Module atxmega16d4

Expand description

The module containing the values for the ‘atxmega16d4’ microcontroller The AVR ATxmega16D4 microcontroller

§Variants

	Pinout	Mcu age	Operating temperature	Operating voltage	Max speed
ATxmega16D4-AU	QFN-QFP-44	TQFP44	-40°C - 85°C	1.6V - 3.6V	32 MHz
ATxmega16D4-MH	QFN-QFP-44	VQFN44	-40°C - 85°C	1.6V - 3.6V	32 MHz
ATxmega16D4-CU	BGA-49	VFBGA49	-40°C - 85°C	1.6V - 3.6V	32 MHz
ATxmega16D4-AN	QFN-QFP-44	TQFP44	-40°C - 105°C	1.6V - 3.6V	32 MHz
ATxmega16D4-M7	BGA-49	VFBGA49	-40°C - 105°C	1.6V - 3.6V	32 MHz

Modules§

ac_hysmode: Hysteresis mode selection
ac_intlvl: Interrupt level
ac_intmode: Interrupt mode
ac_muxneg: Negative input multiplexer selection
ac_muxpos: Positive input multiplexer selection
ac_wintlvl: Window interrupt level
ac_wintmode: Windows interrupt mode
ac_wstate: Window mode state
adc_ch_gain: Gain factor
adc_ch_inputmode: Input mode
adc_ch_intlvl: Interrupt level
adc_ch_intmode: Interupt mode
adc_ch_muxint: Internal input multiplexer selections
adc_ch_muxneg: Negative input multiplexer selection
adc_ch_muxpos: Positive input multiplexer selection
adc_currlimit: Current Limitation Mode
adc_dmasel: DMA request selection
adc_evact: Event action selection
adc_evsel: Event channel input selection
adc_prescaler: Clock prescaler
adc_refsel: Voltage reference selection
adc_resolution: Conversion result resolution
awex_fdact: Fault Detect Action
bod: BOD operation
bodlvl: Brownout Detection Voltage Level
bootrst: Boot Loader Section Reset Vector
ccp: CCP signatures
clk_psadiv: Prescaler A Division Factor
clk_psbcdiv: Prescaler B and C Division Factor
clk_rtcsrc: RTC Clock Source
clk_sclksel: System Clock Selection
crc_reset: Reset
crc_source: Input Source
evsys_chmux: Event Channel multiplexer input selection
evsys_digfilt: Digital filter coefficient
evsys_qdirm: Quadrature Decoder Index Recognition Mode
hires_hren: High Resolution Enable
irda_evsel: Event channel selection
nvm_blba: Boot lock bits - application section
nvm_blbat: Boot lock bits - application table section
nvm_blbb: Boot lock bits - boot setcion
nvm_cmd: NVM Command
nvm_eelvl: EEPROM ready interrupt level
nvm_lb: Lock bits
nvm_spmlvl: SPM ready interrupt level
osc_frqrange: Oscillator Frequency Range
osc_pllsrc: PLL Clock Source
osc_xoscsel: External Oscillator Selection and Startup Time
port_int0lvl: Port Interrupt 0 Level
port_int1lvl: Port Interrupt 1 Level
port_isc: Input/Sense Configuration
port_opc: Output/Pull Configuration
portcfg_clkout: Clock Output Port
portcfg_evout: Event Output Port
portcfg_vp0map: Virtual Port 0 Mapping
portcfg_vp1map: Virtual Port 1 Mapping
portcfg_vp2map: Virtual Port 2 Mapping
portcfg_vp3map: Virtual Port 3 Mapping
rtc_compintlvl: Compare Interrupt level
rtc_ovfintlvl: Overflow Interrupt level
rtc_prescaler: Prescaler Factor
sda_hold_time: SDA hold time
sleep_smode: Sleep Mode
spi_intlvl: Interrupt level
spi_mode: SPI Mode
spi_prescaler: Prescaler setting
sut: Start-up Time
tc2_bytem: Byte Mode
tc2_clksel: Clock Selection
tc2_cmd: Timer/Counter Command
tc2_cmden: Timer/Counter Command
tc2_hunfintlvl: High Byte Underflow Interrupt Level
tc2_lcmpaintlvl: Low Byte Compare A Interrupt Level
tc2_lcmpbintlvl: Low Byte Compare B Interrupt Level
tc2_lcmpcintlvl: Low Byte Compare C Interrupt Level
tc2_lcmpdintlvl: Low Byte Compare D Interrupt Level
tc2_lunfintlvl: Low Byte Underflow Interrupt Level
tc_ccaintlvl: Compare or Capture A Interrupt Level
tc_ccbintlvl: Compare or Capture B Interrupt Level
tc_cccintlvl: Compare or Capture C Interrupt Level
tc_ccdintlvl: Compare or Capture D Interrupt Level
tc_clksel: Clock Selection
tc_cmd: Timer/Counter Command
tc_errintlvl: Error Interrupt Level
tc_evact: Event Action
tc_evsel: Event Selection
tc_ovfintlvl: Overflow Interrupt Level
tc_wgmode: Waveform Generation Mode
toscsel: 32.768kHz Timer Oscillator Pin Selection
twi_master_busstate: Master Bus State
twi_master_cmd: Master Command
twi_master_intlvl: Master Interrupt Level
twi_master_timeout: Inactive Timeout
twi_slave_cmd: Slave Command
twi_slave_intlvl: Slave Interrupt Level
usart_chsize: Character Size
usart_cmode: Communication Mode
usart_dreintlvl: Data Register Empty Interrupt level
usart_pmode: Parity Mode
usart_rxcintlvl: Receive Complete Interrupt level
usart_txcintlvl: Transmit Complete Interrupt level
wd: Watchdog (Window) Timeout Period
wdt_per: Period setting
wdt_wper: Closed window period

