aws_s3_transfer/model/_object_metadata.rs
1// Code generated by software.amazon.smithy.rust.codegen.smithy-rs. DO NOT EDIT.
2
3/// Object metadata from the discovery GET or HEAD response. Some values are also present on the first chunk. Optional fields remain absent when discovery does not return them. Reported checksums describe the stored object; they do not by themselves indicate that the downloaded bytes were checksum-validated.
4#[non_exhaustive]
5#[derive(::std::clone::Clone, ::std::cmp::PartialEq, ::std::default::Default)]
6pub struct ObjectMetadata {
7 /// <p>Indicates that a range of bytes was specified in the request.</p>
8 pub accept_ranges: ::std::option::Option<::std::string::String>,
9 /// <p>The archive state of the head object.</p><note>
10 /// <p>This functionality is not supported for directory buckets.</p>
11 /// </note>
12 /// <p>Available when discovery uses a HEAD response that returns this value.</p>
13 pub archive_status: ::std::option::Option<crate::model::ArchiveStatus>,
14 /// <p>Indicates whether the object uses an S3 Bucket Key for server-side encryption with Key Management Service (KMS) keys (SSE-KMS).</p>
15 pub bucket_key_enabled: ::std::option::Option<bool>,
16 /// <p>Specifies caching behavior along the request/reply chain.</p>
17 pub cache_control: ::std::option::Option<::std::string::String>,
18 /// <p>The Base64 encoded, 32-bit <code>CRC32</code> checksum of the object. This checksum is only present if the object was uploaded with the object. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html"> Checking object integrity</a> in the <i>Amazon S3 User Guide</i>.</p>
19 pub checksum_crc32: ::std::option::Option<::std::string::String>,
20 /// <p>The Base64 encoded, 32-bit <code>CRC32C</code> checksum of the object. This checksum is only present if the checksum was uploaded with the object. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html"> Checking object integrity</a> in the <i>Amazon S3 User Guide</i>.</p>
21 pub checksum_crc32_c: ::std::option::Option<::std::string::String>,
22 /// <p>The Base64 encoded, 64-bit <code>CRC64NVME</code> checksum of the object. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html">Checking object integrity in the Amazon S3 User Guide</a>.</p>
23 pub checksum_crc64_nvme: ::std::option::Option<::std::string::String>,
24 /// <p>The Base64 encoded, 128-bit <code>MD5</code> digest of the object. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html">Checking object integrity in the Amazon S3 User Guide</a>.</p>
25 pub checksum_md5: ::std::option::Option<::std::string::String>,
26 /// <p>The Base64 encoded, 160-bit <code>SHA1</code> digest of the object. This checksum is only present if the checksum was uploaded with the object. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html"> Checking object integrity</a> in the <i>Amazon S3 User Guide</i>.</p>
27 pub checksum_sha1: ::std::option::Option<::std::string::String>,
28 /// <p>The Base64 encoded, 256-bit <code>SHA256</code> digest of the object. This checksum is only present if the checksum was uploaded with the object. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html"> Checking object integrity</a> in the <i>Amazon S3 User Guide</i>.</p>
29 pub checksum_sha256: ::std::option::Option<::std::string::String>,
30 /// <p>The Base64 encoded, 512-bit <code>SHA512</code> digest of the object. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html">Checking object integrity in the Amazon S3 User Guide</a>.</p>
31 pub checksum_sha512: ::std::option::Option<::std::string::String>,
32 /// <p>The checksum type, which determines how part-level checksums are combined to create an object-level checksum for multipart objects. You can use this header response to verify that the checksum type that is received is the same checksum type that was specified in the <code>CreateMultipartUpload</code> request. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html">Checking object integrity</a> in the <i>Amazon S3 User Guide</i>.</p>
33 pub checksum_type: ::std::option::Option<crate::model::ChecksumType>,
34 /// <p>The Base64 encoded, 128-bit <code>XXHASH128</code> checksum of the object. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html">Checking object integrity in the Amazon S3 User Guide</a>.</p>
35 pub checksum_xxhash128: ::std::option::Option<::std::string::String>,
36 /// <p>The Base64 encoded, 64-bit <code>XXHASH3</code> checksum of the object. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html">Checking object integrity in the Amazon S3 User Guide</a>.</p>
37 pub checksum_xxhash3: ::std::option::Option<::std::string::String>,
38 /// <p>The Base64 encoded, 64-bit <code>XXHASH64</code> checksum of the object. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html">Checking object integrity in the Amazon S3 User Guide</a>.</p>
39 pub checksum_xxhash64: ::std::option::Option<::std::string::String>,
40 /// <p>Specifies presentational information for the object.</p>
41 pub content_disposition: ::std::option::Option<::std::string::String>,
42 /// <p>Indicates what content encodings have been applied to the object and thus what decoding mechanisms must be applied to obtain the media-type referenced by the Content-Type header field.</p>
43 pub content_encoding: ::std::option::Option<::std::string::String>,
44 /// <p>The language the content is in.</p>
45 pub content_language: ::std::option::Option<::std::string::String>,
46 /// <p>A standard MIME type describing the format of the object data.</p>
47 pub content_type: ::std::option::Option<::std::string::String>,
48 /// <p>Indicates whether the object retrieved was (true) or was not (false) a Delete Marker. If false, this response header does not appear in the response.</p><note>
49 /// <ul>
50 /// <li>
51 /// <p>If the current version of the object is a delete marker, Amazon S3 behaves as if the object was deleted and includes <code>x-amz-delete-marker: true</code> in the response.</p></li>
52 /// <li>
53 /// <p>If the specified version in the request is a delete marker, the response returns a <code>405 Method Not Allowed</code> error and the <code>Last-Modified: timestamp</code> response header.</p></li>
54 /// </ul>
55 /// </note>
56 pub delete_marker: ::std::option::Option<bool>,
57 /// <p>An entity tag (ETag) is an opaque identifier assigned by a web server to a specific version of a resource found at a URL.</p>
58 pub e_tag: ::std::option::Option<::std::string::String>,
59 /// <p>If the object expiration is configured (see <a href="https://docs.aws.amazon.com/AmazonS3/latest/API/API_PutBucketLifecycleConfiguration.html"> <code>PutBucketLifecycleConfiguration</code> </a>), the response includes this header. It includes the <code>expiry-date</code> and <code>rule-id</code> key-value pairs providing object expiration information. The value of the <code>rule-id</code> is URL-encoded.</p><note>
60 /// <p>Object expiration information is not returned in directory buckets and this header returns the value "<code>NotImplemented</code>" in all responses for directory buckets.</p>
61 /// </note>
62 pub expiration: ::std::option::Option<::std::string::String>,
63 /// <p>Date and time when the object was last modified.</p>
64 /// <p><b>General purpose buckets </b> - When you specify a <code>versionId</code> of the object in your request, if the specified version in the request is a delete marker, the response returns a <code>405 Method Not Allowed</code> error and the <code>Last-Modified: timestamp</code> response header.</p>
65 pub last_modified: ::std::option::Option<::aws_smithy_types::DateTime>,
66 /// <p>A map of metadata to store with the object in S3.</p>
67 pub metadata: ::std::option::Option<
68 ::std::collections::HashMap<::std::string::String, ::std::string::String>,
69 >,
70 /// <p>This is set to the number of metadata entries not returned in the headers that are prefixed with <code>x-amz-meta-</code>. This can happen if you create metadata using an API like SOAP that supports more flexible metadata than the REST API. For example, using SOAP, you can create metadata whose values are not legal HTTP headers.</p><note>
71 /// <p>This functionality is not supported for directory buckets.</p>
72 /// </note>
73 pub missing_meta: ::std::option::Option<i32>,
74 /// <p>Indicates whether this object has an active legal hold. This field is only returned if you have permission to view an object's legal hold status.</p><note>
75 /// <p>This functionality is not supported for directory buckets.</p>
76 /// </note>
77 pub object_lock_legal_hold_status:
78 ::std::option::Option<crate::model::ObjectLockLegalHoldStatus>,
79 /// <p>The Object Lock mode that's currently in place for this object.</p><note>
80 /// <p>This functionality is not supported for directory buckets.</p>
81 /// </note>
82 pub object_lock_mode: ::std::option::Option<crate::model::ObjectLockMode>,
83 /// <p>The date and time when this object's Object Lock will expire.</p><note>
84 /// <p>This functionality is not supported for directory buckets.</p>
85 /// </note>
86 pub object_lock_retain_until_date: ::std::option::Option<::aws_smithy_types::DateTime>,
87 /// <p>The count of parts this object has. This value is only returned if you specify <code>partNumber</code> in your request and the object was uploaded as a multipart upload.</p>
88 pub parts_count: ::std::option::Option<i32>,
89 /// <p>Amazon S3 can return this if your request involves a bucket that is either a source or destination in a replication rule.</p><note>
90 /// <p>This functionality is not supported for directory buckets.</p>
91 /// </note>
92 pub replication_status: ::std::option::Option<crate::model::ReplicationStatus>,
93 /// <p>If present, indicates that the requester was successfully charged for the request. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/RequesterPaysBuckets.html">Using Requester Pays buckets for storage transfers and usage</a> in the <i>Amazon Simple Storage Service user guide</i>.</p><note>
94 /// <p>This functionality is not supported for directory buckets.</p>
95 /// </note>
96 pub request_charged: ::std::option::Option<crate::model::RequestCharged>,
97 /// <p>Provides information about object restoration action and expiration time of the restored object copy.</p><note>
98 /// <p>This functionality is not supported for directory buckets. Directory buckets only support <code>EXPRESS_ONEZONE</code> (the S3 Express One Zone storage class) in Availability Zones and <code>ONEZONE_IA</code> (the S3 One Zone-Infrequent Access storage class) in Dedicated Local Zones.</p>
99 /// </note>
100 pub restore: ::std::option::Option<::std::string::String>,
101 /// <p>If server-side encryption with a customer-provided encryption key was requested, the response will include this header to confirm the encryption algorithm that's used.</p><note>
102 /// <p>This functionality is not supported for directory buckets.</p>
103 /// </note>
104 pub sse_customer_algorithm: ::std::option::Option<::std::string::String>,
105 /// <p>If server-side encryption with a customer-provided encryption key was requested, the response will include this header to provide the round-trip message integrity verification of the customer-provided encryption key.</p><note>
106 /// <p>This functionality is not supported for directory buckets.</p>
107 /// </note>
108 pub sse_customer_key_md5: ::std::option::Option<::std::string::String>,
109 /// <p>If present, indicates the ID of the KMS key that was used for object encryption.</p>
110 pub ssekms_key_id: ::std::option::Option<::std::string::String>,
111 /// <p>The server-side encryption algorithm used when you store this object in Amazon S3 or Amazon FSx.</p><note>
112 /// <p>When accessing data stored in Amazon FSx file systems using S3 access points, the only valid server side encryption option is <code>aws:fsx</code>.</p>
113 /// </note>
114 pub server_side_encryption: ::std::option::Option<crate::model::ServerSideEncryption>,
115 /// <p>Provides storage class information of the object. Amazon S3 returns this header for all objects except for S3 Standard storage class objects.</p><note>
116 /// <p><b>Directory buckets </b> - Directory buckets only support <code>EXPRESS_ONEZONE</code> (the S3 Express One Zone storage class) in Availability Zones and <code>ONEZONE_IA</code> (the S3 One Zone-Infrequent Access storage class) in Dedicated Local Zones.</p>
117 /// </note>
118 pub storage_class: ::std::option::Option<crate::model::StorageClass>,
119 /// <p>The number of tags, if any, on the object, when you have the relevant permission to read object tags.</p>
120 /// <p>You can use <a href="https://docs.aws.amazon.com/AmazonS3/latest/API/API_GetObjectTagging.html">GetObjectTagging</a> to retrieve the tag set associated with an object.</p><note>
121 /// <p>This functionality is not supported for directory buckets.</p>
122 /// </note>
123 pub tag_count: ::std::option::Option<i32>,
124 /// <p>Version ID of the object.</p><note>
125 /// <p>This functionality is not supported for directory buckets.</p>
126 /// </note>
127 pub version_id: ::std::option::Option<::std::string::String>,
128 /// <p>If the bucket is configured as a website, redirects requests for this object to another object in the same bucket or to an external URL. Amazon S3 stores the value of this header in the object metadata.</p><note>
129 /// <p>This functionality is not supported for directory buckets.</p>
130 /// </note>
131 pub website_redirect_location: ::std::option::Option<::std::string::String>,
132 /// <p>The date and time at which the object is no longer cacheable.</p>
133 pub expires_string: ::std::option::Option<::std::string::String>,
134 /// <p>Size of the body in bytes.</p>
135 pub(crate) content_length: ::std::option::Option<i64>,
136 /// <p>The portion of the object returned in the response.</p>
137 pub(crate) content_range: ::std::option::Option<::std::string::String>,
138 /// S3 request ID.
