Struct artnet_protocol::ArtTalkToMe [−]
pub struct ArtTalkToMe { /* fields omitted */ }
The TalkToMe flag, as to be used in the Poll
and PollReply
message
Methods
impl ArtTalkToMe
impl ArtTalkToMe
pub const ENABLE_VLC: ArtTalkToMe
ENABLE_VLC: ArtTalkToMe = ArtTalkToMe{bits: 16,}
Enable VLC transmission if set, disabled otherwise
pub const UNICAST_DIAGNOSTICS: ArtTalkToMe
UNICAST_DIAGNOSTICS: ArtTalkToMe = ArtTalkToMe{bits: 8,}
Diagnostic messages are unicast. If this is not set, the messages are broadcast. Has no effect if ENABLE_DIAGNOSTICS
is not set.
pub const ENABLE_DIAGNOSTICS: ArtTalkToMe
ENABLE_DIAGNOSTICS: ArtTalkToMe = ArtTalkToMe{bits: 4,}
Enable diagnostics
pub const EMIT_CHANGES: ArtTalkToMe
EMIT_CHANGES: ArtTalkToMe = ArtTalkToMe{bits: 2,}
Configure the nodes to send ArtPollReply whenever something changes on their end. If this is not set, the devices will only send ArtPollReply if ArtPoll is send.
pub const NONE: ArtTalkToMe
NONE: ArtTalkToMe = ArtTalkToMe{bits: 0,}
No flags
pub fn empty() -> ArtTalkToMe
pub fn empty() -> ArtTalkToMe
Returns an empty set of flags.
pub fn all() -> ArtTalkToMe
pub fn all() -> ArtTalkToMe
Returns the set containing all flags.
pub fn bits(&self) -> u8
pub fn bits(&self) -> u8
Returns the raw value of the flags currently stored.
pub fn from_bits(bits: u8) -> Option<ArtTalkToMe>
pub fn from_bits(bits: u8) -> Option<ArtTalkToMe>
Convert from underlying bit representation, unless that representation contains bits that do not correspond to a flag.
pub fn from_bits_truncate(bits: u8) -> ArtTalkToMe
pub fn from_bits_truncate(bits: u8) -> ArtTalkToMe
Convert from underlying bit representation, dropping any bits that do not correspond to flags.
pub fn is_empty(&self) -> bool
pub fn is_empty(&self) -> bool
Returns true
if no flags are currently stored.
pub fn is_all(&self) -> bool
pub fn is_all(&self) -> bool
Returns true
if all flags are currently set.
pub fn intersects(&self, other: ArtTalkToMe) -> bool
pub fn intersects(&self, other: ArtTalkToMe) -> bool
Returns true
if there are flags common to both self
and other
.
pub fn contains(&self, other: ArtTalkToMe) -> bool
pub fn contains(&self, other: ArtTalkToMe) -> bool
Returns true
all of the flags in other
are contained within self
.
pub fn insert(&mut self, other: ArtTalkToMe)
pub fn insert(&mut self, other: ArtTalkToMe)
Inserts the specified flags in-place.
pub fn remove(&mut self, other: ArtTalkToMe)
pub fn remove(&mut self, other: ArtTalkToMe)
Removes the specified flags in-place.
pub fn toggle(&mut self, other: ArtTalkToMe)
pub fn toggle(&mut self, other: ArtTalkToMe)
Toggles the specified flags in-place.
pub fn set(&mut self, other: ArtTalkToMe, value: bool)
pub fn set(&mut self, other: ArtTalkToMe, value: bool)
Inserts or removes the specified flags depending on the passed value.
Trait Implementations
impl Copy for ArtTalkToMe
impl Copy for ArtTalkToMe
impl PartialEq for ArtTalkToMe
impl PartialEq for ArtTalkToMe
fn eq(&self, other: &ArtTalkToMe) -> bool
fn eq(&self, other: &ArtTalkToMe) -> bool
This method tests for self
and other
values to be equal, and is used by ==
. Read more
fn ne(&self, other: &ArtTalkToMe) -> bool
fn ne(&self, other: &ArtTalkToMe) -> bool
This method tests for !=
.
