// Code generated by software.amazon.smithy.rust.codegen.smithy-rs. DO NOT EDIT.
pub use crate::operation::start_backup_job::_start_backup_job_output::StartBackupJobOutputBuilder;

pub use crate::operation::start_backup_job::_start_backup_job_input::StartBackupJobInputBuilder;

impl StartBackupJobInputBuilder {
    /// Sends a request with this input using the given client.
    pub async fn send_with(
        self,
        client: &crate::Client,
    ) -> ::std::result::Result<
        crate::operation::start_backup_job::StartBackupJobOutput,
        ::aws_smithy_runtime_api::client::result::SdkError<
            crate::operation::start_backup_job::StartBackupJobError,
            ::aws_smithy_runtime_api::client::orchestrator::HttpResponse,
        >,
    > {
        let mut fluent_builder = client.start_backup_job();
        fluent_builder.inner = self;
        fluent_builder.send().await
    }
}
/// Fluent builder constructing a request to `StartBackupJob`.
///
/// <p>Starts an on-demand backup job for the specified resource.</p>
#[derive(::std::clone::Clone, ::std::fmt::Debug)]
pub struct StartBackupJobFluentBuilder {
    handle: ::std::sync::Arc<crate::client::Handle>,
    inner: crate::operation::start_backup_job::builders::StartBackupJobInputBuilder,
    config_override: ::std::option::Option<crate::config::Builder>,
}
impl
    crate::client::customize::internal::CustomizableSend<
        crate::operation::start_backup_job::StartBackupJobOutput,
        crate::operation::start_backup_job::StartBackupJobError,
    > for StartBackupJobFluentBuilder
{
    fn send(
        self,
        config_override: crate::config::Builder,
    ) -> crate::client::customize::internal::BoxFuture<
        crate::client::customize::internal::SendResult<
            crate::operation::start_backup_job::StartBackupJobOutput,
            crate::operation::start_backup_job::StartBackupJobError,
        >,
    > {
        ::std::boxed::Box::pin(async move { self.config_override(config_override).send().await })
    }
}
impl StartBackupJobFluentBuilder {
    /// Creates a new `StartBackupJob`.
    pub(crate) fn new(handle: ::std::sync::Arc<crate::client::Handle>) -> Self {
        Self {
            handle,
            inner: ::std::default::Default::default(),
            config_override: ::std::option::Option::None,
        }
    }
    /// Access the StartBackupJob as a reference.
    pub fn as_input(&self) -> &crate::operation::start_backup_job::builders::StartBackupJobInputBuilder {
        &self.inner
    }
    /// Sends the request and returns the response.
    ///
    /// If an error occurs, an `SdkError` will be returned with additional details that
    /// can be matched against.
    ///
    /// By default, any retryable failures will be retried twice. Retry behavior
    /// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
    /// set when configuring the client.
    pub async fn send(
        self,
    ) -> ::std::result::Result<
        crate::operation::start_backup_job::StartBackupJobOutput,
        ::aws_smithy_runtime_api::client::result::SdkError<
            crate::operation::start_backup_job::StartBackupJobError,
            ::aws_smithy_runtime_api::client::orchestrator::HttpResponse,
        >,
    > {
        let input = self
            .inner
            .build()
            .map_err(::aws_smithy_runtime_api::client::result::SdkError::construction_failure)?;
        let runtime_plugins = crate::operation::start_backup_job::StartBackupJob::operation_runtime_plugins(
            self.handle.runtime_plugins.clone(),
            &self.handle.conf,
            self.config_override,
        );
        crate::operation::start_backup_job::StartBackupJob::orchestrate(&runtime_plugins, input).await
    }

    /// Consumes this builder, creating a customizable operation that can be modified before being sent.