139 _request_id: ::std::option::Option<::std::string::String>,
140 /// S3 extended request ID.
141 _extended_request_id: ::std::option::Option<::std::string::String>,
142}
143impl ObjectMetadata {
144 /// <p>Indicates that a range of bytes was specified in the request.</p>
145 pub fn accept_ranges(&self) -> ::std::option::Option<&str> {
146 self.accept_ranges.as_deref()
147 }
148 /// <p>The archive state of the head object.</p><note>
149 /// <p>This functionality is not supported for directory buckets.</p>
150 /// </note>
151 /// <p>Available when discovery uses a HEAD response that returns this value.</p>
152 pub fn archive_status(&self) -> ::std::option::Option<&crate::model::ArchiveStatus> {
153 self.archive_status.as_ref()
154 }
155 /// <p>Indicates whether the object uses an S3 Bucket Key for server-side encryption with Key Management Service (KMS) keys (SSE-KMS).</p>
156 pub fn bucket_key_enabled(&self) -> ::std::option::Option<bool> {
157 self.bucket_key_enabled
158 }
159 /// <p>Specifies caching behavior along the request/reply chain.</p>
160 pub fn cache_control(&self) -> ::std::option::Option<&str> {
161 self.cache_control.as_deref()
162 }
163 /// <p>The Base64 encoded, 32-bit <code>CRC32</code> checksum of the object. This checksum is only present if the object was uploaded with the object. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html"> Checking object integrity</a> in the <i>Amazon S3 User Guide</i>.</p>
164 pub fn checksum_crc32(&self) -> ::std::option::Option<&str> {
165 self.checksum_crc32.as_deref()
166 }
167 /// <p>The Base64 encoded, 32-bit <code>CRC32C</code> checksum of the object. This checksum is only present if the checksum was uploaded with the object. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html"> Checking object integrity</a> in the <i>Amazon S3 User Guide</i>.</p>
168 pub fn checksum_crc32_c(&self) -> ::std::option::Option<&str> {
169 self.checksum_crc32_c.as_deref()
170 }
171 /// <p>The Base64 encoded, 64-bit <code>CRC64NVME</code> checksum of the object. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html">Checking object integrity in the Amazon S3 User Guide</a>.</p>
172 pub fn checksum_crc64_nvme(&self) -> ::std::option::Option<&str> {
173 self.checksum_crc64_nvme.as_deref()
174 }
175 /// <p>The Base64 encoded, 128-bit <code>MD5</code> digest of the object. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html">Checking object integrity in the Amazon S3 User Guide</a>.</p>
176 pub fn checksum_md5(&self) -> ::std::option::Option<&str> {
177 self.checksum_md5.as_deref()
178 }
179 /// <p>The Base64 encoded, 160-bit <code>SHA1</code> digest of the object. This checksum is only present if the checksum was uploaded with the object. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html"> Checking object integrity</a> in the <i>Amazon S3 User Guide</i>.</p>
180 pub fn checksum_sha1(&self) -> ::std::option::Option<&str> {
181 self.checksum_sha1.as_deref()
182 }
183 /// <p>The Base64 encoded, 256-bit <code>SHA256</code> digest of the object. This checksum is only present if the checksum was uploaded with the object. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html"> Checking object integrity</a> in the <i>Amazon S3 User Guide</i>.</p>
184 pub fn checksum_sha256(&self) -> ::std::option::Option<&str> {
185 self.checksum_sha256.as_deref()
186 }
187 /// <p>The Base64 encoded, 512-bit <code>SHA512</code> digest of the object. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html">Checking object integrity in the Amazon S3 User Guide</a>.</p>
188 pub fn checksum_sha512(&self) -> ::std::option::Option<&str> {
189 self.checksum_sha512.as_deref()
190 }
191 /// <p>The checksum type, which determines how part-level checksums are combined to create an object-level checksum for multipart objects. You can use this header response to verify that the checksum type that is received is the same checksum type that was specified in the <code>CreateMultipartUpload</code> request. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html">Checking object integrity</a> in the <i>Amazon S3 User Guide</i>.</p>
192 pub fn checksum_type(&self) -> ::std::option::Option<&crate::model::ChecksumType> {
193 self.checksum_type.as_ref()
194 }
195 /// <p>The Base64 encoded, 128-bit <code>XXHASH128</code> checksum of the object. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html">Checking object integrity in the Amazon S3 User Guide</a>.</p>
196 pub fn checksum_xxhash128(&self) -> ::std::option::Option<&str> {
197 self.checksum_xxhash128.as_deref()
198 }
199 /// <p>The Base64 encoded, 64-bit <code>XXHASH3</code> checksum of the object. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html">Checking object integrity in the Amazon S3 User Guide</a>.</p>
200 pub fn checksum_xxhash3(&self) -> ::std::option::Option<&str> {
201 self.checksum_xxhash3.as_deref()
202 }
203 /// <p>The Base64 encoded, 64-bit <code>XXHASH64</code> checksum of the object. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html">Checking object integrity in the Amazon S3 User Guide</a>.</p>
204 pub fn checksum_xxhash64(&self) -> ::std::option::Option<&str> {
205 self.checksum_xxhash64.as_deref()
206 }
207 /// <p>Specifies presentational information for the object.</p>
208 pub fn content_disposition(&self) -> ::std::option::Option<&str> {
209 self.content_disposition.as_deref()
210 }
211 /// <p>Indicates what content encodings have been applied to the object and thus what decoding mechanisms must be applied to obtain the media-type referenced by the Content-Type header field.</p>
212 pub fn content_encoding(&self) -> ::std::option::Option<&str> {
213 self.content_encoding.as_deref()
214 }
215 /// <p>The language the content is in.</p>
216 pub fn content_language(&self) -> ::std::option::Option<&str> {
217 self.content_language.as_deref()
218 }
219 /// <p>A standard MIME type describing the format of the object data.</p>
220 pub fn content_type(&self) -> ::std::option::Option<&str> {
221 self.content_type.as_deref()
222 }
223 /// <p>Indicates whether the object retrieved was (true) or was not (false) a Delete Marker. If false, this response header does not appear in the response.</p><note>
224 /// <ul>
225 /// <li>
226 /// <p>If the current version of the object is a delete marker, Amazon S3 behaves as if the object was deleted and includes <code>x-amz-delete-marker: true</code> in the response.</p></li>
227 /// <li>
228 /// <p>If the specified version in the request is a delete marker, the response returns a <code>405 Method Not Allowed</code> error and the <code>Last-Modified: timestamp</code> response header.</p></li>
229 /// </ul>
230 /// </note>
231 pub fn delete_marker(&self) -> ::std::option::Option<bool> {
232 self.delete_marker
233 }
234 /// <p>An entity tag (ETag) is an opaque identifier assigned by a web server to a specific version of a resource found at a URL.</p>
235 pub fn e_tag(&self) -> ::std::option::Option<&str> {
236 self.e_tag.as_deref()
237 }
238 /// <p>If the object expiration is configured (see <a href="https://docs.aws.amazon.com/AmazonS3/latest/API/API_PutBucketLifecycleConfiguration.html"> <code>PutBucketLifecycleConfiguration</code> </a>), the response includes this header. It includes the <code>expiry-date</code> and <code>rule-id</code> key-value pairs providing object expiration information. The value of the <code>rule-id</code> is URL-encoded.</p><note>
239 /// <p>Object expiration information is not returned in directory buckets and this header returns the value "<code>NotImplemented</code>" in all responses for directory buckets.</p>
240 /// </note>
241 pub fn expiration(&self) -> ::std::option::Option<&str> {
242 self.expiration.as_deref()
243 }
244 /// <p>Date and time when the object was last modified.</p>
245 /// <p><b>General purpose buckets </b> - When you specify a <code>versionId</code> of the object in your request, if the specified version in the request is a delete marker, the response returns a <code>405 Method Not Allowed</code> error and the <code>Last-Modified: timestamp</code> response header.</p>
246 pub fn last_modified(&self) -> ::std::option::Option<&::aws_smithy_types::DateTime> {
247 self.last_modified.as_ref()
248 }
249 /// <p>A map of metadata to store with the object in S3.</p>
250 pub fn metadata(
251 &self,
252 ) -> ::std::option::Option<
253 &::std::collections::HashMap<::std::string::String, ::std::string::String>,
254 > {
255 self.metadata.as_ref()
256 }
257 /// <p>This is set to the number of metadata entries not returned in the headers that are prefixed with <code>x-amz-meta-</code>. This can happen if you create metadata using an API like SOAP that supports more flexible metadata than the REST API. For example, using SOAP, you can create metadata whose values are not legal HTTP headers.</p><note>
258 /// <p>This functionality is not supported for directory buckets.</p>
259 /// </note>
260 pub fn missing_meta(&self) -> ::std::option::Option<i32> {
261 self.missing_meta
262 }
263 /// <p>Indicates whether this object has an active legal hold. This field is only returned if you have permission to view an object's legal hold status.</p><note>
264 /// <p>This functionality is not supported for directory buckets.</p>
265 /// </note>
266 pub fn object_lock_legal_hold_status(
267 &self,
268 ) -> ::std::option::Option<&crate::model::ObjectLockLegalHoldStatus> {
269 self.object_lock_legal_hold_status.as_ref()
270 }
271 /// <p>The Object Lock mode that's currently in place for this object.</p><note>
272 /// <p>This functionality is not supported for directory buckets.</p>
273 /// </note>
274 pub fn object_lock_mode(&self) -> ::std::option::Option<&crate::model::ObjectLockMode> {