Constants§

AC: Bitfield on register PRPA
AC0CTRL: Analog Comparator 0 Control.
AC0MUXCTRL: Analog Comparator 0 MUX Control.
AC1CTRL: Analog Comparator 1 Control.
AC1MUXCTRL: Analog Comparator 1 MUX Control.
ADC: Bitfield on register PRPA
ADCACAL0: ADCA Calibration Byte 0.
ADCACAL1: ADCA Calibration Byte 1.
ADCBCAL0: ADCB Calibration Byte 0.
ADCBCAL1: ADCB Calibration Byte 1.
ADDR: Address Register.
ADDR0: Address Register 0.
ADDR1: Address Register 1.
ADDR2: Address Register 2.
ADDREN: Bitfield on register ADDRMASK
ADDRMASK: Address Mask Register.
AWEXCLOCK: Bitfield on register AWEXLOCK
AWEXELOCK: Bitfield on register AWEXLOCK
AWEXLOCK: AWEX Lock.
BANDGAP: Bitfield on register REFCTRL
BAUD: Baurd Rate Control Register.
BAUDCTRLA: Baud Rate Control Register A.
BAUDCTRLB: Baud Rate Control Register B.
BLBA: Bitfield on register LOCKBITS
BLBAT: Bitfield on register LOCKBITS
BLBB: Bitfield on register LOCKBITS
BODACT: Bitfield on register FUSEBYTE5
BODLVL: Bitfield on register FUSEBYTE5
BODPD: Bitfield on register FUSEBYTE2
BOOTRST: Bitfield on register FUSEBYTE2
BSCALE: Bitfield on register BAUDCTRLB
BYTEM: Bitfield on register CTRLE
C: Bitfield on register SREG
CAL: Calibration Value.
CALA: Calibration Register A.
CALB: Calibration Register B.
CALH: Calibration Value high byte.
CALL: Calibration Value low byte.
CCA: Compare or Capture A.
CCABUF: Compare Or Capture A Buffer.
CCABUFH: Compare Or Capture A Buffer high byte.
CCABUFL: Compare Or Capture A Buffer low byte.
CCAH: Compare or Capture A high byte.
CCAL: Compare or Capture A low byte.
CCB: Compare or Capture B.
CCBBUF: Compare Or Capture B Buffer.
CCBBUFH: Compare Or Capture B Buffer high byte.
CCBBUFL: Compare Or Capture B Buffer low byte.
CCBH: Compare or Capture B high byte.
CCBL: Compare or Capture B low byte.
CCC: Compare or Capture C.
CCCBUF: Compare Or Capture C Buffer.
CCCBUFH: Compare Or Capture C Buffer high byte.
CCCBUFL: Compare Or Capture C Buffer low byte.
CCCH: Compare or Capture C high byte.
CCCL: Compare or Capture C low byte.
CCD: Compare or Capture D.
CCDBUF: Compare Or Capture D Buffer.
CCDBUFH: Compare Or Capture D Buffer high byte.
CCDBUFL: Compare Or Capture D Buffer low byte.
CCDH: Compare or Capture D high byte.
CCDL: Compare or Capture D low byte.
CCP: Configuration Change Protection.
CH0CTRL: Channel 0 Control Register.
CH0MUX: Event Channel 0 Multiplexer.
CH0RES: Channel 0 Result.
CH0RESH: Channel 0 Result high byte.
CH0RESL: Channel 0 Result low byte.
CH1CTRL: Channel 1 Control Register.
CH1MUX: Event Channel 1 Multiplexer.
CH1RES: Channel 1 Result.
CH1RESH: Channel 1 Result high byte.
CH1RESL: Channel 1 Result low byte.
CH2CTRL: Channel 2 Control Register.
CH2MUX: Event Channel 2 Multiplexer.
CH2RES: Channel 2 Result.
CH2RESH: Channel 2 Result high byte.
CH2RESL: Channel 2 Result low byte.
CH3CTRL: Channel 3 Control Register.