    pub fn customize(
        self,
    ) -> crate::client::customize::CustomizableOperation<
        crate::operation::start_backup_job::StartBackupJobOutput,
        crate::operation::start_backup_job::StartBackupJobError,
        Self,
    > {
        crate::client::customize::CustomizableOperation::new(self)
    }
    pub(crate) fn config_override(mut self, config_override: impl Into<crate::config::Builder>) -> Self {
        self.set_config_override(Some(config_override.into()));
        self
    }

    pub(crate) fn set_config_override(&mut self, config_override: Option<crate::config::Builder>) -> &mut Self {
        self.config_override = config_override;
        self
    }
    /// <p>The name of a logical container where backups are stored. Backup vaults are identified by names that are unique to the account used to create them and the Amazon Web Services Region where they are created. They consist of lowercase letters, numbers, and hyphens.</p>
    pub fn backup_vault_name(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
        self.inner = self.inner.backup_vault_name(input.into());
        self
    }
    /// <p>The name of a logical container where backups are stored. Backup vaults are identified by names that are unique to the account used to create them and the Amazon Web Services Region where they are created. They consist of lowercase letters, numbers, and hyphens.</p>
    pub fn set_backup_vault_name(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
        self.inner = self.inner.set_backup_vault_name(input);
        self
    }
    /// <p>The name of a logical container where backups are stored. Backup vaults are identified by names that are unique to the account used to create them and the Amazon Web Services Region where they are created. They consist of lowercase letters, numbers, and hyphens.</p>
    pub fn get_backup_vault_name(&self) -> &::std::option::Option<::std::string::String> {
        self.inner.get_backup_vault_name()
    }
    /// <p>An Amazon Resource Name (ARN) that uniquely identifies a resource. The format of the ARN depends on the resource type.</p>
    pub fn resource_arn(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
        self.inner = self.inner.resource_arn(input.into());
        self
    }
    /// <p>An Amazon Resource Name (ARN) that uniquely identifies a resource. The format of the ARN depends on the resource type.</p>
    pub fn set_resource_arn(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
        self.inner = self.inner.set_resource_arn(input);
        self
    }
    /// <p>An Amazon Resource Name (ARN) that uniquely identifies a resource. The format of the ARN depends on the resource type.</p>
    pub fn get_resource_arn(&self) -> &::std::option::Option<::std::string::String> {
        self.inner.get_resource_arn()
    }
    /// <p>Specifies the IAM role ARN used to create the target recovery point; for example, <code>arn:aws:iam::123456789012:role/S3Access</code>.</p>
    pub fn iam_role_arn(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
        self.inner = self.inner.iam_role_arn(input.into());
        self
    }
    /// <p>Specifies the IAM role ARN used to create the target recovery point; for example, <code>arn:aws:iam::123456789012:role/S3Access</code>.</p>
    pub fn set_iam_role_arn(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
        self.inner = self.inner.set_iam_role_arn(input);
        self
    }
    /// <p>Specifies the IAM role ARN used to create the target recovery point; for example, <code>arn:aws:iam::123456789012:role/S3Access</code>.</p>
    pub fn get_iam_role_arn(&self) -> &::std::option::Option<::std::string::String> {
        self.inner.get_iam_role_arn()
    }
    /// <p>A customer-chosen string that you can use to distinguish between otherwise identical calls to <code>StartBackupJob</code>. Retrying a successful request with the same idempotency token results in a success message with no action taken.</p>
    pub fn idempotency_token(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
        self.inner = self.inner.idempotency_token(input.into());
        self
    }
    /// <p>A customer-chosen string that you can use to distinguish between otherwise identical calls to <code>StartBackupJob</code>. Retrying a successful request with the same idempotency token results in a success message with no action taken.</p>
    pub fn set_idempotency_token(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
        self.inner = self.inner.set_idempotency_token(input);
        self
    }
    /// <p>A customer-chosen string that you can use to distinguish between otherwise identical calls to <code>StartBackupJob</code>. Retrying a successful request with the same idempotency token results in a success message with no action taken.</p>
    pub fn get_idempotency_token(&self) -> &::std::option::Option<::std::string::String> {
        self.inner.get_idempotency_token()
    }
    /// <p>A value in minutes after a backup is scheduled before a job will be canceled if it doesn't start successfully. This value is optional, and the default is 8 hours. If this value is included, it must be at least 60 minutes to avoid errors.</p>
    /// <p>This parameter has a maximum value of 100 years (52,560,000 minutes).</p>
    /// <p>During the start window, the backup job status remains in <code>CREATED</code> status until it has successfully begun or until the start window time has run out. If within the start window time Backup receives an error that allows the job to be retried, Backup will automatically retry to begin the job at least every 10 minutes until the backup successfully begins (the job status changes to <code>RUNNING</code>) or until the job status changes to <code>EXPIRED</code> (which is expected to occur when the start window time is over).</p>
    pub fn start_window_minutes(mut self, input: i64) -> Self {
        self.inner = self.inner.start_window_minutes(input);
        self
    }
    /// <p>A value in minutes after a backup is scheduled before a job will be canceled if it doesn't start successfully. This value is optional, and the default is 8 hours. If this value is included, it must be at least 60 minutes to avoid errors.</p>
    /// <p>This parameter has a maximum value of 100 years (52,560,000 minutes).</p>
    /// <p>During the start window, the backup job status remains in <code>CREATED</code> status until it has successfully begun or until the start window time has run out. If within the start window time Backup receives an error that allows the job to be retried, Backup will automatically retry to begin the job at least every 10 minutes until the backup successfully begins (the job status changes to <code>RUNNING</code>) or until the job status changes to <code>EXPIRED</code> (which is expected to occur when the start window time is over).</p>
