub async fn send(
        self,
    ) -> ::std::result::Result<
        crate::operation::get_report_group_trend::GetReportGroupTrendOutput,
        ::aws_smithy_runtime_api::client::result::SdkError<
            crate::operation::get_report_group_trend::GetReportGroupTrendError,
            ::aws_smithy_runtime_api::client::orchestrator::HttpResponse,
        >,
    > {
        let input = self
            .inner
            .build()
            .map_err(::aws_smithy_runtime_api::client::result::SdkError::construction_failure)?;
        let runtime_plugins = crate::operation::get_report_group_trend::GetReportGroupTrend::operation_runtime_plugins(
            self.handle.runtime_plugins.clone(),
            &self.handle.conf,
            self.config_override,
        );
        crate::operation::get_report_group_trend::GetReportGroupTrend::orchestrate(&runtime_plugins, input).await
    }

    /// Consumes this builder, creating a customizable operation that can be modified before being sent.
    pub fn customize(
        self,
    ) -> crate::client::customize::CustomizableOperation<
        crate::operation::get_report_group_trend::GetReportGroupTrendOutput,
        crate::operation::get_report_group_trend::GetReportGroupTrendError,
        Self,
    > {
        crate::client::customize::CustomizableOperation::new(self)
    }
    pub(crate) fn config_override(mut self, config_override: impl Into<crate::config::Builder>) -> Self {
        self.set_config_override(Some(config_override.into()));
        self
    }

    pub(crate) fn set_config_override(&mut self, config_override: Option<crate::config::Builder>) -> &mut Self {
        self.config_override = config_override;
        self
    }
    /// <p>The ARN of the report group that contains the reports to analyze.</p>
    pub fn report_group_arn(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
        self.inner = self.inner.report_group_arn(input.into());
        self
    }
    /// <p>The ARN of the report group that contains the reports to analyze.</p>
    pub fn set_report_group_arn(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
        self.inner = self.inner.set_report_group_arn(input);
        self
    }
    /// <p>The ARN of the report group that contains the reports to analyze.</p>
    pub fn get_report_group_arn(&self) -> &::std::option::Option<::std::string::String> {
        self.inner.get_report_group_arn()
    }
    /// <p>The number of reports to analyze. This operation always retrieves the most recent reports.</p>
    /// <p>If this parameter is omitted, the most recent 100 reports are analyzed.</p>
    pub fn num_of_reports(mut self, input: i32) -> Self {
        self.inner = self.inner.num_of_reports(input);
        self
    }
    /// <p>The number of reports to analyze. This operation always retrieves the most recent reports.</p>
    /// <p>If this parameter is omitted, the most recent 100 reports are analyzed.</p>
    pub fn set_num_of_reports(mut self, input: ::std::option::Option<i32>) -> Self {
        self.inner = self.inner.set_num_of_reports(input);
        self
    }
    /// <p>The number of reports to analyze. This operation always retrieves the most recent reports.</p>
    /// <p>If this parameter is omitted, the most recent 100 reports are analyzed.</p>
    pub fn get_num_of_reports(&self) -> &::std::option::Option<i32> {
        self.inner.get_num_of_reports()
    }
    /// <p>The test report value to accumulate. This must be one of the following values:</p>
    /// <dl>
    /// <dt>
    /// Test reports:
    /// </dt>
    /// <dd>
    /// <dl>
    /// <dt>
    /// DURATION
    /// </dt>
    /// <dd>
    /// <p>Accumulate the test run times for the specified reports.</p>
    /// </dd>
    /// <dt>
    /// PASS_RATE
    /// </dt>
    /// <dd>
    /// <p>Accumulate the percentage of tests that passed for the specified test reports.</p>
    /// </dd>
    /// <dt>
    /// TOTAL
    /// </dt>
    /// <dd>
    /// <p>Accumulate the total number of tests for the specified test reports.</p>
    /// </dd>
    /// </dl>
    /// </dd>
    /// </dl>
    /// <dl>
    /// <dt>
    /// Code coverage reports:
    /// </dt>
    /// <dd>
    /// <dl>
    /// <dt>
    /// BRANCH_COVERAGE
    /// </dt>
    /// <dd>
    /// <p>Accumulate the branch coverage percentages for the specified test reports.</p>
    /// </dd>
    /// <dt>
    /// BRANCHES_COVERED
    /// </dt>
    /// <dd>
    /// <p>Accumulate the branches covered values for the specified test reports.</p>
    /// </dd>
    /// <dt>
    /// BRANCHES_MISSED
    /// </dt>
    /// <dd>
    /// <p>Accumulate the branches missed values for the specified test reports.</p>
