[−][src]Struct attohttpc::ResponseReader

pub struct ResponseReader { /* fields omitted */ }

The ResponseReader is used to read the body of a response.

The ResponseReader implements Read and can be used like any other stream, but the data returned by Read are untouched bytes from the socket. This means that if a string is expected back, it could be in a different encoding than the expected one. In order to properly read text, use the charsets feature and the text or text_reader methods.

In general it's best to avoid Reading directly from this object. Instead use the helper methods, they process the data stream properly.

Methods

impl ResponseReader[src]

pub fn write_to<W>(self, writer: W) -> Result<u64> where
    W: Write, [src]

Write the response to any object that implements Write.

pub fn bytes(self) -> Result<Vec<u8>>[src]

Read the response to a Vec of bytes.

pub fn text(self) -> Result<String>[src]

Read the response to a String.

If the charsets feature is enabled, it will try to decode the response using the encoding in the headers. If there's no encoding specified in the headers, it will fall back to the default encoding, and if that's also not specified, it will fall back to the default of ISO-8859-1.

If the charsets feature is disabled, this method is the same as calling text_utf8.

pub fn text_with(self, charset: Charset) -> Result<String>[src]

Read the response to a String, decoding with the given Charset.

This will ignore the encoding from the response headers and the default encoding, if any.

This method only exists when the charsets feature is enabled.

ⓘImportant traits for TextReader<R>
pub fn text_reader(self) -> TextReader<BufReader<ResponseReader>>[src]

Create a TextReader from this ResponseReader.

If the response headers contain charset information, that charset will be used to decode the body. Otherwise, if a default encoding is set it will be used. If there is no default encoding, ISO-8859-1 will be used.

This method only exists when the charsets feature is enabled.

ⓘImportant traits for TextReader<R>
pub fn text_reader_with(
    self,
    charset: Charset
) -> TextReader<BufReader<ResponseReader>>[src]

Create a TextReader from this ResponseReader, decoding with the given Charset.

This will ignore the encoding from the response headers and the default encoding, if any.

This method only exists when the charsets feature is enabled.

pub fn text_utf8(self) -> Result<String>[src]

Read the response body to a String using the UTF-8 encoding.

This method ignores headers and the default encoding.

pub fn json<T>(self) -> Result<T> where
    T: DeserializeOwned, [src]

Parse the response as a JSON object and return it.

If the charsets feature is enabled, it will try to decode the response using the encoding in the headers. If there's no encoding specified in the headers, it will fall back to the default encoding, and if that's also not specified, it will fall back to the default of ISO-8859-1.

If the charsets feature is disabled, this method is the same as calling json_utf8.

pub fn json_utf8<T>(self) -> Result<T> where
    T: DeserializeOwned, [src]

Parse the response as a JSON object encoded in UTF-8.

This method ignores headers and the default encoding.

This method only exists when the json feature is enabled.

Trait Implementations

impl Read for ResponseReader[src]

fn read_vectored(&mut self, bufs: &mut [IoVecMut]) -> Result<usize, Error>[src]

🔬 This is a nightly-only experimental API. (iovec)

Like read, except that it reads into a slice of buffers. Read more

unsafe fn initializer(&self) -> Initializer[src]

🔬 This is a nightly-only experimental API. (read_initializer)

Determines if this Reader can work with buffers of uninitialized memory. Read more

fn read_to_end(&mut self, buf: &mut Vec<u8>) -> Result<usize, Error>
1.0.0
[src]

Read all bytes until EOF in this source, placing them into buf. Read more

fn read_to_string(&mut self, buf: &mut String) -> Result<usize, Error>
1.0.0
[src]

Read all bytes until EOF in this source, appending them to buf. Read more

fn read_exact(&mut self, buf: &mut [u8]) -> Result<(), Error>
1.6.0
[src]

Read the exact number of bytes required to fill buf. Read more

fn by_ref(&mut self) -> &mut Self
1.0.0
[src]

Creates a "by reference" adaptor for this instance of Read. Read more

fn bytes(self) -> Bytes<Self>
1.0.0
[src]

Transforms this Read instance to an [Iterator] over its bytes. Read more

fn chain<R>(self, next: R) -> Chain<Self, R> where
    R: Read, 
1.0.0
[src]

Creates an adaptor which will chain this stream with another. Read more

fn take(self, limit: u64) -> Take<Self>
1.0.0
[src]

Creates an adaptor which will read at most limit bytes from it. Read more

Auto Trait Implementations

Blanket Implementations

impl<T, U> Into for T where
    U: From<T>, [src]

impl<T> From for T[src]

impl<T, U> TryFrom for T where
    U: Into<T>, [src]

type Error = Infallible

The type returned in the event of a conversion error.

impl<T> Borrow for T where
    T: ?Sized, [src]

impl<T> Any for T where
    T: 'static + ?Sized, [src]

impl<T> BorrowMut for T where
    T: ?Sized, [src]

impl<T, U> TryInto for T where
    U: TryFrom<T>, [src]

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.