275 self.object_lock_mode.as_ref()
276 }
277 /// <p>The date and time when this object's Object Lock will expire.</p><note>
278 /// <p>This functionality is not supported for directory buckets.</p>
279 /// </note>
280 pub fn object_lock_retain_until_date(
281 &self,
282 ) -> ::std::option::Option<&::aws_smithy_types::DateTime> {
283 self.object_lock_retain_until_date.as_ref()
284 }
285 /// <p>The count of parts this object has. This value is only returned if you specify <code>partNumber</code> in your request and the object was uploaded as a multipart upload.</p>
286 pub fn parts_count(&self) -> ::std::option::Option<i32> {
287 self.parts_count
288 }
289 /// <p>Amazon S3 can return this if your request involves a bucket that is either a source or destination in a replication rule.</p><note>
290 /// <p>This functionality is not supported for directory buckets.</p>
291 /// </note>
292 pub fn replication_status(&self) -> ::std::option::Option<&crate::model::ReplicationStatus> {
293 self.replication_status.as_ref()
294 }
295 /// <p>If present, indicates that the requester was successfully charged for the request. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/RequesterPaysBuckets.html">Using Requester Pays buckets for storage transfers and usage</a> in the <i>Amazon Simple Storage Service user guide</i>.</p><note>
296 /// <p>This functionality is not supported for directory buckets.</p>
297 /// </note>
298 pub fn request_charged(&self) -> ::std::option::Option<&crate::model::RequestCharged> {
299 self.request_charged.as_ref()
300 }
301 /// <p>Provides information about object restoration action and expiration time of the restored object copy.</p><note>
302 /// <p>This functionality is not supported for directory buckets. Directory buckets only support <code>EXPRESS_ONEZONE</code> (the S3 Express One Zone storage class) in Availability Zones and <code>ONEZONE_IA</code> (the S3 One Zone-Infrequent Access storage class) in Dedicated Local Zones.</p>
303 /// </note>
304 pub fn restore(&self) -> ::std::option::Option<&str> {
305 self.restore.as_deref()
306 }
307 /// <p>If server-side encryption with a customer-provided encryption key was requested, the response will include this header to confirm the encryption algorithm that's used.</p><note>
308 /// <p>This functionality is not supported for directory buckets.</p>
309 /// </note>
310 pub fn sse_customer_algorithm(&self) -> ::std::option::Option<&str> {
311 self.sse_customer_algorithm.as_deref()
312 }
313 /// <p>If server-side encryption with a customer-provided encryption key was requested, the response will include this header to provide the round-trip message integrity verification of the customer-provided encryption key.</p><note>
314 /// <p>This functionality is not supported for directory buckets.</p>
315 /// </note>
316 pub fn sse_customer_key_md5(&self) -> ::std::option::Option<&str> {
317 self.sse_customer_key_md5.as_deref()
318 }
319 /// <p>If present, indicates the ID of the KMS key that was used for object encryption.</p>
320 pub fn ssekms_key_id(&self) -> ::std::option::Option<&str> {
321 self.ssekms_key_id.as_deref()
322 }
323 /// <p>The server-side encryption algorithm used when you store this object in Amazon S3 or Amazon FSx.</p><note>
324 /// <p>When accessing data stored in Amazon FSx file systems using S3 access points, the only valid server side encryption option is <code>aws:fsx</code>.</p>
325 /// </note>
326 pub fn server_side_encryption(
327 &self,
328 ) -> ::std::option::Option<&crate::model::ServerSideEncryption> {
329 self.server_side_encryption.as_ref()
330 }
331 /// <p>Provides storage class information of the object. Amazon S3 returns this header for all objects except for S3 Standard storage class objects.</p><note>
332 /// <p><b>Directory buckets </b> - Directory buckets only support <code>EXPRESS_ONEZONE</code> (the S3 Express One Zone storage class) in Availability Zones and <code>ONEZONE_IA</code> (the S3 One Zone-Infrequent Access storage class) in Dedicated Local Zones.</p>
333 /// </note>
334 pub fn storage_class(&self) -> ::std::option::Option<&crate::model::StorageClass> {
335 self.storage_class.as_ref()
336 }
337 /// <p>The number of tags, if any, on the object, when you have the relevant permission to read object tags.</p>
338 /// <p>You can use <a href="https://docs.aws.amazon.com/AmazonS3/latest/API/API_GetObjectTagging.html">GetObjectTagging</a> to retrieve the tag set associated with an object.</p><note>
339 /// <p>This functionality is not supported for directory buckets.</p>
340 /// </note>
341 pub fn tag_count(&self) -> ::std::option::Option<i32> {
342 self.tag_count
343 }
344 /// <p>Version ID of the object.</p><note>
345 /// <p>This functionality is not supported for directory buckets.</p>
346 /// </note>
347 pub fn version_id(&self) -> ::std::option::Option<&str> {
348 self.version_id.as_deref()
349 }
350 /// <p>If the bucket is configured as a website, redirects requests for this object to another object in the same bucket or to an external URL. Amazon S3 stores the value of this header in the object metadata.</p><note>
351 /// <p>This functionality is not supported for directory buckets.</p>
352 /// </note>
353 pub fn website_redirect_location(&self) -> ::std::option::Option<&str> {
354 self.website_redirect_location.as_deref()
355 }
356 /// <p>The date and time at which the object is no longer cacheable.</p>
357 pub fn expires_string(&self) -> ::std::option::Option<&str> {
358 self.expires_string.as_deref()
359 }
360}
361impl ::std::fmt::Debug for ObjectMetadata {
362 fn fmt(&self, f: &mut ::std::fmt::Formatter<'_>) -> ::std::fmt::Result {
363 let mut formatter = f.debug_struct("ObjectMetadata");
364 formatter.field("accept_ranges", &self.accept_ranges);
365 formatter.field("archive_status", &self.archive_status);
366 formatter.field("bucket_key_enabled", &self.bucket_key_enabled);
367 formatter.field("cache_control", &self.cache_control);
368 formatter.field("checksum_crc32", &self.checksum_crc32);
369 formatter.field("checksum_crc32_c", &self.checksum_crc32_c);
370 formatter.field("checksum_crc64_nvme", &self.checksum_crc64_nvme);
371 formatter.field("checksum_md5", &self.checksum_md5);
372 formatter.field("checksum_sha1", &self.checksum_sha1);
373 formatter.field("checksum_sha256", &self.checksum_sha256);
374 formatter.field("checksum_sha512", &self.checksum_sha512);
375 formatter.field("checksum_type", &self.checksum_type);
376 formatter.field("checksum_xxhash128", &self.checksum_xxhash128);
377 formatter.field("checksum_xxhash3", &self.checksum_xxhash3);
378 formatter.field("checksum_xxhash64", &self.checksum_xxhash64);
379 formatter.field("content_disposition", &self.content_disposition);
380 formatter.field("content_encoding", &self.content_encoding);
381 formatter.field("content_language", &self.content_language);
382 formatter.field("content_type", &self.content_type);
383 formatter.field("delete_marker", &self.delete_marker);
384 formatter.field("e_tag", &self.e_tag);
385 formatter.field("expiration", &self.expiration);
386 formatter.field("last_modified", &self.last_modified);
387 formatter.field("metadata", &self.metadata);
388 formatter.field("missing_meta", &self.missing_meta);
389 formatter.field(
390 "object_lock_legal_hold_status",
391 &self.object_lock_legal_hold_status,
392 );
393 formatter.field("object_lock_mode", &self.object_lock_mode);
394 formatter.field(
395 "object_lock_retain_until_date",
396 &self.object_lock_retain_until_date,
397 );
398 formatter.field("parts_count", &self.parts_count);
399 formatter.field("replication_status", &self.replication_status);
400 formatter.field("request_charged", &self.request_charged);
401 formatter.field("restore", &self.restore);
402 formatter.field("sse_customer_algorithm", &self.sse_customer_algorithm);
403 formatter.field("sse_customer_key_md5", &self.sse_customer_key_md5);
404 formatter.field("ssekms_key_id", &"*** Sensitive Data Redacted ***");
405 formatter.field("server_side_encryption", &self.server_side_encryption);
406 formatter.field("storage_class", &self.storage_class);
407 formatter.field("tag_count", &self.tag_count);
408 formatter.field("version_id", &self.version_id);
409 formatter.field("website_redirect_location", &self.website_redirect_location);
410 formatter.field("expires_string", &self.expires_string);
411 formatter.field("content_length", &self.content_length);
412 formatter.field("content_range", &self.content_range);
413 formatter.field("_request_id", &self._request_id);
414 formatter.field("_extended_request_id", &self._extended_request_id);
415 formatter.finish()
416 }
417}
418impl crate::model::ObjectMetadata {
419 /// <p>Size of the body in bytes.</p>
420 #[allow(dead_code)]
421 pub(crate) fn content_length(&self) -> ::std::option::Option<i64> {
422 self.content_length
423 }
424 /// <p>The portion of the object returned in the response.</p>
425 #[allow(dead_code)]
426 pub(crate) fn content_range(&self) -> ::std::option::Option<&str> {
427 self.content_range.as_deref()
428 }
429 /// S3 request ID.
430 pub fn request_id(&self) -> ::std::option::Option<&str> {
431 self._request_id.as_deref()
432 }
433 /// S3 extended request ID.
434 pub fn extended_request_id(&self) -> ::std::option::Option<&str> {
435 self._extended_request_id.as_deref()
436 }
437}
438impl ObjectMetadata {
439 /// Creates a new builder-style object to manufacture [`ObjectMetadata`](crate::model::ObjectMetadata).
440 pub fn builder() -> crate::model::builders::ObjectMetadataBuilder {
441 crate::model::builders::ObjectMetadataBuilder::default()
442 }
443}
444
445/// A builder for [`ObjectMetadata`](crate::model::ObjectMetadata).
