Expand description
Module implementing all the different commands supported by the chip
Every SPI Frame has a Command Header to request the specific action
Structs§
- Adax
- Start GPIOs ADC Conversion and Poll Status
- Adaxd
- Start GPIOs ADC Conversion with Digital Redundancy and Poll Status
- Adcv
- Start Cell Voltage ADC Conversion and Poll Status
- Adcvax
- Start Combined Cell Voltage and GPIO1, GPIO2 Conversion and Poll Status
- Adcvsc
- Start Combined Cell Voltage and SC Conversion and Poll Status
- Adol
- Start Overlap Measurements on Cell 7 and Cell 13 (only LTC6812/13) Voltages
- Adow
- Start Open Wire ADC Conversion and Poll Status
- Adstat
- Start Status Group ADC Conversion and Poll Status
- Adstatd
- Start Status Group ADC Conversion with Digital Redundancy and Poll Status
- Axow
- Start GPIOs Open Wire ADC Conversion and Poll Status
- Axst
- Start Self Test GPIOs COnversion and Poll Status
- Clraux
- Clear Auxiliary Register Groups
- Clrcell
- Clear Cell Voltage Register Groups
- Clrstat
- Clear Status Register Groups
- Cvst
- Start Self Test Cell Voltage Conversion and Poll Status
- Diagn
- Diagnose MUX and Poll Status
- Pladc
- Poll ADC COnversion Status
- RdAuxA
- Read Auxiliary Register Group A
- RdAuxB
- Read Auxiliary Register Group B
- RdAuxC
- Read Auxiliary Register Group C
- RdAuxD
- Read Auxiliary Register Group D
- RdCfgA
- Read Configuration Register Group A
- RdCfgB
- Read Configuration Register Group B
- RdComm
- Read COMM Register Group
- RdCvA
- Read Cell Voltage Register Group A
- RdCvB
- Read Cell Voltage Register Group B
- RdCvC
- Read Cell Voltage Register Group C
- RdCvD
- Read Cell Voltage Register Group D
- RdCvE
- Read Cell Voltage Register Group E
- RdCvF
- Read Cell Voltage Register Group F
- RdStatA
- Read Status Register Group A
- RdStatB
- Read Status Register Group A
- StComm
- Start I2C/SPO Communication
- Statst
- Start Self Test Status Group Conversion and Poll Status
- WrCfgA
- Write Configuration Register Group A
- WrCfgB
- Write Configuration Register Group B
- WrComm
- Write COMM Register Group
Enums§
- Cell
Channel Config - Defines valid Channel config for all cell voltage conversion commands implementing
HasCellChannelConfig - Gpio
Channel Config - Defines valid Channel config for all GPIO conversion commands implementing
HasGpioChannelConfig - MDSetting
- Defines the different allowed MD Bit Settings
- Self
Test Config - Defining the two Selftest Configs
- Status
Channel Config - Defines valid Channel config for all Status conversion commands implementing
HasStatusChannelConfig
Traits§
- HasCell
Channel Config - Marks all Commands that have a Channel Config for the cell voltage ADCs and provides method to set the channel config
- HasDCP
Option - Marks all Commands implementing the DCP Option and provides method to set DCP
- HasGpio
Channel Config - Marks all Commands that have a Channel Config for the GPIO ADCs and provides method to set the channel config
- HasMD
Option - Marks all Commands implementing MD Bit Settings and provide method to set MD Settings
- HasPull
UpOption - HasST
Config - Marks all Commands that have a Selftest Config Option and provides a method to set the config
- HasStatus
Channel Config - Marks all Commands that have a Channel Config for the Status ADCs and provides method to set the channel config
- IsCmd
- Interface Trait for data which all commands provide