impl<R> ReadBytesExt for R where
    R: Read + ?Sized, 

fn read_u8(&mut self) -> Result<u8, Error>

Reads an unsigned 8 bit integer from the underlying reader. Read more

fn read_i8(&mut self) -> Result<i8, Error>

Reads a signed 8 bit integer from the underlying reader. Read more

fn read_u16<T>(&mut self) -> Result<u16, Error> where
    T: ByteOrder, 

Reads an unsigned 16 bit integer from the underlying reader. Read more

fn read_i16<T>(&mut self) -> Result<i16, Error> where
    T: ByteOrder, 

Reads a signed 16 bit integer from the underlying reader. Read more

fn read_u24<T>(&mut self) -> Result<u32, Error> where
    T: ByteOrder, 

Reads an unsigned 24 bit integer from the underlying reader. Read more

fn read_i24<T>(&mut self) -> Result<i32, Error> where
    T: ByteOrder, 

Reads a signed 24 bit integer from the underlying reader. Read more

fn read_u32<T>(&mut self) -> Result<u32, Error> where
    T: ByteOrder, 

Reads an unsigned 32 bit integer from the underlying reader. Read more

fn read_i32<T>(&mut self) -> Result<i32, Error> where
    T: ByteOrder, 

Reads a signed 32 bit integer from the underlying reader. Read more

fn read_u48<T>(&mut self) -> Result<u64, Error> where
    T: ByteOrder, 

Reads an unsigned 48 bit integer from the underlying reader. Read more

fn read_i48<T>(&mut self) -> Result<i64, Error> where
    T: ByteOrder, 

Reads a signed 48 bit integer from the underlying reader. Read more

fn read_u64<T>(&mut self) -> Result<u64, Error> where
    T: ByteOrder, 

Reads an unsigned 64 bit integer from the underlying reader. Read more

fn read_i64<T>(&mut self) -> Result<i64, Error> where
    T: ByteOrder, 

Reads a signed 64 bit integer from the underlying reader. Read more

fn read_u128<T>(&mut self) -> Result<u128, Error> where
    T: ByteOrder, 

Reads an unsigned 128 bit integer from the underlying reader. Read more

fn read_i128<T>(&mut self) -> Result<i128, Error> where
    T: ByteOrder, 

Reads a signed 128 bit integer from the underlying reader. Read more

fn read_uint<T>(&mut self, nbytes: usize) -> Result<u64, Error> where
    T: ByteOrder, 

Reads an unsigned n-bytes integer from the underlying reader. Read more

fn read_int<T>(&mut self, nbytes: usize) -> Result<i64, Error> where
    T: ByteOrder, 

Reads a signed n-bytes integer from the underlying reader. Read more

fn read_uint128<T>(&mut self, nbytes: usize) -> Result<u128, Error> where
    T: ByteOrder, 

Reads an unsigned n-bytes integer from the underlying reader.

fn read_int128<T>(&mut self, nbytes: usize) -> Result<i128, Error> where
    T: ByteOrder, 

Reads a signed n-bytes integer from the underlying reader.

fn read_f32<T>(&mut self) -> Result<f32, Error> where
    T: ByteOrder, 

Reads a IEEE754 single-precision (4 bytes) floating point number from the underlying reader. Read more

fn read_f64<T>(&mut self) -> Result<f64, Error> where
    T: ByteOrder, 

Reads a IEEE754 double-precision (8 bytes) floating point number from the underlying reader. Read more

fn read_u16_into<T>(&mut self, dst: &mut [u16]) -> Result<(), Error> where
    T: ByteOrder, 

Reads a sequence of unsigned 16 bit integers from the underlying reader. Read more

fn read_u32_into<T>(&mut self, dst: &mut [u32]) -> Result<(), Error> where
    T: ByteOrder, 

Reads a sequence of unsigned 32 bit integers from the underlying reader. Read more

fn read_u64_into<T>(&mut self, dst: &mut [u64]) -> Result<(), Error> where
    T: ByteOrder, 

Reads a sequence of unsigned 64 bit integers from the underlying reader. Read more

fn read_u128_into<T>(&mut self, dst: &mut [u128]) -> Result<(), Error> where
    T: ByteOrder, 

Reads a sequence of unsigned 128 bit integers from the underlying reader. Read more

fn read_i16_into<T>(&mut self, dst: &mut [i16]) -> Result<(), Error> where
    T: ByteOrder, 

Reads a sequence of signed 16 bit integers from the underlying reader. Read more

fn read_i32_into<T>(&mut self, dst: &mut [i32]) -> Result<(), Error> where
    T: ByteOrder, 

Reads a sequence of signed 32 bit integers from the underlying reader. Read more

fn read_i64_into<T>(&mut self, dst: &mut [i64]) -> Result<(), Error> where
    T: ByteOrder, 

Reads a sequence of signed 64 bit integers from the underlying reader. Read more

fn read_i128_into<T>(&mut self, dst: &mut [i128]) -> Result<(), Error> where
    T: ByteOrder, 

Reads a sequence of signed 128 bit integers from the underlying reader. Read more

fn read_f32_into<T>(&mut self, dst: &mut [f32]) -> Result<(), Error> where
    T: ByteOrder, 

Reads a sequence of IEEE754 single-precision (4 bytes) floating point numbers from the underlying reader. Read more

fn read_f32_into_unchecked<T>(&mut self, dst: &mut [f32]) -> Result<(), Error> where
    T: ByteOrder, 

Deprecated since 1.2.0:

please use read_f32_into instead

DEPRECATED. Read more

fn read_f64_into<T>(&mut self, dst: &mut [f64]) -> Result<(), Error> where
    T: ByteOrder, 

Reads a sequence of IEEE754 double-precision (8 bytes) floating point numbers from the underlying reader. Read more

fn read_f64_into_unchecked<T>(&mut self, dst: &mut [f64]) -> Result<(), Error> where
    T: ByteOrder, 

Deprecated since 1.2.0:

please use read_f64_into instead

DEPRECATED. Read more