446#[derive(::std::clone::Clone, ::std::cmp::PartialEq, ::std::default::Default)]
447#[non_exhaustive]
448pub struct ObjectMetadataBuilder {
449 pub(crate) accept_ranges: ::std::option::Option<::std::string::String>,
450 pub(crate) archive_status: ::std::option::Option<crate::model::ArchiveStatus>,
451 pub(crate) bucket_key_enabled: ::std::option::Option<bool>,
452 pub(crate) cache_control: ::std::option::Option<::std::string::String>,
453 pub(crate) checksum_crc32: ::std::option::Option<::std::string::String>,
454 pub(crate) checksum_crc32_c: ::std::option::Option<::std::string::String>,
455 pub(crate) checksum_crc64_nvme: ::std::option::Option<::std::string::String>,
456 pub(crate) checksum_md5: ::std::option::Option<::std::string::String>,
457 pub(crate) checksum_sha1: ::std::option::Option<::std::string::String>,
458 pub(crate) checksum_sha256: ::std::option::Option<::std::string::String>,
459 pub(crate) checksum_sha512: ::std::option::Option<::std::string::String>,
460 pub(crate) checksum_type: ::std::option::Option<crate::model::ChecksumType>,
461 pub(crate) checksum_xxhash128: ::std::option::Option<::std::string::String>,
462 pub(crate) checksum_xxhash3: ::std::option::Option<::std::string::String>,
463 pub(crate) checksum_xxhash64: ::std::option::Option<::std::string::String>,
464 pub(crate) content_disposition: ::std::option::Option<::std::string::String>,
465 pub(crate) content_encoding: ::std::option::Option<::std::string::String>,
466 pub(crate) content_language: ::std::option::Option<::std::string::String>,
467 pub(crate) content_type: ::std::option::Option<::std::string::String>,
468 pub(crate) delete_marker: ::std::option::Option<bool>,
469 pub(crate) e_tag: ::std::option::Option<::std::string::String>,
470 pub(crate) expiration: ::std::option::Option<::std::string::String>,
471 pub(crate) last_modified: ::std::option::Option<::aws_smithy_types::DateTime>,
472 pub(crate) metadata: ::std::option::Option<
473 ::std::collections::HashMap<::std::string::String, ::std::string::String>,
474 >,
475 pub(crate) missing_meta: ::std::option::Option<i32>,
476 pub(crate) object_lock_legal_hold_status:
477 ::std::option::Option<crate::model::ObjectLockLegalHoldStatus>,
478 pub(crate) object_lock_mode: ::std::option::Option<crate::model::ObjectLockMode>,
479 pub(crate) object_lock_retain_until_date: ::std::option::Option<::aws_smithy_types::DateTime>,
480 pub(crate) parts_count: ::std::option::Option<i32>,
481 pub(crate) replication_status: ::std::option::Option<crate::model::ReplicationStatus>,
482 pub(crate) request_charged: ::std::option::Option<crate::model::RequestCharged>,
483 pub(crate) restore: ::std::option::Option<::std::string::String>,
484 pub(crate) sse_customer_algorithm: ::std::option::Option<::std::string::String>,
485 pub(crate) sse_customer_key_md5: ::std::option::Option<::std::string::String>,
486 pub(crate) ssekms_key_id: ::std::option::Option<::std::string::String>,
487 pub(crate) server_side_encryption: ::std::option::Option<crate::model::ServerSideEncryption>,
488 pub(crate) storage_class: ::std::option::Option<crate::model::StorageClass>,
489 pub(crate) tag_count: ::std::option::Option<i32>,
490 pub(crate) version_id: ::std::option::Option<::std::string::String>,
491 pub(crate) website_redirect_location: ::std::option::Option<::std::string::String>,
492 pub(crate) expires_string: ::std::option::Option<::std::string::String>,
493 pub(crate) content_length: ::std::option::Option<i64>,
494 pub(crate) content_range: ::std::option::Option<::std::string::String>,
495 pub(crate) _request_id: ::std::option::Option<::std::string::String>,
496 pub(crate) _extended_request_id: ::std::option::Option<::std::string::String>,
497}
498impl ObjectMetadataBuilder {
499 /// <p>Indicates that a range of bytes was specified in the request.</p>
500 pub fn accept_ranges(
501 mut self,
502 input: impl ::std::convert::Into<::std::string::String>,
503 ) -> Self {
504 self.accept_ranges = ::std::option::Option::Some(input.into());
505 self
506 }
507 /// <p>Indicates that a range of bytes was specified in the request.</p>
508 pub fn set_accept_ranges(
509 mut self,
510 input: ::std::option::Option<::std::string::String>,
511 ) -> Self {
512 self.accept_ranges = input;
513 self
514 }
515 /// <p>Indicates that a range of bytes was specified in the request.</p>
516 pub fn get_accept_ranges(&self) -> &::std::option::Option<::std::string::String> {
517 &self.accept_ranges
518 }
519 /// <p>The archive state of the head object.</p><note>
520 /// <p>This functionality is not supported for directory buckets.</p>
521 /// </note>
522 /// <p>Available when discovery uses a HEAD response that returns this value.</p>
523 pub fn archive_status(mut self, input: crate::model::ArchiveStatus) -> Self {
524 self.archive_status = ::std::option::Option::Some(input);
525 self
526 }
527 /// <p>The archive state of the head object.</p><note>
528 /// <p>This functionality is not supported for directory buckets.</p>
529 /// </note>
530 /// <p>Available when discovery uses a HEAD response that returns this value.</p>
531 pub fn set_archive_status(
532 mut self,
533 input: ::std::option::Option<crate::model::ArchiveStatus>,
534 ) -> Self {
535 self.archive_status = input;
536 self
537 }
538 /// <p>The archive state of the head object.</p><note>
539 /// <p>This functionality is not supported for directory buckets.</p>
540 /// </note>
541 /// <p>Available when discovery uses a HEAD response that returns this value.</p>
542 pub fn get_archive_status(&self) -> &::std::option::Option<crate::model::ArchiveStatus> {
543 &self.archive_status
544 }
545 /// <p>Indicates whether the object uses an S3 Bucket Key for server-side encryption with Key Management Service (KMS) keys (SSE-KMS).</p>
546 pub fn bucket_key_enabled(mut self, input: bool) -> Self {
547 self.bucket_key_enabled = ::std::option::Option::Some(input);
548 self
549 }
550 /// <p>Indicates whether the object uses an S3 Bucket Key for server-side encryption with Key Management Service (KMS) keys (SSE-KMS).</p>
551 pub fn set_bucket_key_enabled(mut self, input: ::std::option::Option<bool>) -> Self {
552 self.bucket_key_enabled = input;
553 self
554 }
555 /// <p>Indicates whether the object uses an S3 Bucket Key for server-side encryption with Key Management Service (KMS) keys (SSE-KMS).</p>
556 pub fn get_bucket_key_enabled(&self) -> &::std::option::Option<bool> {
557 &self.bucket_key_enabled
558 }
559 /// <p>Specifies caching behavior along the request/reply chain.</p>
560 pub fn cache_control(
561 mut self,
562 input: impl ::std::convert::Into<::std::string::String>,
563 ) -> Self {
564 self.cache_control = ::std::option::Option::Some(input.into());
565 self
566 }
567 /// <p>Specifies caching behavior along the request/reply chain.</p>
568 pub fn set_cache_control(
569 mut self,
570 input: ::std::option::Option<::std::string::String>,
571 ) -> Self {
572 self.cache_control = input;
573 self
574 }
575 /// <p>Specifies caching behavior along the request/reply chain.</p>
576 pub fn get_cache_control(&self) -> &::std::option::Option<::std::string::String> {
577 &self.cache_control
578 }
579 /// <p>The Base64 encoded, 32-bit <code>CRC32</code> checksum of the object. This checksum is only present if the object was uploaded with the object. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html"> Checking object integrity</a> in the <i>Amazon S3 User Guide</i>.</p>
580 pub fn checksum_crc32(
581 mut self,
582 input: impl ::std::convert::Into<::std::string::String>,
583 ) -> Self {
584 self.checksum_crc32 = ::std::option::Option::Some(input.into());
585 self
586 }
587 /// <p>The Base64 encoded, 32-bit <code>CRC32</code> checksum of the object. This checksum is only present if the object was uploaded with the object. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html"> Checking object integrity</a> in the <i>Amazon S3 User Guide</i>.</p>
588 pub fn set_checksum_crc32(
589 mut self,
590 input: ::std::option::Option<::std::string::String>,
591 ) -> Self {
592 self.checksum_crc32 = input;
593 self
594 }
595 /// <p>The Base64 encoded, 32-bit <code>CRC32</code> checksum of the object. This checksum is only present if the object was uploaded with the object. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html"> Checking object integrity</a> in the <i>Amazon S3 User Guide</i>.</p>
596 pub fn get_checksum_crc32(&self) -> &::std::option::Option<::std::string::String> {
597 &self.checksum_crc32
598 }
599 /// <p>The Base64 encoded, 32-bit <code>CRC32C</code> checksum of the object. This checksum is only present if the checksum was uploaded with the object. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html"> Checking object integrity</a> in the <i>Amazon S3 User Guide</i>.</p>
600 pub fn checksum_crc32_c(
601 mut self,
602 input: impl ::std::convert::Into<::std::string::String>,
603 ) -> Self {
604 self.checksum_crc32_c = ::std::option::Option::Some(input.into());
605 self
606 }
607 /// <p>The Base64 encoded, 32-bit <code>CRC32C</code> checksum of the object. This checksum is only present if the checksum was uploaded with the object. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html"> Checking object integrity</a> in the <i>Amazon S3 User Guide</i>.</p>
608 pub fn set_checksum_crc32_c(
609 mut self,
610 input: ::std::option::Option<::std::string::String>,
611 ) -> Self {
612 self.checksum_crc32_c = input;
613 self
614 }
615 /// <p>The Base64 encoded, 32-bit <code>CRC32C</code> checksum of the object. This checksum is only present if the checksum was uploaded with the object. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html"> Checking object integrity</a> in the <i>Amazon S3 User Guide</i>.</p>
616 pub fn get_checksum_crc32_c(&self) -> &::std::option::Option<::std::string::String> {
617 &self.checksum_crc32_c
618 }
619 /// <p>The Base64 encoded, 64-bit <code>CRC64NVME</code> checksum of the object. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html">Checking object integrity in the Amazon S3 User Guide</a>.</p>
620 pub fn checksum_crc64_nvme(
621 mut self,
622 input: impl ::std::convert::Into<::std::string::String>,
623 ) -> Self {
624 self.checksum_crc64_nvme = ::std::option::Option::Some(input.into());
625 self
626 }
627 /// <p>The Base64 encoded, 64-bit <code>CRC64NVME</code> checksum of the object. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html">Checking object integrity in the Amazon S3 User Guide</a>.</p>
628 pub fn set_checksum_crc64_nvme(
629 mut self,
630 input: ::std::option::Option<::std::string::String>,
631 ) -> Self {
632 self.checksum_crc64_nvme = input;
633 self
634 }
635 /// <p>The Base64 encoded, 64-bit <code>CRC64NVME</code> checksum of the object. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html">Checking object integrity in the Amazon S3 User Guide</a>.</p>
636 pub fn get_checksum_crc64_nvme(&self) -> &::std::option::Option<::std::string::String> {
637 &self.checksum_crc64_nvme
638 }
639 /// <p>The Base64 encoded, 128-bit <code>MD5</code> digest of the object. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html">Checking object integrity in the Amazon S3 User Guide</a>.</p>
640 pub fn checksum_md5(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
641 self.checksum_md5 = ::std::option::Option::Some(input.into());
642 self
643 }
644 /// <p>The Base64 encoded, 128-bit <code>MD5</code> digest of the object. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html">Checking object integrity in the Amazon S3 User Guide</a>.</p>
645 pub fn set_checksum_md5(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
646 self.checksum_md5 = input;
647 self
648 }
649 /// <p>The Base64 encoded, 128-bit <code>MD5</code> digest of the object. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html">Checking object integrity in the Amazon S3 User Guide</a>.</p>
650 pub fn get_checksum_md5(&self) -> &::std::option::Option<::std::string::String> {
651 &self.checksum_md5
652 }
653 /// <p>The Base64 encoded, 160-bit <code>SHA1</code> digest of the object. This checksum is only present if the checksum was uploaded with the object. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html"> Checking object integrity</a> in the <i>Amazon S3 User Guide</i>.</p>
654 pub fn checksum_sha1(
655 mut self,
656 input: impl ::std::convert::Into<::std::string::String>,
657 ) -> Self {
658 self.checksum_sha1 = ::std::option::Option::Some(input.into());
659 self
660 }
661 /// <p>The Base64 encoded, 160-bit <code>SHA1</code> digest of the object. This checksum is only present if the checksum was uploaded with the object. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html"> Checking object integrity</a> in the <i>Amazon S3 User Guide</i>.</p>
662 pub fn set_checksum_sha1(
663 mut self,
664 input: ::std::option::Option<::std::string::String>,
665 ) -> Self {
666 self.checksum_sha1 = input;
667 self
668 }
669 /// <p>The Base64 encoded, 160-bit <code>SHA1</code> digest of the object. This checksum is only present if the checksum was uploaded with the object. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html"> Checking object integrity</a> in the <i>Amazon S3 User Guide</i>.</p>
670 pub fn get_checksum_sha1(&self) -> &::std::option::Option<::std::string::String> {
671 &self.checksum_sha1
672 }
673 /// <p>The Base64 encoded, 256-bit <code>SHA256</code> digest of the object. This checksum is only present if the checksum was uploaded with the object. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html"> Checking object integrity</a> in the <i>Amazon S3 User Guide</i>.</p>
674 pub fn checksum_sha256(
675 mut self,
676 input: impl ::std::convert::Into<::std::string::String>,
677 ) -> Self {
678 self.checksum_sha256 = ::std::option::Option::Some(input.into());
679 self
680 }
681 /// <p>The Base64 encoded, 256-bit <code>SHA256</code> digest of the object. This checksum is only present if the checksum was uploaded with the object. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html"> Checking object integrity</a> in the <i>Amazon S3 User Guide</i>.</p>
682 pub fn set_checksum_sha256(
683 mut self,
684 input: ::std::option::Option<::std::string::String>,
685 ) -> Self {
686 self.checksum_sha256 = input;
687 self
688 }
689 /// <p>The Base64 encoded, 256-bit <code>SHA256</code> digest of the object. This checksum is only present if the checksum was uploaded with the object. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html"> Checking object integrity</a> in the <i>Amazon S3 User Guide</i>.</p>
690 pub fn get_checksum_sha256(&self) -> &::std::option::Option<::std::string::String> {
691 &self.checksum_sha256
692 }
693 /// <p>The Base64 encoded, 512-bit <code>SHA512</code> digest of the object. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html">Checking object integrity in the Amazon S3 User Guide</a>.</p>
694 pub fn checksum_sha512(
695 mut self,
696 input: impl ::std::convert::Into<::std::string::String>,
697 ) -> Self {
698 self.checksum_sha512 = ::std::option::Option::Some(input.into());
699 self
700 }
701 /// <p>The Base64 encoded, 512-bit <code>SHA512</code> digest of the object. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html">Checking object integrity in the Amazon S3 User Guide</a>.</p>
702 pub fn set_checksum_sha512(
703 mut self,
704 input: ::std::option::Option<::std::string::String>,
705 ) -> Self {
706 self.checksum_sha512 = input;
707 self
708 }