    pub fn set_start_window_minutes(mut self, input: ::std::option::Option<i64>) -> Self {
        self.inner = self.inner.set_start_window_minutes(input);
        self
    }
    /// <p>A value in minutes after a backup is scheduled before a job will be canceled if it doesn't start successfully. This value is optional, and the default is 8 hours. If this value is included, it must be at least 60 minutes to avoid errors.</p>
    /// <p>This parameter has a maximum value of 100 years (52,560,000 minutes).</p>
    /// <p>During the start window, the backup job status remains in <code>CREATED</code> status until it has successfully begun or until the start window time has run out. If within the start window time Backup receives an error that allows the job to be retried, Backup will automatically retry to begin the job at least every 10 minutes until the backup successfully begins (the job status changes to <code>RUNNING</code>) or until the job status changes to <code>EXPIRED</code> (which is expected to occur when the start window time is over).</p>
    pub fn get_start_window_minutes(&self) -> &::std::option::Option<i64> {
        self.inner.get_start_window_minutes()
    }
    /// <p>A value in minutes during which a successfully started backup must complete, or else Backup will cancel the job. This value is optional. This value begins counting down from when the backup was scheduled. It does not add additional time for <code>StartWindowMinutes</code>, or if the backup started later than scheduled.</p>
    /// <p>Like <code>StartWindowMinutes</code>, this parameter has a maximum value of 100 years (52,560,000 minutes).</p>
    pub fn complete_window_minutes(mut self, input: i64) -> Self {
        self.inner = self.inner.complete_window_minutes(input);
        self
    }
    /// <p>A value in minutes during which a successfully started backup must complete, or else Backup will cancel the job. This value is optional. This value begins counting down from when the backup was scheduled. It does not add additional time for <code>StartWindowMinutes</code>, or if the backup started later than scheduled.</p>
    /// <p>Like <code>StartWindowMinutes</code>, this parameter has a maximum value of 100 years (52,560,000 minutes).</p>
    pub fn set_complete_window_minutes(mut self, input: ::std::option::Option<i64>) -> Self {
        self.inner = self.inner.set_complete_window_minutes(input);
        self
    }
    /// <p>A value in minutes during which a successfully started backup must complete, or else Backup will cancel the job. This value is optional. This value begins counting down from when the backup was scheduled. It does not add additional time for <code>StartWindowMinutes</code>, or if the backup started later than scheduled.</p>
    /// <p>Like <code>StartWindowMinutes</code>, this parameter has a maximum value of 100 years (52,560,000 minutes).</p>
    pub fn get_complete_window_minutes(&self) -> &::std::option::Option<i64> {
        self.inner.get_complete_window_minutes()
    }
    /// <p>The lifecycle defines when a protected resource is transitioned to cold storage and when it expires. Backup will transition and expire backups automatically according to the lifecycle that you define.</p>
    /// <p>Backups transitioned to cold storage must be stored in cold storage for a minimum of 90 days. Therefore, the “retention” setting must be 90 days greater than the “transition to cold after days” setting. The “transition to cold after days” setting cannot be changed after a backup has been transitioned to cold.</p>
    /// <p>Resource types that are able to be transitioned to cold storage are listed in the "Lifecycle to cold storage" section of the <a href="https://docs.aws.amazon.com/aws-backup/latest/devguide/whatisbackup.html#features-by-resource"> Feature availability by resource</a> table. Backup ignores this expression for other resource types.</p>
    /// <p>This parameter has a maximum value of 100 years (36,500 days).</p>
    pub fn lifecycle(mut self, input: crate::types::Lifecycle) -> Self {
        self.inner = self.inner.lifecycle(input);
        self
    }
    /// <p>The lifecycle defines when a protected resource is transitioned to cold storage and when it expires. Backup will transition and expire backups automatically according to the lifecycle that you define.</p>
    /// <p>Backups transitioned to cold storage must be stored in cold storage for a minimum of 90 days. Therefore, the “retention” setting must be 90 days greater than the “transition to cold after days” setting. The “transition to cold after days” setting cannot be changed after a backup has been transitioned to cold.</p>
    /// <p>Resource types that are able to be transitioned to cold storage are listed in the "Lifecycle to cold storage" section of the <a href="https://docs.aws.amazon.com/aws-backup/latest/devguide/whatisbackup.html#features-by-resource"> Feature availability by resource</a> table. Backup ignores this expression for other resource types.</p>
    /// <p>This parameter has a maximum value of 100 years (36,500 days).</p>
    pub fn set_lifecycle(mut self, input: ::std::option::Option<crate::types::Lifecycle>) -> Self {
        self.inner = self.inner.set_lifecycle(input);
        self
    }
    /// <p>The lifecycle defines when a protected resource is transitioned to cold storage and when it expires. Backup will transition and expire backups automatically according to the lifecycle that you define.</p>
    /// <p>Backups transitioned to cold storage must be stored in cold storage for a minimum of 90 days. Therefore, the “retention” setting must be 90 days greater than the “transition to cold after days” setting. The “transition to cold after days” setting cannot be changed after a backup has been transitioned to cold.</p>
    /// <p>Resource types that are able to be transitioned to cold storage are listed in the "Lifecycle to cold storage" section of the <a href="https://docs.aws.amazon.com/aws-backup/latest/devguide/whatisbackup.html#features-by-resource"> Feature availability by resource</a> table. Backup ignores this expression for other resource types.</p>
    /// <p>This parameter has a maximum value of 100 years (36,500 days).</p>
    pub fn get_lifecycle(&self) -> &::std::option::Option<crate::types::Lifecycle> {
        self.inner.get_lifecycle()
    }
    /// Adds a key-value pair to `RecoveryPointTags`.