CH3MUX: Event Channel 3 Multiplexer.
CH3RES: Channel 3 Result.
CH3RESH: Channel 3 Result high byte.
CH3RESL: Channel 3 Result low byte.
CHECKSUM0: Checksum byte 0.
CHECKSUM1: Checksum byte 1.
CHECKSUM2: Checksum byte 2.
CHECKSUM3: Checksum byte 3.
CHSIZE: Bitfield on register CTRLC
CLK2X: Bitfield on register CTRLB
CLKEVOUT: Clock and Event Out Register.
CLKOUT: Bitfield on register CLKEVOUT
CMD: Command.
CMDEN: Bitfield on register CTRLF
CMODE: Bitfield on register CTRLC
CMP: Compare Value.
CMPH: Compare Value high byte.
CMPL: Compare Value low byte.
CNT: Count.
CNTH: Count high byte.
CNTL: Count low byte.
COMP: Compare Register.
COMP0: Oscillator Compare Register 0.
COMP1: Oscillator Compare Register 1.
COMP2: Oscillator Compare Register 2.
COMPH: Compare Register high byte.
COMPL: Compare Register low byte.
COORDX0: Wafer Coordinate X Byte 0.
COORDX1: Wafer Coordinate X Byte 1.
COORDY0: Wafer Coordinate Y Byte 0.
COORDY1: Wafer Coordinate Y Byte 1.
COUNT: Bitfield on register SCAN
CTRL: Control Register.
CTRLA: Control Register A.
CTRLB: Control Register B.
CTRLC: Control Register C.
CTRLD: Control Register D.
CTRLE: Control Register E.
CTRLF: Control Register F.
CTRLFCLR: Control Register F Clear.
CTRLFSET: Control Register F Set.
CTRLGCLR: Control Register G Clear.
CTRLGSET: Control Register G Set.
DATA: Data Register.
DATA0: Data Register 0.
DATA1: Data Register 1.
DATA2: Data Register 2.
DATAIN: Data Input.
DEVID0: Device ID byte 0.
DEVID1: Device ID byte 1.
DEVID2: Device ID byte 2.
DFLLCTRL: DFLL Control Register.
DIR: I/O Port Data Direction.
DIRCLR: I/O Port Data Direction Clear.
DIRSET: I/O Port Data Direction Set.
DIRTGL: I/O Port Data Direction Toggle.
DREINTLVL: Bitfield on register CTRLA
DTBOTH: Dead Time Both Sides.
DTBOTHBUF: Dead Time Both Sides Buffer.
DTHS: Dead Time High Side.
DTHSBUF: Dead Time High Side Buffer.
DTLS: Dead Time Low Side.
DTLSBUF: Dead Time Low Side Buffer.
DVSDON: Bitfield on register FUSEBYTE2
EESAVE: Bitfield on register FUSEBYTE5
EIND: Extended Indirect Jump.
EVCTRL: Event Control.
EVDLY: Bitfield on register CTRLD
EVOUT: Bitfield on register CLKEVOUT
EVSYS: Bitfield on register PRGEN
EVSYS0LOCK: Bitfield on register EVSYSLOCK
EVSYS1LOCK: Bitfield on register EVSYSLOCK
EVSYSLOCK: Event System Lock.
FDACT: Bitfield on register FDCTRL
FDCTRL: Fault Detection Control Register.
FDDBD: Bitfield on register FDCTRL
FDEMASK: Fault Detection Event Mask.
FDMODE: Bitfield on register FDCTRL
FRQRANGE: Bitfield on register XOSCCTRL
FUSEBYTE1: Watchdog Configuration.
FUSEBYTE2: Reset Configuration.
FUSEBYTE4: Start-up Configuration.
FUSEBYTE5: EESAVE and BOD Level.
GPIOR0: General Purpose IO Register 0.
GPIOR1: General Purpose IO Register 1.
GPIOR2: General Purpose IO Register 2.
GPIOR3: General Purpose IO Register 3.
H: Bitfield on register SREG
HCMPA: High Byte Compare A.
