[−][src]Enum atsams70q19b::sdramc::sdramc_mr::MODER
Possible values of the field MODE
Variants
NORMAL
Normal mode. Any access to the SDRAM is decoded normally. To activate this mode, the command must be followed by a write to the SDRAM.
NOP
The SDRAMC issues a NOP command when the SDRAM device is accessed regardless of the cycle. To activate this mode, the command must be followed by a write to the SDRAM.
ALLBANKS_PRECHARGE
The SDRAMC issues an 'All Banks Precharge' command when the SDRAM device is accessed regardless of the cycle. To activate this mode, the command must be followed by a write to the SDRAM.
LOAD_MODEREG
The SDRAMC issues a 'Load Mode Register' command when the SDRAM device is accessed regardless of the cycle. To activate this mode, the command must be followed by a write to the SDRAM.
AUTO_REFRESH
The SDRAMC issues an 'Auto-Refresh' Command when the SDRAM device is accessed regardless of the cycle. Previously, an 'All Banks Precharge' command must be issued. To activate this mode, the command must be followed by a write to the SDRAM.
EXT_LOAD_MODEREG
The SDRAMC issues an 'Extended Load Mode Register' command when the SDRAM device is accessed regardless of the cycle. To activate this mode, the 'Extended Load Mode Register' command must be followed by a write to the SDRAM. The write in the SDRAM must be done in the appropriate bank; most low-power SDRAM devices use the bank 1.
DEEP_POWERDOWN
Deep Power-down mode. Enters Deep Power-down mode.
Trait Implementations
impl ToBits<u8> for MODER
[src]
impl Debug for MODER
[src]
impl PartialEq<MODER> for MODER
[src]
fn eq(&self, other: &MODER) -> bool
[src]
#[must_use]
fn ne(&self, other: &Rhs) -> bool
1.0.0[src]
This method tests for !=
.
impl Copy for MODER
[src]
impl Clone for MODER
[src]
Auto Trait Implementations
Blanket Implementations
impl<T, U> TryFrom<U> for T where
U: Into<T>,
[src]
U: Into<T>,
type Error = Infallible
The type returned in the event of a conversion error.
fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>
[src]
impl<T, U> Into<U> for T where
U: From<T>,
[src]
U: From<T>,
impl<T> From<T> for T
[src]
impl<T, U> TryInto<U> for T where
U: TryFrom<T>,
[src]
U: TryFrom<T>,
type Error = <U as TryFrom<T>>::Error
The type returned in the event of a conversion error.
fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>
[src]
impl<T> Borrow<T> for T where
T: ?Sized,
[src]
T: ?Sized,
impl<T> BorrowMut<T> for T where
T: ?Sized,
[src]
T: ?Sized,
fn borrow_mut(&mut self) -> &mut T
[src]
impl<T> Any for T where
T: 'static + ?Sized,
[src]
T: 'static + ?Sized,
impl<T> Same<T> for T
type Output = T
Should always be Self