    /// </dd>
    /// <dt>
    /// LINE_COVERAGE
    /// </dt>
    /// <dd>
    /// <p>Accumulate the line coverage percentages for the specified test reports.</p>
    /// </dd>
    /// <dt>
    /// LINES_COVERED
    /// </dt>
    /// <dd>
    /// <p>Accumulate the lines covered values for the specified test reports.</p>
    /// </dd>
    /// <dt>
    /// LINES_MISSED
    /// </dt>
    /// <dd>
    /// <p>Accumulate the lines not covered values for the specified test reports.</p>
    /// </dd>
    /// </dl>
    /// </dd>
    /// </dl>
    pub fn trend_field(mut self, input: crate::types::ReportGroupTrendFieldType) -> Self {
        self.inner = self.inner.trend_field(input);
        self
    }
    /// <p>The test report value to accumulate. This must be one of the following values:</p>
    /// <dl>
    /// <dt>
    /// Test reports:
    /// </dt>
    /// <dd>
    /// <dl>
    /// <dt>
    /// DURATION
    /// </dt>
    /// <dd>
    /// <p>Accumulate the test run times for the specified reports.</p>
    /// </dd>
    /// <dt>
    /// PASS_RATE
    /// </dt>
    /// <dd>
    /// <p>Accumulate the percentage of tests that passed for the specified test reports.</p>
    /// </dd>
    /// <dt>
    /// TOTAL
    /// </dt>
    /// <dd>
    /// <p>Accumulate the total number of tests for the specified test reports.</p>
    /// </dd>
    /// </dl>
    /// </dd>
    /// </dl>
    /// <dl>
    /// <dt>
    /// Code coverage reports:
    /// </dt>
    /// <dd>
    /// <dl>
    /// <dt>
    /// BRANCH_COVERAGE
    /// </dt>
    /// <dd>
    /// <p>Accumulate the branch coverage percentages for the specified test reports.</p>
    /// </dd>
    /// <dt>
    /// BRANCHES_COVERED
    /// </dt>
    /// <dd>
    /// <p>Accumulate the branches covered values for the specified test reports.</p>
    /// </dd>
    /// <dt>
    /// BRANCHES_MISSED
    /// </dt>
    /// <dd>
    /// <p>Accumulate the branches missed values for the specified test reports.</p>
    /// </dd>
    /// <dt>
    /// LINE_COVERAGE
    /// </dt>
    /// <dd>
    /// <p>Accumulate the line coverage percentages for the specified test reports.</p>
    /// </dd>
    /// <dt>
    /// LINES_COVERED
    /// </dt>
    /// <dd>
    /// <p>Accumulate the lines covered values for the specified test reports.</p>
    /// </dd>
    /// <dt>
    /// LINES_MISSED
    /// </dt>
    /// <dd>
    /// <p>Accumulate the lines not covered values for the specified test reports.</p>
    /// </dd>
    /// </dl>
    /// </dd>
    /// </dl>
    pub fn set_trend_field(mut self, input: ::std::option::Option<crate::types::ReportGroupTrendFieldType>) -> Self {
        self.inner = self.inner.set_trend_field(input);
        self
    }
    /// <p>The test report value to accumulate. This must be one of the following values:</p>
    /// <dl>
    /// <dt>
    /// Test reports:
    /// </dt>
    /// <dd>
    /// <dl>
    /// <dt>
    /// DURATION
    /// </dt>
    /// <dd>
    /// <p>Accumulate the test run times for the specified reports.</p>
    /// </dd>
    /// <dt>
    /// PASS_RATE
    /// </dt>
    /// <dd>
    /// <p>Accumulate the percentage of tests that passed for the specified test reports.</p>
    /// </dd>
    /// <dt>
    /// TOTAL
    /// </dt>
    /// <dd>
    /// <p>Accumulate the total number of tests for the specified test reports.</p>
    /// </dd>
    /// </dl>
    /// </dd>
    /// </dl>
    /// <dl>
    /// <dt>
    /// Code coverage reports:
    /// </dt>
    /// <dd>
    /// <dl>
    /// <dt>
    /// BRANCH_COVERAGE
    /// </dt>
    /// <dd>
    /// <p>Accumulate the branch coverage percentages for the specified test reports.</p>
    /// </dd>
    /// <dt>
    /// BRANCHES_COVERED
    /// </dt>
    /// <dd>
    /// <p>Accumulate the branches covered values for the specified test reports.</p>
    /// </dd>
    /// <dt>
    /// BRANCHES_MISSED
    /// </dt>
    /// <dd>
    /// <p>Accumulate the branches missed values for the specified test reports.</p>
    /// </dd>
    /// <dt>
    /// LINE_COVERAGE
    /// </dt>
    /// <dd>
    /// <p>Accumulate the line coverage percentages for the specified test reports.</p>
    /// </dd>
    /// <dt>
    /// LINES_COVERED
    /// </dt>
    /// <dd>
    /// <p>Accumulate the lines covered values for the specified test reports.</p>
    /// </dd>
    /// <dt>
    /// LINES_MISSED
    /// </dt>
    /// <dd>
    /// <p>Accumulate the lines not covered values for the specified test reports.</p>
    /// </dd>
    /// </dl>
    /// </dd>
    /// </dl>
    pub fn get_trend_field(&self) -> &::std::option::Option<crate::types::ReportGroupTrendFieldType> {
        self.inner.get_trend_field()
    }
}