HCMPB: High Byte Compare B.
HCMPC: High Byte Compare C.
HCMPD: High Byte Compare D.
HCNT: High Byte Count.
HIRES: Bitfield on register PRPC
HPER: High Byte Period.
HUNFIF: Bitfield on register INTFLAGS
HUNFINTLVL: Bitfield on register INTCTRLA
I: Bitfield on register SREG
IF: Bitfield on register STATUS
IN: I/O port Input.
INT0MASK: Port Interrupt 0 Mask.
INT1MASK: Port Interrupt 1 Mask.
INTCTRL: Interrupt Control Register.
INTCTRLA: Interrupt Control Register A.
INTCTRLB: Interrupt Control Register B.
INTFLAGS: Interrupt Flag Register.
INTPRI: Interrupt Priority.
JTAGD: Bitfield on register MCUCR
JTAGUID: JTAG User ID.
LB: Bitfield on register LOCKBITS
LCMPA: Low Byte Compare A.
LCMPAIF: Bitfield on register INTFLAGS
LCMPAINTLVL: Bitfield on register INTCTRLB
LCMPB: Low Byte Compare B.
LCMPBIF: Bitfield on register INTFLAGS
LCMPBINTLVL: Bitfield on register INTCTRLB
LCMPC: Low Byte Compare C.
LCMPCIF: Bitfield on register INTFLAGS
LCMPCINTLVL: Bitfield on register INTCTRLB
LCMPD: Low Byte Compare D.
LCMPDIF: Bitfield on register INTFLAGS
LCMPDINTLVL: Bitfield on register INTCTRLB
LCNT: Low Byte Count.
LOCK: Lock register.
LOCKBITS: Lock Bits.
LOTNUM0: Lot Number Byte 0, ASCII.
LOTNUM1: Lot Number Byte 1, ASCII.
LOTNUM2: Lot Number Byte 2, ASCII.
LOTNUM3: Lot Number Byte 3, ASCII.
LOTNUM4: Lot Number Byte 4, ASCII.
LOTNUM5: Lot Number Byte 5, ASCII.
LPER: Low Byte Period.
LUNFIF: Bitfield on register INTFLAGS
LUNFINTLVL: Bitfield on register INTCTRLA
MCUCR: MCU Control.
MPCM: Bitfield on register CTRLB
MPCMASK: Multi-pin Configuration Mask.
MUXCTRL: MUX Control.
MUXINT: Bitfield on register MUXCTRL
N: Bitfield on register SREG
OCDR0: OCD Register 0.
OCDR1: OCD Register 1.
OFFSET: Bitfield on register SCAN
OUT: I/O Port Output.
OUTCLR: I/O Port Output Clear.
OUTOVEN: Output Override Enable.
OUTSET: I/O Port Output Set.
OUTTGL: I/O Port Output Toggle.
PER: Period.
PERBUF: Period Buffer.
PERBUFH: Period Buffer high byte.
PERBUFL: Period Buffer low byte.
PERH: Period high byte.
PERL: Period low byte.
PIN0CTRL: Pin 0 Control Register.
PIN1CTRL: Pin 1 Control Register.
PIN2CTRL: Pin 2 Control Register.
PIN3CTRL: Pin 3 Control Register.
PIN4CTRL: Pin 4 Control Register.
PIN5CTRL: Pin 5 Control Register.
PIN6CTRL: Pin 6 Control Register.
PIN7CTRL: Pin 7 Control Register.
PLLCTRL: PLL Control REgister.
PLLFAC: Bitfield on register PLLCTRL
PLLSRC: Bitfield on register PLLCTRL
PMODE: Bitfield on register CTRLC
PRESCALER: Clock Prescaler.
PRGEN: General Power Reduction.
PRPA: Power Reduction Port A.
PRPC: Power Reduction Port C.
PRPD: Power Reduction Port D.
PRPE: Power Reduction Port E.
PRPF: Power Reduction Port F.
PSADIV: Bitfield on register PSCTRL
PSBCDIV: Bitfield on register PSCTRL
PSCTRL: Prescaler Control Register.
QDEN: Bitfield on register CH0CTRL
QDIEN: Bitfield on register CH0CTRL
