#[doc = "Register `INTENSET` reader"]
pub type R = crate::R<INTENSET_SPEC>;
#[doc = "Register `INTENSET` writer"]
pub type W = crate::W<INTENSET_SPEC>;
#[doc = "Field `BOD33RDY` reader - BOD33 Ready"]
pub type BOD33RDY_R = crate::BitReader;
#[doc = "Field `BOD33RDY` writer - BOD33 Ready"]
pub type BOD33RDY_W<'a, REG, const O: u8> = crate::BitWriter<'a, REG, O>;
#[doc = "Field `BOD33DET` reader - BOD33 Detection"]
pub type BOD33DET_R = crate::BitReader;
#[doc = "Field `BOD33DET` writer - BOD33 Detection"]
pub type BOD33DET_W<'a, REG, const O: u8> = crate::BitWriter<'a, REG, O>;
#[doc = "Field `B33SRDY` reader - BOD33 Synchronization Ready"]
pub type B33SRDY_R = crate::BitReader;
#[doc = "Field `B33SRDY` writer - BOD33 Synchronization Ready"]
pub type B33SRDY_W<'a, REG, const O: u8> = crate::BitWriter<'a, REG, O>;
#[doc = "Field `VREGRDY` reader - Voltage Regulator Ready"]
pub type VREGRDY_R = crate::BitReader;
#[doc = "Field `VREGRDY` writer - Voltage Regulator Ready"]
pub type VREGRDY_W<'a, REG, const O: u8> = crate::BitWriter<'a, REG, O>;
#[doc = "Field `VCORERDY` reader - VDDCORE Ready"]
pub type VCORERDY_R = crate::BitReader;
#[doc = "Field `VCORERDY` writer - VDDCORE Ready"]
pub type VCORERDY_W<'a, REG, const O: u8> = crate::BitWriter<'a, REG, O>;
impl R {
#[doc = "Bit 0 - BOD33 Ready"]
#[inline(always)]
pub fn bod33rdy(&self) -> BOD33RDY_R {
BOD33RDY_R::new((self.bits & 1) != 0)
}
#[doc = "Bit 1 - BOD33 Detection"]
#[inline(always)]
pub fn bod33det(&self) -> BOD33DET_R {
BOD33DET_R::new(((self.bits >> 1) & 1) != 0)
}
#[doc = "Bit 2 - BOD33 Synchronization Ready"]
#[inline(always)]
pub fn b33srdy(&self) -> B33SRDY_R {
B33SRDY_R::new(((self.bits >> 2) & 1) != 0)
}
#[doc = "Bit 8 - Voltage Regulator Ready"]
#[inline(always)]
pub fn vregrdy(&self) -> VREGRDY_R {
VREGRDY_R::new(((self.bits >> 8) & 1) != 0)
}
#[doc = "Bit 10 - VDDCORE Ready"]
#[inline(always)]
pub fn vcorerdy(&self) -> VCORERDY_R {
VCORERDY_R::new(((self.bits >> 10) & 1) != 0)
}
}
impl W {
#[doc = "Bit 0 - BOD33 Ready"]
#[inline(always)]
#[must_use]
pub fn bod33rdy(&mut self) -> BOD33RDY_W<INTENSET_SPEC, 0> {
BOD33RDY_W::new(self)
}
#[doc = "Bit 1 - BOD33 Detection"]
#[inline(always)]
#[must_use]
pub fn bod33det(&mut self) -> BOD33DET_W<INTENSET_SPEC, 1> {
BOD33DET_W::new(self)
}
#[doc = "Bit 2 - BOD33 Synchronization Ready"]
#[inline(always)]
#[must_use]
pub fn b33srdy(&mut self) -> B33SRDY_W<INTENSET_SPEC, 2> {
B33SRDY_W::new(self)
}
#[doc = "Bit 8 - Voltage Regulator Ready"]
#[inline(always)]
#[must_use]
pub fn vregrdy(&mut self) -> VREGRDY_W<INTENSET_SPEC, 8> {
VREGRDY_W::new(self)
}
#[doc = "Bit 10 - VDDCORE Ready"]
#[inline(always)]
#[must_use]
pub fn vcorerdy(&mut self) -> VCORERDY_W<INTENSET_SPEC, 10> {
VCORERDY_W::new(self)
}
#[doc = r" Writes raw bits to the register."]
#[doc = r""]
#[doc = r" # Safety"]
#[doc = r""]
#[doc = r" Passing incorrect value can cause undefined behaviour. See reference manual"]
#[inline(always)]
pub unsafe fn bits(&mut self, bits: u32) -> &mut Self {
self.bits = bits;
self
}
}
#[doc = "Interrupt Enable Set\n\nYou can [`read`](crate::generic::Reg::read) this register and get [`intenset::R`](R). You can [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`write_with_zero`](crate::generic::Reg::write_with_zero) this register using [`intenset::W`](W). You can also [`modify`](crate::generic::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
pub struct INTENSET_SPEC;
impl crate::RegisterSpec for INTENSET_SPEC {
type Ux = u32;
}
#[doc = "`read()` method returns [`intenset::R`](R) reader structure"]
impl crate::Readable for INTENSET_SPEC {}
#[doc = "`write(|w| ..)` method takes [`intenset::W`](W) writer structure"]
impl crate::Writable for INTENSET_SPEC {
const ZERO_TO_MODIFY_FIELDS_BITMAP: Self::Ux = 0;
const ONE_TO_MODIFY_FIELDS_BITMAP: Self::Ux = 0;
}
#[doc = "`reset()` method sets INTENSET to value 0"]
impl crate::Resettable for INTENSET_SPEC {
const RESET_VALUE: Self::Ux = 0;
}