    ///
    /// To override the contents of this collection use [`set_recovery_point_tags`](Self::set_recovery_point_tags).
    ///
    /// <p>To help organize your resources, you can assign your own metadata to the resources that you create. Each tag is a key-value pair.</p>
    pub fn recovery_point_tags(
        mut self,
        k: impl ::std::convert::Into<::std::string::String>,
        v: impl ::std::convert::Into<::std::string::String>,
    ) -> Self {
        self.inner = self.inner.recovery_point_tags(k.into(), v.into());
        self
    }
    /// <p>To help organize your resources, you can assign your own metadata to the resources that you create. Each tag is a key-value pair.</p>
    pub fn set_recovery_point_tags(
        mut self,
        input: ::std::option::Option<::std::collections::HashMap<::std::string::String, ::std::string::String>>,
    ) -> Self {
        self.inner = self.inner.set_recovery_point_tags(input);
        self
    }
    /// <p>To help organize your resources, you can assign your own metadata to the resources that you create. Each tag is a key-value pair.</p>
    pub fn get_recovery_point_tags(&self) -> &::std::option::Option<::std::collections::HashMap<::std::string::String, ::std::string::String>> {
        self.inner.get_recovery_point_tags()
    }
    /// Adds a key-value pair to `BackupOptions`.
    ///
    /// To override the contents of this collection use [`set_backup_options`](Self::set_backup_options).
    ///
    /// <p>Specifies the backup option for a selected resource. This option is only available for Windows Volume Shadow Copy Service (VSS) backup jobs.</p>
    /// <p>Valid values: Set to <code>"WindowsVSS":"enabled"</code> to enable the <code>WindowsVSS</code> backup option and create a Windows VSS backup. Set to <code>"WindowsVSS""disabled"</code> to create a regular backup. The <code>WindowsVSS</code> option is not enabled by default.</p>
    pub fn backup_options(
        mut self,
        k: impl ::std::convert::Into<::std::string::String>,
        v: impl ::std::convert::Into<::std::string::String>,
    ) -> Self {
        self.inner = self.inner.backup_options(k.into(), v.into());
        self
    }
    /// <p>Specifies the backup option for a selected resource. This option is only available for Windows Volume Shadow Copy Service (VSS) backup jobs.</p>
    /// <p>Valid values: Set to <code>"WindowsVSS":"enabled"</code> to enable the <code>WindowsVSS</code> backup option and create a Windows VSS backup. Set to <code>"WindowsVSS""disabled"</code> to create a regular backup. The <code>WindowsVSS</code> option is not enabled by default.</p>
    pub fn set_backup_options(
        mut self,
        input: ::std::option::Option<::std::collections::HashMap<::std::string::String, ::std::string::String>>,
    ) -> Self {
        self.inner = self.inner.set_backup_options(input);
        self
    }
    /// <p>Specifies the backup option for a selected resource. This option is only available for Windows Volume Shadow Copy Service (VSS) backup jobs.</p>
    /// <p>Valid values: Set to <code>"WindowsVSS":"enabled"</code> to enable the <code>WindowsVSS</code> backup option and create a Windows VSS backup. Set to <code>"WindowsVSS""disabled"</code> to create a regular backup. The <code>WindowsVSS</code> option is not enabled by default.</p>
    pub fn get_backup_options(&self) -> &::std::option::Option<::std::collections::HashMap<::std::string::String, ::std::string::String>> {
        self.inner.get_backup_options()
    }
}