[−][src]Type Definition atsame70n20b::hsmci::hsmci_sr::R
type R = R<u32, HSMCI_SR>;
Reader of register HSMCI_SR
Implementations
impl R
[src]
pub fn cmdrdy(&self) -> CMDRDY_R
[src]
Bit 0 - Command Ready (cleared by writing in HSMCI_CMDR)
pub fn rxrdy(&self) -> RXRDY_R
[src]
Bit 1 - Receiver Ready (cleared by reading HSMCI_RDR)
pub fn txrdy(&self) -> TXRDY_R
[src]
Bit 2 - Transmit Ready (cleared by writing in HSMCI_TDR)
pub fn blke(&self) -> BLKE_R
[src]
Bit 3 - Data Block Ended (cleared on read)
pub fn dtip(&self) -> DTIP_R
[src]
Bit 4 - Data Transfer in Progress (cleared at the end of CRC16 calculation)
pub fn notbusy(&self) -> NOTBUSY_R
[src]
Bit 5 - HSMCI Not Busy
pub fn sdioirqa(&self) -> SDIOIRQA_R
[src]
Bit 8 - SDIO Interrupt for Slot A (cleared on read)
pub fn sdiowait(&self) -> SDIOWAIT_R
[src]
Bit 12 - SDIO Read Wait Operation Status
pub fn csrcv(&self) -> CSRCV_R
[src]
Bit 13 - CE-ATA Completion Signal Received (cleared on read)
pub fn rinde(&self) -> RINDE_R
[src]
Bit 16 - Response Index Error (cleared by writing in HSMCI_CMDR)
pub fn rdire(&self) -> RDIRE_R
[src]
Bit 17 - Response Direction Error (cleared by writing in HSMCI_CMDR)
pub fn rcrce(&self) -> RCRCE_R
[src]
Bit 18 - Response CRC Error (cleared by writing in HSMCI_CMDR)
pub fn rende(&self) -> RENDE_R
[src]
Bit 19 - Response End Bit Error (cleared by writing in HSMCI_CMDR)
pub fn rtoe(&self) -> RTOE_R
[src]
Bit 20 - Response Time-out Error (cleared by writing in HSMCI_CMDR)
pub fn dcrce(&self) -> DCRCE_R
[src]
Bit 21 - Data CRC Error (cleared on read)
pub fn dtoe(&self) -> DTOE_R
[src]
Bit 22 - Data Time-out Error (cleared on read)
pub fn cstoe(&self) -> CSTOE_R
[src]
Bit 23 - Completion Signal Time-out Error (cleared on read)
pub fn blkovre(&self) -> BLKOVRE_R
[src]
Bit 24 - DMA Block Overrun Error (cleared on read)
pub fn fifoempty(&self) -> FIFOEMPTY_R
[src]
Bit 26 - FIFO empty flag
pub fn xfrdone(&self) -> XFRDONE_R
[src]
Bit 27 - Transfer Done flag
pub fn ackrcv(&self) -> ACKRCV_R
[src]
Bit 28 - Boot Operation Acknowledge Received (cleared on read)
pub fn ackrcve(&self) -> ACKRCVE_R
[src]
Bit 29 - Boot Operation Acknowledge Error (cleared on read)
pub fn ovre(&self) -> OVRE_R
[src]
Bit 30 - Overrun (if FERRCTRL = 1, cleared by writing in HSMCI_CMDR or cleared on read if FERRCTRL = 0)
pub fn unre(&self) -> UNRE_R
[src]
Bit 31 - Underrun (if FERRCTRL = 1, cleared by writing in HSMCI_CMDR or cleared on read if FERRCTRL = 0)