709 /// <p>The Base64 encoded, 512-bit <code>SHA512</code> digest of the object. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html">Checking object integrity in the Amazon S3 User Guide</a>.</p>
710 pub fn get_checksum_sha512(&self) -> &::std::option::Option<::std::string::String> {
711 &self.checksum_sha512
712 }
713 /// <p>The checksum type, which determines how part-level checksums are combined to create an object-level checksum for multipart objects. You can use this header response to verify that the checksum type that is received is the same checksum type that was specified in the <code>CreateMultipartUpload</code> request. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html">Checking object integrity</a> in the <i>Amazon S3 User Guide</i>.</p>
714 pub fn checksum_type(mut self, input: crate::model::ChecksumType) -> Self {
715 self.checksum_type = ::std::option::Option::Some(input);
716 self
717 }
718 /// <p>The checksum type, which determines how part-level checksums are combined to create an object-level checksum for multipart objects. You can use this header response to verify that the checksum type that is received is the same checksum type that was specified in the <code>CreateMultipartUpload</code> request. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html">Checking object integrity</a> in the <i>Amazon S3 User Guide</i>.</p>
719 pub fn set_checksum_type(
720 mut self,
721 input: ::std::option::Option<crate::model::ChecksumType>,
722 ) -> Self {
723 self.checksum_type = input;
724 self
725 }
726 /// <p>The checksum type, which determines how part-level checksums are combined to create an object-level checksum for multipart objects. You can use this header response to verify that the checksum type that is received is the same checksum type that was specified in the <code>CreateMultipartUpload</code> request. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html">Checking object integrity</a> in the <i>Amazon S3 User Guide</i>.</p>
727 pub fn get_checksum_type(&self) -> &::std::option::Option<crate::model::ChecksumType> {
728 &self.checksum_type
729 }
730 /// <p>The Base64 encoded, 128-bit <code>XXHASH128</code> checksum of the object. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html">Checking object integrity in the Amazon S3 User Guide</a>.</p>
731 pub fn checksum_xxhash128(
732 mut self,
733 input: impl ::std::convert::Into<::std::string::String>,
734 ) -> Self {
735 self.checksum_xxhash128 = ::std::option::Option::Some(input.into());
736 self
737 }
738 /// <p>The Base64 encoded, 128-bit <code>XXHASH128</code> checksum of the object. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html">Checking object integrity in the Amazon S3 User Guide</a>.</p>
739 pub fn set_checksum_xxhash128(
740 mut self,
741 input: ::std::option::Option<::std::string::String>,
742 ) -> Self {
743 self.checksum_xxhash128 = input;
744 self
745 }
746 /// <p>The Base64 encoded, 128-bit <code>XXHASH128</code> checksum of the object. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html">Checking object integrity in the Amazon S3 User Guide</a>.</p>
747 pub fn get_checksum_xxhash128(&self) -> &::std::option::Option<::std::string::String> {
748 &self.checksum_xxhash128
749 }
750 /// <p>The Base64 encoded, 64-bit <code>XXHASH3</code> checksum of the object. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html">Checking object integrity in the Amazon S3 User Guide</a>.</p>
751 pub fn checksum_xxhash3(
752 mut self,
753 input: impl ::std::convert::Into<::std::string::String>,
754 ) -> Self {
755 self.checksum_xxhash3 = ::std::option::Option::Some(input.into());
756 self
757 }
758 /// <p>The Base64 encoded, 64-bit <code>XXHASH3</code> checksum of the object. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html">Checking object integrity in the Amazon S3 User Guide</a>.</p>
759 pub fn set_checksum_xxhash3(
760 mut self,
761 input: ::std::option::Option<::std::string::String>,
762 ) -> Self {
763 self.checksum_xxhash3 = input;
764 self
765 }
766 /// <p>The Base64 encoded, 64-bit <code>XXHASH3</code> checksum of the object. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html">Checking object integrity in the Amazon S3 User Guide</a>.</p>
767 pub fn get_checksum_xxhash3(&self) -> &::std::option::Option<::std::string::String> {
768 &self.checksum_xxhash3
769 }
770 /// <p>The Base64 encoded, 64-bit <code>XXHASH64</code> checksum of the object. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html">Checking object integrity in the Amazon S3 User Guide</a>.</p>
771 pub fn checksum_xxhash64(
772 mut self,
773 input: impl ::std::convert::Into<::std::string::String>,
774 ) -> Self {
775 self.checksum_xxhash64 = ::std::option::Option::Some(input.into());
776 self
777 }
778 /// <p>The Base64 encoded, 64-bit <code>XXHASH64</code> checksum of the object. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html">Checking object integrity in the Amazon S3 User Guide</a>.</p>
779 pub fn set_checksum_xxhash64(
780 mut self,
781 input: ::std::option::Option<::std::string::String>,
782 ) -> Self {
783 self.checksum_xxhash64 = input;
784 self
785 }
786 /// <p>The Base64 encoded, 64-bit <code>XXHASH64</code> checksum of the object. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html">Checking object integrity in the Amazon S3 User Guide</a>.</p>
787 pub fn get_checksum_xxhash64(&self) -> &::std::option::Option<::std::string::String> {
788 &self.checksum_xxhash64
789 }
790 /// <p>Specifies presentational information for the object.</p>
791 pub fn content_disposition(
792 mut self,
793 input: impl ::std::convert::Into<::std::string::String>,
794 ) -> Self {
795 self.content_disposition = ::std::option::Option::Some(input.into());
796 self
797 }
798 /// <p>Specifies presentational information for the object.</p>
799 pub fn set_content_disposition(
800 mut self,
801 input: ::std::option::Option<::std::string::String>,
802 ) -> Self {
803 self.content_disposition = input;
804 self
805 }
806 /// <p>Specifies presentational information for the object.</p>
807 pub fn get_content_disposition(&self) -> &::std::option::Option<::std::string::String> {
808 &self.content_disposition
809 }
810 /// <p>Indicates what content encodings have been applied to the object and thus what decoding mechanisms must be applied to obtain the media-type referenced by the Content-Type header field.</p>
811 pub fn content_encoding(
812 mut self,
813 input: impl ::std::convert::Into<::std::string::String>,
814 ) -> Self {
815 self.content_encoding = ::std::option::Option::Some(input.into());
816 self
817 }
818 /// <p>Indicates what content encodings have been applied to the object and thus what decoding mechanisms must be applied to obtain the media-type referenced by the Content-Type header field.</p>
819 pub fn set_content_encoding(
820 mut self,
821 input: ::std::option::Option<::std::string::String>,
822 ) -> Self {
823 self.content_encoding = input;
824 self
825 }
826 /// <p>Indicates what content encodings have been applied to the object and thus what decoding mechanisms must be applied to obtain the media-type referenced by the Content-Type header field.</p>
827 pub fn get_content_encoding(&self) -> &::std::option::Option<::std::string::String> {
828 &self.content_encoding
829 }
830 /// <p>The language the content is in.</p>
831 pub fn content_language(
832 mut self,
833 input: impl ::std::convert::Into<::std::string::String>,
834 ) -> Self {
835 self.content_language = ::std::option::Option::Some(input.into());
836 self
837 }
838 /// <p>The language the content is in.</p>
839 pub fn set_content_language(
840 mut self,
841 input: ::std::option::Option<::std::string::String>,
842 ) -> Self {
843 self.content_language = input;
844 self
845 }
846 /// <p>The language the content is in.</p>
847 pub fn get_content_language(&self) -> &::std::option::Option<::std::string::String> {
848 &self.content_language
849 }
850 /// <p>A standard MIME type describing the format of the object data.</p>
851 pub fn content_type(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
852 self.content_type = ::std::option::Option::Some(input.into());
853 self
854 }
855 /// <p>A standard MIME type describing the format of the object data.</p>
856 pub fn set_content_type(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
857 self.content_type = input;
858 self
859 }
860 /// <p>A standard MIME type describing the format of the object data.</p>
861 pub fn get_content_type(&self) -> &::std::option::Option<::std::string::String> {
862 &self.content_type
863 }
864 /// <p>Indicates whether the object retrieved was (true) or was not (false) a Delete Marker. If false, this response header does not appear in the response.</p><note>
865 /// <ul>
866 /// <li>
867 /// <p>If the current version of the object is a delete marker, Amazon S3 behaves as if the object was deleted and includes <code>x-amz-delete-marker: true</code> in the response.</p></li>
868 /// <li>
869 /// <p>If the specified version in the request is a delete marker, the response returns a <code>405 Method Not Allowed</code> error and the <code>Last-Modified: timestamp</code> response header.</p></li>
870 /// </ul>
871 /// </note>
872 pub fn delete_marker(mut self, input: bool) -> Self {
873 self.delete_marker = ::std::option::Option::Some(input);
874 self
875 }
876 /// <p>Indicates whether the object retrieved was (true) or was not (false) a Delete Marker. If false, this response header does not appear in the response.</p><note>
877 /// <ul>
878 /// <li>
879 /// <p>If the current version of the object is a delete marker, Amazon S3 behaves as if the object was deleted and includes <code>x-amz-delete-marker: true</code> in the response.</p></li>
880 /// <li>
881 /// <p>If the specified version in the request is a delete marker, the response returns a <code>405 Method Not Allowed</code> error and the <code>Last-Modified: timestamp</code> response header.</p></li>
882 /// </ul>
883 /// </note>
884 pub fn set_delete_marker(mut self, input: ::std::option::Option<bool>) -> Self {
885 self.delete_marker = input;
886 self
887 }
888 /// <p>Indicates whether the object retrieved was (true) or was not (false) a Delete Marker. If false, this response header does not appear in the response.</p><note>
889 /// <ul>
890 /// <li>
891 /// <p>If the current version of the object is a delete marker, Amazon S3 behaves as if the object was deleted and includes <code>x-amz-delete-marker: true</code> in the response.</p></li>
892 /// <li>
893 /// <p>If the specified version in the request is a delete marker, the response returns a <code>405 Method Not Allowed</code> error and the <code>Last-Modified: timestamp</code> response header.</p></li>
894 /// </ul>
895 /// </note>
896 pub fn get_delete_marker(&self) -> &::std::option::Option<bool> {
897 &self.delete_marker
898 }
899 /// <p>An entity tag (ETag) is an opaque identifier assigned by a web server to a specific version of a resource found at a URL.</p>
900 pub fn e_tag(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
901 self.e_tag = ::std::option::Option::Some(input.into());
902 self
903 }
904 /// <p>An entity tag (ETag) is an opaque identifier assigned by a web server to a specific version of a resource found at a URL.</p>
905 pub fn set_e_tag(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
906 self.e_tag = input;
907 self
908 }
909 /// <p>An entity tag (ETag) is an opaque identifier assigned by a web server to a specific version of a resource found at a URL.</p>
910 pub fn get_e_tag(&self) -> &::std::option::Option<::std::string::String> {
911 &self.e_tag
912 }
913 /// <p>If the object expiration is configured (see <a href="https://docs.aws.amazon.com/AmazonS3/latest/API/API_PutBucketLifecycleConfiguration.html"> <code>PutBucketLifecycleConfiguration</code> </a>), the response includes this header. It includes the <code>expiry-date</code> and <code>rule-id</code> key-value pairs providing object expiration information. The value of the <code>rule-id</code> is URL-encoded.</p><note>
914 /// <p>Object expiration information is not returned in directory buckets and this header returns the value "<code>NotImplemented</code>" in all responses for directory buckets.</p>
915 /// </note>
916 pub fn expiration(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
917 self.expiration = ::std::option::Option::Some(input.into());
918 self
919 }
920 /// <p>If the object expiration is configured (see <a href="https://docs.aws.amazon.com/AmazonS3/latest/API/API_PutBucketLifecycleConfiguration.html"> <code>PutBucketLifecycleConfiguration</code> </a>), the response includes this header. It includes the <code>expiry-date</code> and <code>rule-id</code> key-value pairs providing object expiration information. The value of the <code>rule-id</code> is URL-encoded.</p><note>
921 /// <p>Object expiration information is not returned in directory buckets and this header returns the value "<code>NotImplemented</code>" in all responses for directory buckets.</p>
922 /// </note>
923 pub fn set_expiration(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
924 self.expiration = input;
925 self
926 }
927 /// <p>If the object expiration is configured (see <a href="https://docs.aws.amazon.com/AmazonS3/latest/API/API_PutBucketLifecycleConfiguration.html"> <code>PutBucketLifecycleConfiguration</code> </a>), the response includes this header. It includes the <code>expiry-date</code> and <code>rule-id</code> key-value pairs providing object expiration information. The value of the <code>rule-id</code> is URL-encoded.</p><note>
928 /// <p>Object expiration information is not returned in directory buckets and this header returns the value "<code>NotImplemented</code>" in all responses for directory buckets.</p>
929 /// </note>
930 pub fn get_expiration(&self) -> &::std::option::Option<::std::string::String> {
931 &self.expiration
932 }
933 /// <p>Date and time when the object was last modified.</p>
934 /// <p><b>General purpose buckets </b> - When you specify a <code>versionId</code> of the object in your request, if the specified version in the request is a delete marker, the response returns a <code>405 Method Not Allowed</code> error and the <code>Last-Modified: timestamp</code> response header.</p>
935 pub fn last_modified(mut self, input: ::aws_smithy_types::DateTime) -> Self {
936 self.last_modified = ::std::option::Option::Some(input);
937 self
938 }
939 /// <p>Date and time when the object was last modified.</p>
940 /// <p><b>General purpose buckets </b> - When you specify a <code>versionId</code> of the object in your request, if the specified version in the request is a delete marker, the response returns a <code>405 Method Not Allowed</code> error and the <code>Last-Modified: timestamp</code> response header.</p>
941 pub fn set_last_modified(
942 mut self,
943 input: ::std::option::Option<::aws_smithy_types::DateTime>,
944 ) -> Self {
945 self.last_modified = input;
946 self
947 }
948 /// <p>Date and time when the object was last modified.</p>
949 /// <p><b>General purpose buckets </b> - When you specify a <code>versionId</code> of the object in your request, if the specified version in the request is a delete marker, the response returns a <code>405 Method Not Allowed</code> error and the <code>Last-Modified: timestamp</code> response header.</p>
950 pub fn get_last_modified(&self) -> &::std::option::Option<::aws_smithy_types::DateTime> {
951 &self.last_modified
952 }
953 /// Adds a key-value pair to `metadata`.