impl Eq for ArtTalkToMe
impl Eq for ArtTalkToMe
impl Clone for ArtTalkToMe
impl Clone for ArtTalkToMe
fn clone(&self) -> ArtTalkToMe
fn clone(&self) -> ArtTalkToMe
Returns a copy of the value. Read more
fn clone_from(&mut self, source: &Self)
1.0.0[src]
fn clone_from(&mut self, source: &Self)
Performs copy-assignment from source
. Read more
impl PartialOrd for ArtTalkToMe
impl PartialOrd for ArtTalkToMe
fn partial_cmp(&self, other: &ArtTalkToMe) -> Option<Ordering>
fn partial_cmp(&self, other: &ArtTalkToMe) -> Option<Ordering>
This method returns an ordering between self
and other
values if one exists. Read more
fn lt(&self, other: &ArtTalkToMe) -> bool
fn lt(&self, other: &ArtTalkToMe) -> bool
This method tests less than (for self
and other
) and is used by the <
operator. Read more
fn le(&self, other: &ArtTalkToMe) -> bool
fn le(&self, other: &ArtTalkToMe) -> bool
This method tests less than or equal to (for self
and other
) and is used by the <=
operator. Read more
fn gt(&self, other: &ArtTalkToMe) -> bool
fn gt(&self, other: &ArtTalkToMe) -> bool
This method tests greater than (for self
and other
) and is used by the >
operator. Read more
fn ge(&self, other: &ArtTalkToMe) -> bool
fn ge(&self, other: &ArtTalkToMe) -> bool
This method tests greater than or equal to (for self
and other
) and is used by the >=
operator. Read more
impl Ord for ArtTalkToMe
impl Ord for ArtTalkToMe
fn cmp(&self, other: &ArtTalkToMe) -> Ordering
fn cmp(&self, other: &ArtTalkToMe) -> Ordering
This method returns an Ordering
between self
and other
. Read more
fn max(self, other: Self) -> Self
1.21.0[src]
fn max(self, other: Self) -> Self
Compares and returns the maximum of two values. Read more
fn min(self, other: Self) -> Self
1.21.0[src]
fn min(self, other: Self) -> Self
Compares and returns the minimum of two values. Read more
impl Hash for ArtTalkToMe
impl Hash for ArtTalkToMe
fn hash<__H: Hasher>(&self, state: &mut __H)
fn hash<__H: Hasher>(&self, state: &mut __H)
Feeds this value into the given [Hasher
]. Read more
fn hash_slice<H>(data: &[Self], state: &mut H) where
H: Hasher,
1.3.0[src]
fn hash_slice<H>(data: &[Self], state: &mut H) where
H: Hasher,
Feeds a slice of this type into the given [Hasher
]. Read more
impl Debug for ArtTalkToMe
impl Debug for ArtTalkToMe
impl Binary for ArtTalkToMe
impl Binary for ArtTalkToMe
impl Octal for ArtTalkToMe
impl Octal for ArtTalkToMe
impl LowerHex for ArtTalkToMe
impl LowerHex for ArtTalkToMe
impl UpperHex for ArtTalkToMe
impl UpperHex for ArtTalkToMe
impl BitOr for ArtTalkToMe
impl BitOr for ArtTalkToMe
type Output = ArtTalkToMe
The resulting type after applying the |
operator.
fn bitor(self, other: ArtTalkToMe) -> ArtTalkToMe
fn bitor(self, other: ArtTalkToMe) -> ArtTalkToMe
Returns the union of the two sets of flags.
impl BitOrAssign for ArtTalkToMe
impl BitOrAssign for ArtTalkToMe
fn bitor_assign(&mut self, other: ArtTalkToMe)
fn bitor_assign(&mut self, other: ArtTalkToMe)
Adds the set of flags.
impl BitXor for ArtTalkToMe
impl BitXor for ArtTalkToMe
type Output = ArtTalkToMe
The resulting type after applying the ^
operator.
fn bitxor(self, other: ArtTalkToMe) -> ArtTalkToMe
fn bitxor(self, other: ArtTalkToMe) -> ArtTalkToMe
Returns the left flags, but with all the right flags toggled.
impl BitXorAssign for ArtTalkToMe
impl BitXorAssign for ArtTalkToMe
fn bitxor_assign(&mut self, other: ArtTalkToMe)
fn bitxor_assign(&mut self, other: ArtTalkToMe)
Toggles the set of flags.
impl BitAnd for ArtTalkToMe
impl BitAnd for ArtTalkToMe
type Output = ArtTalkToMe
The resulting type after applying the &
operator.
fn bitand(self, other: ArtTalkToMe) -> ArtTalkToMe
fn bitand(self, other: ArtTalkToMe) -> ArtTalkToMe
Returns the intersection between the two sets of flags.
impl BitAndAssign for ArtTalkToMe
impl BitAndAssign for ArtTalkToMe
fn bitand_assign(&mut self, other: ArtTalkToMe)
fn bitand_assign(&mut self, other: ArtTalkToMe)
Disables all flags disabled in the set.
impl Sub for ArtTalkToMe
impl Sub for ArtTalkToMe
type Output = ArtTalkToMe
The resulting type after applying the -
operator.
fn sub(self, other: ArtTalkToMe) -> ArtTalkToMe
fn sub(self, other: ArtTalkToMe) -> ArtTalkToMe
Returns the set difference of the two sets of flags.
impl SubAssign for ArtTalkToMe
impl SubAssign for ArtTalkToMe
fn sub_assign(&mut self, other: ArtTalkToMe)
fn sub_assign(&mut self, other: ArtTalkToMe)
Disables all flags enabled in the set.
impl Not for ArtTalkToMe
impl Not for ArtTalkToMe
type Output = ArtTalkToMe
The resulting type after applying the !
operator.
fn not(self) -> ArtTalkToMe
fn not(self) -> ArtTalkToMe
Returns the complement of this set of flags.
impl Extend<ArtTalkToMe> for ArtTalkToMe
impl Extend<ArtTalkToMe> for ArtTalkToMe
fn extend<T: IntoIterator<Item = ArtTalkToMe>>(&mut self, iterator: T)
fn extend<T: IntoIterator<Item = ArtTalkToMe>>(&mut self, iterator: T)
Extends a collection with the contents of an iterator. Read more
impl FromIterator<ArtTalkToMe> for ArtTalkToMe
impl FromIterator<ArtTalkToMe> for ArtTalkToMe
fn from_iter<T: IntoIterator<Item = ArtTalkToMe>>(iterator: T) -> ArtTalkToMe
fn from_iter<T: IntoIterator<Item = ArtTalkToMe>>(iterator: T) -> ArtTalkToMe
Creates a value from an iterator. Read more
Auto Trait Implementations
impl Send for ArtTalkToMe
impl Send for ArtTalkToMe
impl Sync for ArtTalkToMe
impl Sync for ArtTalkToMe