QDIRM: Bitfield on register CH0CTRL
RAMPD: Ramp D.
RAMPX: Ramp X.
RAMPY: Ramp Y.
RAMPZ: Ramp Z.
RC2MCREF: Bitfield on register DFLLCTRL
RC32KCAL: 32kHz Internal Oscillator Calibration Register.
RC32MCREF: Bitfield on register DFLLCTRL
RCOSC2M: RCOSC 2MHz Calibration Value.
RCOSC32K: RCOSC 32kHz Calibration Value.
RCOSC32M: RCOSC 32MHz Calibration Value.
REFCTRL: Reference Control.
REFSEL: Bitfield on register REFCTRL
REMAP: Pin Remap Register (available for PORTC to PORTF only).
RES: Channel Result.
RESH: Channel Result high byte.
RESL: Channel Result low byte.
REVID: Revision ID.
RSTDISBL: Bitfield on register FUSEBYTE4
RTC: Bitfield on register PRGEN
RTCCTRL: RTC Control Register.
RTCEN: Bitfield on register RTCCTRL
RTCSRC: Bitfield on register RTCCTRL
RXCINTLVL: Bitfield on register CTRLA
RXEN: Bitfield on register CTRLB
RXPLCTRL: IrDA Receiver Pulse Length Control Register.
S: Bitfield on register SREG
SAMPCTRL: Sampling Time Control Register.
SAMPVAL: Bitfield on register SAMPCTRL
SBMODE: Bitfield on register CTRLC
SCAN: Input Channel Scan.
SCANNUM: Bitfield on register SCAN
SPH: Stack Pointer High.
SPL: Stack Pointer Low.
SREG: Status Register.
STATUS: Status Register.
STROBE: Event Strobe.
SUT: Bitfield on register FUSEBYTE4
T: Bitfield on register SREG
TC0A: Bitfield on register REMAP
TC0B: Bitfield on register REMAP
TC0C: Bitfield on register REMAP
TC0D: Bitfield on register REMAP
TC1: Bitfield on register PRPC
TEMP: Temporary Register For 16-bit Access.
TEMPREF: Bitfield on register REFCTRL
TEMPSENSE0: Temperature Sensor Calibration Byte 0.
TEMPSENSE1: Temperature Sensor Calibration Byte 0.
TOSCSEL: Bitfield on register FUSEBYTE2
TXB8: Bitfield on register CTRLB
TXCINTLVL: Bitfield on register CTRLA
TXEN: Bitfield on register CTRLB
TXPLCTRL: IrDA Transmitter Pulse Length Control Register.
UCPHA: Bitfield on register CTRLC
UDORD: Bitfield on register CTRLC
V: Bitfield on register SREG
VP0MAP: Bitfield on register VPCTRLA
VP1MAP: Bitfield on register VPCTRLA
VP2MAP: Bitfield on register VPCTRLB
VP3MAP: Bitfield on register VPCTRLB
VPCTRLA: Virtual Port Control Register A.
VPCTRLB: Virtual Port Control Register B.
WAFNUM: Wafer Number.
WDLOCK: Bitfield on register FUSEBYTE4
WDP: Bitfield on register FUSEBYTE1
WDWP: Bitfield on register FUSEBYTE1
WEN: Bitfield on register WINCTRL
WINCTRL: Window Mode Control.
WINTLVL: Bitfield on register WINCTRL
WINTMODE: Bitfield on register WINCTRL
WRCOL: Bitfield on register STATUS
X32KLPM: Bitfield on register XOSCCTRL
XOSCCTRL: External Oscillator Control Register.
XOSCFAIL: External Oscillator Failure Detection Register.
XOSCFDEN: Bitfield on register XOSCFAIL
XOSCFDIF: Bitfield on register XOSCFAIL
XOSCSEL: Bitfield on register XOSCCTRL
Z: Bitfield on register SREG

Module atxmega16d4

Module atxmega16d4 Copy item path

§Variants

Modules§

Constants§

Module atxmega16d4