aws_sdk_athena/operation/start_calculation_execution/
builders.rs

1// Code generated by software.amazon.smithy.rust.codegen.smithy-rs. DO NOT EDIT.
2pub use crate::operation::start_calculation_execution::_start_calculation_execution_output::StartCalculationExecutionOutputBuilder;
3
4pub use crate::operation::start_calculation_execution::_start_calculation_execution_input::StartCalculationExecutionInputBuilder;
5
6impl crate::operation::start_calculation_execution::builders::StartCalculationExecutionInputBuilder {
7    /// Sends a request with this input using the given client.
8    pub async fn send_with(
9        self,
10        client: &crate::Client,
11    ) -> ::std::result::Result<
12        crate::operation::start_calculation_execution::StartCalculationExecutionOutput,
13        ::aws_smithy_runtime_api::client::result::SdkError<
14            crate::operation::start_calculation_execution::StartCalculationExecutionError,
15            ::aws_smithy_runtime_api::client::orchestrator::HttpResponse,
16        >,
17    > {
18        let mut fluent_builder = client.start_calculation_execution();
19        fluent_builder.inner = self;
20        fluent_builder.send().await
21    }
22}
23/// Fluent builder constructing a request to `StartCalculationExecution`.
24///
25/// <p>Submits calculations for execution within a session. You can supply the code to run as an inline code block within the request.</p><note>
26/// <p>The request syntax requires the <code>StartCalculationExecutionRequest$CodeBlock</code> parameter or the <code>CalculationConfiguration$CodeBlock</code> parameter, but not both. Because <code>CalculationConfiguration$CodeBlock</code> is deprecated, use the <code>StartCalculationExecutionRequest$CodeBlock</code> parameter instead.</p>
27/// </note>
28#[derive(::std::clone::Clone, ::std::fmt::Debug)]
29pub struct StartCalculationExecutionFluentBuilder {
30    handle: ::std::sync::Arc<crate::client::Handle>,
31    inner: crate::operation::start_calculation_execution::builders::StartCalculationExecutionInputBuilder,
32    config_override: ::std::option::Option<crate::config::Builder>,
33}
34impl
35    crate::client::customize::internal::CustomizableSend<
36        crate::operation::start_calculation_execution::StartCalculationExecutionOutput,
37        crate::operation::start_calculation_execution::StartCalculationExecutionError,
38    > for StartCalculationExecutionFluentBuilder
39{
40    fn send(
41        self,
42        config_override: crate::config::Builder,
43    ) -> crate::client::customize::internal::BoxFuture<
44        crate::client::customize::internal::SendResult<
45            crate::operation::start_calculation_execution::StartCalculationExecutionOutput,
46            crate::operation::start_calculation_execution::StartCalculationExecutionError,
47        >,
48    > {
49        ::std::boxed::Box::pin(async move { self.config_override(config_override).send().await })
50    }
51}
52impl StartCalculationExecutionFluentBuilder {
53    /// Creates a new `StartCalculationExecutionFluentBuilder`.
54    pub(crate) fn new(handle: ::std::sync::Arc<crate::client::Handle>) -> Self {
55        Self {
56            handle,
57            inner: ::std::default::Default::default(),
58            config_override: ::std::option::Option::None,
59        }
60    }
61    /// Access the StartCalculationExecution as a reference.
62    pub fn as_input(&self) -> &crate::operation::start_calculation_execution::builders::StartCalculationExecutionInputBuilder {
63        &self.inner
64    }
65    /// Sends the request and returns the response.
66    ///
67    /// If an error occurs, an `SdkError` will be returned with additional details that
68    /// can be matched against.
69    ///
70    /// By default, any retryable failures will be retried twice. Retry behavior
71    /// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
72    /// set when configuring the client.
73    pub async fn send(
74        self,
75    ) -> ::std::result::Result<
76        crate::operation::start_calculation_execution::StartCalculationExecutionOutput,
77        ::aws_smithy_runtime_api::client::result::SdkError<
78            crate::operation::start_calculation_execution::StartCalculationExecutionError,
79            ::aws_smithy_runtime_api::client::orchestrator::HttpResponse,
80        >,
81    > {
82        let input = self
83            .inner
84            .build()
85            .map_err(::aws_smithy_runtime_api::client::result::SdkError::construction_failure)?;
86        let runtime_plugins = crate::operation::start_calculation_execution::StartCalculationExecution::operation_runtime_plugins(
87            self.handle.runtime_plugins.clone(),
88            &self.handle.conf,
89            self.config_override,
90        );
91        crate::operation::start_calculation_execution::StartCalculationExecution::orchestrate(&runtime_plugins, input).await
92    }
93
94    /// Consumes this builder, creating a customizable operation that can be modified before being sent.