954 ///
955 /// To override the contents of this collection use [`set_metadata`](Self::set_metadata).
956 ///
957 /// <p>A map of metadata to store with the object in S3.</p>
958 pub fn metadata(
959 mut self,
960 k: impl ::std::convert::Into<::std::string::String>,
961 v: impl ::std::convert::Into<::std::string::String>,
962 ) -> Self {
963 let mut hash_map = self.metadata.unwrap_or_default();
964 hash_map.insert(k.into(), v.into());
965 self.metadata = ::std::option::Option::Some(hash_map);
966 self
967 }
968 /// <p>A map of metadata to store with the object in S3.</p>
969 pub fn set_metadata(
970 mut self,
971 input: ::std::option::Option<
972 ::std::collections::HashMap<::std::string::String, ::std::string::String>,
973 >,
974 ) -> Self {
975 self.metadata = input;
976 self
977 }
978 /// <p>A map of metadata to store with the object in S3.</p>
979 pub fn get_metadata(
980 &self,
981 ) -> &::std::option::Option<
982 ::std::collections::HashMap<::std::string::String, ::std::string::String>,
983 > {
984 &self.metadata
985 }
986 /// <p>This is set to the number of metadata entries not returned in the headers that are prefixed with <code>x-amz-meta-</code>. This can happen if you create metadata using an API like SOAP that supports more flexible metadata than the REST API. For example, using SOAP, you can create metadata whose values are not legal HTTP headers.</p><note>
987 /// <p>This functionality is not supported for directory buckets.</p>
988 /// </note>
989 pub fn missing_meta(mut self, input: i32) -> Self {
990 self.missing_meta = ::std::option::Option::Some(input);
991 self
992 }
993 /// <p>This is set to the number of metadata entries not returned in the headers that are prefixed with <code>x-amz-meta-</code>. This can happen if you create metadata using an API like SOAP that supports more flexible metadata than the REST API. For example, using SOAP, you can create metadata whose values are not legal HTTP headers.</p><note>
994 /// <p>This functionality is not supported for directory buckets.</p>
995 /// </note>
996 pub fn set_missing_meta(mut self, input: ::std::option::Option<i32>) -> Self {
997 self.missing_meta = input;
998 self
999 }
1000 /// <p>This is set to the number of metadata entries not returned in the headers that are prefixed with <code>x-amz-meta-</code>. This can happen if you create metadata using an API like SOAP that supports more flexible metadata than the REST API. For example, using SOAP, you can create metadata whose values are not legal HTTP headers.</p><note>
1001 /// <p>This functionality is not supported for directory buckets.</p>
1002 /// </note>
1003 pub fn get_missing_meta(&self) -> &::std::option::Option<i32> {
1004 &self.missing_meta
1005 }
1006 /// <p>Indicates whether this object has an active legal hold. This field is only returned if you have permission to view an object's legal hold status.</p><note>
1007 /// <p>This functionality is not supported for directory buckets.</p>
1008 /// </note>
1009 pub fn object_lock_legal_hold_status(
1010 mut self,
1011 input: crate::model::ObjectLockLegalHoldStatus,
1012 ) -> Self {
1013 self.object_lock_legal_hold_status = ::std::option::Option::Some(input);
1014 self
1015 }
1016 /// <p>Indicates whether this object has an active legal hold. This field is only returned if you have permission to view an object's legal hold status.</p><note>
1017 /// <p>This functionality is not supported for directory buckets.</p>
1018 /// </note>
1019 pub fn set_object_lock_legal_hold_status(
1020 mut self,
1021 input: ::std::option::Option<crate::model::ObjectLockLegalHoldStatus>,
1022 ) -> Self {
1023 self.object_lock_legal_hold_status = input;
1024 self
1025 }
1026 /// <p>Indicates whether this object has an active legal hold. This field is only returned if you have permission to view an object's legal hold status.</p><note>
1027 /// <p>This functionality is not supported for directory buckets.</p>
1028 /// </note>
1029 pub fn get_object_lock_legal_hold_status(
1030 &self,
1031 ) -> &::std::option::Option<crate::model::ObjectLockLegalHoldStatus> {
1032 &self.object_lock_legal_hold_status
1033 }
1034 /// <p>The Object Lock mode that's currently in place for this object.</p><note>
1035 /// <p>This functionality is not supported for directory buckets.</p>
1036 /// </note>
1037 pub fn object_lock_mode(mut self, input: crate::model::ObjectLockMode) -> Self {
1038 self.object_lock_mode = ::std::option::Option::Some(input);
1039 self
1040 }
1041 /// <p>The Object Lock mode that's currently in place for this object.</p><note>
1042 /// <p>This functionality is not supported for directory buckets.</p>
1043 /// </note>
1044 pub fn set_object_lock_mode(
1045 mut self,
1046 input: ::std::option::Option<crate::model::ObjectLockMode>,
1047 ) -> Self {
1048 self.object_lock_mode = input;
1049 self
1050 }
1051 /// <p>The Object Lock mode that's currently in place for this object.</p><note>
1052 /// <p>This functionality is not supported for directory buckets.</p>
1053 /// </note>
1054 pub fn get_object_lock_mode(&self) -> &::std::option::Option<crate::model::ObjectLockMode> {
1055 &self.object_lock_mode
1056 }
1057 /// <p>The date and time when this object's Object Lock will expire.</p><note>
1058 /// <p>This functionality is not supported for directory buckets.</p>
1059 /// </note>
1060 pub fn object_lock_retain_until_date(mut self, input: ::aws_smithy_types::DateTime) -> Self {
1061 self.object_lock_retain_until_date = ::std::option::Option::Some(input);
1062 self
1063 }
1064 /// <p>The date and time when this object's Object Lock will expire.</p><note>
1065 /// <p>This functionality is not supported for directory buckets.</p>
1066 /// </note>
1067 pub fn set_object_lock_retain_until_date(
1068 mut self,
1069 input: ::std::option::Option<::aws_smithy_types::DateTime>,
1070 ) -> Self {
1071 self.object_lock_retain_until_date = input;
1072 self
1073 }
1074 /// <p>The date and time when this object's Object Lock will expire.</p><note>
1075 /// <p>This functionality is not supported for directory buckets.</p>
1076 /// </note>
1077 pub fn get_object_lock_retain_until_date(
1078 &self,
1079 ) -> &::std::option::Option<::aws_smithy_types::DateTime> {
1080 &self.object_lock_retain_until_date
1081 }
1082 /// <p>The count of parts this object has. This value is only returned if you specify <code>partNumber</code> in your request and the object was uploaded as a multipart upload.</p>
1083 pub fn parts_count(mut self, input: i32) -> Self {
1084 self.parts_count = ::std::option::Option::Some(input);
1085 self
1086 }
1087 /// <p>The count of parts this object has. This value is only returned if you specify <code>partNumber</code> in your request and the object was uploaded as a multipart upload.</p>
1088 pub fn set_parts_count(mut self, input: ::std::option::Option<i32>) -> Self {
1089 self.parts_count = input;
1090 self
1091 }
1092 /// <p>The count of parts this object has. This value is only returned if you specify <code>partNumber</code> in your request and the object was uploaded as a multipart upload.</p>
1093 pub fn get_parts_count(&self) -> &::std::option::Option<i32> {
1094 &self.parts_count
1095 }
1096 /// <p>Amazon S3 can return this if your request involves a bucket that is either a source or destination in a replication rule.</p><note>
1097 /// <p>This functionality is not supported for directory buckets.</p>
1098 /// </note>
1099 pub fn replication_status(mut self, input: crate::model::ReplicationStatus) -> Self {
1100 self.replication_status = ::std::option::Option::Some(input);
1101 self
1102 }
1103 /// <p>Amazon S3 can return this if your request involves a bucket that is either a source or destination in a replication rule.</p><note>
1104 /// <p>This functionality is not supported for directory buckets.</p>
1105 /// </note>
1106 pub fn set_replication_status(
1107 mut self,
1108 input: ::std::option::Option<crate::model::ReplicationStatus>,
1109 ) -> Self {
1110 self.replication_status = input;
1111 self
1112 }
1113 /// <p>Amazon S3 can return this if your request involves a bucket that is either a source or destination in a replication rule.</p><note>
1114 /// <p>This functionality is not supported for directory buckets.</p>
1115 /// </note>
1116 pub fn get_replication_status(
1117 &self,
1118 ) -> &::std::option::Option<crate::model::ReplicationStatus> {
1119 &self.replication_status
1120 }
1121 /// <p>If present, indicates that the requester was successfully charged for the request. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/RequesterPaysBuckets.html">Using Requester Pays buckets for storage transfers and usage</a> in the <i>Amazon Simple Storage Service user guide</i>.</p><note>
1122 /// <p>This functionality is not supported for directory buckets.</p>
1123 /// </note>
1124 pub fn request_charged(mut self, input: crate::model::RequestCharged) -> Self {
1125 self.request_charged = ::std::option::Option::Some(input);
1126 self
1127 }
1128 /// <p>If present, indicates that the requester was successfully charged for the request. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/RequesterPaysBuckets.html">Using Requester Pays buckets for storage transfers and usage</a> in the <i>Amazon Simple Storage Service user guide</i>.</p><note>
1129 /// <p>This functionality is not supported for directory buckets.</p>
1130 /// </note>
1131 pub fn set_request_charged(
1132 mut self,
1133 input: ::std::option::Option<crate::model::RequestCharged>,
1134 ) -> Self {
1135 self.request_charged = input;
1136 self
1137 }
1138 /// <p>If present, indicates that the requester was successfully charged for the request. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/RequesterPaysBuckets.html">Using Requester Pays buckets for storage transfers and usage</a> in the <i>Amazon Simple Storage Service user guide</i>.</p><note>
1139 /// <p>This functionality is not supported for directory buckets.</p>
1140 /// </note>
1141 pub fn get_request_charged(&self) -> &::std::option::Option<crate::model::RequestCharged> {
1142 &self.request_charged
1143 }
1144 /// <p>Provides information about object restoration action and expiration time of the restored object copy.</p><note>
1145 /// <p>This functionality is not supported for directory buckets. Directory buckets only support <code>EXPRESS_ONEZONE</code> (the S3 Express One Zone storage class) in Availability Zones and <code>ONEZONE_IA</code> (the S3 One Zone-Infrequent Access storage class) in Dedicated Local Zones.</p>
1146 /// </note>