95    pub fn customize(
96        self,
97    ) -> crate::client::customize::CustomizableOperation<
98        crate::operation::start_calculation_execution::StartCalculationExecutionOutput,
99        crate::operation::start_calculation_execution::StartCalculationExecutionError,
100        Self,
101    > {
102        crate::client::customize::CustomizableOperation::new(self)
103    }
104    pub(crate) fn config_override(mut self, config_override: impl ::std::convert::Into<crate::config::Builder>) -> Self {
105        self.set_config_override(::std::option::Option::Some(config_override.into()));
106        self
107    }
108
109    pub(crate) fn set_config_override(&mut self, config_override: ::std::option::Option<crate::config::Builder>) -> &mut Self {
110        self.config_override = config_override;
111        self
112    }
113    /// <p>The session ID.</p>
114    pub fn session_id(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
115        self.inner = self.inner.session_id(input.into());
116        self
117    }
118    /// <p>The session ID.</p>
119    pub fn set_session_id(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
120        self.inner = self.inner.set_session_id(input);
121        self
122    }
123    /// <p>The session ID.</p>
124    pub fn get_session_id(&self) -> &::std::option::Option<::std::string::String> {
125        self.inner.get_session_id()
126    }
127    /// <p>A description of the calculation.</p>
128    pub fn description(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
129        self.inner = self.inner.description(input.into());
130        self
131    }
132    /// <p>A description of the calculation.</p>
133    pub fn set_description(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
134        self.inner = self.inner.set_description(input);
135        self
136    }
137    /// <p>A description of the calculation.</p>
138    pub fn get_description(&self) -> &::std::option::Option<::std::string::String> {
139        self.inner.get_description()
140    }
141    /// <p>Contains configuration information for the calculation.</p>
142    #[deprecated(note = "Structure is deprecated.")]
143    pub fn calculation_configuration(mut self, input: crate::types::CalculationConfiguration) -> Self {
144        self.inner = self.inner.calculation_configuration(input);
145        self
146    }
147    /// <p>Contains configuration information for the calculation.</p>
148    #[deprecated(note = "Structure is deprecated.")]
149    pub fn set_calculation_configuration(mut self, input: ::std::option::Option<crate::types::CalculationConfiguration>) -> Self {
150        self.inner = self.inner.set_calculation_configuration(input);
151        self
152    }
153    /// <p>Contains configuration information for the calculation.</p>
154    #[deprecated(note = "Structure is deprecated.")]
155    pub fn get_calculation_configuration(&self) -> &::std::option::Option<crate::types::CalculationConfiguration> {
156        self.inner.get_calculation_configuration()
157    }
158    /// <p>A string that contains the code of the calculation. Use this parameter instead of <code>CalculationConfiguration$CodeBlock</code>, which is deprecated.</p>
159    pub fn code_block(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
160        self.inner = self.inner.code_block(input.into());
161        self
162    }
163    /// <p>A string that contains the code of the calculation. Use this parameter instead of <code>CalculationConfiguration$CodeBlock</code>, which is deprecated.</p>
164    pub fn set_code_block(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
165        self.inner = self.inner.set_code_block(input);
166        self
167    }
168    /// <p>A string that contains the code of the calculation. Use this parameter instead of <code>CalculationConfiguration$CodeBlock</code>, which is deprecated.</p>
169    pub fn get_code_block(&self) -> &::std::option::Option<::std::string::String> {
170        self.inner.get_code_block()
171    }
172    /// <p>A unique case-sensitive string used to ensure the request to create the calculation is idempotent (executes only once). If another <code>StartCalculationExecutionRequest</code> is received, the same response is returned and another calculation is not created. If a parameter has changed, an error is returned.</p><important>
173    /// <p>This token is listed as not required because Amazon Web Services SDKs (for example the Amazon Web Services SDK for Java) auto-generate the token for users. If you are not using the Amazon Web Services SDK or the Amazon Web Services CLI, you must provide this token or the action will fail.</p>
174    /// </important>
175    pub fn client_request_token(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
176        self.inner = self.inner.client_request_token(input.into());
177        self
178    }
179    /// <p>A unique case-sensitive string used to ensure the request to create the calculation is idempotent (executes only once). If another <code>StartCalculationExecutionRequest</code> is received, the same response is returned and another calculation is not created. If a parameter has changed, an error is returned.</p><important>
180    /// <p>This token is listed as not required because Amazon Web Services SDKs (for example the Amazon Web Services SDK for Java) auto-generate the token for users. If you are not using the Amazon Web Services SDK or the Amazon Web Services CLI, you must provide this token or the action will fail.</p>
181    /// </important>
182    pub fn set_client_request_token(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
183        self.inner = self.inner.set_client_request_token(input);
184        self
185    }
186    /// <p>A unique case-sensitive string used to ensure the request to create the calculation is idempotent (executes only once). If another <code>StartCalculationExecutionRequest</code> is received, the same response is returned and another calculation is not created. If a parameter has changed, an error is returned.</p><important>
187    /// <p>This token is listed as not required because Amazon Web Services SDKs (for example the Amazon Web Services SDK for Java) auto-generate the token for users. If you are not using the Amazon Web Services SDK or the Amazon Web Services CLI, you must provide this token or the action will fail.</p>
188    /// </important>
189    pub fn get_client_request_token(&self) -> &::std::option::Option<::std::string::String> {
190        self.inner.get_client_request_token()
191    }
192}
aws_sdk_athena/operation/start_calculation_execution/builders.rs

aws_sdk_athena/operation/start_calculation_execution/
builders.rs