1147 pub fn restore(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
1148 self.restore = ::std::option::Option::Some(input.into());
1149 self
1150 }
1151 /// <p>Provides information about object restoration action and expiration time of the restored object copy.</p><note>
1152 /// <p>This functionality is not supported for directory buckets. Directory buckets only support <code>EXPRESS_ONEZONE</code> (the S3 Express One Zone storage class) in Availability Zones and <code>ONEZONE_IA</code> (the S3 One Zone-Infrequent Access storage class) in Dedicated Local Zones.</p>
1153 /// </note>
1154 pub fn set_restore(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
1155 self.restore = input;
1156 self
1157 }
1158 /// <p>Provides information about object restoration action and expiration time of the restored object copy.</p><note>
1159 /// <p>This functionality is not supported for directory buckets. Directory buckets only support <code>EXPRESS_ONEZONE</code> (the S3 Express One Zone storage class) in Availability Zones and <code>ONEZONE_IA</code> (the S3 One Zone-Infrequent Access storage class) in Dedicated Local Zones.</p>
1160 /// </note>
1161 pub fn get_restore(&self) -> &::std::option::Option<::std::string::String> {
1162 &self.restore
1163 }
1164 /// <p>If server-side encryption with a customer-provided encryption key was requested, the response will include this header to confirm the encryption algorithm that's used.</p><note>
1165 /// <p>This functionality is not supported for directory buckets.</p>
1166 /// </note>
1167 pub fn sse_customer_algorithm(
1168 mut self,
1169 input: impl ::std::convert::Into<::std::string::String>,
1170 ) -> Self {
1171 self.sse_customer_algorithm = ::std::option::Option::Some(input.into());
1172 self
1173 }
1174 /// <p>If server-side encryption with a customer-provided encryption key was requested, the response will include this header to confirm the encryption algorithm that's used.</p><note>
1175 /// <p>This functionality is not supported for directory buckets.</p>
1176 /// </note>
1177 pub fn set_sse_customer_algorithm(
1178 mut self,
1179 input: ::std::option::Option<::std::string::String>,
1180 ) -> Self {
1181 self.sse_customer_algorithm = input;
1182 self
1183 }
1184 /// <p>If server-side encryption with a customer-provided encryption key was requested, the response will include this header to confirm the encryption algorithm that's used.</p><note>
1185 /// <p>This functionality is not supported for directory buckets.</p>
1186 /// </note>
1187 pub fn get_sse_customer_algorithm(&self) -> &::std::option::Option<::std::string::String> {
1188 &self.sse_customer_algorithm
1189 }
1190 /// <p>If server-side encryption with a customer-provided encryption key was requested, the response will include this header to provide the round-trip message integrity verification of the customer-provided encryption key.</p><note>
1191 /// <p>This functionality is not supported for directory buckets.</p>
1192 /// </note>
1193 pub fn sse_customer_key_md5(
1194 mut self,
1195 input: impl ::std::convert::Into<::std::string::String>,
1196 ) -> Self {
1197 self.sse_customer_key_md5 = ::std::option::Option::Some(input.into());
1198 self
1199 }
1200 /// <p>If server-side encryption with a customer-provided encryption key was requested, the response will include this header to provide the round-trip message integrity verification of the customer-provided encryption key.</p><note>
1201 /// <p>This functionality is not supported for directory buckets.</p>
1202 /// </note>
1203 pub fn set_sse_customer_key_md5(
1204 mut self,
1205 input: ::std::option::Option<::std::string::String>,
1206 ) -> Self {
1207 self.sse_customer_key_md5 = input;
1208 self
1209 }
1210 /// <p>If server-side encryption with a customer-provided encryption key was requested, the response will include this header to provide the round-trip message integrity verification of the customer-provided encryption key.</p><note>
1211 /// <p>This functionality is not supported for directory buckets.</p>
1212 /// </note>
1213 pub fn get_sse_customer_key_md5(&self) -> &::std::option::Option<::std::string::String> {
1214 &self.sse_customer_key_md5
1215 }
1216 /// <p>If present, indicates the ID of the KMS key that was used for object encryption.</p>
1217 pub fn ssekms_key_id(
1218 mut self,
1219 input: impl ::std::convert::Into<::std::string::String>,
1220 ) -> Self {
1221 self.ssekms_key_id = ::std::option::Option::Some(input.into());
1222 self
1223 }
1224 /// <p>If present, indicates the ID of the KMS key that was used for object encryption.</p>
1225 pub fn set_ssekms_key_id(
1226 mut self,
1227 input: ::std::option::Option<::std::string::String>,
1228 ) -> Self {
1229 self.ssekms_key_id = input;
1230 self
1231 }
1232 /// <p>If present, indicates the ID of the KMS key that was used for object encryption.</p>
1233 pub fn get_ssekms_key_id(&self) -> &::std::option::Option<::std::string::String> {
1234 &self.ssekms_key_id
1235 }
1236 /// <p>The server-side encryption algorithm used when you store this object in Amazon S3 or Amazon FSx.</p><note>
1237 /// <p>When accessing data stored in Amazon FSx file systems using S3 access points, the only valid server side encryption option is <code>aws:fsx</code>.</p>
1238 /// </note>
1239 pub fn server_side_encryption(mut self, input: crate::model::ServerSideEncryption) -> Self {
1240 self.server_side_encryption = ::std::option::Option::Some(input);
1241 self
1242 }
1243 /// <p>The server-side encryption algorithm used when you store this object in Amazon S3 or Amazon FSx.</p><note>
1244 /// <p>When accessing data stored in Amazon FSx file systems using S3 access points, the only valid server side encryption option is <code>aws:fsx</code>.</p>
1245 /// </note>
1246 pub fn set_server_side_encryption(
1247 mut self,
1248 input: ::std::option::Option<crate::model::ServerSideEncryption>,
1249 ) -> Self {
1250 self.server_side_encryption = input;
1251 self
1252 }
1253 /// <p>The server-side encryption algorithm used when you store this object in Amazon S3 or Amazon FSx.</p><note>
1254 /// <p>When accessing data stored in Amazon FSx file systems using S3 access points, the only valid server side encryption option is <code>aws:fsx</code>.</p>
1255 /// </note>
1256 pub fn get_server_side_encryption(
1257 &self,
1258 ) -> &::std::option::Option<crate::model::ServerSideEncryption> {
1259 &self.server_side_encryption
1260 }
1261 /// <p>Provides storage class information of the object. Amazon S3 returns this header for all objects except for S3 Standard storage class objects.</p><note>
1262 /// <p><b>Directory buckets </b> - Directory buckets only support <code>EXPRESS_ONEZONE</code> (the S3 Express One Zone storage class) in Availability Zones and <code>ONEZONE_IA</code> (the S3 One Zone-Infrequent Access storage class) in Dedicated Local Zones.</p>
1263 /// </note>
1264 pub fn storage_class(mut self, input: crate::model::StorageClass) -> Self {
1265 self.storage_class = ::std::option::Option::Some(input);
1266 self
1267 }
1268 /// <p>Provides storage class information of the object. Amazon S3 returns this header for all objects except for S3 Standard storage class objects.</p><note>
1269 /// <p><b>Directory buckets </b> - Directory buckets only support <code>EXPRESS_ONEZONE</code> (the S3 Express One Zone storage class) in Availability Zones and <code>ONEZONE_IA</code> (the S3 One Zone-Infrequent Access storage class) in Dedicated Local Zones.</p>
1270 /// </note>
1271 pub fn set_storage_class(
1272 mut self,
1273 input: ::std::option::Option<crate::model::StorageClass>,
1274 ) -> Self {
1275 self.storage_class = input;
1276 self
1277 }
1278 /// <p>Provides storage class information of the object. Amazon S3 returns this header for all objects except for S3 Standard storage class objects.</p><note>
1279 /// <p><b>Directory buckets </b> - Directory buckets only support <code>EXPRESS_ONEZONE</code> (the S3 Express One Zone storage class) in Availability Zones and <code>ONEZONE_IA</code> (the S3 One Zone-Infrequent Access storage class) in Dedicated Local Zones.</p>
1280 /// </note>
1281 pub fn get_storage_class(&self) -> &::std::option::Option<crate::model::StorageClass> {
1282 &self.storage_class
1283 }
1284 /// <p>The number of tags, if any, on the object, when you have the relevant permission to read object tags.</p>
1285 /// <p>You can use <a href="https://docs.aws.amazon.com/AmazonS3/latest/API/API_GetObjectTagging.html">GetObjectTagging</a> to retrieve the tag set associated with an object.</p><note>
1286 /// <p>This functionality is not supported for directory buckets.</p>
1287 /// </note>
1288 pub fn tag_count(mut self, input: i32) -> Self {
1289 self.tag_count = ::std::option::Option::Some(input);
1290 self
1291 }
1292 /// <p>The number of tags, if any, on the object, when you have the relevant permission to read object tags.</p>
1293 /// <p>You can use <a href="https://docs.aws.amazon.com/AmazonS3/latest/API/API_GetObjectTagging.html">GetObjectTagging</a> to retrieve the tag set associated with an object.</p><note>
1294 /// <p>This functionality is not supported for directory buckets.</p>
1295 /// </note>
1296 pub fn set_tag_count(mut self, input: ::std::option::Option<i32>) -> Self {
1297 self.tag_count = input;
1298 self
1299 }
1300 /// <p>The number of tags, if any, on the object, when you have the relevant permission to read object tags.</p>
1301 /// <p>You can use <a href="https://docs.aws.amazon.com/AmazonS3/latest/API/API_GetObjectTagging.html">GetObjectTagging</a> to retrieve the tag set associated with an object.</p><note>
1302 /// <p>This functionality is not supported for directory buckets.</p>
1303 /// </note>
1304 pub fn get_tag_count(&self) -> &::std::option::Option<i32> {
1305 &self.tag_count
1306 }
1307 /// <p>Version ID of the object.</p><note>
1308 /// <p>This functionality is not supported for directory buckets.</p>
1309 /// </note>
1310 pub fn version_id(mut self, input: impl ::std::convert::Into<::std::string::String>) -> Self {
1311 self.version_id = ::std::option::Option::Some(input.into());
1312 self
1313 }
1314 /// <p>Version ID of the object.</p><note>
1315 /// <p>This functionality is not supported for directory buckets.</p>
1316 /// </note>
1317 pub fn set_version_id(mut self, input: ::std::option::Option<::std::string::String>) -> Self {
1318 self.version_id = input;
1319 self
1320 }
1321 /// <p>Version ID of the object.</p><note>
1322 /// <p>This functionality is not supported for directory buckets.</p>
1323 /// </note>
1324 pub fn get_version_id(&self) -> &::std::option::Option<::std::string::String> {
1325 &self.version_id
1326 }
1327 /// <p>If the bucket is configured as a website, redirects requests for this object to another object in the same bucket or to an external URL. Amazon S3 stores the value of this header in the object metadata.</p><note>
1328 /// <p>This functionality is not supported for directory buckets.</p>
1329 /// </note>
1330 pub fn website_redirect_location(
1331 mut self,
1332 input: impl ::std::convert::Into<::std::string::String>,
1333 ) -> Self {
1334 self.website_redirect_location = ::std::option::Option::Some(input.into());
1335 self
1336 }
1337 /// <p>If the bucket is configured as a website, redirects requests for this object to another object in the same bucket or to an external URL. Amazon S3 stores the value of this header in the object metadata.</p><note>
1338 /// <p>This functionality is not supported for directory buckets.</p>
1339 /// </note>
1340 pub fn set_website_redirect_location(
1341 mut self,
1342 input: ::std::option::Option<::std::string::String>,
1343 ) -> Self {
1344 self.website_redirect_location = input;
1345 self
1346 }
1347 /// <p>If the bucket is configured as a website, redirects requests for this object to another object in the same bucket or to an external URL. Amazon S3 stores the value of this header in the object metadata.</p><note>
1348 /// <p>This functionality is not supported for directory buckets.</p>
1349 /// </note>
1350 pub fn get_website_redirect_location(&self) -> &::std::option::Option<::std::string::String> {
1351 &self.website_redirect_location
1352 }
1353 /// <p>The date and time at which the object is no longer cacheable.</p>
1354 pub fn expires_string(
1355 mut self,
1356 input: impl ::std::convert::Into<::std::string::String>,
1357 ) -> Self {
1358 self.expires_string = ::std::option::Option::Some(input.into());
1359 self
1360 }
1361 /// <p>The date and time at which the object is no longer cacheable.</p>
1362 pub fn set_expires_string(
1363 mut self,
1364 input: ::std::option::Option<::std::string::String>,
1365 ) -> Self {
1366 self.expires_string = input;
1367 self
1368 }
1369 /// <p>The date and time at which the object is no longer cacheable.</p>
1370 pub fn get_expires_string(&self) -> &::std::option::Option<::std::string::String> {
1371 &self.expires_string
1372 }
1373 /// <p>Size of the body in bytes.</p>
1374 #[allow(dead_code)]
1375 pub(crate) fn content_length(mut self, input: i64) -> Self {
1376 self.content_length = ::std::option::Option::Some(input);
1377 self
1378 }
1379 /// <p>Size of the body in bytes.</p>
1380 #[allow(dead_code)]
1381 pub(crate) fn set_content_length(mut self, input: ::std::option::Option<i64>) -> Self {
1382 self.content_length = input;
1383 self
1384 }
1385 /// <p>Size of the body in bytes.</p>
1386 #[allow(dead_code)]
1387 pub(crate) fn get_content_length(&self) -> &::std::option::Option<i64> {
1388 &self.content_length
1389 }
1390 /// <p>The portion of the object returned in the response.</p>
1391 #[allow(dead_code)]
1392 pub(crate) fn content_range(
1393 mut self,
1394 input: impl ::std::convert::Into<::std::string::String>,
1395 ) -> Self {
1396 self.content_range = ::std::option::Option::Some(input.into());
1397 self
1398 }
1399 /// <p>The portion of the object returned in the response.</p>
1400 #[allow(dead_code)]
1401 pub(crate) fn set_content_range(
1402 mut self,
1403 input: ::std::option::Option<::std::string::String>,
1404 ) -> Self {
1405 self.content_range = input;
1406 self
1407 }
1408 /// <p>The portion of the object returned in the response.</p>
1409 #[allow(dead_code)]
1410 pub(crate) fn get_content_range(&self) -> &::std::option::Option<::std::string::String> {
1411 &self.content_range
1412 }
1413 /// S3 request ID.
1414 #[allow(dead_code)]
1415 pub(crate) fn request_id(
1416 mut self,
1417 input: impl ::std::convert::Into<::std::string::String>,
1418 ) -> Self {
1419 self._request_id = ::std::option::Option::Some(input.into());
1420 self
1421 }
1422 /// S3 request ID.
1423 #[allow(dead_code)]
1424 pub(crate) fn set_request_id(
1425 mut self,
1426 input: ::std::option::Option<::std::string::String>,
1427 ) -> Self {
1428 self._request_id = input;
1429 self
1430 }
1431 /// S3 request ID.
1432 #[allow(dead_code)]
1433 pub(crate) fn get_request_id(&self) -> &::std::option::Option<::std::string::String> {
1434 &self._request_id
1435 }
1436 /// S3 extended request ID.
1437 #[allow(dead_code)]
1438 pub(crate) fn extended_request_id(
1439 mut self,
1440 input: impl ::std::convert::Into<::std::string::String>,
1441 ) -> Self {
1442 self._extended_request_id = ::std::option::Option::Some(input.into());
1443 self
1444 }
1445 /// S3 extended request ID.
1446 #[allow(dead_code)]
1447 pub(crate) fn set_extended_request_id(
1448 mut self,
1449 input: ::std::option::Option<::std::string::String>,
1450 ) -> Self {
1451 self._extended_request_id = input;
1452 self
1453 }
1454 /// S3 extended request ID.
1455 #[allow(dead_code)]
1456 pub(crate) fn get_extended_request_id(&self) -> &::std::option::Option<::std::string::String> {
1457 &self._extended_request_id
1458 }
1459 /// Consumes the builder and constructs a [`ObjectMetadata`](crate::model::ObjectMetadata).
1460 pub fn build(self) -> crate::model::ObjectMetadata {
1461 crate::model::ObjectMetadata {
1462 accept_ranges: self.accept_ranges,
1463 archive_status: self.archive_status,
1464 bucket_key_enabled: self.bucket_key_enabled,
1465 cache_control: self.cache_control,
1466 checksum_crc32: self.checksum_crc32,
1467 checksum_crc32_c: self.checksum_crc32_c,
1468 checksum_crc64_nvme: self.checksum_crc64_nvme,
1469 checksum_md5: self.checksum_md5,
1470 checksum_sha1: self.checksum_sha1,
1471 checksum_sha256: self.checksum_sha256,
1472 checksum_sha512: self.checksum_sha512,
1473 checksum_type: self.checksum_type,
1474 checksum_xxhash128: self.checksum_xxhash128,
1475 checksum_xxhash3: self.checksum_xxhash3,
1476 checksum_xxhash64: self.checksum_xxhash64,
1477 content_disposition: self.content_disposition,
1478 content_encoding: self.content_encoding,
1479 content_language: self.content_language,
1480 content_type: self.content_type,
1481 delete_marker: self.delete_marker,
1482 e_tag: self.e_tag,
1483 expiration: self.expiration,
1484 last_modified: self.last_modified,
1485 metadata: self.metadata,
1486 missing_meta: self.missing_meta,
1487 object_lock_legal_hold_status: self.object_lock_legal_hold_status,
1488 object_lock_mode: self.object_lock_mode,
1489 object_lock_retain_until_date: self.object_lock_retain_until_date,
1490 parts_count: self.parts_count,
1491 replication_status: self.replication_status,
1492 request_charged: self.request_charged,
1493 restore: self.restore,
1494 sse_customer_algorithm: self.sse_customer_algorithm,
1495 sse_customer_key_md5: self.sse_customer_key_md5,
1496 ssekms_key_id: self.ssekms_key_id,
1497 server_side_encryption: self.server_side_encryption,
1498 storage_class: self.storage_class,
1499 tag_count: self.tag_count,
1500 version_id: self.version_id,
1501 website_redirect_location: self.website_redirect_location,
1502 expires_string: self.expires_string,
1503 content_length: self.content_length,
1504 content_range: self.content_range,
1505 _request_id: self._request_id,
1506 _extended_request_id: self._extended_request_id,
1507 }
1508 }
1509}
1510impl ::std::fmt::Debug for ObjectMetadataBuilder {
1511 fn fmt(&self, f: &mut ::std::fmt::Formatter<'_>) -> ::std::fmt::Result {
1512 let mut formatter = f.debug_struct("ObjectMetadataBuilder");
1513 formatter.field("accept_ranges", &self.accept_ranges);
1514 formatter.field("archive_status", &self.archive_status);
1515 formatter.field("bucket_key_enabled", &self.bucket_key_enabled);
1516 formatter.field("cache_control", &self.cache_control);
1517 formatter.field("checksum_crc32", &self.checksum_crc32);
1518 formatter.field("checksum_crc32_c", &self.checksum_crc32_c);
1519 formatter.field("checksum_crc64_nvme", &self.checksum_crc64_nvme);
1520 formatter.field("checksum_md5", &self.checksum_md5);
1521 formatter.field("checksum_sha1", &self.checksum_sha1);
1522 formatter.field("checksum_sha256", &self.checksum_sha256);
1523 formatter.field("checksum_sha512", &self.checksum_sha512);
1524 formatter.field("checksum_type", &self.checksum_type);
1525 formatter.field("checksum_xxhash128", &self.checksum_xxhash128);
1526 formatter.field("checksum_xxhash3", &self.checksum_xxhash3);
1527 formatter.field("checksum_xxhash64", &self.checksum_xxhash64);
1528 formatter.field("content_disposition", &self.content_disposition);
1529 formatter.field("content_encoding", &self.content_encoding);
1530 formatter.field("content_language", &self.content_language);
1531 formatter.field("content_type", &self.content_type);
1532 formatter.field("delete_marker", &self.delete_marker);
1533 formatter.field("e_tag", &self.e_tag);
1534 formatter.field("expiration", &self.expiration);
1535 formatter.field("last_modified", &self.last_modified);
1536 formatter.field("metadata", &self.metadata);
1537 formatter.field("missing_meta", &self.missing_meta);
1538 formatter.field(
1539 "object_lock_legal_hold_status",
1540 &self.object_lock_legal_hold_status,
1541 );
1542 formatter.field("object_lock_mode", &self.object_lock_mode);
1543 formatter.field(
1544 "object_lock_retain_until_date",
1545 &self.object_lock_retain_until_date,
1546 );
1547 formatter.field("parts_count", &self.parts_count);
1548 formatter.field("replication_status", &self.replication_status);
1549 formatter.field("request_charged", &self.request_charged);
1550 formatter.field("restore", &self.restore);
1551 formatter.field("sse_customer_algorithm", &self.sse_customer_algorithm);
1552 formatter.field("sse_customer_key_md5", &self.sse_customer_key_md5);
1553 formatter.field("ssekms_key_id", &"*** Sensitive Data Redacted ***");
1554 formatter.field("server_side_encryption", &self.server_side_encryption);
1555 formatter.field("storage_class", &self.storage_class);
1556 formatter.field("tag_count", &self.tag_count);
1557 formatter.field("version_id", &self.version_id);
1558 formatter.field("website_redirect_location", &self.website_redirect_location);
1559 formatter.field("expires_string", &self.expires_string);
1560 formatter.field("content_length", &self.content_length);
1561 formatter.field("content_range", &self.content_range);
1562 formatter.field("_request_id", &self._request_id);
1563 formatter.field("_extended_request_id", &self._extended_request_id);
1564 formatter.finish()
1565 }
1566}